Senao Networks PI360701 802.11 b/g High Power WLAN PCI Adaptor User Manual

Senao Networks, Inc. 802.11 b/g High Power WLAN PCI Adaptor User s manual

a href="https://usermanual.wiki/Senao-Networks" itemprop="url"> Senao Networks >

Manual

IEEE 802.11b/g Wireless PCI Card User’s Manual V1.0
FCC STATEMENT This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ¾ Reorient or relocate the receiving antenna. ¾ Increase the separation between the equipment and receiver. ¾ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ¾ Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. ”To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter”. CE Declaration of Conformity For the following equipment: Wireless Adapter Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards:
Download:
Mirror Download [FCC.gov]
Document ID915301
Application IDGSOkvRUIxsVDVMeYxjMUMA==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize55.69kB (696176 bits)
Date Submitted2008-03-17 00:00:00
Date Available2008-03-17 00:00:00
Creation Date2008-03-12 14:11:02
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2008-03-12 16:52:04
Document TitleMicrosoft Word - User's manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: 100132
FCC ID Filing: U2M-PI360701

Navigation menu