Seav s r l BEFREE Remote Control Transmitter User Manual TX MULTICANALE

Download:
Mirror Download [FCC.gov]
Document ID	797291
Application ID	WCzP809NHSBmnvqT+Ix8ow==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.46kB (55757 bits)
Date Submitted	2007-05-28 00:00:00
Date Available	2007-05-28 00:00:00
Creation Date	2007-05-08 10:44:53
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-05-08 10:45:04
Document Title	TX MULTICANALE
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	ILLUMINATI GIANFRANCO

GB
BEFREE X1 RADIO CONTROL
The radio control in the BeFree x1 series can be used
to control (Up – Stop – Down) user commands.
Codes are transmitted using an 18-bit random
system, which can be used in conjunction with other
transmitters in the same series and may be integrated
perfectly with SEAV receivers and electronic control
units.
- Mod. BeFree S1:
- Mod. BeFree H1:
433.92 MHz
868.30 MHz
TECHNICAL DATA
- Alkaline battery powered
- Operating frequency
- Combinations
- Max. consumption
- Operating temperature
- Dimensions
: 12 V mod. 23 A
: see model
: 32768
: 25 mA
: -10 to + 70 °C
: 120 x 45 x 15 mm.
Copying all the information contained in the radio
control:
It is only possible to copy all the transmission codes
on the radio control if the products are the same
model.
To copy all the information between radio controls,
proceed as follows: connect the two radio controls
using the cable supplied as an “optional extra”; press
and hold any button on the source radio control for 2
seconds. The LED on the destination radio control
the information will flash 3 times to indicate that the
operation is complete.
WARNING! The default configuration of the radio
control has no password protection; it is therefore
possible to copy all information. If the radio control is
supplied with a password enabled it will not be
possible to carry out the copying process.
Other functions using a PC:
The radio control can be connected to a Personal
Computer using the “SW 2188” software package
which is supplied as an optional extra and enables
you to utilise further functions.
Other functions using a Programmer:
The radio control can be connected to a “PGM 2191”
portable Programmer which is supplied as an optional
extra and enables you to utilise further functions.
WARNING
− The battery should be replaced every year to
guarantee the optimal range of the transmitter.
− To replace the exhausted battery, take the plastic
lid off, remove the battery and replace it with a new
one, observing the correct battery polarities.
− Used batteries should be discarded in special
collection bins.
OPERATING DESCRIPTION
The radio control has 3 command buttons - UP, STOP
and DOWN - and an indicator LED. The LED flickers
when a transmission code is being sent.
SEAV s.r.l. hereby declares that the below product:
BeFree Series Radio Control
complies with the specifications set out in the
Directive R&TTE 99/5/EC.
INITIAL OPERATING CONDITION
The radio control is supplied by the manufacturer with
default random codes.
OPERATING MODES
Creating a new random code (Reset):
The radio control is supplied by the manufacturer with
default random codes. If you want to create a new set
of random codes, perform the RESET procedure as
follows: press and hold the UP, STOP and DOWN
buttons simultaneously for 2 seconds. After the LED
lights up, press the UP and DOWN buttons within 5
seconds. The LED will flash 3 times to indicate that
the process is complete.
WARNING! The RESET procedure completely
deletes the default codes.
-1-
Rev. 2.0
27 April 2007
FCC ID: QUS-BEFREE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
WARNING
Any adjustments or modifications that have not been
expressly approved by the holder of the legal
conformity certificate may invalidate the user’s rights
relating to the operation of the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:19b313e5-62be-4dca-87ad-7f0fbfb72baf
Producer                        : Acrobat Distiller 6.0 (Windows)
Company                         : SEAV s.r.l.
Source Modified                 : D:20070508140425
Headline                        : 
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2007:05:08 10:45:04-04:00
Create Date                     : 2007:05:08 10:44:53-04:00
Metadata Date                   : 2007:05:08 10:45:04-04:00
Document ID                     : uuid:e892759c-874a-4121-bc28-859667a55069
Version ID                      : 6
Format                          : application/pdf
Title                           : TX   MULTICANALE
Creator                         : ILLUMINATI GIANFRANCO
Subject                         : 
Tagged PDF                      : Yes
Author                          : ILLUMINATI GIANFRANCO

EXIF Metadata provided by EXIF.tools