Seco Larm Usa Surface Type Door Closer Sd C141S Users Manual
SD-C141S to the manual 7ca51d03-db14-49e6-85e1-539f6d0dd194
2015-02-06
: Seco-Larm-Usa Seco-Larm-Usa-Surface-Type-Door-Closer-Sd-C141S-Users-Manual-527302 seco-larm-usa-surface-type-door-closer-sd-c141s-users-manual-527302 seco-larm-usa pdf
Open the PDF directly: View PDF 
.
Page Count: 15
| Download | |
| Open PDF In Browser | View PDF |
Surface-Type Door Closer SD-C141S With Adjustable Sweep and Latch Speed Two independent valve adjustments: 1. Latch speed 2. Sweep speed Access Reversible non-handed design. For metal or wood doors up to 42" (107cm) wide. Two independent valve adjustments for easy setting of sweep and latch speed. Back plate slides into place to cover adjustment screws. Narrow projection of only 13/8" (35mm). Anodized aluminum body. Silver finish. Forged steel arms. Includes complete mounting hardware. Rim-Type Exit Device SD-962AR-36A SD-962HL-4A For Exit Doors from 30" (76cm) to 48" (122cm) Wide Entry-Type Lever Trim, Non-Handed NEW SD-962AR-36A SD 962AR 36A For exit doors -- Allows exit from inside while locked from outside. Reversible non-handed design. For metal or wood doors up to 13/4" (45mm) thick. Stainless-steel, 3/4" (19mm) throw latch bolt. Deadlocking latch -- Prevents the use of credit cards or similar means to open the latch bolt. Allen-type 1/4-turn dogging lock -- Allows the exit bar to be unlocked for extended periods of time. Includes all hardware for typical installations. Works with standard external door handle/lock devices such as SD-962HL-4A (see below). Heavy-duty steel construction. Stainless-steel spring. SD-962HL-4A SD 962HL 4A Website: www.seco-larm.com Entry-type lock (locks from outside, opens freely from inside). SC4, 6-pin lock. Two keys included. e-mail: sales@seco-larm.com 25 Request-to-Exit Plates Illum. S.P.D.T. SD-7202GC-PEQ 17/8" (48mm) Illum. D.P.S.T. SD-7103GC-PEQ (17 5mm) Green, illuminated, momentary pushbutton. NO/NC contact rated 5A@125~250 VAC. Includes: “PUSH TO EXIT” & “PRESIONE PARA SALIR” button faces. 11/16" 2” Square green, illuminated, momentary pushbutton. NO/NC contact rated 10A@125~250 VAC. Includes: “PUSH TO EXIT” & “PRESIONE PARA SALIR” button faces. 2" (51mm) Access 213/16" (71mm) 13/8" (36mm) 21/8" (54mm) 213/16" (71mm) Illum. Timer S.P.D.T. SD-7103GC-PTQ Green, illuminated, momentary pushbutton. NO/NC contact rated 3A@120VAC/24VDC. Includes: “PUSH TO EXIT” & “PRESIONE PARA SALIR” button faces. Built-in timer (1~180 s). Buzzer output for audio status. (17 5mm) 2” Square green, illuminated, momentary pushbutton. NO/NC contact rated 3A@120VAC/24VDC. Includes: “PUSH TO EXIT” & “PRESIONE PARA SALIR” button faces. Built-in timer (1~180 s). Buzzer output for audio status. 11/16" 2” (51mm) 27/8" (74mm) Illum. Timer S.P.D.T. SD-7202GC-PTQ 25/16" (59mm) 25/16" (59mm) S.P.S.T. NEW SD-7101KBPE1Q 17/16" (37mm) Black momentary pushbutton switch with ring guard. N.C. contact rated 1A@125VAC. “EXIT” and “SALIDA” silk-screened on plate. 17/16" (37mm) S.P.S.T. SD-7201KBQ Black momentary pushbutton switch with ring guard. N.C. contact rated 1A@125VAC. S.P.S.T. SD-7101RAEX1Q 1" (26mm) Red momentary pushbutton switch with ring guard. N.O. contact rated 1A@125VAC. “EXIT” and “SALIDA” silk-screened on plate. 1" (26mm) NEW D.P.S.T. SD-7217GWQ 11/2" (38mm) Green, 1½” dia., mushroom-cap pushbutton. NO/NC contact rated 5A@125VAC. White plastic plate to match décor of certain rooms/walls. 213/16" (71mm) Illum. S.P.D.T. SD-7223GW-LQ 2” Square green, illuminated, momentary pushbutton. NO/NC contact rated 10A@125~250 VAC. Includes: “PUSH TO EXIT” & “PRESIONE PARA SALIR” button faces. White plastic plate to match décor of certain rooms/walls. 2" (51mm) 27/8" (74mm) NEW 21/8" (54mm) 17/8" (48mm) ‧All SECO LARM R T E Plates are available in white as well as without printing (blank). Customized printing is available. Contact SECO LARM for details.‧ 26 1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326 Request-to-Exit Plates S.P.D.T. SD-7201GA-PT1 1½" (38mm) 27/8" (74mm) 25/16" (59mm) 17/8" (47mm) D.P.D.T. SD-7201GF-PE1 Green, 1½ ” dia., mushroom-cap pushbutton. D.P.D.T. switch. Two N.O. and two N.C. contacts rated 5A@125VAC. “EXIT” and “SALIDA” silk-screened on plate. 1½" (38mm) Green, 1½ ” dia., mushroom-cap pushbutton. NO/NC contact rated 5A@125VAC. “EXIT” and “SALIDA” silk-screened on plate. 27/8" (74mm) D.P.S.T. SD-7201RC-PE1 Red, 1½ ” dia., mushroom-cap pushbutton. NO/NC contact rated 5A@125VAC. “EXIT” and “SALIDA” silk-screened on plate. 1½" (38mm) 39/16" (91mm) SD-7201GC-PE1 Access Green, 1½” dia., mushroom-cap pushbutton. NO/NC contact rated 3A@120VAC/24VDC. “EXIT” and “SALIDA” silk-screened on plate. Built-in timer (1~180 sec). Buzzer output for audio status. 1½" (38mm) 35/16" (84mm) D.P.S.T. 2½" (64mm) 17/8" (47mm) 27/8" (74mm) NEW NEW Illum. D.P.S.T. SD-7251GCEX1Q RF Wireless Pushbuttons 11/2" (38mm) Green, 1½” dia., illuminated, mushroom-cap pushbutton. NO/NC contact rated 5A@125VAC. “EXIT” and “SALIDA” silk-screened on plate. For a full line of RF wireless Request-To-Exit pushbuttons, see page 30. 17/8" (47mm) NEW NEW D.P.S.T. Timer SD-7113-GSP D.P.S.T. Timer SD-7173-SSP Green, 1½” dia., mushroom-cap pushbutton. NO/NC contact rated 5A@125VAC. "EXIT" and "SALIDA" silk-screened on plate. Equipped with a pneumatic timer (2~60 sec). D.P.S.T. Timer SD-7213-GSP D.P.S.T. Timer SD-7273-SSP Similar to SD-7113-GSP, but single-gang. Website: www.seco-larm.com Stainless-steel, 1/4” dia. pushbutton. NO/NC contact rated 5A@125VAC. "EXIT" and "SALIDA" silk-screened on plate. Equipped with a pneumatic timer (2~60 seconds). e-mail: sales@seco-larm.com Similar to SD-7173-SSP but single-gang. 27 Wireless RF Request-to-Exit Plates NEW SD-8202GT-PEQ Single-Gang , 2" (51mm) Square Illuminated Pushbutton NEW SD-8103GT-PEQ Slimline, Small Illuminated Pushbutton NEW Access SD-8201GTPE1Q Single-Gang, 1½" (38mm) Diameter, Mushroom-Cap Pushbutton 21/4" (57mm) 31/8" (80mm) 1½" (38mm) 4½" (115mm) 21/8" (54mm) 21/8" (54mm) SD 8201GTPE1Q 4½" (115mm) 2" (51mm) SD 8202GT PEQ 211/16" (68mm) Ideal for hard-to-wire installations such as in cement walls or brick buildings. Built-in RF transmitter: – Powered by 9VDC (battery included). – Operates at 315MHz and up to 50ft (15m). – Over 68 billion (6.8x1010) possible codes. – Compatible with all SECO-LARM receivers. – LED to indicate RF transmission and low battery: Blue: Normal Operation, Red: Low Battery 4½" (115mm) 3/4" (18mm) 21/8" (54mm) SD 8103GT PEQ "No Touch" Request-to-Exit Plates SD-9163-KSVQ Outdoor "No Touch" Slimline Plate with Mechanical Override Button NEW SD-9263-KSVQ Outdoor "No Touch" Single-gang Plate with Mechanical Override Button NEW SD-9163-KSQ Outdoor "No Touch" Slimline Plate NEW SD-9263-KSQ Outdoor "No Touch" Single-gang Plate NEW SD 9163 KSVQ 28 SD 9263 KSVQ SD 9163 KSQ SD 9263 KSQ 1.949.261.2999 (CA & Int’l) SD-9163-KSVQ Outdoor slimline "No-Touch" sensor. Adjustable sensing range and delay time. Mechanical override button. SD-9263-KSVQ – Similar to SD-9163-KSVQ, but single-gang. SD-9163-KSQ – Similar to SD-9163-KSVQ, but without mechanical override button. SD-9263-KSQ – Similar to SD-9263-KSVQ, but without mechanical override button. 1.800.662.0800 Fax: 1.949.261.7326 "No Touch" Request-to-Exit Plates SD-927PKC-NEQ IR "No Touch" RTE Stainless-Steel Plate (English) NEW SD-927PKC-NFQ IR "No Touch" RTE Stainless-Steel Plate (French) NEW SD-927PKC-NSQ IR "No Touch" RTE Stainless-Steel Plate (Spanish) NEW SD-927PWCQ IR "No Touch" RTE Plastic Plate (English, French & Spanish) NEW SD 927PKC NSQ SD 927PKC NFQ Access SECO-LARM's "No Touch" Request-To-Exit Sensors use IR technology to open a door or activate a device with the simple wave of a hand. The trigger distance is up to 4" (10cm). Since they are no touch, these sensors are ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices (anywhere an easy way to exit is required). "No Touch" -- Just wave a hand in front of the sensor. Sensing range up to 4" (100mm). Range is 2" (50mm) for SD-927PWCQ. Selectable LED color, turns from red to green or green to red. Reduces the risk of cross contamination. Easy and clean operation. Reliable IR technology senses motion. Durable, stainless-steel, single-gang plate. Quick-connect screwless terminal block. SPDT 3 Amp relay output. Optional Point-of-Sales Displays -- Display ad available in English or Spanish, which includes a working demonstration sensor. SD 927PKC NEQ SD-927PWCQ incorporates a white plastic faceplate to match the décor of many walls. Six decals included: SD 927PWCQ NO TOUCH EXIT SALIDA SIN TOCAR SORTIE SANS CONTACT Website: www.seco-larm.com (AD DBO SD927E) Specifications (AD DBO SD927S) SD-927PKC-NxQ Operating voltage Relay type Form C dry contact, 3A@12VDC Response time Output time Sensing range Operating temperature Weight Dimensions e-mail: sales@seco-larm.com SD-927PWCQ 12VDC 10ms 0.5s or as long as unit is triggered 4” (100mm) 2” (50mm) 4°~131° F ( 20°~55° C) 3 oz (85g) 41/2”x2 3/4”x11/16” (115x70x27 mm) 29 Request-to-Exit Plates --- Vandal Resistant 1½" (38mm) Access 1½ " (38mm) D.P.S.T. SD-7104SGEX1Q D.P.S.T. SD-7204SGEX1Q Vandal-resistant, ½” dia., stainless-steel pushbutton. NO/NC contact rated 5A@250VAC. “EXIT” and “SALIDA” silk-screened on plate. Vandal-resistant, ½” dia., stainless-steel pushbutton. NO/NC contact rated 5A@250VAC. “EXIT” and “SALIDA” silk-screened on plate. 11/4" (32mm) 11/4" (32mm) 1½" (38mm) 1½" (38mm) Illum. D.P.S.T. SD-7175SGEX1Q Illum. D.P.S.T. SD-7275SGEX1Q Vandal-resistant, ½” dia., illuminated momentary pushbutton. 2-Color illuminated red/green LED (12VDC). NO/NC contact rated 5A@250VAC. “EXIT” and “SALIDA” silk-screened on plate. Vandal-resistant, ½” dia., illuminated momentary pushbutton. 2-Color illuminated red/green LED (12VDC). NO/NC contact rated 5A@250VAC. “EXIT” and “SALIDA” silk-screened on plate. 11/4" (32mm) 11/4" (32mm) Request-to-Exit Key Switch Plates SD-72051-V0 Momentary (N.C., turn to open, pre-wired) Switch, Single Gang SD-71051-V0 Momentary (N.C., turn to open, pre-wired) Switch, Slimline SD-72002-V0 Shunt (N.C., turn to open, pre-wired) Switch, Single Gang SD-71002-V0 Shunt (N.C., turn to open, pre-wired) Switch, Slimline Keylock Switch Types: Maintained ON Momentary OFF SD-72051-V0 Momentary Switch, Single-Gang Plate ON (N C ) 60 ° SD-71051-V0 3 0° Momentary Switch, Slimline Plate Stainless-steel plate. Includes shunt ON, momentary OFF (N.C., turn to open, pre-wired) spring-loaded keylock switch. Switch is maintained ON, springs back from OFF. Key is removable from the ON position only. Single Gang SD-72051-V0 SD-72002-V0 Slimline SD-71051-V0 SD-71002-V0 OFF (N O ) SD 72051 V0 SD 71051 V0 Maintained ON Shunt OFF SD-72002-V0 Shunt Switch, Single-Gang Plate ON (N C ) 60 ° SD-71002-V0 3 0° Shunt Switch, Slimline Plate Specifications 30 Contact Rating 1A@12VDC Replacement Keys SS 090KN 0 Stainless-steel plate. Includes maintained ON/OFF, (N.C., turn to open, pre-wired) keylock switch. Switch can be left ON or OFF. Key is removable from the ON or OFF position. 1.949.261.2999 (CA & Int’l) 1.800.662.0800 Springs Back OFF (N O ) SD 72002 V0 SD 71002 V0 Fax: 1.949.261.7326 Tubular Key Lock Switches SS-090 SS-095 Shunt On/Off Two Terminals, SPST Momentary On/Shunt Off Two Terminals, SPST OFF (N O ) 60 ° 30° ON (N C ) SS-090-1 SS-092-2 Shunt On/Off Two Terminals, SPST Shunt On/Off, Off/On Four Terminals, Dual SPST OFF (N O ) 60 ° 15° OFF (N O ) 15° 30° ON (N C ) ON (N C ) ° Two switches, one always ON while the other is OFF. Connect terminals 1 & 2 for SPDT contact. Use to arm/disarm car alarms and break starter circuit. Replacement keys available. See chart below. OFF (N O ) 60 ° 60 Maintained ON/OFF, key removable from OFF position only. Commonly used in situations which require return of key to ensure device is turned OFF. Replacement keys available. See chart below. Access Maintained OFF, springs back from ON, key removable from OFF position only. Commonly used for momentary arm/disarm alarm inputs or other applications requiring high-security momentary ON. Replacement keys available. See chart below. 30° Maintained ON/OFF, key removable from both ON and OFF positions. Commonly used as ON/OFF switch to arm/ disarm alarm or shunt zone. Replacement keys available. See chart below. ON (N C ) Note: Please specify key number when ordering. Please see below. Keylock Model Number Chart (Only below key #'s are available) SS-090 SS 090 2H0 SS 090 2H1 SS 090 2H2 SS 090 2H3 SS 090 2H4 SS 090 2H5 SS 090 2H6 SS 090 2H7 SS 090 2H8 SS 090 2H9 SS 090 2HX SS-095 SS 095 1H0 SS 095 1H1 SS 095 1H2 SS 095 1H3 SS 095 1H4 SS 095 1H5 SS 095 1H6 SS 095 1H7 SS 095 1H8 SS 095 1H9 SS 095 1HX SS-090-1 SS 090 1H0 SS 090 1H1 SS-092-2 SS 092 2H0 SS-090KN SS 090KN 0 SS 090KN 1 SS 090KN 2 SS 090KN 3 SS 090KN 4 SS 090KN 5 SS 090KN 6 SS 090KN 7 SS 090KN 8 SS 090KN 9 SS 090KN X Key # 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 SS-090KN Spare Keys Replacement keys for the above tubular key lock switches. Eleven different key numbers available (1300-1310). See chart for information on which key numbers are available for each key lock and the correct key lock part number for ordering. Remote Plates SS-199 SS-299 Stainless-steel slimline plate with 3/4” D-hole. Stainless-steel single-gang plate with 3/4” D-hole. Website: www.seco-larm.com e-mail: sales@seco-larm.com 31 Access Control Power Supply One Output, 5A@12VDC (4.5A@24VDC) Access EAP-5D1Q (Batteries not included) Dimensions: 12 / 7 "x123/16"x39/16" (316x310x90 mm) Power Supply Board NEW Same access control power supply board as is used in EAP-5D1Q above. Dimensions: 7"x43/4"x13/4" (178x120x44 mm). Sample Application: AC input fuse Features : AC power-failure supervision relay. Battery-failure supervision relay. Selectable 2.2 kOhm End-of-Line (EOL) resistor for AC-failure and battery-failure supervision relays. Selectable delay timer (5 seconds, 5 minutes, 5 hours) for AC-failure supervision relay. LED overload indicator and automatic shutdown for short-circuit protection. Over-current fuse-protected AC input. Built-in backup battery charger. Automatically switch to backup battery if AC fails. Individual AC input and DC output LED status indicators. 16 Accessory: EAP-5D1MQ AC input LED status indicator DIP switch for 12 or 24 VDC output selection Power: Field-selectable 12 or 24 VDC output. Operating voltage input: 110~240 VAC. Adjustable output voltage range (11~15 VDC, 23~26 VDC) to compensate for voltage drops. Supply current: 5A@12VDC, 4.5A@24VDC. AC input fuse rating 3.15 Amp (glass fuse). DC output overload sensing with red LED indicator and automatic shutdown during short circuit. Enclosure: Heavy-duty steel case to protect the power connections. Removable steel cover for easy access. Ventilation holes to prevent heat buildup. Enclosure has enough room for two 7AH batteries. 6ft (1.8m) Power cord and battery leads included. Dimensions: 127/16”x123/16”x39/16” (316x310x90 mm). Knockout on the cover for optional cam lock. 110~240 VAC Input VR1 rotary knob for DC output voltage range adjustment Battery failure & low battery Supervision Relay Output to Audio/Visual warning device AC failure delay timer DIP switch Power Supply End-of Line (EOL) 2.2 kOhm resistor DIP switch Power Supply AC failure Supervision Relay Output to DC output LED Audio/Visual status indicator warning device Back-up battery terminal 32 + 12 VDC Battery (Optional) NEW Battery presence and low battery monitor DIP switch DC output terminal block 1.949.261.2999 (CA & Int’l) Specifications Output voltage 12 or 24 VDC selectable via DIP switch Input voltage 110~240 VAC Adjustable output voltage range # of outputs Supply current AC input fuse rating LED status indicator End-of-line resistor (EOL) AC-failure relay delay timer Supervision relays 1.800.662.0800 11~15@12VDC setting, via VR switch 23~26@24VDC setting, via VR switch 1 5A@12VDC/4.5A@24VDC 3.15A (glass fuse) AC input (Green), DC output (Red) Selectable ON (2.2 kΩ) or OFF via DIP switch Selectable 5s, 5min or 5h via DIP switch Contact rating: 3A@24VDC dry relay output Fax: 1.949.261.7326 Video Door Phone DP-121Q Includes One Monitor and One Camera, Black and White NEW DP-121-SQ Additional Monitor NEW DP-121-CQ Additional Camera NEW Access SECO-LARM's Video Door Phone displays an image of the visitor in real time on the phone's monitor, and a built-in microphone and speaker on the camera unit lets users communicate with visitors. Authorized visitors can then be granted entry with the push of a single button. Interconnect up to two cameras and two monitors. For home or business use. Camera has six LEDs for nighttime operation. Remotely and securely talk to visitors. Remotely unlock doors, gates, etc. from the monitor. Simple four-wire connection. Easy surface-mount installation. Camera and monitor turn on and off with the push of a button. Camera and monitor turn off automatically when not in use. Adjustable contrast, brightness, and ringer volume. LED indicators for power and operation. Camera contains a built-in angle adjustment. Easily connect an additional monitor and/or an additional camera Secondary Monitor: DP-121-SQ Additional Camera: DP-121-CQ Sample Application: Primary Monitor Secondary Monitor (Optional DP-121-SQ) Specification: Camera Type B/W Camera Chip Resolution Relay output Lens Min. illumination Weight Dimensions Specification: Locking Device (not included) Camera 2 (Optional DP-121-CQ) Locking Device (not included) Website: www.seco-larm.com 1A@12VDC max. dry contact 3.6mm 0.8 lux 8 oz (220g) 51/4"x315/16"x11/2" (134x100x38 mm) Monitor Display CRT Weight 2 lb 8 oz (1.1kg) Current draw Camera 1 CCD 380 TV lines 800mA@15~18 VDC Power source 15VDC+/ 15% Dimensions 95/8"x711/16"x31/8" (245x196x79 mm) e-mail: sales@seco-larm.com 33 Stand-Alone Proximity Reader PR-112S-A Tri-color LED Status Bar, Weatherproof, 100-User Capability NEW Proximity Card Reader Proximity Card (10 cards included) Accessories: PR-K1S1-A Proximity Cards Additional user cards. Sold in packages of 10. PR-K1K1-AQ Key-Fob Proximity Tags Access The stylish case and small size make the PR-112S-A ideal for use in offices, homes, and apartments. The wave-shaped tri-color LED status bar accents the case design. Simple installation, quick programming, and high reliability make the PR-1125-A ideal for any situation. Sealed and weatherproof (IP67). Tri-color wave-shaped LED status bar indicates proximity reader's mode and status: • Blue On/Valid Card Indicator • Green Programming Mode • Red Invalid Card Output relay for either timed (1 to 180 seconds) or "Toggle" mode. Egress input for exiting the protected premises. Buzzer for audible confirmation (programmable). Up to 100 user cards can be programmed. User cards easily deleted. Delete a single card, or all cards. Up to five "Master" cards can be programmed. 10 Cards included. Additional cards available in standard (model # PR-K1S1-A) or key-fob (model # PR-K1K1-AQ) size. Additional user cards, key-fob style. Sold in packages of 10. Specifications Operating voltage Dimensions: 5 /8” Front Back (Mounting Plate) (16mm) 33/4” (95mm) 19/16” (40mm) (21mm) / ” 11 16 / ” (17mm) 11 16 13/16” / ” (21mm) (21mm) 13 16 Website: www.seco-larm.com Active: 200mA@12VDC 6" (15cm) User card limit 100 Cards Master card limit 5 Cards Transmit frequency 125 kHz Contact rating 1 Relay (NO/NC/COM) 1A@30V Relay time delay 1~180 s or Toggle mode Operating temp. 4°~158° F ( 20°~70° C) Enclosure rating 3 12VDC Standby: 80mA@12VDC Max. read distance Output / ” 13 16 (17mm) 1 /4” (44mm) Current draw PR-112S-A Dimensions e-mail: sales@seco-larm.com IP67 33/4"x13/4"x11/16" (95x44x17 mm) 35 Digital Access Keypads SK-1011-SQ One Output, 100 Users SK-1131-SQ Three Outputs, 120 Users, Backlit Keypad Access Shared Features: SK-1011-SQ SK-1131-SQ Dimensions: 13/8" (34mm) 2 7 /8 " (73mm) 4 5 /8 " (117mm) 1 3 /4 " (44mm) Model Comparison Chart: Door unlocked announcer Request to exit input Main relay lockout Tamper switch Silent operation Operating voltage Number of outputs Number of users Backlit keypad Mantrap Door forced open warning Door propped open warning Key activation output Door auto relock Alarm output Duress output LED connections SK-1011-SQ SK-1131-SQ Yes Yes Yes Yes Yes 12~24 VAC/VDC 1 100 No No No No No No No No Fixed internal Yes Yes Yes Yes Yes 12~24 VAC/VDC 3 120 Yes Yes Yes Yes Yes Yes Yes Yes External connection* Ideal for access and security applications. Code lockout after multiple failed code entries. Stainless-steel face, durable and attractive. Built-in buzzer for audible confirmation. Form C relay output (5A@28VDC). Output relay activation buzzer. Relay output inhibit control (programmable) – Locks the relay output to prevent user access. Auto or manual code-entry checking. Egress input -- Lets users exit the protected premises without keying in the code. Built-in tamper (N.C.) circuit. EEPROM memory -- Prevents data loss. Power -- 12~24 VAC/VDC, no need to change jumpers. Additional Features for SK-1131-SQ: Three outputs: Two relays, one transistor. Backlit keypad: For easy daytime and nighttime use. Mantrap: Ensures only one door can be opened at a time. Duress output after multiple failed code entries. Door-forced-open warning: Keypad beeps continuously if the door to the protected premises is forced open. Door-propped-open warning: Beeps continuously if the door is open after the programmed open time elapses. Alarm output: Can trigger an optional alarm control panel if a protected door is forced open or propped open. Keypad active output: Activates for 10 seconds when any key on the keypad is pressed. Door auto relock: Can relock an open door when the relock time expires or after the door is closed. Specifications: SK-1011-SQ Operating voltage 12~24 VDC/VAC 10mA@12VDC 10mA@12VDC 30mA@12VDC 30mA@12VDC 130mA@12VDC (2 relays active) 80mA@12VDC 5A@30VDC 5A@28VDC 1A@28VDC N/A N/A 100mA@24VDC N.O. ground N.C. ground 6 oz (180g) 7 oz (200g) Current draw Standby Key pressed Relay output Relay #1 Relay #2 Transistor ground output Egress Door sensor input Weight Relay output * LEDs can be wired to show status of external devices such as an alarm control panel. 36 1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326 SK-1131-SQ Outdoor Digital Access Keypads NEW SK-1123-SQ 110 Users, Two Relays, Surface Mount SK-1123-FQ 110 Users, One Relay, One Transistor Ground O/P, Flush Mount SK-1123-FQ Dimensions: 31/8" (78mm) 415/16" (125mm) 7 8 2" (51mm) 9 31/4" (82mm) 4 5/ 8 " (118mm) Each relay can be programmed for momentary (1~999 seconds) or toggle operation. Code flexibility: Each code can be 4~8 digits long. Egress input for exiting the premises. Dual voltage: 12~24 VAC/VDC operation. Tamper switch: N.C. Dry contact 3A@12VDC. Mantrap: For a protected area with two doors, this feature allows only one door to be open at any time. All features are programmed directly from the keypad, eliminating the need for an external programmer. Duress output: Signals a silent alarm if an authorized user is forced to open the door under duress. Door-forced-open and door-propped-open alarm output. Keypad can be programmed to emit beeps for key presses or operate in silent mode. Programmable backlight: Always ON, ON when keys are pressed, Always OFF; suitable for solar applications. Auto or manual code-entry checking: – Auto: No # key required after each code. – Manual: # Key must be pressed after every code. Anti-Tailgate: Auto-relock to prevent tailgating. Access SK-1123-SQ NEW 113/16" (45mm) Model Comparison Chart: Number of users Number of outputs Number of relays Backlit keys Tamper switch Door unlocked annunciation Request to exit input Main relay lockout (inhibit) Mantrap Door forced open warning Door propped open warning Door auto relock Alarm/duress output Key activation output Type of mounting SK-1123-SQ SK-1123-FQ 110 2 2 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Surface 110 2 1 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Flush Website: www.seco-larm.com Specifications: SK-1123-SQ Operating voltage Current draw SK-1123-FQ 12~24 VDC/VAC Standby Key pressed Relay output Relay #1 Relay #2 Transistor ground output Egress Door sensor input Weight Relay output e-mail: sales@seco-larm.com 15mA@12VDC 45mA@12VDC 130mA@12VDC (2 relays) 5A@28VDC 1A@28VDC N/A N.O. ground N.C. ground 22 oz (630g) 10mA@12VDC 45mA@12VDC 100mA@12VDC 5A@30VDC N/A 100mA@24VDC 15 oz (430g) 37 Vandal-Resistant Outdoor Keypad SK-3123-SQ 101 Users, Two Outputs, Rugged Stainless-Steel, Illuminated NEW Access The ENFORCER SK-3123-SQ is rugged, vandal resistant, and weatherproof, making it ideal for outdoor applications. The keypad can be programmed to operate a fail-safe or fail-secure locking device. Over 100 million possible code combinations. Code flexibility: Each code can be 2~8 digits long. Dual voltage: 12~24 VDC/VAC operation. Two Form C relays, each rated at 5A@24VDC. Keypad active outputs. Individual keys are backlit and entire keypad is illuminated for easy nighttime use. All features are programmed directly from the keypad: No need for an external programmer. Keypad can be programmed to emit beeps for key presses or operate in silent mode. EEPROM memory protects programmed information in case of power loss. Tamper switch: N.C. dry contact 3A@12VDC. Egress input for exiting the protected premises. Rugged stainless-steel construction. Individual keys are backlit. Entire keypad illuminated for easy nighttime use. Unique faceplate hinge allows for easy installation. Dimensions: Specifications Current draw 6 3/8 ” (162mm) 5 1/4 ” (133mm) 38 4 3/8 ” (111mm) Standby Keys lit Relay active Number of outputs Relay output Additional outputs Egress Inhibit input Dimensions Weight 1.949.261.2999 (CA & Int’l) 1.800.662.0800 SK-3123-SQ 30mA@12VDC 75mA@12VDC 125mA@12VDC 2 5A@24VDC, Form C, NO/NC/COM Keypad active N.O. ground N.O. ground 6 3/8 ”x5 1/4 ”x4 3/8 ” (162x133x111 mm) 4 Ib 7 oz (2.1kg) Fax: 1.949.261.7326 Mullion-Style Weatherproof Stand-Alone Keypads SK-2323-SDQ 1,010 Users, Two Relay Outputs, Illuminated NEW SK-2323-SPQ 1,010 Users, Two Relay Outputs, Illuminated, Built-in Proximity Reader NEW Access ENFORCER Mullion-Style Weatherproof Stand-Alone Keypads are rugged, vandal resistant, and weatherproof, making them ideal for outdoor applications. The SK-2323-SPQ also comes equipped with a built-in proximity reader, allowing it to read proximity cards. 12~15 VDC operation. Two relay outputs. Backlit keys for easy nighttime use. All features are programmed directly from the keypad – No need for an external programmer. Rugged aluminum construction. Weatherproof for outdoor use. Dimensions: 6”x13/4”x1” (152x44x24 mm). Additional user cards also available, model # PR-K1S1-A or PR-K1K1-AQ. See page 35. SK 2323 SPQ Shown Sealed-Housing Stand-Alone Keypads SK-1323-SDQ 1,010 Users, Two Relay Outputs, Illuminated NEW SK-1323-SPQ 1,010 Users, Two Relay Outputs, Illuminated, Built-in Proximity Reader NEW ENFORCER Sealed-Housing Stand-Alone Keypads are contained in a sealed metal housing, making them suitable for hazardous environments. The SK-1323-SPQ also comes equipped with a built-in proximity reader, allowing it to read proximity cards. 12~15 VDC operation. Two relay outputs. Backlit keys for easy nighttime use. All features are programmed directly from the keypad – No need for an external programmer. Rugged stainless-steel construction. Weatherproof for outdoor use. Dimensions: 43/4”x3”x7/8” (120x76x22 mm). SK 1323 SPQ Shown Website: www.seco-larm.com Additional user cards also available, model # PR-K1S1-A or PR-K1K1-AQ. See page 35. e-mail: sales@seco-larm.com 39
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2010:11:19 09:22:14-08:00 Creator : CorelDRAW Modify Date : 2010:11:19 09:22:14-08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2010:11:19 09:22:14-08:00 Creator Tool : CorelDRAW Format : application/pdf Document ID : uuid:4da4fb6d-c187-4cd6-8f5e-e2c32a8210de Instance ID : uuid:15e3ff5c-110f-4343-ae75-631a2f2c2484 Producer : Corel PDF Engine Version 3.0.0.739 Page Count : 15EXIF Metadata provided by EXIF.tools