Senao Networks CAP7250AG Access Point User Manual

Senao Networks, Inc. Access Point

a href="https://usermanual.wiki/Senao-Networks" itemprop="url"> Senao Networks >

user manual

 Quick Installation Guide CAP7250AG/CAP7252AG/CAP7253AG Wireless-AC+ABGN Long Range Ceiling Mount Dual Concurrent AP Please verify contents of the box before continuing to set up the CAP7250AG/CAP7252AG/CAP7253AG.  CAP7250AG/CAP7252AG/CAP7253AG Access Point  12V/2A 100V~240V Power Adaptor  Mounting Bracket  Wall/Ceiling Mounting Hardware Kit  T-Rail Mounting Hardware Kit *CAP7250AGis3x3concurrent3x3MIMOaccesspoint*CAP7252AGis2x2MIMOinternalANTaccesspoint*CAP7253AGis2x2MIMOexternalANTaccesspointConnecting the CAP7250AG/CAP7252AG/CAP7253AG 1) Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more information, verify with User Manual. 2) Connect one end of the Category 5e Ethernet cable into RJ-45 port of the CAP7250AG/CAP7252AG/CAP7253AG and the other end to the RJ-45 port on the computer that will use the CAP7250AG/CAP7252AG/CAP7253AG. Ensure that the cable is securely connected to both the CAP7250AG/CAP7252AG/CAP7253AG and the Computer. 3) Connect the Power DC Inlet to the DC-IN port of the CAP7250AG/CAP7252AG/CAP7253AG and the Power to the electrical out. Note: CAP7250AG/CAP7252AG/CAP7253AG supports both IEEE 802.3at PoE(Power over Ethernet) and regular power adapter. You should use either one as the power source. Please do not apply both at the same time.
IP address configuration 1) After ensuring the EnGenius device is powered on and plugged in, ensure that your computer is on. 2) For the next steps, refer to your Operating System User Manual. 3) Once your computer is on, ensure that your TCP/IP is set to On or Enabled. (In the control panel, double click Network Connections and then double click on the connection of your Network Interface Card (NIC). Select Internet Protocol (TCP/IP) and then click on the Properties button.) 4) If your PC is already on a computer network, ensure that you have set it to a Static IP Address on the interface (or Ethernet card that will use the CAP7250AG/CAP7252AG/CAP7253AG) as 192.168.1.21 and the Subnet Mask address as 255.255.255.0. (Select Use the following IP Address radio button). Once the computer has been prepared, proceed to setting up the CAP7250AG/CAP7252AG/CAP7253AG. CAP7250AG/CAP7252AG/CAP7253AG Setup 1) To configure CAP7250AG/CAP7252AG/CAP7253AG, open a web browser (example: Microsoft Internet Explorer, Mozilla Firefox, Google Chrome, etc.). 2) In the address bar of the web browser, enter 192.168.1.2 (the default IP address of the CAP7250AG/CAP7252AG/CAP7253AG) and hit enter. 3) A login screen will appear. By default, the username of the CAP7250AG/CAP7252AG/CAP7253AG is admin and the password is admin. Enter the current username and password of the CAP7250AG/CAP7252AG/CAP7253AG and then click Login. Refer to the CAP7250AG/CAP7252AG/CAP7253AG user manual on how to change the username and password. 4) After clicking Login with the correct username and password, the CAP7250AG/CAP7252AG/CAP7253AG Main Menu will appear. If you are successful, proceed to setting up the wireless connection. http://192.168.1.2
Download:
Mirror Download [FCC.gov]
Document ID2393089
Application IDDrRiSsW4/HROZnmm34RH9Q==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize45.66kB (570795 bits)
Date Submitted2014-09-18 00:00:00
Date Available2014-09-18 00:00:00
Creation Date2014-07-31 11:17:25
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2014-09-18 11:01:02
Document TitleMicrosoft Word - CAP7253AG_CAP7252AG_CAP7253AG QIG_20140730
Document CreatorPScript5.dll Version 5.2.2
Document Author: jessie
FCC ID Filing: U2M-CAP7250AG

Navigation menu