SENTRY SPBT10 Bluetooth Speaker User Manual

Sentry Industries limited Bluetooth Speaker

User Manual

Model: INSTRUCTIONS FOR USER AND CAREPRODUCT FEATURE·Bluetooth speaker supports MP3 playback from USB flash and micro SD card, Bluetooth stereo playback and Bluetooth answer phone function. Effective playingdistance of max 10meters·Bluetooth Edition: Bluetooth V4.1 ·Support: media device with Bluetooth 4.1 function ·FM radio function with support automatic search bands ·Rechargeable Lithium battery:3.7V 1200mAh·Power Rating: max 5Wx2·Maximum output power 5Wx2 ·Frequency response:100Hz-20KHz·Charging time: 2.5-3.5 hours·Talk time: up to 3 hours·Music playtime: 2 hours·Stand by time: up to 10 hours· PACKAGE CONTENTS·Bluetooth speaker x 1· Charge cable with Micro USB to USB A x 1· User Manual X 1 BASIC FUNCTIONPress the button Pick up / Hang up KEY to skip to the previous track, press and hold the button fordecreasing the volume.2) ： toanswer phone 3)  on to “ON”/ “OFF”.4) MODE  Long press to switch through each mode. Mode Sequence is Bluetooth/FM/Radio/TF/USB 5)  skip to the next track, press and hold the button on to increase the volume6) USB slots：support MP3 format.7) TF card support MP3 format.8)9)Charging Use USB DC5V cable included to charge the speaker .Press play to play and pause musicADVANCED FUNCTIONSBluetooth Connection and PairingPress the Power key.(located on the side of the unit) The speaker’s blue BT indicator will flash.Search for “ SPBT10 ” on your cellphone or media device and select SPBT10 once found. The indicator will stop flashing after the speaker has successfully connected to the media device. Phone function1. Answer the phone: Short press the “answer” button to answer incoming Calls.2. Hang up the phone: Short press the “answer” button to hang up the connected call.3. Maximum effective distance of built-in mic: 20cm or 0.65 feet. FM Radio function1.2.Turn on the Bluetooth speaker, then press “MODE” button to switch to Radio mode. Channel Search: Short press the “Play/Pause” (button 5) for at least 3 seconds to activate automatic search3. Change channels: Press the “-” or “ ” buttonPlay music by connecting with portable storage devices1. USB/TF card: insert USB/TF card (max 32gb) into corresponding interface, then turn on the Bluetooth Speaker, music will be played automatically, if not, please to press “mode” to switch to USB/TF card mode.(Please use MP3 format files) 2. Please tum off the speaker before you remove the portable storage devices, otherwise the stored data may be lost. Play Please play How to charge the Bluetooth SpeakerPlug the micro 5-pin USB into the DC port( in the diagram) of Bluetooth speaker (When battery is being charged, the built-in LED will show as red).USAGE TIPS 66POWER5V6Make sure your mobile devices have Bluetooth function before using this product. Please fully charge the speaker before using it for the rst time.In order to protect the circuit of this speaker and the long-term performance of the built-in  please do not play music while charging.The  range of the speaker may be in . For instance walls, pillars, etc. To ensure a stable  on we recommend avoiding such 2ACP4-SPBT10 SPBT
FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void theuser's authority to operate the equipment.

Navigation menu