Select Hinges Catalog With 030816 Updates SL305 Spec Sheet SL305Spec Web

User Manual: Select Hinges SL305 Spec Sheet Specs

Open the PDF directly: View PDF .
Page Count: 2

SPECIFICATIONS

SL305 Concealed Pin & Barrel Hinge

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com

© 2015 SELECT Products Limited Printed in U.S.A. #SP-072015 Information subject to

change without notice.

5/16" clearance (min.)

3/8"

1/32"

1/16" min.

2-1/4"

1-3/4"

1-7/8"

2-1/4"

3/4"

DOOR OPEN 90˚

DOOR CLOSED

DOOR OPEN 180˚

MATERIAL: 14 gauge 304 stainless steel with

3/16" diameter 304 stainless pin. Long-life nylon

medical bearings.

LENGTHS: 79", 83", 85", 95" and 119" lengths standard

for nominal door heights. Custom lengths are

available.

LOAD/FREQUENCY: For 1-3/4" doors, 48" wide (max.),

weighing up to 400 pounds (medium-frequency)

without frame or door reinforcement; up to 600

pounds (low-frequency) without frame or door

reinforcement.

FINISH: US32D satin stainless steel (630).

CLOSERS: Conventional overhead surface, concealed

sliding arm overhead or floor closers may be used

with SELECT hinges. Pivot-type floor closers (with

a fixed, conflicting center pivot) must be replaced.

ORDER: Specify hinge length. Screw pack contains

10-24 x 7/8" 410SS Phillips flathead undercut self-

drilling Tek® screws and 10 x 1-1/4" 410SS Phillips

flathead undercut sheet metal screws. Adjusta-

Screw™ fasteners available at extra cost.

AVAILABLE ELECTRIC PREPS: CTP-AR, CTP-VD, EL,

AMS and ETAP.

BHMA CERTIFICATION: SL305 pin & barrel continuous

hinges conform to BHMA Standard

ANSI/BHMA A156.26-2006 Grade 1.

SL305 HINGE SCREW COUNT

HINGE LENGTH DOOR

SCREWS

FRAME

SCREWS

79" 18 18

83" 21 21

85" 18 18

95" 23 23

119" 27 27

SPECIFICATIONS

SL305 Concealed Pin & Barrel Hinge

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com © 2015 SELECT Products Limited Printed in U.S.A. #SP-072015

Information subject to

change without notice.

SELECT Advantages

CORROSION-RESISTANT

STAINLESS STEEL

Stainless steel pin & barrel design

creates a tough, highly secure opening.

TEMPLATED HOLE PATTERN

SELECT hinges line up perfectly,

precisely, every time. Makes

installation easier and faster.

DUST-FREE (MEDICAL) BEARINGS

Prevent metal-to-metal contact and

eliminate dust. Exclusive standard (no

upcharge) on all SELECT Pin & Barrel hinges.

VARIETY OF FINISHES

Available in polished, brushed and

painted finishes to match, contrast or

accent your building’s design.

3-HR. FIRE RATING

Fire-rated out of the package.

No extra parts to buy or install.

No liability worries.

STAINLESS STEEL PIN

Delivers high tensile strength by forming

a strong, free-moving unit. Flexible and

strong in abused openings.

ADJUSTA-SCREW™ FASTENERS

Remedy out-of-square doors and fames

easily. Correct fit variances up to 3/8"

along full length of door.

END CAPS

Spiral-knurled steel caps seal the

barrel ends to contain hinge pin.

SELECT Hinge Performance

QSELECT pin & barrel continuous hinges

are built to handle abuse from high-trac

applications. They are applied to the surface

on the edge of the frame and door. No

machining or reinforcement is required.

QOn conventional hinges, opening and “kick-

back” energy concentrate on a few inches

of fastened reinforcing plate — with the top

hinge handling 100% of the force. Pinless

SELECT hinges bond the door and frame

into an integrated, sag-free unit. “Kick-back”

energy dissipates along the entire length

of the door and frame. (Compare this to a

conventional hinge’s 4-1/2" to 5" at the top

of the door and frame).

QSELECT pin & barrel continuous hinges

eliminate the gap between the door and

frame, providing a weatherproof, rust-proof,

tamper-proof barrier.

QSELECT pin & barrel continuous

hinges (excluding Toilet Partition

hinges) are listed and tested by

Underwriters Laboratories to meet

the Positive pressure requirements of

UL10C, and are in accordance with UBC

7.2 (1997). SELECT pin & barrel continuous

hinges (excluding Toilet Partition hinges)

are for use on swinging single fire doors

(max. door opening of 4'x10') or pairs of

fire doors (max. door opening of 8' x10'),

including double egress, installed in masonry

or drywall. SELECT pin & barrel continuous

hinges (excluding Toilet Partition hinges) are

rated for 20 minutes on labeled wood doors,

1-1/2 hours for labeled hollow metal and

composite-core wood fire doors, and 3 hours

(NO FIRE PINS OR STUDS REQUIRED)

for labeled hollow metal doors mounted

singly only.