Samsung Electronics Co STHN375 Dual-Mode Cellular (AMPS/TDMA) Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	219215
Application ID	XqaPUolkMBeA4mQyMkKNuw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.63kB (582909 bits)
Date Submitted	2002-01-04 00:00:00
Date Available	2002-03-07 00:00:00
Creation Date	2001-11-07 09:58:01
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2001-11-07 10:16:45
Document Title	Users Manual

* Some contents in this manual may differ from your phone depending on
the software of the phone or your service provider.
TDMA MOBILE
TELEPHONE
STH-N375
Draft
(200
ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No. : GH68-xxxxxA
English. 11/2001. Rev. 1.0
Please, be sure to read this
manual before using your phone.
And keep the manual after
reading it and use any time you
have a question.
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission (FCC) of
the United States with its action in Report and Order FCC 96-326
adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC
guidelines and these international standards.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call quality,
damage the phone, or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may
result. Please contact your local dealer for replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations using
the optional belt-clip/holster placed 0.78 inches (2.0cm) from the
body. To comply with FCC RF exposure requirements, a minimum
separation distance of 0.78 inches (2.0cm) must be maintained
between the user’s body and the phone, including the antenna.
The use of third-party belt-clips/ holsters with no metallic
components that provide the minimum separation distance of
0.78 inches (2.0cm) can be used to satisfy FCC RF exposure
requirements. The use of non-tested accessories or other bodyworn operations may not comply with FCC RF exposure
requirements and should be avoided. Contact your local dealer
for optional accessory items.
Vehicle Mounted External Antenna (optional, if
available.)
A minimum separation distance of 7.9 inches (20cm) must be
maintained Between a person and the vehicle mounted external
antenna to satisfy FCC RF exposure requirements.
For more information about RF exposure, please visit the FCC
website at www.fcc.gov
SAR Information & FCC ID Labeling
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement know as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR
are conducted using standard operating positions specified by
the FCC with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR
level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for
each model. The highest SAR value for this model phone when
tested for use at the ear is 1.484 W/kg and when worn on the
body, as described in this user guide, is 1.240 W/kg . (Body-worn
measurements differ among phone models, depending upon
available accessories and FCC requirements). While there may
be differences between the SAR levels of various phones and at
various positions, they all meet the government requirement for
safe exposure.
ii
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID A3LSTHN270.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com (see
note).
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and
to account for any variations in measurements.
Note: The URL http://phonefacts.net may be used in place
of http://www.wow-com.com for direct access to SAR
information.
Contents
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Your Phone
Phone Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Getting Started
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Charging a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Switching the Phone On/Off . . . . . . . . . . . . . . . . . . . . . 17
Locking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
General Functions
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Making a Call from the Phonebook . . . . . . . . . . . . . . . . 20
Redialing the Last Number . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Viewing Missed Calls . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Quick-switching to Silent Mode . . . . . . . . . . . . . . . . . . . . 24
Selecting Functions and Options
Using the Soft Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Selecting Functions and Options . . . . . . . . . . . . . . . . . . . 26
Example: Setting the Display Language . . . . . . . . . . . . 27
Phonebook
Storing a Phone Number with a Name . . . . . . . . . . . . . 29
Speed Dialing by Memory Location . . . . . . . . . . . . . . . 31
Phonebook Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Searching for and Dialing
a Number in the Phonebook . . . . . . . . . . . . . . . . . 35
Name Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
iii
In-Call Options
Phone Settings
Muting/Sending Key Tones . . . . . . . . . . . . . . . . . . . . . . 39
Searching for a Number in the Phonebook . . . . . . . . . . 40
Using the SMS Service . . . . . . . . . . . . . . . . . . . . . . . . 41
Making a Calling card call . . . . . . . . . . . . . . . . . . . . . . . . 41
Making the Voice Call Private . . . . . . . . . . . . . . . . . . . . . . 42
Putting a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Answering a Second Call . . . . . . . . . . . . . . . . . . . . . . . 43
Making a Conference Call . . . . . . . . . . . . . . . . . . . . . . 44
Greeting Message (Menu 4.1). . . . . . . . . . . . . . . . . . . . 66
LCD Control (Menu 4.2) . . . . . . . . . . . . . . . . . . . . . . . . . 66
Service Light (Menu 4.3) . . . . . . . . . . . . . . . . . . . . . . . . 67
Auto Redial (Menu 4.4) . . . . . . . . . . . . . . . . . . . . . . . . . 68
Answer Mode (Menu 4.5) . . . . . . . . . . . . . . . . . . . . . . . 68
Slide Menu (Menu 4.6) . . . . . . . . . . . . . . . . . . . . . . . . . 69
Language (Menu 4.7) . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Reset Settings (Menu 4.8) . . . . . . . . . . . . . . . . . . . . . . . 69
Calling card (Menu 4.9) . . . . . . . . . . . . . . . . . . . . . . . . 70
User Changeable Key (Menu 4.10) . . . . . . . . . . . . . . . . 73
Using the Menus
Accessing a Menu Function by scrolling . . . . . . . . . . . 45
Accessing a Menu Function by Using its Shortcut . . . . 46
List of Menu Functions . . . . . . . . . . . . . . . . . . . . . . . . . 47
Call Records
Missed Calls (Menu 1.1) . . . . . . . . . . . . . . . . . . . . . . . . 51
Incoming Calls (Menu 1.2) . . . . . . . . . . . . . . . . . . . . . . 51
Outgoing Calls (Menu 1.3) . . . . . . . . . . . . . . . . . . . . . . . 52
Call Time (Menu 1.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Messages
Voice Mail (Menu 2.1). . . . . . . . . . . . . . . . . . . . . . . . . . 53
Read Messages (Menu 2.2) . . . . . . . . . . . . . . . . . . . . . 54
Write Messages (Menu 2.3) . . . . . . . . . . . . . . . . . . . . . 56
Preset Message List (Menu 2.4) . . . . . . . . . . . . . . . . . . 57
Setup (Menu 2.5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Sound Settings
Ring Volume (Menu 3.1) . . . . . . . . . . . . . . . . . . . . . . . . 60
Ring Tone (Menu 3.2) . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Alert Type (Menu 3.3) . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Tone Length (Menu 3.4) . . . . . . . . . . . . . . . . . . . . . . . . 61
Message Tone (Menu 3.5) . . . . . . . . . . . . . . . . . . . . . . 62
Error Tone (Menu 3.6) . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Minute Minder (Menu 3.7) . . . . . . . . . . . . . . . . . . . . . . 63
Connect Tone (Menu 3.8) . . . . . . . . . . . . . . . . . . . . . . . 63
Melody Composer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Organizer
Calendar (Menu 5.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
To Do List (Menu 5.2) . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Time & Date (Menu 5.3) . . . . . . . . . . . . . . . . . . . . . . . . 78
Alarm (Menu 5.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Calculator (Menu 5.5) . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Security
Change Lock code (Menu 6.1) . . . . . . . . . . . . . . . . . . . 82
Change Security code (Menu 6.2) . . . . . . . . . . . . . . . . . 82
Call Restriction (Menu 6.3) . . . . . . . . . . . . . . . . . . . . . . 83
SOS Call List (Menu 6.4) . . . . . . . . . . . . . . . . . . . . . . . . 84
* Network Services
* Call Diverting (Menu 7.1)
. . . . . . . . . . . . . . . . . . . . . . . 85
Call Waiting (Menu 7.2) . . . . . . . . . . . . . . . . . . . . . . . . 86
Network Selection (Menu 7.3) . . . . . . . . . . . . . . . . . . . 86
Voice Privacy (Menu 7.4) . . . . . . . . . . . . . . . . . . . . . . . 88
NAM Selection(Menu 7.5) . . . . . . . . . . . . . . . . . . . . . . 88
Set Service Code(Menu 7.6) . . . . . . . . . . . . . . . . . . . . . 89
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Voice Memo Pad
Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Replay & Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Edit Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
when you set the service code in the Set Service Code
* available
menu option (7.6).
Quick Safety Guide
Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Health and Safety Information
Exposure to Radio Frequency (RF) Signals . . . . . . . . . . 98
Precaution When Using Batteries . . . . . . . . . . . . . . . . 101
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . 105
Electronic Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Potentially Explosive Atmospheres . . . . . . . . . . . . . . . 108
Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 111
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Quick Reference Card . . . . . . . . . . . . . . . . . . . . . . 121
FDA Consumer Update . . . . . . . . . . . . . . . . . . . . . . 123
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal. For more detailed
safety information, see “Health and Safety
Information” on page xx.
Road safety comes first
Do not use a hand-held mobile phone while driving;
park the vehicle first.
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off on aircraft
Mobile phones can cause interference. Using them
on aircraft is both illegal and dangerous.
Switch off in hospital
Follow any regulations or rules. Switch phone off
near medical equipment.
Respect special regulations
Follow any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
Interference
All wireless phones may be subject to radio
interference, which may affect their performance.
Unpacking
Radio frequency exposure information
In August 1996, the Federal Communications
Commission (FCC) of the U.S. adopted an updated
safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC
regulated transmitters. The design of this phone
complies with the FCC guidelines and these
international standards.
Your package contains the following items.
To maintain compliance with FCC RF exposure
guidelines, if you wear a handset on your body, use
the SAMSUNG-supplied or approved carrying case,
holster, or other body-worn accessory.
If you do not use a body-worn accessory, ensure the
antenna is at least one inch (2.5 cm) from your body
when transmitting. Use of non-approved accessories
may violate FCC RF exposure guidelines.
Handset
Travel Charger
Battery
Hand Strap
User’s Manual
Use sensibly
Use only in the normal position (to ear). Do not touch
the antenna unnecessarily when the phone is
switched on.
Accessories and batteries
Use only SAMSUNG-approved accessories and
batteries.
Use qualified service
Only qualified service personnel must repair
equipment.
In addition, you can obtain the following accessories for
your phone from your local SAMSUNG dealer:
•
•
•
•
•
•
Desktop charger
Hands-free kit
Standard/Extended battery
Cigarette lighter adapter
Ear-microphone
Leather case
Your Phone
Your Phone
Key
Phone Layout
The following illustrations show the main elements
of your phone.
Description
Perform the functions indicated by the text
above them (in the bottom line of the
display).
(soft keys)
In the menu facility, scrolls through the
menu options and Phonebook memory when
slid and confirms selection when pressed.
Antenna
Service light
Earphone jack
Earpiece
When slid or pressed in idle mode, function
as shortcut keys to access favorite menus.
For details on changing the shortcut setting,
see page xx. Note that sliding this key right
is fixed to access the Voice Memo menu.
Display
Navigation key
Soft key (left)
Dial/menu
confirmation key
Cancel/
correction key
Microphone
Flip cover
Soft key (right)
Power on/off key
Alphanumeric
keys
Special function
keys
Deletes characters from the display.
In the menu facility, returns to the previous
menu level.
When held down for more than two seconds
in idle mode, quickly enters or exits silent
mode.
Makes or answers a call.
In idle mode, recalls the last number dialed.
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to the idle mode
and cancels your input.
When held down in idle mode, allows you to
access your voice mail box.
Your Phone
Key
Description (continued...)
Icons
Your Phone
Enter numbers, letters and some special
characters.
Icon
Enter special dial characters. Also use
these keys for various purposes in
different functions.
Shows the received signal strength. The
greater the number of bars, the better the
signal strength.
Appears when a call is in progress.
Appears when you are out of service area.
Display
Appears when you are out of your home
area and have registered onto a different
network (when travelling in other cities and
countries, for example).
Display Layout
The display comprises three areas.
Menu
Description
Names
Icons
Appears when a new text message has
been received.
Text and
graphic area
Appears when the phone is in digital mode.
Soft key
indications
Appears when the silent mode is active
and when the Alert Type menu option (3.3)
is set to Vibration.
Area
Description
First line
Displays various icons (see page xx).
Middle lines
Display messages, instructions and
any information that you enter
(number to be dialed, for example).
Last line
Shows the functions currently
assigned to the two soft keys.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Appears when a new voice mail message
has been received.
Appears when you set the mute mode. (???)
10
Appears when you set an alarm.
11
Your Phone
Backlight
The display is illuminated by a backlight. When you
press any key, the backlight illuminates. It turns off if
no key is pressed within a given period of time,
depending on the Back Light option set in the
Phone Settings menu.
To specify the length of time for which the backlight
is active, set the Back Light menu option (4.2.1);
see page xx for further details.
Getting Started
Installing the Battery
To Install the Battery
1. Place the battery on the back of the phone with
the top of the battery about a quarter of an inch
from the catch so that the battery engages with
the slots molded into the body.
Service Light
The service light is in the top left-hand corner of the
phone. It flashes to indicate phone status: It flashes
to indicate phone status: When the phone is ready
for use, it flashes in green. When a call or message
comes in, and you are recording a voice memo, it
flashes in red.
To activate or deactivate use of the service light, set
the Service Light menu option (4.3); see page xx for
further details.
2. Slide the battery toward the top of the phone until
it snaps into place.
Service light
12
13
Getting Started
Getting Started
Charging a Battery
To Remove the Battery
Your phone is powered by a rechargeable Li-Ion
battery. A travel charger is provided with your phone.
Use only approved batteries and chargers. Ask your
local SAMSUNG dealer for further details.
1. If necessary, switch off the phone by holding
down the
key until the power off graphic
begins to play.
2. Remove the battery. To do so:
➀ Push and hold down the catch above the
battery on the back of the phone and
➁ slide the battery down and lift it away.
The phone can be used while the battery is charging.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
➀
1. With the battery in position on the phone, connect
the lead from the travel charger to the jack on the
bottom of the phone.
➁
2. Connect the charger to a standard AC wall outlet.
14
13
15
Getting Started
Getting Started
3. When charging is finished (the lamp on the charge
turns green), disconnect the charger from the
power outlet and remove it from the phone by
squeezing the two tabs on the lead (➀) and unplug
the lead(➁).
1. Open the flip cover.
2. Hold down the
key for more than one
second to switch the phone on.
3. The phone searches for your network and when
it finds the network, the idle screen, illustrated
below, is displayed.
➀
➁
Switching the Phone On/Off
➀
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and
the following message will be repeated at regular
intervals on the display, along with the empty battery
icon:
**Warning**
Low Battery
Service Provider
12:57P
Sat 14 Mar
Menu
Names
Note: The display language is set to English by
factory default. To change the language, use
the Language menu option (4.7); for further
details, refer to page xx.
4. When you wish to switch the phone off, hold
down the
key for more than two seconds.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
16
17
Getting Started
General Functions
Locking Your Phone
You can lock your phone to protect the phone against
unauthorized use. When the phone is locked, you
cannot operate the phone until you enter the lock
code.
To lock your phone:
Press and hold down the key for more than two
seconds in idle mode. “Phone Locked” appears on
the idle screen.
Service Provider
12:57P
Phone Locked
Unlock
SOS
Making a Call
When the idle screen is displayed, key in the area
code and phone number and press the
key.
Note: If you have set the Auto Redial menu option (4.4)
to ON (see page xx) and the person called does
not answer or is already on the phone, the
number is redialed automatically up to ten times.
If the network answers the call (by voice mail
greeting, for example), the phone will not
attempt to redial.
Correcting the Number
To clear...
Then press...
The last digit
displayed
The C key.
The whole display
Hold down the C key for more
than one second.
To unlock the phone:
Press the Unlock soft key and enter the lock code,
then press the OK soft key. Your phone’s lock code is
preset at the factory to “0000”. For further details on
the lock code, see page xx.
Even when the phone is locked, you can place an
SOS call to one of the emergency numbers stored in
the SOS Call List (6.4). See page 80 for further
details.
Ending a Call
When you want to finish your call, briefly press and
release the
key or close the flip cover.
To place an SOS call, press the SOS soft key, select
the desired emergency number by sliding the
navigation key up or down and press the Yes soft
key.
18
19
General Functions
General Functions
Making a Call from the Phonebook
You can store the names and phone numbers dialed
regularly in the phone memory, called Phonebook.
You then simply select the required name to recall
the associated number. For further details on the
Phonebook feature, refer to page xx.
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the navigation key. Slide the key up to
increase and the key down to decrease the volume
level.
Redialing the Last Number
The phone stores the last 10 numbers dialed. To
recall any of these numbers, proceed as follows.
1. If you have typed any characters on the display,
press the
key to return to idle mode.
2. Press the
key to display the last dialed number.
3. Slide the navigation key up or down to scroll
through the numbers until the required number is
displayed.
4. To...
20
Answering a Call
When somebody calls you, the phone rings and the
phone animation plays in the middle of the screen.
Then...
Dial the number
displayed
Press the
key.
Edit the number
displayed
• Press the Edit soft key.
• Change the number as
required, referring to
“Correcting the Number”
for details (see page xx).
• Press the Save soft key to
save the number or the
key to dial the number.
nnnnn
((
))
Caller’s name or
number (if available)
Accept
If you are subscribed to the Caller Identification
service and the caller can be identified, the caller’s
phone number (or name if stored in your Phonebook)
is displayed. If the caller cannot be identified, only
the phone animation plays.
21
General Functions
1. Open the flip cover. If it is already open, press the
key.
If the Answer Mode menu option (4.5) is set to
Anykey Answer, you can press any key except
the
key.
With the menu set to Send Key Answer, you
must press the
key or the Accept soft key to
answer the incoming call (For details on the
Answer Mode menu, see page xx).
2. End the call by closing the flip cover or pressing
the
key.
General Functions
2. Press the View soft key.
The number corresponding to the most recent
missed call is displayed, if available.
3. To...
Then...
Scroll through the
missed calls
Slide the navigation
key up or down.
Call the number displayed
Press the
Edit or delete a missed
call number
Press the Options
soft key (see below).
Note: You can answer a call while using the
Phonebook or menu features. The current
operation will be interrupted.
Editing a Missed Call Number
Viewing Missed Calls
1. Press the Options soft key.
If you are unable to answer a call for any reason, you
can find out who was calling you, provided that the
Caller Line Identification service is available. In this
way, you can call the person back, if necessary. The
number of missed calls is displayed on the idle
screen immediately after the call was missed.
To view the missed call immediately, take the
following steps:
1. If the flip cover is closed, open the cover.
22
key.
Note: If the caller’s number associated with the
missed call is not available, the Edit option is
not displayed.
2. If necessary, slide the navigation key up or down
to highlight the Edit option.
3. Press the Select soft key.
4. Change the number as required.
5. To...
Call the number
Store the number
Then press the...
key.
Save soft key and enter
the name and location
required (for further
details, refer to page xx).
23
General Functions
Selecting Functions
and Options
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, slide the navigation key up or down
to highlight the Delete option.
3. Press the Select soft key.
You can press the
Missed Call feature.
key at any time to exit the
Note: You can access the Missed Call feature at
any time by selecting the Missed Calls menu
option (1.1); for further details, see page xx0.
Quick-switching to Silent Mode
Using the Soft keys
Your phone offers a set of functions that allow
you to customize your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys marked
and
. Each menu and
sub-menu allows you to view and alter the settings of
a particular function.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
Example:
You can quickly switch your phone to silent mode
with a touch of a key. Press and hold the C key until
the
icon and “Silent Mode” appears in display.
Your phone goes to silent mode immediately.
In silent mode, your phone switches the sound
settings as follows:
alert type (3.3)
message tone (3.5)
error tone (3.6)
keypad tone
vibration + light
vibration + light
off
off
To exit silent mode, press and hold the C key again
until “Exit Silent Mode” appears.
Enter Name
OK
Press the left soft
key to save the
name entered.
Press the right soft key
to select text input mode
(upper case, lower case,
and numeric characters).
This feature is convenient when you are in a hurry to
mute the phone sound, such as when in a theater.
24
25
Selecting Functions and Options
Selecting Functions and Options
Selecting Functions and Options
Example: Setting the Display Language
To view the various functions/options available and
select the one required, proceed as follows.
1. When the idle screen is displayed, press the
Menu soft key to enter the menu facility.
1. Press the appropriate soft key.
2. To...
Then...
Select the:
• Function displayed
or
• Option highlighted
press the Select soft
key or the navigation
key, or slide the key
right.
View the next function
or highlight the next
option in a list
slide the navigation
key down.
Move back to the
function or
option in a list
slide the navigation
key up.
Move back up one
level in the structure
slide the navigation
key left or press the
soft key or C key.
Exit the structure
without changing
the settings
2. Scroll through the menus until you reach the
Phone Settings menu, by sliding the navigation
key down.
Phone Settings
Select
key.
In some functions, you may be asked for a lock code
or security code. Enter the required code and press
the navigation key or the OK soft key.
Note: When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On/Off or
Enable/Disable, your phone highlights the
option that is not currently active, so that you
can select it directly.
26
Service Provider
10:30P
Fri 15 May
Menu
Names
3. To select the Phone Settings menu, press the
Select soft key or the navigation key.
Greeting Message
Select
4.1
27
Selecting Functions and Options
Phonebook
4. Scroll through the sub-menus until you reach the
Language sub-menu, by sliding the navigation
key down.
The Phonebook allows you to store frequently used
phone numbers and the associated names in your
phone to make it easy for you to make a call without
having to remember or enter the phone number. You
can store up to 250 (1 ~ 250) entries.
Language
Current
language
English
Select
Storing a Phone Number with a Name
4.7
5. To view the languages available, press the
Select soft key or the navigation key. The current
setting is highlighted.
As soon as you start to enter a number, Save appears
above the left soft key to allow you to store the
number in Phonebook.
1. Key in the number to be stored.
Note: If you make a mistake while entering a
number, correct it using the C key. For
further details, refer to page 20.
Current
language
English
2. When you are sure that it is correct, press the
Save soft key.
Français
Español
Select
4.7.1
6. Scroll through the list of languages until the
appropriate one is highlighted, by sliding the
navigation key up or down.
7. Press the Select soft key or the navigation key to
confirm your selection.
8. Press the C or soft key or slide the navigation
key left twice to exit the menu structure.
28
3. Select a label by sliding the navigation key up or
down, and press the Select soft key or the
navigation key.
The available labels are: Home, Office, Mobile,
Pager, Fax, E-mail and No label.
4. Enter the corresponding name. For information on
how to enter a name, see page xx.
5. When you are satisfied, press the OK soft key or
the navigation key.
The phone now prompts you to select a location in
the phone memory for you to save the entry.
29
Phonebook
Phonebook
6. If necessary, enter your preferred location by
pressing the number keys.
7. Press the OK soft key or the navigation key. The
entry is saved and the display shows the name
and number you just have saved.
8. Press the
key to return to the idle screen.
To make a call to the displayed number, press the
Call soft key.
List of characters available:
Upper Case
Upper case characters
is displayed.
Lower case characters
is displayed.
Numbers only
is displayed.
Entering a Name
1. To select...
Then press the
soft key until...
2. Press the key labeled with the required letter
referring to the table on next page.
• Once for the first letter
• Twice for the second letter
• And so on
The cursor moves to the next available space
when you press a different key.
3. Select the other letters in the same way.
Characters in the Order Displayed
Key
To access the Phonebook options, press the
Options soft key. See page xx.
30
Note: When entering the same letter twice or a
different letter on the same key, press the 1
key to enter a space or just wait for a few
seconds for the cursor to move automatically,
and then select the next letter.
Space
A B
D E
G H
J K
MN
P Q
S 7
T U
WX
Z 9
*/ + - = < > ( )
%&
ΦΘΨΠΣ Ξ
Lower Case
Space
†
“
s 7
z 9
. , : ; ! ? @‘
¿ § £ $ ¥ ¤ ß Ω
Speed Dialing by Memory Location
Once you have stored phone numbers in the phone
book memory, you can dial them easily whenever you
want.
To speed dial the desired number:
For the 1-digit memory location number (1 through 9),
press and hold down the appropriate digit.
31
Phonebook
Phonebook
For the 2 or more-digit memory location number (10
through 250), press first digit(s) briefly and hold
down the last digit.
Note: If you enter the location number and press the
key, your phone displays the details on the
entry, such as name, number, location number
and label. If you have stored more than one
number for a name, scroll through the entry by
pressing the key repeatedly.
Phonebook Options
Add Number
This option allows you to store up to seven numbers
per entry by assigning them to different categories.
Note that you cannot duplicate same categories for
one entry. For example, you can only have one
number labeled “Mobile” for the selected entry.
Change Name
This option allows you to change the name for the
number. Clear the old name pressing the C key and
enter a new name. For information on entering a
name, see page xx.
Change Number
When viewing a number in Phonebook, Options
appears above the left soft key to allow you to
access the Phonebook options.
This option allows you to change the number. Clear
the old number by pressing the C key and enter a
new number.
Accessing the Options
Change Type
To access the various Phonebook options, take the
following steps:
1. While viewing a Phonebook entry, press the
Options soft key. The first available option is
highlighted.
2. To...
32
Then...
Select the
highlighted option
Press the Select soft key
or the navigation key.
Highlight a
different option
Slide the navigation key up
or down until the required
option is highlighted.
This option allows you to change the label type of a
stored number. Note that you cannot duplicate same
categories for one entry. For example, you can only
have one number labeled “Mobile” for the selected
entry.
Caller Group
This option allows you to set the number as a
member of the caller group. Select the desired caller
group from the list. For more details on the Caller
Group feature, see page xx.
33
Phonebook
Erase Number
This option allows you to erase a stored number. If
you saved two numbers under a name, only the
currently selected number will be erased. You are
asked to confirm that you wish to erase the number
by pressing the OK soft key or the navigation key.
Erase Name
This option allows you to erase a name stored in the
Phonebook so that all numbers under the name are
erased. You are asked to confirm that you wish to
erase the name by pressing the OK soft key or the
navigation key.
Move
This option allows you to move a Phonebook entry to
another location. When prompted, enter the location
number which you are moving the number to, and
press the OK soft key or the navigation key.
Set Priority No.
This option allows you to set the selected number as
a speed dial number for the entry if it has more than
one number. Press the Set soft key or the navigation
key.
Phonebook
Searching for and Dialing a Number in
the Phonebook
1. When the idle screen is displayed, press the
Names soft key. You are asked to enter a name.
2. Enter the starting characters of the name that you
want to find and press the Search soft key.
Note: You can also scroll through all Phonebook
entries by pressing the Search soft key
directly.
The Phonebook entries are listed, starting with
the first entry matching your input.
3. To...
Then...
View the
highlighted entry
Press the View soft key or
the navigation key.
Select a
different entry
Slide the navigation key up
or down until the required
entry is highlighted.
Look for a name
starting with a
different letter
Press the key labeled with
the required letter.
4. Once you have found the required entry, press the
key to dial the number.
34
35
Phonebook
Phonebook
Name Options
Defining a caller group
While entering a name for searching, you can see
Options above the right soft key. This key allows you
to enter the various options.
Accessing the Options
To access the various Phonebook options, take the
following steps:
1. In idle mode, press the Names soft key.
2. Press the Options soft key. The first available
option is highlighted.
3. To...
Then...
Select the
highlighted option
Press the Select soft key
or the navigation key.
Highlight a
different option
Slide the navigation key up
or down until the required
option is highlighted.
New Entry
This option allows you to create a new entry in the
Phonebook. For details on storing a phone number,
see page 30.
Select the group to be defined and set the
appropriate options. The following options are
available.
Call ring tone: allows you to select the ring tone to
be used when you receive a voice phone call from a
person in the group.
SMS tone: allows you to select the ring tone to be
used when you receive a text message from a person
in the group.
Graphic: allows you to select the graphic icon to be
displayed when you receive a call from a person in
the group.
Group Name: allows you to assign a name to the
group; for further details on how to enter characters,
refer to page xx.
Assigning numbers to a group
1. View the required number in Phonebook.
2. Press the Options soft key.
3. Select the Caller Group option.
4. Select the required group.
Caller Group
You can set the phone to ring in a specific way and
display a preselected graphic icon when a particular
person calls you. To do so, you must:
• Define your caller groups
• Assign the numbers in the Phonebook to the
appropriate group
36
To remove a number from a group, select the No
Group option.
37
Phonebook
In-Call Options
Own Number
This function is a memory aid, which you can use to
check your own phone number if you need to do so.
Your phone provides a number of control functions
that you can use during a call.
Memory Status
Muting/Sending Key Tones
You can check the used memory and free memory
you have for Phonebook . The display shows how
many entries are currently stored and can be saved
in future in Phonebook.
You can turn the key tones which were generated
each time you press a key off or on.
To turn the key tone off, take the following steps:
Erase All
This option allows you to erase all of the Phonebook
entries.
When a confirmation appears, press the Yes soft key
to erase all Phonebook entries. To cancel erasing the
entries, press the Cancel soft key.
When prompted, enter the lock code. All entries in
the Phonebook are then erased.
1. During a call, press the Options soft key.
2. Slide the navigation key up or down to select the
Mute Keys option. Now, the option is replaced
with Send Keys.
3. Press the OK soft key or the navigation key.
Your phone does not transmit the key tones. It
allows you to press keys without hearing
annoying key tones during a call.
To turn the key tone on, take the following steps:
1. During a call, press the Options soft key.
2. Slide the navigation key up or down to select the
Send Keys option. Now, the option is replaced
with Mute Keys.
3. Press the OK soft key or the navigation key.
Note: To communicate with answering machines or
computerized telephony systems, the Send
Keys option must be selected.
38
39
In-Call Options
Searching for a Number in the
Phonebook
In-Call Options
Using the SMS Service
You can create and send a SMS message during a call.
You can search for a number in the Phonebook during
a call.
1. During a call, press the Options soft key.
1. During a call, press the Options soft key.
2. Slide the navigation key up or down to select the
SMS Service option.
2. Slide the navigation key up or down to select the
Phonebook option.
3. Press the OK soft key or the navigation key.
3. Press the OK soft key or the navigation key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the start of the name, the Phonebook
entries are listed, starting with the first entry
matching your input. The entry is also highlighted.
5. To view the highlighted entry, press the View soft
key or the navigation key.
For a more detailed description of the Phonebook
feature, refer to page xx.
4. Write text for the message, and press the OK soft
key or the navigation key.
5. Enter the desired phone number, and press the OK
soft key or the navigation key to send the message.
For further details on the SMS service, refer to page xx.
Making a Calling Card Call
When you make a call using the prepaid calling card, if
you save the calling card information in the Calling
Card menu option (4.9), you can send automatically the
code number required for the service without entering
them manually each time you are prompted.
For further details on making a calling card call, refer
page xx.
40
41
In-Call Options
Making the Voice Call Private
You can make the current call private so that nobody
eavesdrops your call.
1. During a call, press the Options soft key.
2. Slide the navigation key up or down to select the
Voice Privacy option.
3. Press the OK soft key or the navigation key.
4. Slide the navigation key up or down to select
Activate or Deactivate.
Select Activate to secure your call or Deactivate
not to do.
In-Call Options
2. Press the
key to dial the second call. The first
call is automatically put on hold.
3. To swap between the two calls, simply press the
key.
4. To end the current call, press the
key.
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (7.2) to Activate (see page xx). You will be
notified of an incoming call by a call waiting tone.
5. Press the OK soft key or the navigation key.
To answer a call while you have a call in progress,
take the following steps:
Putting a Call on Hold
1. When you hear a call waiting tone, press the
key to answer the incoming call.
The first call is automatically put on hold.
You can make another call while you have a call in
progress if this service is supported by the network.
Of two calls, one is active and the other is on hold
and you can swap between the calls.
2. To switch between the two calls, press the
key.
3. To end the current call, press the
key.
Note: The procedure to put a call on hold may vary
depending on your network. For further details,
contact your service provider.
To make a call while you have a call in progress, take
the following steps:
1. During a call, key in the phone number that you
wish to dial or look it up in Phonebook.
42
43
In-Call Options
Using the Menus
Making a Conference Call
You can conduct conference calls with two separate
parties at the same time. A conference call is a
network service. For more information, contact your
service provider.
Note: The procedure may vary depending on your
network. Contact the service provider for
details.
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. When the second person answer, press the
key to merge the calls.
4. End the conference call by closing the flip cover
key.
or pressing the
During a conference call, if one of the callers hangs
up, you and the remaining caller will stay connected.
If you initiated the call and you hang up first, all
three parties are disconnected.
The phone offers a range of functions that allows
you to customize the phone to your needs. These
functions are arranged in menus and submenus.
The menus and submenus can be accessed by
scrolling or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In idle mode, press the Menu soft key to access
the menu facility. Slide the navigation key up or
down to reach the desired main menu, e.g.,
Phone Settings. Press the Select soft key or the
navigation key to enter the menu.
2. If the menu contains any submenus, for example,
Language, find the one you want by sliding the
navigation key up or down. Press the Select soft
key or the navigation key to enter the submenu.
If the menu you selected has submenus, repeat
this step.
3. Slide the navigation key up or down to find the
setting of your choice. Press the OK soft key or
the navigation key to confirm the chosen setting.
Notes:
• You can return the previous menu level by pressing
the C key.
• You can exit the menu without changing the menu
settings by pressing the
key.
44
45
Using the Menus
Using the Menus
Accessing a Menu Function by Using its
Shortcut
The menu items (menu, submenus and setting
options) are numbered and can be accessed quickly by
using their shortcut number. The shortcut number is
shown in the bottom right next to the soft key on
the display.
List of Menu Functions
The following illustration shows the menu structure
available and indicates the:
• Number assigned to each option
• Page on which you can find a description of each
feature
1. Call Records
Backlight
Short
Select
1.1
1.2
1.3
1.4
4.2.1
Shortcut number
Page xx
Missed Calls
Incoming Calls
Outgoing Calls
Call Time
1.4.1 Last Call Time
1.4.2 Total Call Time
1.4.3 Display Call Time
1.4.4 Reset Timers
1. In idle mode, press the Menu soft key.
2. Within three seconds, key in the first digit of the
shortcut number. Repeat this for each digit of the
shortcut number.
Example: Setting the Backlight option to Short
Press the Menu soft key, and key in 4, 2, 1, 2.
Menu for entering the menu, 4 for Phone
Settings, 2 for LCD Control, 1 for Backlight, 2
for Short .
Note: The numbers assigned to each menu function
are indicated on the list on page xx.
46
2. Messages
Page xx
2.1 Voice Mail
2.1.1 Connect to
Voice Server
2.1.2 Voice Server
Number
2.2 Read Messages
2.2.1 New Inbox
2.2.2 Old Inbox
2.2.3 Outbox
2.3 Write Messages
2.4 Preset Message List
2.5 Setup
47
P
U shionnge Btohoek M e n u s
3. Sound Settings
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
Page xx
Ring Volume
Ring Tone
Alert Type
Tone Length
Message Tone
Error Tone
Minute Minder
Connect Tone
Melody Composer
4. Phone Settings
4.1 Greeting Message
4.2 LCD Control
4.2.1 Back Light
4.2.2 Contrast
4.3 Service Light
4.4 Auto Redial
4.5 Answer Mode
4.6 Slide Menu
4.7 Language
4.8 Reset Settings
4.9 Calling Card
4.10 User Changeable Key
4.10.1 Key up
4.10.2 Key down
4.10.3 Key left
4.10.4 Key OK
48
Using the Menus
Page xx
5. Organizer
Page xx
5.1 Calendar
5.2 To Do List
5.3 Time & Date
5.3.1 Set Time
5.3.2 Set Date
5.3.3 World Time
5.3.4 Format
5.4 Alarm
5.4.1 Once Alarm
5.4.2 Daily Alarm
5.4.3 Weekly Alarm
5.4.4 Remove Alarm
5.5 Calculator
6. Security
Page xx
6.1 Change Lock Code
6.2 Change Security Code
6.3 Call Restriction
6.3.1 restrict all
outgoing call
6.3.2 restrict all
incoming call
6.3.3 restrict outgoing call
6.4 SOS Call List
49
Using the Menus
Call Records
7. Network Services
*7.1
*7.2
7.3
7.4
7.5
7.6
Page xx
Call Diverting
7.1.1 Divert Always
7.1.2 Busy
7.1.3 No Reply
7.1.4 Unreachable
7.1.5 Cancel All
Call Waiting
Network Selection
7.3.1 Automatic
7.3.2 Manual
7.3.3 New Search
Voice Privacy
NAM Selection
Set Service Code
7.6.1 Call Diverting
7.6.2 Call Waiting
Via this menu, you can view the following phone
calls:
• Missed
• Incoming
• Outgoing
The number and name (if available) are displayed,
together with the date and time at which the call was
made.
Note: Your phone can keep up to ten numbers in
each record.
Missed Calls
*available when you set the service code in the Set Service Code
menu option (7.6).
8. Games
Page xx
8.1
8.2
8.3
8.4
8.5
8.6
8.7
50
Casino
Roulette
Black Jack
Sniper
Snake
Mole
Othello
Menu 1.1
This option lets you view the last unanswered calls.
Pressing the Options soft key allows you to:
• Edit the number (if available) and dial it or save it
in Phonebook
• Delete the call from the list
Incoming Calls
Menu 1.2
This option lets you view the last calls received.
Pressing the Options soft key allows you to:
• Edit the number (if available) and dial it or save it
in Phonebook
• Delete the call from the list
51
Call Records
Messages
Outgoing Calls
Menu 1.3
This option lets you view the last numbers dialed.
Pressing the Options soft key allows you to:
• Delete the number
• Edit the number and save it in Phonebook
Call Time
Menu 1.4
This option lets you view the timers for calls made
and received. The following timers are available.
The SMS (Short Message Service) function is a
network service and may not be supported by your
network. Messages can be sent by text, fax and email messaging systems, provided that these services
are supported by your network.
When you receive new text messages, the
icon
appears on the top line of the display. If the message
memory is full, an error message is displayed and you
cannot receive any new messages. Use the Delete
option in the Read Messages menu (2.2) to delete
obsolete messages.
Last Call Time: duration of the last call.
Voice Mail
Total Call Time: total duration of all calls made
from or receive to your phone since the timer was
last reset using the Reset Timer option.
This menu provides you with a way of accessing your
voice mailbox (if provided by your network).
Display Call Time: allows you to set the phone to
display the call time when the call is made or
received. Select Enable to display the call time and
Disable not to display it.
Note: Please contact your service provider for more
information. Depending on the service
provider, you may be charged for accessing
the voice server.
Reset Timers: option used to reset the call timers;
you must first enter the phone’s security code (see
page xx) and then press the OK soft key or the
navigation key.
Connect to Voice Server: Before using this
feature, you must enter the voice server number
obtained from your service provider (see menu
option 2.1.2). You can then select this option to listen
to your voice mails.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so forth.
52
Menu 2.1
Note: You can connect to the voice mail server of
the service provider quickly by pressing and
holding down the 0 key in idle mode.
53
Messages
Messages
Voice Server Number: allows you to change the
voice mail server number.
2. Side the navigation key up or down to select the
message you want to read.
To...
Then press the...
Enter the server number
Corresponding numeric
keys.
Correct a digit
C key.
3. To view this message, press the View soft key.
The screen shows the:
• Sender’s phone number (if the message was
sent) or recipient’s phone number
• Message text
Save the entered number
Save soft key or the
navigation key.
Read Messages
Menu 2.2
To scroll through the message, slide the navigation
key up or down.
You can choose the following options, by pressing
the Options soft key.
Delete: allows you to delete obsolete messages.
Three message boxes are available:
New Inbox: used to store the messages that you
have received but not read.
Old Inbox: used to store the messages that you have
received and read.
Outbox: used to store the messages that you have
already sent or will send.
1. Select the required box. The first message in the
box is displayed with the following information:
• Message number
• Message status: New, Old, Not Sent, Sent
(If you have set the Delivery Ack menu option
to ON, the report is also shown; see page xx for
further details.)
• Date and time at which the message was
received (inbox only)
54
Text Reply: allows you to reply by sending a text
message.
Call Back: allows you to call the sender back.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in Phonebook.
Send: allows you to send a message that you have
received or saved. You can:
• Send the message
• Save and send the message
• Save but not send the message
Edit And Send: allows you to edit a message for
sending.
Note: The available options may vary, depending on
the message status (New/Old, Not Sent or
Sent for example).
55
Messages
Write Messages
Messages
Menu 2.3
Via this menu, you can write text messages of up to
160 alphanumeric characters (157 characters for email message). For further information on how to
enter the characters in your message, see page xx.
1. Slide the navigation key up or down to select a
setting group on which you have set up default
information on the SMS feature via the Setup
menu (see the page xx), and press the key or the
Select soft key.
2. After completing the message, press the OK soft
key or the navigation key.
Note: While writing a message, pressing the
key inserts a carriage return.
3. Select the desired one of the following options by
sliding the navigation key up or down, and press
the key or the Select soft key.
• Send Only: After transmission, the message
will be cleared.
• Save and Send: allows you to save a copy of
the message. When you read the message in
your outbox, Sent is displayed to indicate the
message status.
4. Enter the destination (phone number or e-mail
address) and press the navigation key or the OK
soft key to send the message.
Preset Message List
Menu 2.4
Using this menu, you can preset up to five messages
that you send most frequently to retrieve when
writing a new message. Scroll through the list by
sliding the navigation key up or down. When the
required message number appears, press the
Options soft key or the navigation key.
The following options are available:
Edit: allows you to write a new message or edit the
selected preset message.
Note: For further information on how to enter the
characters in your message, refer to page xx.
Send Message: allows you to retrieve the selected
message for sending. Once you have completed the
message, you can send, save and send, or simply save
it.
Delete: allows you to delete the selected message.
• Save Only: allows you to save the message so
that it can be sent later. You do not take the
next step. When you read the message in your
outbox, Not sent is displayed.
56
57
Messages
Setup
Messages
Menu 2.5
Via this menu, you can set up default information for
the SMS feature. A setting group is a collection of
settings required to send messages. Five setting
groups are available.
Select the desired number by sliding the navigation
key up or down, and press the key or the Select soft
key. Then, set up the options for the group.
The available setup options are:
Privacy: allows you to set the restriction feature.
When this option is set to Restricted, the recipient
must have the password which you have set when
writing a message to see the message. If you do not
want to use the feature, select Not Restricted.
Urgency: allows you to set the urgency status of the
messages. Bulk, Normal, Urgent, and Very Urgent
are available.
Type: allows you to set the type of messages. The
available types are; Text and E-mail.
Setting Name: allows you to give a name to the
setting group currently being defined.
Callback Number: allows you to set the phone
number to which the recipient of your SMS message
may send you a reply message via your message
center, if the service is provided by the network.
Manual Ack: allows you to activate or deactivate
the manual acknowledgement function. When this
function is activated, the recipient can send you an
answer to your message by one touch of a number
key.
Delivery Ack: allows you to activate or deactivate
the delivery acknowledgement function. When this
function is activated, the network informs you
whether your message has been read or not by the
recipient.
58
59
Sound Settings
Sound Settings
Alert Type
You can use the Sound Settings feature to customize
various settings, such as the:
• Ringing tone or melody, volume and type
• Sounds made when you press a key, make an
error or receive a message
Ring Volume
Menu 3.1
This option allows you to adjust the volume level of
the ringer.
Slide the navigation key up or down to increase or
decrease the level. The greater the number of bars
you see, the greater the volume is.
Ring Tone
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.
Light Only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ringer tone
selected via the Ring Tone menu option (3.2).
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three times
and then starts ringing.
Step Melody: the phone rings using the selected
ringer tone, but the volume becomes louder and
louder from the minimum level. Reaching to the
maximum, the phone restarts from the minimum.
Menu 3.2
This option allows you to select the desired ringer
tone. You can choose from 20 different tones. Each
time you select a tone, it sounds for a few seconds.
Tones 19 and 20 correspond to the melodies that you
can compose, using the Melody Composer menu
option (3.9).
60
Menu 3.3
Tone Length
Menu 3.4
The tone length setting enables you to select Short or
Long DTMF (dual-tone multi-frequency) tones. DTMF
tones are what your phone transmits to access
teleservices (such as a bank account). The system used
by the bank or other service determines if you need
short or long DTMF. If the service is digital (which most
are these days), short DTMF will almost always work.
However, some new systems and almost all older
(analog) system require you to use long DTMF tones.
61
Sound Settings
Message Tone
Sound Settings
Menu 3.5
This option allows you to select how the phone
informs you that a new message has been received.
The following options are available:
Light Only: the service light in the top right-hand
corner of the phone flashes.
Menu 3.7
This option allows you to specify whether the phone
must beep every minute during an outgoing call to
keep you informed of the length of your call.
The following options are available:
OFF: the phone does not beep.
ON: the phone beeps every minute.
Single Beep: the phone beeps once.
SMS Tone1~10: the phone uses an SMS tone. You
are provided with ten SMS tones.
Error Tone
Minute Minder
Menu 3.6
This option allows you to select how the phone
informs you that you have made a mistake.
The following options are available:
Connect Tone
Menu 3.8
You can set your phone to beep when your call is
connected to the remote phone (or the remote phone
is ringing depending on your network).
The following options are available:
OFF: the phone does not beep.
ON: the phone beeps when your call is connected.
OFF: the phone does not beep.
ON: the phone beeps to indicate an invalid entry.
62
63
Sound Settings
Sound Settings
Melody Composer
Menu 3.9
This option allows you to compose your own melody
to be used as the ring tone.
Three octaves are available. A maximum of 100
notes can be entered. You can adjust the length of
the notes and add rests, as required.
To...
Then press the...
Listen to your
melody
Listen soft key.
Modify your
melody
Modify soft key.
Composing a Melody
Saving a Melody
You can compose two melodies. When you access
the menu, the names of any melodies created are
displayed. Otherwise, Melody 1 and Melody 2 appear.
Select the melody that you wish to create or edit.
When you are satisfied with your melody after
listening to it, you can save the melody and indicate
that you wish to use it as the ring tone.
To...
Then press the...
2. Enter a title for the melody.
Compose a
melody
Edit soft key.
Note: For further details on how to enter
characters, refer to page xx.
Insert a note
Next soft key.
Move a note a
semitone up
2 key.
You are asked if the melody is to be set as the
ring tone.
Move a note a
semitone down
8 key.
Change the
length of a note
4 key one or more times until
the note is of the required length.
Delete a note
C key.
Enter a rest
6 key and hold it down for the
required length of time.
64
1. Press the Save soft key.
3. To use the melody as the ring tone, press the Yes
soft key or the navigation key. The melody is
saved and set to the current ring tone.
Otherwise, press the No soft key. The melody is
saved only.
Note: You can also select the melodies composed
via the Ring Tone menu option (3.2); they are
tones 19 and 20 respectively.
65
Phone Settings
Phone Settings
The following options are available:
Many different features of your phone can be
customized to suit your preferences via the Phone
Settings menu.
Greeting Message
Menu 4.1
This option allows you to set a greeting to be
displayed briefly when the phone is switched on. The
current message is displayed.
To...
Then press the...
Clear the existing
message
C key and hold it down until
the message is cleared.
Enter a new
message
Appropriate alphanumeric
keys.
For further details on how to
enter characters, refer to page
xx.
Save the message
OK soft key or the navigation
key.
OFF: the backlight is not used.
Short: the backlight comes on when you press a key
or receive a call and switches off 10 seconds after
the last key is pressed.
Long: the backlight comes on when you press a key
or receive a call and switches off 20 seconds after
the last key is pressed.
Contrast
This option allows you to adjust the contrast of the
LCD screen by sliding the navigation key up or down.
Each time you slide the key, you can see the LCD
screen changing according to the current value.
Service Light
Menu 4.3
This option allows you to select whether or not the
service light in the top left-hand corner of the phone
is used.
The following options are available:
LCD Control
Menu 4.4
Back Light
OFF: the service light is not used.
ON: the service light flashes when the phone is ready
for use.
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
66
67
Phone Settings
Auto Redial
Phone Settings
Menu 4.4
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies
depending on the network.
The following options are available:
Menu 4.6
With the Slide Menu feature, you can determine
how the menus are displayed.
Note: This menu may be unavailable depending on
your network.
The following options are available:
Disable: the menus were not slid.
OFF: the number is not redialed.
Enable: the menus seem to slide into position from
the top, bottom, left or right, as applicable.
ON: the number is redialed automatically.
Answer Mode
Slide Menu
Menu 4.5
This option allows you to select how incoming calls
are to be answered.
Language
Menu 4.7
You can select a display language. The available
language options are: English, Español, and
Português.
The following options are available:
Open Answer: to answer a call, you can simply open
the flip cover. When the cover is already open,
pressing the
key to answers the call.
Reset Settings
Menu 4.8
Any Key Answer: to answer a call, you can press
any key except the
key. Pressing the
key
mutes the ringer.
You can easily reset the menu settings to its factory
default status.
Send Key Answer: to answer a call, you must press
the
key. Pressing the
key mutes the ringer.
Enter the 4-digit security code and press the OK soft
key or the navigation key. The phone resets all
settings to default.
Note: The security code is preset to “0000”. To
change this code, refer to page xx.
68
69
Phone Settings
Calling Card
Phone Settings
Menu 4.9
When you use a calling card for long distance calls,
you must send the service code and the card number
to the calling card service system. Using this menu,
you can save these calling card information to send
them automatically when you make calling card calls.
You can store up to five calling cards.
Enter 4-digit security code and press the OK soft key
or the navigation key to access the Calling Card menu.
Note: The order of the numbers which you must
enter may vary depending on the dialing
sequence your card uses.
6. When entering the number is finished, press the
OK soft key or the navigation key.
7. To return to idle mode, press the
key.
Selecting a Calling Card
Saving Calling Card Information
You can set the default card to use for making a
calling card calls. The number stored in the selected
card will be sent when you make calling card calls.
1. Scroll to a calling card number by sliding the
navigation key up or down, and press the key or the
Select soft key.
1. Scroll to the desired calling card by sliding the
navigation key up or down, and press the key or
the Select soft key.
2. If you want to set the card name, press the Select
soft key. Enter the name as needed. For further
details on entering a name, see page xx.
2. Select Set Default by sliding the navigation key
up or down and, press the key or the Select soft
key.
3. When entering name is finished, press the OK soft
key or the navigation key. The name is saved.
3. The display shows the number saved for the calling
card. If you are satisfied, press the navigation key
or the Set soft key.
4. Slide the navigation key down to display the Card
Number menu, and press the key or the Select
soft key.
4. To return to idle mode, press the
key.
5. Enter the card number (and/or PIN if required) as
listed on the back of the calling card.
To enter a pause, “P” before the second number,
press and hold the key. the number after “P” will
be sent only by pressing the
key when you
make a call with the calling card.
70
71
Call Records
Making Calls Using the Calling Card
Note: The procedure may not apply to all calling
cards. Please look at the back of your calling
card or contact your phone company for
instructions.
1. Make a call to the calling card service system.
2. When you are connected, press the Options soft
key and select Callcard Service by sliding the
navigation key up or down.
3. Press the navigation key or the OK soft key.
4. When you hear the prompting tone from the
service system, press the
key to transmit the
card numbers.
5. Dial the number of the desired remote phone.
Call Records
User Changeable Key
Menu 4.10
The navigation key can also be used as shortcut
keys. When slid or pressed in idle mode, it allows
you to access specific menu options directly.
Using this menu, the following menu options can be
assigned to the shortcut keys:
• Calendar (Menu 5-1)
• Calculator (Menu 5-5)
• Messages (Menu 2)
• Sound Settings (Menu 3)
• Games (Menu 8)
• Organizer (Menu 5)
• Phonebook (with the entries listed by name)
• Volume Up (key volume up)
• Volume Down (key volume down)
1. Select the key to be used as a shortcut key by
sliding the navigation key, and press the key or
the Select key:
• Key up (the key slid up)
• Key down (the key slid down)
• Key left (the key slid left)
• Key OK (the key pressed)
Note: Sliding the navigation key is fixed to enter the
Voice Memo menu.
2. Select the menu option to be assigned to the key
by sliding the navigation key, and press the key or
the Select soft key.
Note: To deactivate a shortcut key, select the None
option.
72
73
Organizer
Organizer
Writing a Memo
The Organizer feature enables you to:
• View the calendar and organize your schedule
• Define a list of things to do
• Set the current date and time
• Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for example)
• Use the phone as a calculator
Calendar
Menu 5.1
With the Calendar feature, you can:
• Consult the calendar
• Write memos to keep track of your schedule and
trigger an alarm if necessary
Consulting the Calendar
When you select the Calendar menu option (5.1), the
calendar is displayed. The following options are
available when you press the Options soft key:
Search all: displays all memos set, regardless of the
day and starting with the oldest. To scroll through the
memos, slide the navigation key up or down.
Delete all: allows you to delete all memos. You are
asked to confirm your selection.
Go to date: allows you to jump to a specific date.
To write or edit a memo on a specific date, take the
following steps:
1. Select the required date in the calendar, by sliding
the navigation key.
Note: Press the key to skip to the previous
month or the key to skip to the next
month.
2. Press the navigation key or the Select soft key.
An empty memo screen is displayed to allow you
to enter your memo.
3. Enter your memo and then press the navigation
key or the OK soft key.
Note: For further details on how to enter
characters, refer to page xx.
You are asked if you wish to set the alarm.
4. If you want the alarm to ring on the chosen day,
press the Yes soft key or the navigation key.
Otherwise, press the No soft key.
5. If you pressed Yes, set the time for the alarm and
press the OK soft key or the navigation key.
A check mark is displayed in front of the date in
the calendar to indicate that a memo exists.
Editing a Memo
If you select a day for which a memo already exists,
you can press the Edit soft key to edit the memo
displayed.
Note: For further details on how to enter characters,
refer to page xx.
74
75
Organizer
Organizer
Once you have finished editing the memo, press the OK
soft key. The following options are available when you
press the Options soft key:
Alarm: allows you to set the alarm to ring on the
chosen day.
Copy to: allows you to copy the memo to another date.
Move to: allows you to change the date and time of
the memo.
Menu 5.2
This feature allows you to:
• Draw up a list of tasks to be done
• Assign a priority and deadline to each task
• Sort the tasks by priority and status mark ( for
tasks to be done, ✓ for completed tasks)
Creating the To Do List
To create the To Do List, take the following steps:
1. Press the New soft key or the navigation key.
2. Enter the first task.
Note: For further details on how to enter
characters, see page xx.
3. Press the OK soft key or the navigation key.
4. Select High or Low priority by sliding the navigation
key up or down, and press the key or the Select soft
key.
76
6. Press the OK soft key or the navigation key to
save the task.
Editing the To Do List
Erase: allows you to delete the memo.
To Do List
5. Enter your deadline. If you do not want to define
the deadline, press the Skip soft key.
If tasks are already defined in the To Do List when you
select the To Do List menu option (5.2), the current
contents are displayed with the associated priority and
status mark. The following options are available:
To...
Then...
View the details
for a specific task
• Highlight the task.
• Press the View soft key.
Change the status • Highlight the task.
of a specific task • Press the key to mark the
( or ✓)
task as completed as of the
current date and time.
or
• Highlight the task.
• Press the Options soft key.
• Select the Mark option.
• Select the appropriate status.
Create a new task • Press the Options soft key.
• Select the New option.
• Enter the text, priority and
deadline for the task.
Edit an existing
task
•
•
•
•
Highlight the task.
Press the Options soft key.
Select the Edit option.
Change the text, priority and
deadline for the task.
77
Organizer
Organizer
To...
Then...
Sort the existing
tasks by priority
or status
• Press the Options soft key.
• Select the Sort option.
• Select the sort criterion (High,
Low, Done, Undo).
Copy a task
•
•
•
•
Highlight the task.
Press the Options soft key.
Select the Copy option.
Change the text, priority and
deadline for the task as
required.
Delete a task
• Highlight the task.
• Press the Options soft key.
• Select the Delete option.
Delete all tasks
• Press the Options soft key.
• Select the Delete all option.
• Confirm the deletion by
pressing OK or the navigation
key.
Time & Date
Menu 5.3
This option allows you to change the current time and
date displayed. You can also check the current time for
Greenwich Mean Time (GMT) and 21 major cities
around the world.
Set Time: allows you to enter the current time. You
can choose the time format via the Format menu
option (5.3.4).
78
Note: Before setting the time, you must specify your
time zone, via the World Time menu option
(5.3.3).
Set Date: allows you to enter the day, month and
year. You can change the date format via the Format
menu option (5.3.4).
World Time: allows you to check the current time
for Greenwich Mean Time (GMT) and 21 major cities
around the world, by sliding the navigation key up or
down.
The screen shows the:
• City name
• Current date and time
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default)
To select the time zone in which you are located,
take the following steps:
1. Select the city corresponding to your time zone by
sliding the navigation key up or down one or more
times.
The local date and time are displayed.
2. Press the navigation key or the Set soft key.
Format: allows you to change the time and date
formats.
Time format: 24 Hours
12 Hours
Date format: YYYY/MM/DD (year/month/day)
DD/MM/YYYY (day/month/year)
MM/DD/YYYY (month/day/year)
79
Organizer
Alarm
Organizer
Menu 5.4
You can set the alarm to ring at a specific time.
Calculator
Menu 5.5
Note: To meet FAA safety guidelines, the alarm does
not function when the phone is off.
Using this feature, you can use the phone as a
calculator. The calculator provides the basic arithmetic
functions; addition, subtraction, multiplication and
division.
The following options are available.
Using the Calculator
Once Alarm: the alarm rings only once and is then
deactivated.
1. Enter the first number using the numeric keys.
Daily Alarm: the alarm rings every day at the same
time.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
To set the alarm, take the following steps:
1. Choose the alarm frequency option.
2. Enter the required time and day of the week (if
applicable).
2. Press the right soft key until the required
arithmetic symbol appears: + (add), - (subtract),
* (multiply), / (divide).
3. Enter the second number.
4. Repeat steps 2 to 3 as many times as required.
Notes:
• To erase any mistakes and clear the display,
press the C key.
• To include a decimal point or a bracket, press the
left soft key until the required symbol is displayed.
Once you have set the alarm, you can see the alarm
icon next to the current time in the idle screen.
5. To calculate the result, press the navigation or
key.
To stop the alarm when it rings, open the flip cover
and press the Exit soft key.
6. To end the calculation, press the
key.
Remove Alarm: deactivates the alarm.
80
81
Security
Security
Call Restriction
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
Menu 6.3
The call restriction feature allows you to restrict your
calls.
Call restriction can be set up in the following ways:
restrict all outgoing call: calls cannot be made.
Change Lock Code
Menu 6.1
The lock code is a password for locking or unlocking
the phone. The lock code is factory set to “0000”.
This menu allows you to change your current lock
code to a new one.
Before you can specify a new lock code, you must
enter the current code. Then, enter a new code and
enter it again to confirm.
Change Security Code
Menu 6.2
The security code is used for restriction of the use of
your phone. The security code is factory set to
“0000”. This menu allows you to change your current
security code to a new one.
Before you can specify a new security code, you
must enter the current code. Then, enter a new code
and enter it again to confirm.
restrict all Incoming call: calls cannot be received.
restrict outgoing call: calls to the phone numbers
which you have specified cannot be made. You can set
up to 10 phone numbers.
To restrict the all outgoing or all incoming calls, take
the following steps:
1. Select restrict all outgoing call or restrict all
incoming call by sliding the navigation key up or
down, and then press the key or the Select soft
key.
2. Select Enable to the feature on, and press the
Select soft key.
If you want to set the restriction off, select
Disable.
3. Enter your security code and press the navigation
key or the OK soft key.
To set the phone numbers to be restricted, take the
following steps:
1. Select restrict outgoing call by sliding the
navigation key up or down, and then press the key
or the Select soft key.
82
83
Security
Network Services
2. Enter your security code and press the navigation
key or the OK soft key.
3. Select an empty location by sliding the navigation
key up or down and press the Options soft key.
4. Select Edit, then the navigation key or the OK soft
key. If a number has already been saved, this
option allows you to edit the number.
If you want to erase a saved number, select
Erase. When a confirmation displays, press the
Yes soft key or the navigation key.
5. Enter the phone number and press the navigation
key or the OK soft key. The phone number is saved
and now you cannot make a call to the number.
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
Call Diverting
Menu 7.1
Note: For using the Call Diverting service, you must
set the service code for it. Depending on the
Set Service Code setting, this menu may not
appear. For details, see page xx.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
SOS Call List
Menu 6.4
Your phone provides emergency numbers for SOS
calls programmed by the service provider. Three
numbers can be manually dialed at any time even
when the phone is locked or all outgoing calls are
restricted.
To make an SOS call when the phone is locked, press
the SOS soft key, select the desired number saved in
the SOS call list, and then press the Call soft key.
Call diverting can be set up in the following ways:
Divert Always: all calls are diverted.
Busy: calls are diverted if you are already making
another call.
No Reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Cancel All: all call diverting options are canceled.
84
85
Network Services
Network Services
1. Select the type of the call diverting options by
sliding the navigation key up or down, and press
the key or the Select soft key.
2. When Activate is highlighted, press the navigation
key or the Select soft key.
3. Enter the number to which the calls are to be
diverted, and press the navigation key or the OK
soft key.
Cancel: deactivates the Call Waiting feature.
Network Selection
Menu 7.3
The Network Selection feature enables you to
indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually.
Note: Pressing the Names soft key when displayed
allows you to search for a number in
Phonebook.
Note: You can select a network other than your
home network only if it has a valid roaming
agreement with your home network.
The phone sends your setting to the network and the
network’s acknowledgement is displayed.
The following options are available:
You can deactivate each call diverting setting by
selecting the Cancel option.
Call Waiting
Menu 7.2
This network service enables you to be informed when
someone is trying to reach you during another call.
Note: For using the Call Waiting service, you must set
the service code for it. Depending on the Set
Service Code setting, this menu may not appear.
For details, see page xx.
The following options are available:
Automatic: your phone automatically searches for a
network available to you and chooses the
appropriate one. Every time you switch your phone
on, this menu resets to Automatic.
Manual: your phone searches for available
networks, then displays them. Slide the navigation
key until the preferred network is highlighted and
then press the key or the OK soft key.
New Search: your phone begins a new search for
new Private and Residential systems. When finding
the best new system, the phone displays it. Then you
can confirm by pressing the navigation key or the
Select soft key, or start another search by pressing
the Next soft key.
Activate: activates the Call Waiting feature. You can
answer an incoming call while you have a call in
progress. See page xx for answering a waiting call.
86
87
Network Services
Voice Privacy
Network Services
Menu 7.4
Used only in digital networks, Voice Privacy encrypts
the voice channel so that people cannot eavesdrop on
your call conversation. If you turn this feature on and
voice privacy becomes inactive for any reason your
phone displays “Voice privacy not active” and beeps.
The following options are available:
Activate: turns this feature on. Your calls will be
secured.
Notes:
• It may not be necessary to have four NAMs for
your phone if your service provider has service or
roaming agreements for each area in which you
wish to use your phone. Contact your service
provider for details.
• You need at least one active number to make a
call. You cannot change from one NAM to another
during a call.
Set Service Code
Menu 7.6
Deactivate: turns this feature off.
Note: This feature may not be available in all areas.
Contact your service provider for details and
availability.
NAM Selection
Menu 7.5
The service provider programs your phone with the
phone number and system information when your
phone is first activated. This is called a Number
Assignment Module (NAM).
For example, your phone can be activated in up to 4
different service areas each giving your phone a
different phone number or account.
Only one number can be active at a time. When you
select a phone number, you are also selecting which
system to be used as your home system. The first
phone number displayed with this menu is the
currently selected number.
88
For using the network services, such as the Call
Diverting and Call Waiting, you must set the service
codes supplied by your service provider with this
menu. For more information on the service code,
contact your service provider.
Call Diverting: allows you to set the codes for using
each of the options (Divert Always, Busy, No
Reply, Unreachable and Cancel All) in the Call
Diverting.
Call Waiting: allows you to set the codes for using
each of the options (Activate and Cancel ) in the
Call Waiting.
After selecting the desired option, enter the service
code and press the navigation key or the OK soft key.
The service code is saved and the option will be
selectable when you access the appropriate menu.
89
Games
Games
Using this feature, you can play seven different
games with the phone:
•
•
•
•
•
•
•
Casino
Roulette
Black Jack
Sniper
Snake
Mole
Othello
High Score: enables you to view the highest score
recorded for the selected game. You can also reset
this score by pressing the Reset soft key.
If you break the current record for the game, the
phone displays the High Score screen.
To stop playing a game, press the C or
key.
Once you have selected a game, the following
options are available:
Play: allows you to start a game.
Level: allows you to select the level of difficulty.
Select the required level by sliding the navigation
key and press the key or the OK soft key. This option
is only available in games with several levels (Sniper,
Snake).
Configuration: allows you to configure the phone
for the chosen game (backlight and sound settings).
To adjust each setting, highlight the Backlight or
Sound option by sliding the navigation key up or
down, and then toggle between ON ( ✓) and OFF ( )
by pressing the navigation key or the On/Off soft key.
Instructions: describes the buttons used by the
game. If necessary, slide the navigation key to see a
more detailed description.
90
91
Voice Memo
Voice Memo
You can use the phone as a recorder by sliding the
navigation key right. In idle mode, it records a voice
memo, and while you are on the phone, it records the
phone conversation during a call.
To access the Voice Memo menu, slide the
navigation key right in idle mode.
Notes:
• Your phone can record up to 10 memos, and each
memo can be up to 1 minute in length of time.
• You can record a memo with the flip cover closed.
• Closing the flip cover while recording cancels the
recording.
• If you have an incoming call while recording a
voice memo, or the call is disconnected while
recording phone conversation, the memo recorded
up to that point is saved with the stamp of the
current date and time.
• When you are out of the service area(‘No Service’
is displayed)or in analog mode, a voice memo is
not correctly recorded. It is recommended that you
use this feature in digital mode in the service area.
Record
1. The message “Recording” displays, along with
the timer.
2. Record a memo by speaking to the microphone or
talking to the remote person.
3. To stop recording, press the Stop soft key.
If you are recording a phone conversation, it is
automatically saved by the title of the current
date and time.
If you are recording a voice memo, you are asked
to enter the title for the recorded message. Go to
next step.
4. Enter the desired title up to 16 digits using the
keypad, then press the Save soft key or the
navigation key to save the recording. For details
on entering characters, see page xx.
If you do not enter a title, Untitled is saved as
the label.
Note: Recording voice conversations is illegal in
some countries. Make sure the other party has
stated its consent to being recorded.
To record a voice memo, select this menu or slide the
navigation key and hold in idle mode.
To record a phone conversation, slide the navigation
key and hold while you are on the phone.
92
93
Voice Memo
Voice Memo
Replay & Delete
Edit Title
Using this menu, you can play back a recorded
message and delete it if you want.
You can change the title of the selected memo.
1. When the display shows the title of the currently
selected memo, slide the navigation key up or
down to display the memo you want to play.
2. Press the navigation key or the Play soft key to
play back the recorded message currently
displayed.
3. When you have finished reviewing, press the
Stop soft key.
4. If you want to delete the memo, press the Delete
soft key.
5. When the phone confirms your selection, press
the navigation key or the Yes soft key.
1. The display shows the title of the currently
selected memo. Slide the navigation key up or
down to scroll to the memo title you want to edit.
2. Press the navigation key or the Edit soft key.
3. Enter the desired title up to 16 digits using the
keypad. For details on entering characters, see
page xx.
4. When entering is done, press the navigation key or
the Save soft key to save the new title.
5. When you have finished, press the
return idle mode.
key to
If you do not want to delete the memo, press the
No soft key.
6. Repeat steps 1 through 5 as necessary.
7. When you have finished, press the
return to idle mode.
94
key to
95
Solving Problems
Solving Problems
Your correspondent cannot hear you speaking
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
• Have you switched off the microphone (mute)?
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
center of the phone.
“No service”, “Network failure” or “Not done”
is displayed
The phone starts beeping and “**Warning**
Low Battery” flashes in the display
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
• The battery power is weak. Replace the battery
and recharge it.
You have entered a number but it was not dialed
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have chosen to restrict outgoing calls.
Your correspondent cannot reach you
• Is your phone switched on (
pressed for
more than one second)?
• Are you accessing the right cellular network?
• You may have chosen to restrict incoming calls.
• You may be in a weak signal area. More and try
again.
The audio quality of the call is poor
• Check the signal strength indicator in the display
); the number of bars after it indicates the
signal strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialed when you recall a Phonebook
entry
• Check that the numbers have been stored
correctly, by using the Phonebook Search feature.
• Re-store the number, if necessary.
If the above guidelines do not enable you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG
after-sales service.
96
97
Health and Safety Information
Health and Safety
Information
Exposure to Radio Frequency (RF) Signals
Your mobile phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. Those guidelines are consistent with the
safety standard previously set by both U.S. and
international standards bodies:
• American National Standards Institute (ANSI)
IEEE. C95.1-1992
• National Council on Radiation Protection and
Measurement (NCRP). Report 86
• International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1996
• Ministry of Health (Canada), Safety Code 6.
The standards include a substantial safety margin
designed to assure the safety of all persons,
regardless of age and health.
Tests for SAR are conducted using standard operating
positions specified by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operation can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by
the FCC for each model. (Body-worn measurements
differ among phone models, depending upon available
accessories and FCC requirements). While there may
be differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safety exposure.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6W/kg.*
For body worn operation, to maintain compliance with
FCC RF exposure guidelines, use only Samsungapproved accessories. When carrying the phone while
it is on, use the specific Samsung belt-clip that has
been tested for compliance.
* In the U.S. and Canada, the SAR limit for mobile phones used by the public
is 1.6 watts/kg(w/kg) averaged over on gram of tissue. The standard
incorporates a substantial margin of safety to give additional protection for
the public and to account for any variations in measurements.
Use of non-SAMSUNG-approved accessories may
violate FCC RF exposure guidelines and should be
avoided.
98
99
Health and Safety Information
For additional information concerning exposure to
radio frequency signals, see the following websites:
Federal Communications Commission (FCC) RF
Safety program (select “Information on Human
Exposure to RF Fields from Cellular and PCS Radio
Transmitters”):
http://www.fcc.gov/oet/rfsafety
Health and Safety Information
Precautions When Using Batteries
Your phone is powered by a rechargeable Li-ion
standard battery.
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
Cellular Telecommunications Industry
Association (CTIA): http://www.wow-com.com
World Health Organization (WHO) International
Commission on Non-ionizing Radiation Protection
(select Qs & As):
http://www.who.int/emf
United Kingdom, National Radiological
Protection Board: http://www.nrpb.org.uk
U.S.Food and Drug Administration (FDA) Center
for Devices and Radiological Health:
http://www.fda.gov/cdrh/consumer/
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
100
101
Health and Safety Information
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and - terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice-almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of
a car, practice good common sense and remember
the following tips:
1. Get to know your wireless phone and its features
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If
possible, add an additional layer of convenience
and safety to your wireless phone with one of the
many hands-free accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, if possible,
let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain,
sleet, snow, ice, and even heavy traffic can be
hazardous.
102
103
Health and Safety Information
5. Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or flipping
through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road
and your mirrors, and continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are driving
and suspend conversations that have the potential
to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1
or other local emergency number in the case of
fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives
are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
104
Health and Safety Information
10. Call roadside assistance or a special nonemergencies wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal,
a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or other special nonemergency wireless number.
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference of danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it is
recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
105
Health and Safety Information
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone.
Pacemakers
Pacemaker manufacturers recommend that a
minimum separation of 6 inches (20 cm) be
maintained between a hand-held wireless phone and
a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 6
inches (15 cm) from their pacemaker when the
phone is switched on;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to
minimize the potential for interference.
• If you have any reason to suspect that
interference is taking place, switch off your
phone immediately.
Health and Safety Information
Other Medical Devices
If you use any other personal medical device, consult
the manufacturer of your device to determine if they
are adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining
this information. Switch off your phone in health
care facilities when any regulations posted in these
areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment that
has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices so require.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference,
you may want to consult your hearing aid
manufacturer to discuss alternatives.
106
107
Health and Safety Information
Health and Safety Information
Potentially Explosive Atmospheres
Vehicles
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Only qualified personnel should service the phone, or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty which may apply to the unit.
Users are advised to switch off the phone while at a
refueling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats; chemical transfer or storage
facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust
or metal powders; and any other area where you
would normally be advised to turn off your vehicle
engine.
Check regularly that all mobile phone equipment on
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including both installed or portable wireless
equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
Switch off your phone before boarding an aircraft.
The use of mobile phones in an aircraft may be
dangerous to the operation of the aircraft, disrupt the
wireless telephone network and may be illegal.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
108
109
Health and Safety Information
Health and Safety Information
Emergency Calls
Care and Maintenance
Important!
This phone, like any mobile phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely upon any wireless phone for essential
communications (for example, medical emergencies).
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you to fulfill any
warranty obligations and allow you to enjoy this
product for many years. When using your phone,
battery, charger, OR any accessory:
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 911 or other official emergency
number). Emergency numbers vary by location.
3. Press < >.
If certain features are in use (keyguard, restrict calls,
etc.), you may first need to turn those features off
before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident - do not cut
off the call until given permission to do so.
110
• Keep it and all its parts and accessories out of
small children’s reach.
• Keep it dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic
circuits.
• Do not use or store it in dusty, dirty areas as its
moving parts can be damaged.
• Do not store it in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store it in cold areas. When the phone
warms up (to its normal operating temperature),
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
• Do not drop, knock or shake it. Rough handling
can break internal circuit boards.
111
Health and Safety Information
Glossary
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean it. Wipe it with a soft
cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint it. Paint can clog the device’s moving
parts and prevent proper operation.
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone,
here are a few definitions.
Antenna
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications of
attachments could damage the phone and may
violate regulations governing radio devices.
A device for transmitting or receiving signals. The
size and shape of antennas is determined, in part, by
the frequency of the signal they receive. Wireless
phones and the base station must have antennas.
• If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
Call Diverting
Ability to reroute calls to another mobile or fixed
line.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Calling Line Identification Services (Caller-ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
Call Waiting
Ability to inform users that they have an incoming
call when engaged on another call.
112
113
Glossary
Glossary
Conference Calling
Soft Keys
Ability to establish a conference call involving up to
two additional parties.
Keys marked
and
on the phone, the purpose
of which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
Hands-Free
A feature that permits a driver to use a wireless
phone without lifting or holding the handset - an
important safety feature for automobiles, tractors
and most other motorized vehicles.
LCD (Liquid Crystal Display)
Commonly used to refer to the screen display on the
wireless phone.
Phone Password
Lock code used to unlock the phone when you have
selected the option to lock it automatically each time
it switches on, and security code used to restrict the
use of your phone.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
TDMA
Time division multiple access (TDMA) is a digital
transmission technology that allows a number of
users to access a single radio-frequency (RF) channel
without interference by allocating unique time slots
to each user within each channel. The TDMA digital
transmission scheme multiplexes three signals over a
single channel. The current TDMA standard for
cellular divides a single channel into six time slots,
with each signal using two slots, providing a 3 to 1
gain in capacity over advanced mobile-phone service
(AMPS). Each caller is assigned a specific time slot
for transmission.
Voice Mail
A computerized answering service that answers a
call, plays a greeting and records a message.
SMS (Short Message Service)
Network service for sending and receiving messages
to and from another subscriber without having to
speak to the correspondent. The message created or
received can be displayed, received, edited or sent.
114
115
be
ex will
The ind ter version.
d in la
update
Index
Accessories • 7
Adjusting volume • 22
Alarm (5.4) • 76
Alert Type (3.3) • 59
Answering
a call • 22
a second call • 42
Answer mode (4.5) • 66
Auto Redial (4.4) • 66
Backlight • 13; 64
contrast • 65
Batteries
charging • 16
installing • 14
low battery indicator • 17
precautions • 94
removing • 15
restriction (6.3) • 78
SOS (6.4) • 80
time (1.4) • 51
via the phonebook • 21
waiting (7.3) • 42, 82
Care • 96
Changing
lock code (6.1) • 78
security code (6.2) • 78
Characters
entering • 31
Charging batteries • 16
Composer
Melody (3.9) • 61
Conference calls • 43
Connect
to Voice Mail (2.1) • 52
tone (3.8) • 61
Contrast • 65
Correcting numbers • 20
Calculator (5.5) • 78
Calendar (5.1) • 70
Caller
group • 36
ID • 23
Calling card(4.9) • 68
Calls
answering • 22
a second call • 42
conference • 43
diverting (7.1) • 81
ending • 21
holding • 39
incoming (1.2) • 51
international • 20
making • 20
missed • 23; 50
outgoing (1.3) • 51
records (1) • 50
redialing automatically • 66
116
Earphone • 7
Earpiece
adjusting the volume • 20
Editing
memos • 71
messages • 54
missed calls• 24
phonebook numbers • 34
To Do List • 73
Voice memo title • 91
Erasing
memos • 72
missed calls • 25
phonebook numbers • 34
tasks • 74
voice memo • 89
Error Tone (3.6) • 60
Key tones
adjusting the volume • 22
muting • 41
selecting • 59
sending • 41
Keys
description • 9
location • 8
navigation • 27
Date
format (5.3.4) • 75
setting (5.3.2) • 75
Deleting
memos • 72
missed calls • 25
phonebook numbers • 34
tasks • 74
voice memo • 89
Display • 11
contrast • 69
icons • 12
setting the
language (4.7) • 67
Diverting calls (7.1) • 81
Functions
selecting • 26
Language (4.7) • 67
Last number redialing • 21
Length of calls • 51
Letters
entering • 31
Light
backlight • 13; 64
service • 13; 65
Lock code • 78
Locking phone • 19
Low battery indicator • 17
Games (8) • 85
Greeting Message (4.1) • 64
Groups
caller • 36
Maintenance • 98
Melody Composer (3.9) • 61
Memory status • 38
Memos
editing • 71
erasing • 72
writing • 71
Menus
by scrolling • 44
by shortcut • 45
list • 46
using • 44
Message Tone (3.5) • 60
Messages
greeting (4.1) • 64
preset (2.4) • 56
reading (2.2) • 53
setup (2.5) • 56
voice mail (2.1) • 52
writing (2.3) • 55
Index
Holding calls • 39
Icons
description • 12
ID, caller • 23
Identifying a caller • 23
Incoming Calls (1.2) • 50
117
Index
Index
M (continued)
S (continued)
Microphone mute • 40
Minute Minder (3.7) • 61
Missed calls (1.1) • 50
deleting • 25
editing the number • 24
viewing • 23; 50
Mute
key tones • 41
microphone • 40
Phone
locking • 19
Settings (4) • 64
switching on/off • 18
Phonebook • 30
dialing • 35
editing numbers • 34
erasing numbers • 34
making calls • 20
moving numbers • 34
options • 33
searching • 35; 41
storing numbers/names • 30
Playing, voice memo • 89
Preset Message List (2.4) • 56
Problem solving • 92
Sending
key tones • 41
messages • 55
Service code (7.6) • 85
Service light • 13; 65
Setting
alarm (5.4) • 76
date (5.3.2) • 75
display language • 67
time (5.3.1) • 74
Settings
resetting (4.8) • 67
Setup (2.5) • 56
Silent mode • 25
Slide Menu (4.6) • 67
SMS
setup (2.5) • 56
text message icon • 52
using • 42; 52
Soft keys, using • 26
Solving problems • 92
Sound Settings (3) • 58
Speed Dialing • 32
Switching on/off
microphone • 40
phone • 18
NAM, selecting (7.5) • 84
Names
entering • 31
options • 36
searching/dialing • 35
storing in the
phonebook • 30
Network Selection (7.3) • 82
Network Services (7) • 81
Number
correcting • 20
editing
missed call • 24; 50
phonebook • 34
erasing phonebook • 34
moving phonebook • 35
own • 38
redialing • 21
automatically • 66
searching/dialing •35
storing in the
phonebook • 30
Read Messages (2.2) • 52
Recording,
voice memo • 88
Redialing
automatically • 66
last number • 21
Replaying,
voice memo • 89
Reset Settings (4.8) • 67
Restriction, call • 79
Ring
Tone (3.2) • 58
type • 59
Volume (3.1) • 58
Roaming • 82
Options
selecting • 26
Organizer (5) • 70
Outgoing Calls (1.3) • 51
Own Number • 38
118
Safety
batteries • 94
information • 96
precautions • 5
Security (6) • 78
Schedule •68
Searching for names/numbers
• 35; 41
Security code • 78
Selecting functions/options
• 26
Tone
connect (3.8) • 61
error (3.6) • 60
length (3.4) • 59
melody •58
message (3.5) • 60
ring (3.2) • 58
Travel charger • 16
Vibration • 59
Voice mail (2.1) • 52
Voice memo pad • 88
Voice privacy (7.4) • 84
Voice Server Number
(2.1.2) • 53
Volume
adjusting • 22
selecting the ring (3.1) • 58
Waiting
call • 42; 82
World Time (5.3.3) • 75
Write Messages (2.3) • 55
Writing memos • 71
Tasks
defining• 72
deleting • 74
editing • 73
sorting • 74
Text messages • 52
icon • 52
preset (2.4) • 56
reading (2.2) • 53
setup (2.5) • 56
writing (2.3) • 55
Time
calls (1.4) • 51; 61
format (5.3.4) • 73
setting (5.3.1) • 72
world (5.3.3) • 73
To Do List (5.2) • 72
119
Index
120
Access
the Menu
Function
➀ Press the Menu soft key.
➁ Scroll through the list of
menus until you reach the
required menu by sliding
the navigation up or
down.
➂ Press the navigation or
the Select soft key.
➃ Scroll through the list of
options until the required
one is selected by sliding
the navigation up or
down.
➄ Press the navigation or
the Select soft key.
121
• Each of the two soft keys (
and
performs the function indicated by the
text above it (bottom line in the display).
TDMA Mobile Telephone STH-N375
Quick Reference Card
Switch On/Off
Press and hold
Make a Call
➀ Key in the number.
➁ Press
End a Call
Briefly press
View Missed
Calls right
after they
were missed
➀ Open the phone and
press the View soft
key.
➁ Scroll through the
missed calls by sliding
the navigation up or
down.
➂ To return the call,
press
FDA Consumer Update
Answer a
Call
Open the flip cover
or
Slide the navigation up
or down during a call.
Press
Adjust the
Earpiece
Volume
➀ Select the Alert Type
menu option (3.3).
➁ Select an option:
Light only, Melody,
Vibration, Vibra+
Melody and Step
Melody.
➂ Press the navigation
or the Select soft
key to confirm.
Choose the
Alert Type
The U.S.Food and Drug Administration’s Center
for Devices and Radiological Health Consumer
Update on Mobile Phones
FDA has been receiving inquiries about the safety of mobile
phones, including cellular phones and PCS phones. The
following summarizes what is known-and what remains
unknown-about whether these products can pose a hazard to
health, and what can be done to minimize any potential risk.
This information may be used to respond to questions.
Why the concern?
Search for
a Number
in the
Phonebook
Store
Numbers
in the
Phonebook
➀ Press the Name soft key.
➁ Enter the start of the
name.
➂ Press the Search soft key.
➃ To scroll through the
names, slide the
navigation up or down.
➄ To make a call, press the
➀ Key in the number.
➁ Press the Save soft key.
➂ Enter the name.
➃ Press the navigation or the
OK soft key.
➄ If necessary, change the
location.
➅ Press the navigation or the
OK soft key.
Mobile phones emit low levels of radiofrequency energy
(i.e.,radiofrequency radiation) in the microwave range while
being used. They also emit very low levels of radiofrequency
energy (RF), considered non-significant, when in the stand-by
mode. It is well known that high of RF can produce biological
damage through heating effects (this is how your microwave
oven is able to cook food). However, it is not known whether,
to what extent, or through what mechanism, lower levels of
RF might cause adverse health effects as well. Although
some research has been done to address these questions, no
clear picture of the biological effects of this type of radiation
has emerged to date. Thus, the available science does not
allow us to conclude that mobile phones are absolutely safe,
or that they are unsafe. However, the available scientific
evidence does not demonstrate any adverse health effects
associated with the use of mobile phones.
What kinds of phones are in question?
Questions have been raised about hand-held mobile phones,
the kind that have a built-in antenna that is positioned close
to the user’s head during normal telephone conversation.
These types of mobile phones are of concern because of the
122
123
short distance between the phone’s antenna-the primary
source of the RF-and the person’s head. The exposure to RF
from mobile phones in which the antenna is located at
greater distances from the user(on the outside of a car, for
example) is drastically lower than that from hand-held
phones, because a person’s RF exposure decreases rapidly
with distance from the source. The safety of so-called
“cordless phones,” which have a base unit connected to
the telephone wiring in a house and which operate at far
lower power levels and frequencies, has not been
questioned.
How much evidence is there that hand-held
mobile phones might be harmful?
Briefly, there is not enough evidence to know for sure,
either way; however, research efforts are on-going. The
existing scientific evidence is conflicting and many of the
studies that have been done to date have suffered from
flaws in their research methods. Animal experiments
investigating the effects of RF exposures characteristic of
mobile phones have yielded conflicting results. A few
animal studies, however, have suggested that low levels of
RF could accelerate the development of cancer in
laboratory animals. In one study, mice genetically altered to
be predisposed to developing one type of cancer developed
more than twice as many such cancers when they were
exposed to RF energy compared to controls. There is much
uncertainty among scientists about whether results
obtained from animal studies apply to the use of mobile
phones. First, it is uncertain how to apply the results
obtained in rats and mice to humans. Second, many of the
studies that showed increased tumor development used
animals that had already been treated with cancer-causing
chemicals, and other studies exposed the animals to the RF
virtually continuously-up to 22 hours per day.
For the past five years in the United States, the mobile
phone industry has supported research into the safety of
mobile phones. This research has resulted in two findings
in particular that merit additional study:
124
1. In a hospital-based, case-control study, researchers looked
for an association between mobile phone use and either
glioma (a type of brain cancer) or acoustic neuroma (a
benign tumor of the nerve sheath). No statistically
significant association was found between mobile phone
use and acoustic neuroma. There was also no association
between mobile phone use and gliomas when all types of
types of gliomas were considered together. It should be
noted that the average length of mobile phone exposure in
this study was less than three years.
When 20 types of glioma were considered separately,
however, an association was found between mobile phone
use and one rare type of glioma, neuroepithelliomatous
tumors. It is possible with multiple comparisons of the
same sample that this association occurred by chance.
Moreover, the risk did not increase with how often the
mobile phone was used, or the length of the calls. In fact,
the risk actually decreased with cumulative hours of
mobile phone use. Most cancer causing agents increase
risk with increased exposure. An ongoing study of brain
cancers by the National Cancer Institute is expected to
bear on the accuracy and repeatability of these results.1
2. Researchers conducted a large battery of laboratory tests
to assess the effects of exposure to mobile phone RF on
genetic material. These included tests for several kinds of
abnormalities, including mutations, chromosomal
aberrations, DNA strand breaks, and structural changes in
the genetic material of blood cells called lymphocytes.
None of the tests showed any effect of the RF except for
the micronucleus assay, which detects structural effects on
the genetic material. The cells in this assay showed
changes after exposure to simulated cell phone radiation,
but only after 24 hours of exposure. It is possible that
exposing the test cells to radiation for this long resulted in
heating. Since this assay is known to be sensitive to
heating, heat alone could have caused the abnormalities to
occur. The data already in the literature on the response of
the micronucleus assay to RF are conflicting. Thus, followup research is necessary.2
125
FDA is currently working with government, industry, and
academic groups to ensure the proper follow-up to these
industry-funded research findings. Collaboration with the
Cellular Telecommunications Industry Association(CTIA) in
particular is expected to lead to FDA providing research
recommendations and scientific oversight of new CTIAfunded research based on such recommendations.
Two other studies of interest have been reported recently in
the literature:
1. Two groups of 18 people were exposed to simulated
mobile phone signals under laboratory conditions while
they performed cognitive function tests. There were no
changes in the subjects’ ability to recall words, numbers,
or pictures, or in their spatial memory, but they were
able to make choices more quickly in one visual test
when they were exposed to simulated mobile phone
signals. This was the only change noted among more
than 20 variables compared.3
2 . In a study of 209 brain tumor cases and 425 matched
controls, there was no increased risk of brain tumors
associated with mobile phone use. When tumors did
exist in certain locations, however, they were more
likely to be on the side of the head where the mobile
phone was used. Because this occurred in only a small
number of cases, the increased likelihood was too small
to be statistically significant.4
In summary, we do not have enough information at this
point to assure the public that there are, or are not, any
low incident health problems associated with use of mobile
phones. FDA continues to work with all parties, including
other federal agencies and industry, to assure that research
is undertaken to provide the necessary answers to the
outstanding questions about the safety of mobile phones.
126
What is known about cases of human cancer
that have been reported in users of hand-held
mobile phones?
Some people who have used mobile phones have been
diagnosed with brain cancer. But it is important to
understand that this type of cancer also occurs among
people who have not used mobile phones. In fact, brain
cancer occurs in the U.S. population at a rate of about 6
new cases per 100,000 people each year. At that rate,
assuming 80 million users of mobile phones (a number
increasing at a rate of about 1 million per moth), about
4800 cases of brain cancer would be expected each year
among those 80 million people, whether or not they used
their phones. Thus it is not possible to tell whether any
individual’s cancer arose because of the phone, or whether
it would have happened anyway. A key question is whether
the risk of getting a particular form of cancer is greater
among people who use mobile phones than among the rest
of the population. One way to answer that question is to
compare the usage of mobile phones among people with
brain cancer with the use of mobile phones among
appropriately matched people without brain cancer. This is
called a case-control study. The current case-control study
of brain cancers by the National Cancer Institute, as well
as the follow-up research to be sponsored by industry, will
begin to generate this type of information.
What is FDA’s role concerning the safety of
mobile phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as mobile phones before
marketing, as it does with new drugs or medical devices.
However, the agency has authority to take action if mobile
phones are shown to emit radiation at a level that is
hazardous to the user. In such a case, FDA could require the
manufacturers of mobile phones to notify users of the
health hazard and to repair, replace or recall the phones so
that the hazard no longer exists.
127
Although the existing scientific data do not justify FDA
regulatory actions at this time, FDA has urged the mobile
phone industry to take a number of steps to assure public
safety. The agency has recommended that the industry:
• support needed research into possible biological effects of
RF of the type emitted by mobile phones:
• design mobile phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
• cooperate in providing mobile phone users with the best
possible information on what is known about possible
effects of mobile phone use on human health.
At the same time, FDA belongs to an interagency working
group of the federal agencies that have responsibility for
different aspects of mobile phone safety to ensure a
coordinated effort at the federal level. These agencies are:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communication Commission
• Occupational Health and Safety Administration
• National Telecommunications and Information
Administration
for shorter conversations for for situations when other
types of phones are not available.
Phone who must conduct extended conversations in their
cars every day could switch to a type of mobile phone that
places more distance between their bodies and the source
of the RF, since the exposure level drops off dramatically
with distance. For example, they could switch to:
• a mobile phone in which the antenna is located outside
the vehicle,
• a hand-held phone with a built-in antenna connected to a
different antenna mounted on the outside of the car or
built into a separate package, or
• a headset with a remote antenna to a mobile phone
carried at the waist.
Again, the scientific data do not demonstrate that mobile
phones are harmful. But if people are concerned about the
radiofrequency energy from these products, taking the
simple precautions outlined above can reduce any possible
risk.
Where can I find additional information?
For additional information, see the following websites:
The National Institutes of Health also participates in this
group.
In the absence of conclusive information about
any possible risk, what can concerned
individuals do?
If there is a risk from these products-and at this point we do
not know that there is-it is probably very small. But if people
are concerned about avoiding even potential risks, there are
simple steps they can take to do so. For example, time is a
key factor in how much exposure a person receives. Those
persons who spend long periods of time on their hand-held
mobile phones could consider holding lengthy conversations
on conventional phones and reserving the hand-held models
128
Federal Communications Commission (FCC) RF Safety
Program (select “Information on Human Exposure to RF
Fields from Cellular and PCS Radio Transmitters”):
http://www.fcc.gov/oet/rfsafety
World Health Organization (WHO) International
Commission on Non-Ionizing Radiation Protection (select Qs
& As): http://www.who.int/emf
United Kingdom, National Radiological Protection
Board: http://www.nrpb.org.uk
Cellular Telecommunications Industry Association
(CTIA): http://www.wow-com.com
129
U.S Food and Drug Administration (FDA) Center for
Devices and Radiological Health:
http://www.fda.gov/cdrh/consumer/
Muscat et al. Epidemiological Study of Cellular Telephone Use and
Malignant Brain Tumors. In: State of the Science Symposium;1999
June 20; Long Beach, California.
Tice et al. Tests of mobile phone signals for activity in genotoxicity and
other laboratory assays. In: Annual Meeting of the Environmental
Mutagen Society; March 29, 1999, Washington, D.C.; and personal
communication, unpublished results.
Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and
Varey, A. Effect of a 915-MHz simulated mobile phone signal on
cognitive function in man. Int. J. Radiat. Biol., April 8, 1999
Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of
cellular telephones and the risk for brain tumors: a case-control study.
Int. J. Oncol., 15:113-116, 1999.
130

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:11:07 09:58:01
Producer                        : Acrobat Distiller 4.0 for Macintosh
Modify Date                     : 2001:11:07 10:16:45-08:00
Page Count                      : 68

EXIF Metadata provided by EXIF.tools