Sercomm IP806BB RCA WiFi Enabler User Manual

Sercomm Corporation RCA WiFi Enabler QIG

a href="https://usermanual.wiki/Sercomm" itemprop="url"> Sercomm >

manual

Quick Installation Guide 802.11g/802.11b Access Point/Router 1. Introduction Package Contents The following items should be included: If any of the above items are damaged or missing, please contact your dealer immediately. Physical Details Front Panel LEDs Power On - Normal operation. Off - No power LAN On - The LAN (Ethernet) port is active. Off - No active connection on the LAN (Ethernet) port. Flashing - Data is being transmitted or received via the corresponding LAN (Ethernet) port. WAN On - The WAN (Ethernet) port is active. Off - No active connection on the WAN (Ethernet) port. Flashing - Data is being transmitted or received via the corresponding WAN (Ethernet) port. Wireless LAN On - Idle. Off - Error- Wireless connection is not available. Flashing - Data is being transmitted or received via the Wireless access point. Data includes "network traffic" as well as user data. Mode On – AP mode Off – Router mode WPS Following WPS standard SPEC
Rear Panel Antennae One antenna is supplied. Best results are usually obtained with the antennae in a vertical position. Reset Button This button has two (2) functions: Reboot. When pressed and released, the Wireless Access Point will reboot (restart). Reset to Factory Defaults. This button can also be used to clear ALL data and restore ALL settings to the factory default values, as follows: 1. Power off the Access Point. 2. Hold the Reset Button down while you Power On the Access Point. 3. Continue holding the Reset Button until the Status (Red) LED blinks TWICE. 4. Release the Reset Button. The factory default configuration has now been restored, and the Access Point is ready for use.
Download:
Mirror Download [FCC.gov]
Document ID922630
Application ID/XuGDH/ApK0Xqcs7u6ZZRA==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize21.97kB (274605 bits)
Date Submitted2008-04-02 00:00:00
Date Available2008-04-02 00:00:00
Creation Date2008-01-10 16:32:14
Producing SoftwarepdfFactory Pro 2.43 (Windows XP Home Chinese)
Document Lastmod2008-03-14 15:07:07
Document TitleQIG.doc
Document CreatorpdfFactory Pro www.pdffactory.com
Document Author: Bobby
FCC ID Filing: P27IP806BB

Navigation menu