Savi Technology ST-900-CP Mobile Security Parent User Manual User manaul

Mobile Security Parent

(ST-900-CP)

User Guide

Manufacturing plant :

Dae Kyung Philippines., Inc.

Lot No. 1-6, Block 20, Phase IV , Main Avenue,

PEZA , Rosario, Cavite 4106, Philippines

Manufacturer :

Savi Technology, Inc.

3601 Eisenhower Avenue, STE 280, Alexandria VA

22304

Tel : (571) 227-7950

Fax : (571) 227-7960

NOTICE

copyright laws, this manual, software and electronic circuitry may not be copied, in whole or in

part without written prior consent of Savi Technology, Inc..

All information provided in this document is carefully prepared and offered in good faith as a

guide in the installation, use and servicing of our products. Installers must ensure that the final

installation operates satisfactorily within the relevant regulatory requirements. Savi Technology,

Inc..accepts no responsibility for incorrect installation. Savi Technology, Inc.. reserves the right to

change products, specifications and installation data at any time without notice.

Savi Technology, Inc.. makes certain limited warranties with respect to defective diskettes,

documentation and electronic circuitry. Please see the associated information contained on this

page.

LIMITED WARRANTY

With respect to the physical documentation and physical electronic circuitry enclosed herein, Savi

Technology, Inc.. warrants the same to be free of defects in materials and workmanship for a

period of one year from the date of purchase. In the event of notification within the warranty

period of defects in material or workmanship, Savi Technology, Inc.. will replace the defective

diskettes, documentation and electronic circuitry. The remedy for breach of this warranty shall be

limited to replacement and shall not encompass any other damages including but not limited to

loss of profit and special incidental, consequential, or other similar claims.

Savi Technology, Inc.. specifically disclaims all other warranties, expressed or implied, including but

not limited to implied warranties of merchantability and fitness for a particular purpose with

respect to defects in the documentation and electronic circuitry and the program license granted

herein, in particular, and without limiting operation of the program license with respect to any

particular application, use or purpose.

IMPORTANT SAFETY INFORMATION

NOTE : The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user's

authority to operate the equipment.

RF EXPOSURE STATEMENT

Your Transmitter contains a radio frequency transmitter. When physical damage or un-lock is the transmitter

sends our RF signals. To comply with FCC RF exposure compliance requirements, a separation distance of at

least 11.81 inches (30 cm) must be maintained between the antenna of this transmitter and all persons,

during normal operation.

The antenna used for this transmitter must not be collocated or operating in conjunction with any other

antenna of transmitter. Unauthorized antennas, modifications, of attachments could damage the transceiver

and may violate FCC regulations.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

Table of Contents

About the Savi Security Sensor Family .......................................................................................... 5

Introduction .................................................................................................................................. 5

What’s New? ............................................................................................................................... 5

Sensor Family and Components .................................................................................................... 6

Sensor Models ............................................................................................................................ 6

Specifications .............................................................................................................................. 7

Using the Sensors ........................................................................................................................... 8

Turning on the Mobile Security Parents and/or Child Sensors .................................................. 8

Charging the Mobile Security Parent .......................................................................................... 8

LED Light Patterns ...................................................................................................................... 9

Journeys with a Mobile Security Parent Only ............................................................................... 12

Creating the Journey ................................................................................................................. 12

Arming the Mobile Security Parent ........................................................................................... 13

Journeys with One or More Mobile Security Child Sensors ......................................................... 16

Creating the Journey ................................................................................................................. 16

Arming the Mobile Security Parent and Child ........................................................................... 17

Troubleshooting ............................................................................................................................ 20

Replacing a Child Sensor ......................................................................................................... 20

Maintenance.................................................................................................................................. 24

Cleaning Instructions ................................................................................................................. 24

Replacing a Cable ..................................................................................................................... 24

Storing the Sensors ................................................................................................................... 24

About the Savi Security Sensor Family

Introduction

The Savi Security Sensor Family provides users security and visibility while tracking

high-value assets and cargo throughout their global supply chains. Savi Tracking is

designed to provide users a seamless and complete view of the location and security

status of in-transit assets and cargo.

With an in-house security sensor system that is purpose-built to integrate directly with

Savi Tracking, we are able to provide users a powerful, low-cost, all-in-one tracking and

security solution that is complete with encrypted data capabilities and two-way, over-

the-air communication.

The Savi Security Sensor Family consists of two types of Parent Security Sensors and

Child Security Sensors.

What’s New?

The Savi Security Sensor Family features advanced, powerful sensors while being

small, light, and convenient to handle. Our new, easy-to-use design features a built-in

cable and a lock that secures with the push of a finger. The devices are already pre-

configured to work seamlessly with our Savi Tracking software.

Sensor Family and Components

Sensor Models

Mobile Security Parent

Model No. ST-900-CP

Specifications

Mobile Security Parent,

ST-900-CP

PHYSICAL

LxWxH  88 mm x 46 mm x 168 mm

Standard Cable Length  300 mm

Weight  0.36 kg

ENVIRONMENTAL

Temperature  -30°C to +50°C Operating

 -40°C tp +70°C Non-Operating

Humidity  95% RH @ 50°C Non-Condensing

Vibration and Shock  U.S. Military Standards 202G and 810F, SAE J1455

Weatherproofing  IP67

WIRELESS

Frequency  433 MHz(UHF), 123KHz(LF) , 850/900/1800/1900 MHz

Protocol  ISO 18000-7 (Active RFID), Quad-Band GPRS

Location  22-channel GPS with Cellular Triangulation Backup

POWER

Battery  DC 3.7V / 2800 mAh Li-polymer battery

REGULATORY APPROVALS

RoHS Compliant

EMC/EMI  SAE J1113, FCC-Part 15B, Industry Canada

Global Certifications  FCC, CE, I-SAFE (ATEX, IEC, UL913 Zone 1 Groups A,B,C,D)

SENSORS

 3-axis accelerometer

 Motion

Using the Sensors

Turning on the Mobile Security Parents and/or Child Sensors

For the Mobile Security Parent and Child Sensors:

To turn on the Mobile Security Parent and Child Sensors, pull the plungers up.

For the Vehicle Security Gateway:

Turn on the truck or vehicle ignition to turn on the sensors.

Charging the Mobile Security Parent

The Mobile Security Parent is rechargeable with a USB cable. Charge sensors using

the Savi-approved Mini USB cable and charger by plugging it into an outlet that is

connected to a power source.

Note: Mobile Security Child is not rechargeable. The Vehicle Security Gateway is

recharged automatically once connected to the vehicle power.

LED Light Patterns

All Savi Security Sensors include a two-color red/green LED indicator that details

various status conditions.

These LED patterns are defined below and should be used to assist in system operation

and troubleshooting as necessary.

Parent Sensor LED Patterns

Initialization

Low Battery Alert

GSM Connection

Good

GPRS Connection

Good

TCP Connection

Good

Communicating

with Server

Searching for

Child

Paired Child

Located

Ready to Arm/No

GPS Fix

Ready to

Arm/GPS Fix

Security Tamper

Child Sensor LED Patterns

Initialization

Low Battery

Alert

Communicating

with Parent

Searching for

Parent

Paired Parent

Located

Ready to

Arm/Parent

Linked

Security

Tamper

Journeys with a Mobile Security Parent Only

Creating the Journey

1. Log into Savi Tracking.

2. Create a Journey by performing the following steps:

a. Select an Owner and Corridor from the drop-down list.

b. Enter the Asset Number.

c. Enter the Mobile Security Parent serial number in the “Tracking Tag” field.

d. Click “Begin Journey” to indicate you are ready to arm tags.

Arming the Mobile Security Parent

1. Turn on the sensor.

2. Loop the pin and cable through lock or door on container or vehicle.

3. Push pin down into the plunger firmly until it clicks into place. Then push the

plunger down to arm and lock the sensor.

4. The green bullet will display in Savi Tracking to show that the Mobile Security

Parent is armed and ready.

5. Once the Mobile Security Parent is armed, select “Depart Journey” from the

drop-down list.

6. The Current Status of the journey will change to “Secure Transit”.

Journeys with One or More Mobile Security Child

Sensors

Creating the Journey

1. Log into Savi Tracking.

2. Create a Journey by performing the following steps:

a. Select an Owner and Corridor from the list.

b. Enter the Asset Number. It is possible to either work with a registered

asset or with a non-registered asset. If a registered asset is selected from

the drop-down list, then the Tracking Tag field will automatically be filled in

with the Vehicle Security Gateway serial number.

c. When working with a non-registered asset, enter the Mobile Security

Parent serial number in the “Tracking Tag” field.

d. Scroll down to the Tag Details section and enter the Security Child Sensor

IDs and Tag Point Names.

e. When done, click Begin Journey.

Arming the Mobile Security Parent and Child

1. Turn on the sensors; make sure the Parent and Child are in close proximity to

each other. Verify LED lights for successful pairing.

2. To arm the both the Mobile Security Parent and the Mobile Security Child, loop

the pin and cable through lock or door on container or vehicle.

3. Push pin down into the plunger firmly until it clicks into place. Then push the

plunger down to arm and lock the sensor.

4. The green bullets will display in Savi Tracking to show that the Mobile Security

Child Sensors are armed and ready.

5. Once the Child Sensors are armed, select “Depart Journey” from the drop-down

list.

6. The Current Status of the journey will change to “Secure Transit.”

Troubleshooting

Replacing a Child Sensor

For various reason, it may be necessary to replace a Child Sensor on a journey, for

example because:

 The child sensor isn’t pairing with the parent sensor

 The child sensor isn’t arming

 The Child sensor has a low battery

To replace a Child Sensor on a journey, perform the following steps:

1. Search for the journey using the Journey screen.

2. Click on the journey to display the journey details.

3. Click on Full Details to display the full journey details.

4. Click pencil symbol to edit the journey:

5. Delete the sensor that needs to be replaced by clicking on the “X” symbol next to

it.

6. Add a new sensor by start typing the Child Sensor ID and selecting it from the

drop-down list.

7. When done, click “Save”

Maintenance

Cleaning Instructions

TBD

Replacing a Cable

TBD

Storing the Sensors

TBD

Printed in the United States of America. All trademarks used are properties of their respective owners. This document is proprietary

to Savi Technology. Do not reproduce, use or disclose without permission. We have made every effort to ensure the accuracy of all

information contained in this document; however, Savi Technology makes no expressed or implied warranty or representation based

upon the enclosed information.

Savi Technology ST-900-CP Mobile Security Parent User Manual User manaul

Savi Technology Inc Mobile Security Parent User manaul

Contents

User manaul

Navigation menu

Namespaces

Views

Navigation