Samsung Electronics Co WCK720Q Wi-Fi/BT Transceiver User Manual

Samsung Electronics Co Ltd Wi-Fi/BT Transceiver

a href="https://usermanual.wiki/Samsung-Electronics-Co" itemprop="url"> Samsung Electronics Co >

User Manual

Version 1.0 Samsung Electronics page 1 of 6 User manual of WCK720Q 1. Introduction WCK720Q is a Wi-Fi / Bluetooth Combo module compliant with IEEE802.11 a.b.g.n.ac MAC/baseband/radio applications. The core chipset is from Qualcomm, part number QCA9378-7. 2. Hardware Architecture: 2.1 Main Chipset Information Item Vendor Part Number IEEE802.11 a.b.g.n.ac mac/baseband/radio Qualcomm QCA9378-7 2.2 Circuit Block Diagram The major internal and external block diagram of WCK720Q is illustrated in Figure 1-1. Figure 1-1 WCK720Q block diagram and System Interface
Version 1.0 Samsung Electronics page 2 of 6 3. Operational Description WCK720Q is the 802.11a/b/g/n /ac WIFI Module that acts as a communication controller for users of a wireless device to connect to SMART TV - Features >IEEE 802.11ac Draft compliant. >Dual-band 2.4GHz /5 GHz >Dual-stream spatial multiplexing up to 867Mbps data rate >Support 20,40,80MHz channel with optional SGI(256QAM modulation) >On-chip power amplifiers and low –noise amplifiers for both bands - Time base of the RF frequency For IF and RF frequency, a crystal(48MHz) is a clock reference. - Synthesizer Synthesizer inside Transceiver. Internal voltage controlled oscillator (VCO) provides the desired LO signal base on the phase-locked loop (PLL) with a relatively wide tuning range for this application. Internal fractional nPLL allows support for a wide range of reference clock frequencies - WIFI Transmission Baseband data is modulated and upconverted to the 2.4GHz ISM and 5-GHz U-NII bands,respectively. Linear on chip power amplifier are included, which are capable of delivering high output powers while Meeting IEEE802.11ac and IEEE802.a/b/g/n specifications without the need for external Pas. When using the internal Pas, closed-loop output power control is completely integrated. Base-band Processing (BBP) IC has DSSS (BPSK/QPSK/CCK) and OFDM (BPSK/QPSK/16QAM/64QAM/25QAM) modulation function, it provides transmission data rate are 1, 2, 5.5, 11Mbps on DSSS and 6, 12, 18, 24, 36, 48, 54 Mbps on OFDM. Digital data signal will be converted to analog (TX IQ) signals through DAC in BBP IC, TX IQ pass through to low pass filter. TX I/Q signal use direct conversion (zero-IF) architecture converter to generate carrier frequency signal. Transceiver IC and internal PA magnify output power. - WIFI Receiver The QCA9378-7 has a wide dynamic range, direct conversion receiver that employs high-order on-chip channel filtering to ensure reliable operation in the noisy 2.4GHz ISM band or the entire 5GHz U-NII band .Control signals are available that can support the use of optional LNAs for each band,which can increase the receive sensitivity by several decibels. Reverse direction isolation of LNA inside Transceiver IC suppresses unwanted radiation. Then RF signal will be directly down to IF signal (RX IQ) and high frequency spurious emissions are suppressed by LPF. At last RX IQ signal will be demodulated digital data.
Download:
Mirror Download [FCC.gov]
Document ID2867493
Application IDMPBrlop5mh901AXaeL0yJA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.36kB (367058 bits)
Date Submitted2016-01-08 00:00:00
Date Available2016-01-08 00:00:00
Creation Date2016-01-07 15:08:05
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2016-01-07 15:08:05
Document TitleMicrosoft Word - Manual_FCC__WCK720Q_English_20160107_
Document CreatorPScript5.dll Version 5.2.2
Document Author: HWJ
FCC ID Filing: A3LWCK720Q

Navigation menu