Select Hinges Catalog With 030816 Updates SL305 Spec Sheet SL305Spec Web

User Manual: Select Hinges SL305 Spec Sheet Specs

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadSelect Hinges Catalog With 030816 Updates SL305 Spec Sheet SL305Spec Sheet-web
Open PDF In BrowserView PDF
SPECIFICATIONS

SL305 Concealed Pin & Barrel Hinge

MATERIAL: 14 gauge 304 stainless steel with
3/16" diameter 304 stainless pin. Long-life nylon
medical bearings.
1/32"

LENGTHS: 79", 83", 85", 95" and 119" lengths standard
for nominal door heights. Custom lengths are
available.

3/8"

1-7/8"

1-3/4"

LOAD/FREQUENCY: For 1-3/4" doors, 48" wide (max.),
weighing up to 400 pounds (medium-frequency)
without frame or door reinforcement; up to 600
pounds (low-frequency) without frame or door
reinforcement.

2-1/4"

5/16" clearance (min.)

1/16" min.

FINISH: US32D satin stainless steel (630).

DOOR CLOSED

CLOSERS: Conventional overhead surface, concealed
sliding arm overhead or floor closers may be used
with SELECT hinges. Pivot-type floor closers (with
a fixed, conflicting center pivot) must be replaced.
ORDER: Specify hinge length. Screw pack contains
10-24 x 7/8" 410SS Phillips flathead undercut selfdrilling Tek® screws and 10 x 1-1/4" 410SS Phillips
flathead undercut sheet metal screws. AdjustaScrew™ fasteners available at extra cost.
AVAILABLE ELECTRIC PREPS: CTP-AR, CTP-VD, EL,
AMS and ETAP.
BHMA CERTIFICATION: SL305 pin & barrel continuous
hinges conform to BHMA Standard
ANSI/BHMA A156.26-2006 Grade 1.

DOOR OPEN 90˚

2-1/4"

3/4"

© 2015 SELECT Products Limited

SL305 HINGE SCREW COUNT
HINGE LENGTH

DOOR
SCREWS

FRAME
SCREWS

79"

18

18

83"

21

21

85"

18

18

95"

23

23

119"

27

27

DOOR OPEN 180˚

Printed in U.S.A.

#SP-072015

Information subject to
change without notice.

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com

SPECIFICATIONS

SL305 Concealed Pin & Barrel Hinge

SELECT Hinge Performance

SELECT Advantages

Q

SELECT pin & barrel continuous hinges
are built to handle abuse from high-traffic
applications. They are applied to the surface
on the edge of the frame and door. No
machining or reinforcement is required.

Q

On conventional hinges, opening and “kickback” energy concentrate on a few inches
of fastened reinforcing plate — with the top
hinge handling 100% of the force. Pinless
SELECT hinges bond the door and frame
into an integrated, sag-free unit. “Kick-back”
energy dissipates along the entire length
of the door and frame. (Compare this to a
conventional hinge’s 4-1/2" to 5" at the top
of the door and frame).

Q

SELECT pin & barrel continuous hinges
eliminate the gap between the door and
frame, providing a weatherproof, rust-proof,
tamper-proof barrier.

Q

SELECT pin & barrel continuous
hinges (excluding Toilet Partition
hinges) are listed and tested by
Underwriters Laboratories to meet
the Positive pressure requirements of
UL10C, and are in accordance with UBC
7.2 (1997). SELECT pin & barrel continuous
hinges (excluding Toilet Partition hinges)
are for use on swinging single fire doors
(max. door opening of 4'x10') or pairs of
fire doors (max. door opening of 8' x10'),
including double egress, installed in masonry
or drywall. SELECT pin & barrel continuous
hinges (excluding Toilet Partition hinges) are
rated for 20 minutes on labeled wood doors,
1-1/2 hours for labeled hollow metal and
composite-core wood fire doors, and 3 hours
(NO FIRE PINS OR STUDS REQUIRED)
for labeled hollow metal doors mounted
singly only.

CORROSION-RESISTANT
STAINLESS STEEL
Stainless steel pin & barrel design
creates a tough, highly secure opening.

TEMPLATED HOLE PATTERN
SELECT hinges line up perfectly,
precisely, every time. Makes
installation easier and faster.

DUST-FREE (MEDICAL) BEARINGS
Prevent metal-to-metal contact and
eliminate dust. Exclusive standard (no
upcharge) on all SELECT Pin & Barrel hinges.

VARIETY OF FINISHES
Available in polished, brushed and
painted finishes to match, contrast or
accent your building’s design.

3-HR. FIRE RATING
Fire-rated out of the package.
No extra parts to buy or install.
No liability worries.

STAINLESS STEEL PIN
Delivers high tensile strength by forming
a strong, free-moving unit. Flexible and
strong in abused openings.

ADJUSTA-SCREW™ FASTENERS
Remedy out-of-square doors and fames
easily. Correct fit variances up to 3/8"
along full length of door.

END CAPS
Spiral-knurled steel caps seal the
barrel ends to contain hinge pin.

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com

Information subject to
change without notice.

© 2015 SELECT Products Limited

Printed in U.S.A.

#SP-072015
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2016:03:29 16:27:47
Modify Date                     : 2016:03:29 16:27:47
Title                           : Catalog with 030816 Updates.pdf
Creator                         : Adobe Acrobat 11.0.3
Author                          : kimberlyp
EXIF Metadata provided by EXIF.tools

Navigation menu