Sharp HRO00067 Cellular Transceiver with Bluetooth User Manual Manual
Sharp Corporation Cellular Transceiver with Bluetooth Manual
Sharp >
Contents
Manual
Declaration of Conformity
Hereby, Sharp Telecommunications of Europe Limited, declares
that this SH9010C is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
A copy of the original declaration of conformity can be found at the
following Internet address:
http://www.sharp-mobile.com
Sharp Telecommunications of Europe Ltd.
Azure House, Bagshot Road, Bracknell, Berkshire RG12 7QY UK
Introduction 1
Introduction
Congratulations on your new Sharp SH9010C phone.
About This User Guide
This user guide is carefully designed to help you learn about your
phone’s features and operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate permanent
written records of all important data. Data may be lost or altered
in virtually any electronic memory product under certain
circumstances. Therefore, we assume no responsibility for data
lost or otherwise rendered unusable, whether as a result of
improper use, repairs, defects, battery replacement, use after
the specified battery life has expired or any other cause.
• We assume no responsibility, directly or indirectly, for financial
losses or claims from third parties resulting from the use of this
product and any of its functions, such as stolen credit card
numbers, the loss or alteration of stored data, etc.
• All company and/or product names are trademarks and/or
registered trademarks of their respective holders.
• Screen layout may differ from that illustrated in this user guide.
The information described in this user guide is subject to change
without notice.
• All the functions described in this user guide may not be
supported by all networks.
• We assume no responsibility for downloaded contents,
information, etc. from the network.
Intellectual Property Rights
According to copyright laws, the reproduction, alteration and use of
material which is protected by copyright (music, pictures, etc.) is
only permitted for personal or private use. If the user is not in
possession of more extensive copyright or has not received the
explicit permission from the copyright owner to reproduce, alter or
use a copy which has been made or modified in this way, this is
considered to be a violation of the copyright laws and gives the
copyright owner the right to claim for damages. For this reason,
avoid the illegal use of material which is protected by copyright.
2 Introduction
Powered by JBlend™ Copyright 1997-2008 Aplix
Corporation. All rights reserved.
JBlend and all JBlend-based trademarks and logos are
trademarks or registered trademarks of Aplix Corporation in
Japan and other countries.
Powered by Mascot Capsule®/Micro3D Edition™
Mascot Capsule® is a registered trademark of HI Corporation
©2002-2008 HI Corporation. All Rights Reserved.
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,187,480, 5,818,437, 5,945,928, 5,953,541, 6,011,554, 6,286,064,
6,307,548, 6,307,549, and 6,636,162, 6,646,573, 6,970,599; Australia
Pat. Nos. 727539, 746674, 747901; Austria Pat. Nos. AT225534,
AT221222; Brazil P.I. No. 9609807-4; Canada Pat. Nos. 1,331,057,
2,227,904, 2,278,549, 2,302,595; Japan Pat. Nos. 3532780, 3492981;
United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No.
HK1010924; Republic of Singapore Pat. Nos. 51383, 66959, 71979;
European Pat. Nos. 1 010 057 (98903671.0), 1 018 069 (98950708.2);
Republic of Korea Pat. Nos. KR201211B1, KR226206B1, 402252; People’s
Republic of China Pat. No. ZL96196739.0; Mexico Pat. Nos. 208141,
216023, 218409; Russian Federation Pat. Nos. 2206118, 2214620,
2221268; and additional patents are pending worldwide.
CP8 PATENT
microSD Logo is a trademark.
Bluetooth
is a trademark of the Bluetooth SIG, Inc.
The
Bluetooth
word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Sharp is under license.
Other trademarks and trade names are those of their respective owners.
Licensed by QUALCOMM Incorporated under one or more of the following
United States Patents and/or their counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
Introduction 3
This product contains NF Browser and NF Messaging Client of ACCESS CO.,
LTD.
© 2008 ACCESS CO., LTD. All rights reserved.
ACCESS is a trademark or registered trademark of ACCESS CO., LTD. in the
United States, Japan and other countries.
This software is based in part on the work of the Independent JPEG Group.
Microsoft®, Windows®, Windows Vista®, Outlook®, PowerPoint® and
Excel® are registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Microsoft Word is a product name of Microsoft Corporation in the United
States.
Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.
Adobe, the Adobe logo, FlashLite and the
FlashLite logo are either trademarks or
registered trademarks of Adobe Systems
Incorporated in the United States and/or
other countries.
© 2003-2007 Adobe Systems Incorporated. All rights reserved.
“Document Viewer” is powered by Picsel
Technologies. Picsel, Picsel Powered, Picsel Cube
Logo, Picsel File Viewer and Picsel Document
Viewer are Trademarks or Registered Trademarks
of the Picsel Group of Companies.
CYCLOID is a registration-pending trademark of SHARP Corporation in
People’s Republic of China.
IrSimple™, IrSS™ and IrSimpleShot™ are trademarks of the Infrared Data
Association®.
This product is licensed under the MPEG-4 Visual Patent Portfolio License for
the personal and non-commercial use of a consumer to (i) encode video in
compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii)
decode MPEG-4 Video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained from a licensed
video provider. No license is granted or implied for any other use. Additional
information may be obtained from MPEG LA.
See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent Portfolio License
for encoding in compliance with the MPEG-4 Systems Standard, except that
an additional license and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media which is paid
for on a title by title basis and/or (ii) data which is paid for on a title by title
basis and is transmitted to an end user for permanent storage and/or use.
Such additional license may be obtained from MPEG LA, LLC.
See http://www.mpegla.com for additional details.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
4 Introduction
Useful Functions and Services
Your phone offers you the following features:
• Cycloid position. You can rotate the display 90° clockwise for
viewing images in a 3.2-inch full wide VGA LCD.
• Advanced Super View (ASV) colour LCD main display with images
that are clearer and easier to view.
• A built-in digital camera with an auto focus function for taking
pictures and video clips.
• A message function for reading and creating SMS messages.
• MMS (Multimedia Messaging Services) for sending picture,
sound and video messages to brighten someone’s day.
• Email for sending up to 300 KB and receiving mail with
attachments.
• A colour WAP/Web browser for accessing information on the
mobile Internet.
• Your own ringtones and ring video clips. You can use sound or
video clip files as a ringtone or ring video clip.
• A music player that can play back MP3, MPEG-4 and 3GPP
format sound files (supported codec of MPEG-4 or 3GPP are
AMR, AAC, AAC+, and AAC+e).
• Playback of downloaded sound and video clip files.
• A voice recorder function for recording and playing back voice
clips.
•A
Bluetooth
® wireless technology interface for establishing
contact and transmitting data with certain devices. You can
transmit pictures, sounds, and video clips to OBEX-enabled
phones.
• An infrared interface for data communication. You can transmit
pictures, sounds, and video clips to OBEX-enabled phones.
• A schedule alarm for creating and sending schedule entries with
alarm settings.
• A microSD™ memory card slot that expands connectivity with a
PC using the memory card.
Contents 5
Contents
Introduction ................................................................ 1
List of Menu Functions ............................................... 7
Your Phone ................................................................. 9
Optional Accessories .............................................. 9
Getting Started ......................................................... 10
Inserting/Removing the SIM/USIM Card and the
Battery ................................................................ 13
Charging the Battery ............................................ 14
Inserting/Removing the Memory Card ................... 15
Connecting the Handsfree Kit ............................... 16
Turning Your Phone On and Off ............................ 17
Cycloid Position ................................................... 17
Display Indicators (Main Display) ........................... 19
Display Indicators (External Display) ...................... 21
Navigating Functions ............................................... 22
Voice Call Functions ................................................. 23
Entering Characters ................................................. 27
Changing the Input Language ............................... 27
Changing the Input Method .................................. 27
Chinese User Dictionary ....................................... 31
Using Templates .................................................. 34
Copying, Cutting and Pasting Text ........................ 34
Insert Phonebook Entries ...................................... 34
Using the Menu ........................................................ 35
Main Menu .......................................................... 35
Shortcut Keys ...................................................... 35
Shortcuts ............................................................ 36
Call Manager ............................................................ 37
Sending a Message from the Phonebook .............. 38
Multimedia ............................................................... 42
Camera ..................................................................... 45
Taking Pictures .................................................... 45
Recording Video Clips .......................................... 45
Common Functions in the Photo and Video Camera
Modes ................................................................ 45
Functions in Photo Camera Mode ......................... 48
Functions in Video Camera Mode .......................... 50
Messages ................................................................. 51
SMS ................................................................... 51
MMS .................................................................. 51
Email .................................................................. 51
Area Info ............................................................. 56
6 Contents
Browser .....................................................................60
Navigating a WAP or Web Page ............................60
Gallery .......................................................................63
Java™ .......................................................................68
Organiser ..................................................................72
SIM Application ........................................................86
Settings .....................................................................87
Call Log ...................................................................104
Connectivity ............................................................106
Bluetooth ...........................................................106
Infrared .............................................................108
Mass Storage ....................................................108
USB Charge .......................................................108
Card Settings .....................................................109
Connecting SH9010C to Your PC ............................110
System Requirements ........................................110
GSM/GPRS Modem ............................................110
Handset Manager ...............................................111
Music Manager ..................................................112
Sync Manager ...................................................114
Safety Precautions and Conditions of Use ............115
Conditions of Use ...............................................115
Mobile Light LED Properties ................................116
Environment ......................................................117
Precautions Concerning Vehicle Use ....................118
SAR ..................................................................118
FCC NOTICE ......................................................118
Out of Warranty List ...............................................122
Index .......................................................................123
List of Menu Functions 7
List of Menu Functions
SH9010C functions are listed below.
See relevant page for details of each function. The menu’s corresponding number is used for shortcuts. For details, see page 35.
1Java™
1Java™ Gallery p. 68
2Java™ Settings p. 69
3Java™
Information
p. 71
2Browser
1Homepage p. 60
2Go to URL p. 60
3Bookmarks p. 60
4Alert Inbox p. 60
5My Saved Page p. 60
6Access History p. 60
7Browser Settings p. 61
3Organiser
(Tab 1: Tools 1)
1Calendar p. 72
2Alarms p. 76
3Tasks p. 77
4Calculator p. 79
5Expenses Memo p. 80
(Tab 2: Tools 2)
1Stopwatch p. 81
2Countdown Timer p. 81
3World Clock p. 81
4Hour Minder p. 82
(Tab 3: Tools 3)
1Document Viewer p. 82
2Text Templates p. 83
3Voice Recorder p. 83
4Scanner p. 84
5Phone Help p. 85
4Messages
1Create Message p. 51
2Message p. 53
3Email p. 53
4Alert Inbox –
5Voice Mail –
6Cell Broadcasts p. 55
7Area Info p. 56
8Messaging
Settings
p. 56
9Memory Status –
5Camera p. 45
6Gallery
1Picture Gallery p. 63
2Video Gallery p. 63
3SD VIDEO p. 64
4Sound Gallery p. 64
5Books –
6Themes p. 65
7Java™ Gallery p. 68
8Other Documents p. 65
9Flash®p. 65
10 Memory Status p. 67
7Multimedia
1Streaming Player p. 42
2Video Player p. 42
3Music Player p. 43
8 List of Menu Functions
8Call Manager
1Phonebook p. 37
2Add New p. 37
3Play Messages –
4Call Voicemail –
5Manage Groups p. 40
6My Card p. 37
7Speed Dial List p. 41
8Message Groups p. 38
9Phonebook
Settings
p. 37
10 Service Dialling
No.*
p. 38
11 Advanced p. 39
9Settings
(Tab 1: Phone Settings)
1Profiles p. 87
2Display Settings p. 88
3Themes p. 90
4Sound Settings p. 91
5Date & Time p. 93
6Language p. 93
7Display Rotation p. 94
8Switch ringtone
output
p. 94
9Earpiece Volume –
10 Change Menu p. 94
11 Security Settings p. 94
12 Master Reset p. 96
(Tab 2: Call/Video Call)
1Answer Phone –
2Voicemail & Diverts p. 96
3
Show Your Number
p. 97
4Restrict Calls p. 98
5Minute Minder p. 99
6Auto Answer p. 99
7Call Waiting p. 100
8Display Call Timer p. 100
9Display Call Cost p. 100
10 Auto Redial p. 100
(Tab 3: Network Settings)
1Network Settings p. 100
2Off Line Mode p. 101
3Internet Settings p. 101
10 SIM Application*
p. 86
11 Call Log
1All Calls p. 104
2Dialled Numbers p. 104
3Missed Calls p. 104
4Received Calls p. 104
5Call Timers p. 104
6Call Costs*p. 104
7Data Counter p. 105
12 Connectivity
1Bluetooth p. 106
2Infrared p. 108
3Mass Storage p. 108
4USB Charge p. 108
5Card Settings p. 109
*Depends on SIM/USIM card
contents.
Your Phone 9
Your Phone
Please check the following carefully. Your phone should come
complete with:
• EDGE/GSM 900/1800/1900 GPRS phone
• Rechargeable Li-ion Battery
• AC Charger
• Stereo Handsfree
•User Guide
• USB Data Cable
•Quick Start Guide
•CD-ROM
• Warranty
Optional Accessories
• Li-ion Spare Battery
• USB Data Cable
• AC Charger
• Stereo Handsfree
Note
•Use only the accessories supplied or accessories approved by
Sharp.
10 Getting Started
Getting Started
1
13
18
19
14
17
15
16
20
2
5
6
3
4
7
8
9
10
11
12
22
24
25
26
23
21
29
30
31
28
27
Getting Started 11
1. Earpiece
2. Light Sensor
3. Main Display
4. Speaker
5. Navigation Keys (Arrow Keys): abcd
Moves cursor to highlight a menu item, etc.
Up arrow key (a) displays the Bookmarks when pressed in
standby.
Down arrow key (b) displays the Phonebook entries when
pressed in standby.
Left arrow key (c) displays the Java™ Gallery list when pressed
in standby.
Right arrow key (d) displays Gallery when pressed in standby.
6. Centre Key: B
Displays Main menu in standby, and executes functions.
Long press in standby to initiate video camera.
7. Left Soft Key: A
Executes the function in the lower left of the screen.
Displays Message menu in standby.
8. Send/Redial Key: D
Makes voice calls or accepts calls, and displays the call logs in
standby.
9. Shortcut Key: E
Displays Shortcut menu.
10. Voicemail Key: G
Long press to connect to the Voicemail centre. (Depending on the
SIM/USIM card.)
11. * /Shift Key: P
Switches character input method as follows on the text entry
screen.
Abc, ABC, abc, 123, T9 PinYin, and T9 Stroke
Press to enter P, ? or * in standby.
Long press in standby to lock the keypad.
12. Multiple Functions Key: S
Press in standby to switch Profiles settings.
Long press in standby to switch Profiles settings between the
mode most recently activated and Silent mode.
Switches displays when multiple applications are launched.
13. Right Soft Key: C
Executes the function in the lower right of the screen.
Opens the browser in standby.
14. End/Power Key: F
Ends a call and turns power on/off.
15. Clear/Back Key: U
Clears the characters before the cursor, returns to the previous
screen, etc.
16. Multimedia Key: T
Displays Multimedia menu.
17. Keypad
18. #/Silent Key: R
Displays symbol screen on the text entry screen.
Long press to switch languages on the text entry screen.
Long press in standby to switch Profiles settings between the
mode most recently activated and Silent mode.
12 Getting Started
19. Microphone
20. External Connector:
Used to connect either the charger or a USB data cable.
21. Sub Display
22. Small Light:
Flashes when an incoming call or a new message is received or
missed, if Event Light (p. 87) or Status Light (p. 87) is enabled.
23. Built-in Aerial:
Warning: Do not cover the top of the phone with your hand when
in use as this may interfere with the performance of the built-in
aerial.
24. microSD Card Slot
25. Side Keys: VW
Press in standby or during a call to increase or decrease the
earpiece volume.
Press while listening to music (or video) to increase or decrease
the earpiece volume.
26. Camera Key: X
Long press in standby to activate the camera.
Takes a picture or starts recording video when the camera is
active.
Press when the phone is closed to turn on the sub display.
Long press when the phone is closed to turn on the Small Light.
27. Mobile Light:
Used as a flash in camera mode or as an auxiliary light.
28. Battery Cover
29. Camera
30. Handsfree Kit/Microphone Connector
31. Infrared Port:
Sends and receives data via infrared.
Getting Started 13
Inserting/Removing the SIM Card and the
Battery
1. Slide off the battery cover ( ).
2. Slide the SIM card into the SIM holder .
3. Hold the battery so that the metal contacts of the battery are
facing down, slide the guides on the top of the battery into
the battery slots , and then insert it .
4. Replace the battery cover.
Note
•Make sure that only 3V SIM cards are used.
•Make sure that the standard Sharp accessory battery is used.
Battery Disposal
The device is battery-powered. In order to protect the environment,
please read the following points concerning battery disposal:
• Take the used battery to your local waste depot, dealer or
customer service centre for recycling.
• Do not expose the used battery to a naked flame, immerse in
water or dispose with the household waste.
1
2
3
SIM card
5
4
14 Getting Started
Charging the Battery
You must charge the battery for at least 150 minutes before
using your phone for the first time.
Using the Charger
1. Open the cover of the external connector, and connect
the charger horizontally to the external socket located at
the bottom of the phone until it clicks.
2. Connect the charger to an AC outlet.
When the phone is charging, the battery status icon ( )
displays the current status. The Small Light also lights up.
Standard charging time: Approx. 150 minutes
Note
•Charging time may vary depending on the state of the battery
and other conditions. (See “Battery” on page 116.)
To Disconnect the Charger
When charging is completed, the battery indicator icon displays
the full charge status. The Small Light also turns off when
completed.
1. Unplug the charger from the AC outlet.
2. Push and hold the side buttons of the charger , then
disconnect the charger from the external socket of the
phone .
3. Close the cover.
Note
•Do not use any non-approved chargers as they may damage
your phone and invalidate any warranties, see “Battery” on
page 156 for details.
•Forcibly disconnecting the charger may cause malfunction.
Getting Started 15
Battery Level Indicator
The current battery level is displayed in the upper right of the main
and external displays.
Low Battery during Use
When the battery is running low, an alarm will sound and “ ” or
“ ” is displayed on the main and external displays respectively.
If you are using your phone and you hear the low battery alarm,
attach your charger as soon as possible. The phone may not be
able to continue normal operation if you continue to use it.
Inserting/Removing the Memory Card
Note
•Make sure that the phone is turned off before inserting/removing
the memory card.
•Be sure to insert the card in the correct direction and orientation.
•Keep all memory cards out of the reach of small children.
1. Turn off the phone.
2. Open the microSD card slot cover.
Battery Indicators Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
16 Getting Started
3. Insert the memory card until it clicks. (To remove the
memory card, push the memory card until it clicks.)
4. Close the cover.
Tip
•You see the following indicators when the memory card is in use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable. Make sure
the card is properly inserted.
: Appears when the card is being written to or read.
: Appears when the card is being formatted.
Connecting the Handsfree Kit
1. Open the connector cover.
2. Connect the handsfree kit.
Getting Started 17
Turning Your Phone On and Off
To turn the power on or off, long press F for approximately 2
seconds.
To Enter the PIN Code
If the PIN (Personal Identification Number) code is enabled you are
asked to enter the PIN code each time the phone is switched on.
For details on setting the PIN code, see “Enabling/Disabling the PIN
Code” on page 94.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press B.
Note
•If your PIN code is entered incorrectly three times in a row, the
SIM/USIM card is locked. See “Enabling/Disabling the PIN Code”
on page 94.
•If the clock settings have not been entered, the date and time
entry screen is displayed (p. 93).
To Copy All Phonebook Entries from the SIM/USIM Card
“Call Manager”
→
“Advanced”
→
“Copy All Entries”
1. Select “From SIM to Handset”.
Cycloid Position
Rotating the Display
1. Open the phone into portrait position as illustrated.
2. Turn the display 90° clockwise.
18 Getting Started
Note
•Do not turn the display anticlockwise as this may damage the
phone.
•Do not carry the phone in the cycloid position as this may
damage the display.
Assigning a Function
You can assign a function to activate automatically when the display
is rotated to the cycloid position in standby.
When the display is rotated for the first time, the “Rotate 90° to”
screen is displayed.
Select a function to assign from the following items:
• Show Multimedia Menu
•Open Received Msg
• Activate Camera/Video
• Show Main Menu
• Off (Standby)
Note
•You can change the assigned function by pressing [Rotate 90°
to] on the screen, or from the Display Rotation menu (p. 94).
•Some functions remain active even if the display is rotated from
the portrait position while a function is active.
Getting Started 19
Display Indicators (Main Display) 1. / : Strength of received signal/Service out of range
: EDGE
: GPRS enabled
: Roaming outside network
2. / : Connection to the server [established/
communicating]
3. / : Voice call [incoming/in progress]
4. / : Alerts [text message and multimedia message/
Email]
5. / / /#:
Mailbox full [SIM/USIM card only/handset only/both
SIM/USIM card and handset/Email only]
6. : “Voice Calls” diverts set to “Always”
7. ///////:
Connection status
[USB cable [standby/exchanging information]/IrDA
setting [standby/exchanging information]/
Bluetooth
wireless setting [standby/exchanging information/
talking with the
Bluetooth
headset/Hide my phone]]
8. / / : Java™ application [executed (colour)/suspended
(grey)]/Music
Right soft keyCentre keyLeft soft key
Indicator area
20 Getting Started
9. : Secure WAP/Web page displayed
10. / / : Silent/vibration setting [silent/vibration enabled/
silent and vibration enabled]
11. / / : Speaker mode [speaker phone/speaker activated/
microphone muted]
12. : Memory card inserted
13. / : Battery level [normal position/cycloid position]
14. : Daily alarm enabled
15. / : Schedule entry enabled [with/without reminder
alarm]
16. : Outbox contains unsent messages [text message/
multimedia/Email]
17. / / : WAP/OTA provisioning alerts [WAP alert/OTA
provisioning alert/WAP and OTA provisioning alerts]
18. : Voicemail message alert
19. : “Show Secret Data” set to “On”
20. : Function Lock enabled
21. : Keypad Lock enabled
22.(No display)///:
Current profile [Normal/Car/Silent/Original]
23. : Hour minder enabled
24. : Auto answer enabled
Getting Started 21
Display Indicators (External Display)
Status Indicators
1. ///:
Battery level [sufficiently charged/charging
recommended/charging required/empty]
2. : Clock
3. / : Strength of received signal/Service out of range
4. / : Missed events
5. : Voice call incoming
6. : Call in progress
7. / : Alerts [messages/Delivery Report]
8. / / :
Alarm enabled [Daily alarm/Schedule alarm/Task
alarm]
9. : Sound file being played
10. : Streaming
11. : Stopwatch/countdown timer
12. : OBEX data incoming
13. : Voice Recorder activated
22 Navigating Functions
Navigating Functions
All applications are accessed from the Main menu. To open the
Main menu, press the centre key B in standby.
To launch applications, you will need to highlight menu items, and
make selections. To select a menu item (indicated in quotation
marks), move the cursor using a, b, c and d, and press B
to select.
In certain procedures, you will need to press one of the soft keys
(indicated in square brackets), which are displayed in the lower left
and right of the screen. Press the corresponding soft key (A or
C).
To return to the previous screen, press the right soft key if it
displays
Back
. To close the Main menu, press the right soft key if it
displays
Back
.
Each section in this user guide starts with a list of items you will
need to select in order (indicated in italics) before performing the
procedures shown. Select each item to reveal the next set of items
that you have to choose from. Open subsection items after opening
those listed in the main section.
Example:
“Java™”
→
“Java™ Settings”
The following menus have tabs - Organiser and Settings.
You can select the desired tab with the c/d key, and after that
you can select the item you wish to set in the selected tab with the
a/b key.
Example:
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
Voice Call Functions 23
Voice Call Functions
Making a Voice Call
1. Enter the area code and the phone number you wish to dial,
and then press D to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
Emergency Calls
1. Enter the official emergency number for your location using
the keypad and press D to dial.
Note
•It may not be possible to make emergency calls on all mobile
phone networks when certain network services and/or phone
features are in use. Contact your service provider for more
information.
•Emergency numbers differ depending on the location.
•Before making the emergency call, make sure the phone is
turned on, the signal is strong, and a SIM/USIM card is inserted
properly.
•During an emergency call, do not end the call until you are given
permission to do so.
•Connection in all conditions cannot be guaranteed for wireless
phones. You should never rely solely on any wireless device for
communication during an emergency.
International Calls
1. Long press Q until a + (international dialling prefix) sign
is displayed.
2. Enter the country code, followed by the area code (without
the leading zero) and the phone number, and press D to
dial.
Adding an Entered Phone Number to the Phonebook
1. After entering a phone number, press [Options] and select
“Save Number”.
For details on creating a new entry, see “Adding a New Entry”
on page 37.
Showing or Hiding My Phone Number on the Display of the
Called Party
1. After entering a phone number, press [Options], select
“Show My ID” or “Hide My ID” and press D to dial.
24 Voice Call Functions
Speed Dialling
Up to 8 phone numbers from the Phonebook memory (Handset and
SIM/USIM) can be assigned to speed dials. You can call the
numbers using the digit keys (G to O). The phone number of
the Voicemail centre is assigned to G.
For details on setting the speed dial list, see “Speed Dial List” on
page 41.
1. To dial a number using the speed dial, long press any of the
digit keys (G to O).
The phone number saved in the speed dial list is dialled.
Redialling
You can redial numbers in the call log. Select from specific
categories or “All Calls”. Specific categories contain up to 30
numbers and the “All Calls” list contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial a voice call.
Answering a Voice Call
When an incoming call is detected, the phone rings.
1. Press D or B to answer the call.
Or press any key except F, U, S, [Options] or [Busy]
when the “Any Key Answer” function is enabled. Set the Any
Key Answer function in the profile of each mode (p. 88).
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you do not
wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy tone
to the caller.
In Call Menu (Voice Call)
Adjusting the Earpiece Volume
You can adjust the earpiece volume (and handsfree kit volume, if
connected) to five levels.
1. Press V or W to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call or
press W (or b/c) to decrease the volume.
3. Press B when the volume is set to the desired level.
Voice Call Functions 25
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it is on.
1. During a call, press B.
Putting a Call on Hold
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another call to,
then press D.
Tip
•You can also make another call by entering the phone number
during a call instead of step 1. The current call is automatically
put on hold.
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select “Messaging”.
The following options are available: “Create Message” to make
an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to access
these folders. For details on SMS and MMS, see “SMS” and
“MMS” on page 51.
Call Waiting
1. During a call, press [Options] and select “Hold & Answer” to
answer the second call.
The first call is put on hold and you can now talk to the second
caller.
You can also answer the second call by pressing D.
Note
•You need to set “Call Waiting” to “On” if you wish to use the Call
Waiting service (p. 100).
•Call Waiting service may not be available on all networks.
Contact your service provider for more information.
•If you do not wish to answer the second call, press [Options] and
select “Busy” in step 1. If “Reject” is selected, the log of the
second call is saved as a missed call.
Conference Call
Conference call is a call with more than 2 participants. You may
include up to 5 participants in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Conference All” to
join the conference call.
2. Press F to end the conference call.
26 Voice Call Functions
Note
•The conference call service may not be available on all networks.
Contact your service provider for more information.
•To end the call with all participants, press [Options] and select
“End All Call(s)”.
•To reject adding more participants to the current party, press
[Options] and select “Reject”, or you can send the busy tone by
selecting “Busy”.
•You have more options for the Conference call after selecting
“Conference All” in step 1:
•To put all participants on hold, select “Hold All”.
•To put all participants except the current call on hold, select
“Private”.
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the conference call
and press D to dial.
3. Press [Options] and select “Conference All” to join the
conference call.
If you wish to add other participants, repeat steps 1 to 3.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that you wish
to disconnect from the conference call.
2. Press [Options] and select “End This Call”.
To Have a Private Conversation with One of the Participants
1. During a conference call, select the person that you wish to
talk to.
2. Press [Options] and select “Private”.
3. Once you have finished the private conversation, press
[Options] and select “Conference All” to return to the
conference call.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].
Entering Characters 27
Entering Characters
In multi-tap input method, press each key until the desired
character is displayed. For example, press H once for the letter
A or twice for the letter B.
Press the following keys to:
Long press the following keys to:
Changing the Input Language
1. On the text entry screen, press [Options] and select “Input
Language”.
2. Select the desired language.
Changing the Input Method
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the input method you wish to use.
Tip
•In T9 or multi-tap mode, you can switch input mode as follows
by pressing P.
G: Enter:
. (full-stop) , (comma) ? ! : ; ' (apostrophe) " / 1
Q: Enter:
(space)+ = < > € £ $ ¥ % & 0
P: Switch character case among four modes:
Abc, ABC, abc and 123.
R: Enter other characters.
G-O: Enter 1-9 numbers.
Q: Enter space in Numeric mode or to enter 0 in other
modes.
P: Shift between multi-tap and T9 mode.
R: Display the language options screen.
Input Method Input Language
= English
Input Language
= Traditional
Chinese
Input Language
= Simplified
Chinese
T9 Mode
T9 Abc
T9 ABC
T9 abc
T9 Stroke T9 PinYin
T9 Stroke
Multi-tap mode
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
28 Entering Characters
English/T9 mode
English/Multi-tap mode
Traditional Chinese/T9 mode
Simplified Chinese/T9 mode
T9 English Mode
Using T9 English Mode
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the T9 mode (T9 Abc, T9 ABC, T9 abc) you wish to
change. “ ” is displayed on the main display.
4. Press the keys to enter characters.
5. Press a or b to select the word you wish to input.
6. If you wish to clear the word, highlight it and long press
U.
7. Press B, or press [Options] and select “Done” to complete
the selection.
Tip
•If you press Q instead of step 6, a space is inserted next to
the selected word.
User Dictionary
You can create your own English words for T9 Alphabet text input.
Note
•This function is only available when “Input Language” is set to
“English”.
1. On the text entry screen in T9 mode, press [Options] and
select “User Dictionary”.
2. Select “Add New Word” and enter a new word.
Entering Characters 29
To Edit a Word in the List
1. On the text entry screen in T9 mode, press [Options] and
select “User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
T9 PinYin and T9 Stroke Mode
In T9 PinYin and T9 Stroke mode, keys are as follows.
T9 PinYin and T9 Stroke Mode keys
G-O: Long press to input corresponding Chinese
character displayed in the candidate field.
P: Long press to enter tones “ ” in T9 PinYin
mode.
R: Long press to display the Input Language screen.
Changing the Input Method between Stroke and PinYin
See
“Changing the Input Method” on page 27
.
Key Stroke PinYin
G
Habc
Idef
Jghi
Kjkl
LWildcard mno
Mpqrs
Ntuv
Owxyz
PChange Input Method
QSpace
RGo to the FullWidth Symbols screen.
Key Stroke PinYin
30 Entering Characters
Using Stroke Mode (Traditional)
The following is an example of entering “ ”.
1. Change the input mode to T9 Stroke
mode.
2. Press IGJ to display the
corresponding stroke for “ ”.
3. Long press the corresponding key to
complete the selection (in this case,
M).
Note
•Each Traditional/Simplified Chinese mode has own T9 Stroke
mode. The screen examples in steps 1 to 3 are displayed when
you select “Traditional Chinese” in the Input Language option.
Using PinYin Mode
The following is an example of entering “ ”.
1. Press K for the first letter of the reading, then highlight
“l”.
2. Press J for the vowel of the first letter, then highlight “li”.
Characters with the same reading are displayed in the
Candidate field.
Long press the corresponding
numeric key to select the
desired character directly from
the Candidate field.
Candidate field
Input field
Entering Characters 31
3. Select the desired character.
4. Long press corresponding numeric key to enter the desired
character (in this case, H).
Tip
• If you want to use tone options, long press
P instead of step 3 to display the desired
character.
The tone symbols are displayed in the
Candidate field.
Press the corresponding numeric key (H).
Chinese User Dictionary
Note
•This function is only available when “Input Language” is set to
“Traditional Chinese” or “Simplified Chinese”.
Creating a New Entry
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Select “Add New Word”.
3. Enter new word.
4. Enter acronym.
Editing a Word in the List
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the entry word.
5. Modify the acronym.
Deleting a Word
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Delete”.
4. Press [Yes] or [No].
32 Entering Characters
To Call the Entry
Examples of entry words and acronyms:
The illustration below assumes that the example entry words and
acronyms are already stored.
1. Press M and highlight “S”.
If you long press G, “ ” will be
entered.
You can also select the other words
starting with the same acronym by
pressing b.
2. Press H and highlight “SB”.
If you long press G, “ ” will be
entered.
Note
•Acronyms are available for T9 PinYin mode only.
•You can also enjoy word completion or predictive input of the
words stored in the Chinese User Dictionary.
When the first three characters of a word are entered, the whole
word appears at once.
The following is an example of predictive input and word
completion. This example uses words stored in the last section.
1. Press H, K, I and long press
H to enter “ ”.
2. The character “ ” appears at .
(Candidates and are taken from the
Chinese User Dictionary.)
This example is
using T9 PinYin
mode
Press b
This example is
using Stroke input
method for
Simplified
Entering Characters 33
3. Long press N to enter “ ”.
4. Long press O to enter “ ”.
The sentence is completed automatically.
Note
•Word completion does not take place if the entry word has less
than four Chinese characters.
•Predictive characters from the Chinese User Dictionary appear at
, so you only have to press O to enter the characters.
If there are entry words which start with the same characters
such as “ ” and “ ”, candidates “ ” and “ ” appear
at or , depending on the sequence in which the words are
saved.
Symbols and Punctuations
1. On the text entry screen, press [Options].
2. Select “Add Symbol”.
The first symbol page is displayed.
In Chinese input mode, the FullWidth Symbols screen is
displayed.
3. Press a or b to switch pages (HalfWidth Symbol and
FullWidth Symbol pages), or use the numeric keys G or
H.
Tip
•R is a shortcut to launch Symbol Tables.
34 Entering Characters
Using Templates
For details on creating the text template, see “Adding Phrases to
Text Templates” on page 83.
1. On the text entry screen, move the cursor to the point you
wish to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select
“Advanced”.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to be cut,
then press B.
4. Move the cursor to the last letter to highlight the area, then
press B.
5. Move the cursor to the point you wish to paste the letters.
6. Press [Options] and select “Advanced”.
7. Select “Paste”.
Insert Phonebook Entries
For details on creating the Phonebook entries, see “Call Manager”
on page 37.
1. On the text entry screen, move the cursor to the point you
wish to insert the Phonebook Entry.
2. Press [Options] and select “Advanced”.
3. Select “Insert Phonebook Entry”.
4. Select the desired Phonebook Entry.
The selected entry is inserted.
Using the Menu 35
Using the Menu
Main Menu
1. Press B in standby.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired menu, then
press B to access the function.
To select a menu item in the cycloid position, move the cursor
using c or d.
For details on the menu options, see “List of Menu Functions”
on page 7.
Shortcut Keys
You can access menus by pressing B and digit keys for the
corresponding number on the Main menu. For numbers 10 to 12,
press B and P (10), Q (11) or R (12). For menus with
tabs, press d (or c when necessary) to select the desired tab
before pressing the digit keys. See “List of Menu Functions” on
page 7.
Shortcuts are listed in the headings of this user guide.
Example (p. 101):To Access “Off Line Mode” Sub Menu
Off Line Mode
“Settings”
→
“Network Settings” tab
→
“Off Line Mode”
Press BO and d twice for the “Network Settings” tab, then
press H.
Example (p. 40): To Access “Manage Groups” Sub Menu
Manage Groups
Press BNJ.
Note
•The shortcut keys work for the first three menu levels only.
(M 9-d-d-2)
(M 8-4)
36 Using the Menu
Shortcuts
Your phone has a shortcut function (press E in standby) which
enables you to access the desired menu quickly. The default
shortcuts are as follows (shortcuts assigned to G-O can be
customised):
• Main Menu
• Enter Number
•G: Inbox
•H: Create Message
•I: Bookmarks
•J: Calendar
•K: Phonebook
•L:Gallery
•M:Calculator
•N:Alarms
•O: Bluetooth
To Use the Shortcut Key
1. Press E in standby.
2. Select the desired item or number.
To Customise the Assigned Shortcuts
1. Press E in standby.
2. Highlight the shortcut you wish to customise from
G-O.
3. Press [Options] and select “Assign”.
The list of the available items is displayed.
4. Select the desired item.
Note
•To move the item in the list that appears in step 1, highlight the
item, press [Options] and select “Move”. Then press a or b to
the desired location and press B.
•To reset the customised shortcut, press [Options] and select “Set
to Default” in step 2.
Call Manager 37
Call Manager
Your phone can store up to 750 entries. For each entry, you can
enter information including up to 5 phone numbers and 5 Email
addresses. There is a limit to the number of characters that can be
entered for each item. The character limit differs for the handset
memory and SIM/USIM card memory.
Adding a New Entry
Selecting the Storage Memory
“Call Manager”
→
“Phonebook Settings”
→
“Save to”
1. Select from “Handset”, “SIM” or “Choice”.
Registering a New Entry
“Call Manager”
→
“Add New”
1. Select the field you wish to fill in, and enter the relevant
information.
2. Press [Save] when finished.
Saving an Unregistered Number
“Call Manager”
→
“Phonebook Settings”
→
“Save
Unregistered”
1. Select “Incoming Call” or “Outgoing Call”.
2. Select “On” or “Off”.
Registering My Card
“Call Manager”
→
“My Card”
Searching for an Entry
Changing the List Displayed
“Call Manager”
→
“Phonebook Settings”
→
“Source”
1. Select from “Handset”, “SIM” or “Both”.
Finding a Name
“Call Manager”
→
“Phonebook”
1. Enter the first few letters of the name.
The first name corresponding to the entered letters is
highlighted.
Sorting the Phonebook List Order
“Call Manager”
→
“Phonebook Settings”
→
“View
Phonebook”
1. Select “By PinYin” or “By Group”.
Selecting the Search Mode
“Call Manager”
→
“Phonebook Settings”
→
“Search
Mode”
1. Select “Character Search”, “PinYin Search” or “English
Search”.
(M 8)
(M 8-8-3)
(M 8-2)
(M 8-8-5)
(M 8-5)
(M 8-8-2)
(M 8-8-1)
(M 8-8-4)
38 Call Manager
Dialling from the Phonebook
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry and press D to make a voice
call.
Dialling a Service Phone Number
Certain SIM/USIM cards contain service phone numbers that can be
dialled. Contact your SIM/USIM card vendor for more information.
On the Phonebook screen, “Service Dialling No.” is displayed at the
bottom of the list.
“Call Manager”
→
“Service Dialling No.”
1. Select the desired service phone number.
Sending a Message from the Phonebook
“Call Manager”
→
“Phonebook”
1. Select the desired entry including the phone number or
Email address you wish to use.
2. Select the desired phone number or Email address.
3. When a phone number is selected in step 2, select “Create
Message”.
For further procedures, see “Creating a New Message” on
page 51.
Using Mailing Lists
Up to 20 groups can be registered.
To Create a New Mailing List
“Call Manager”
→
“Message Groups”
→
“Add New Group”
1. Enter the group name.
The new group name is displayed following the last group on
the Group List screen.
To Add Recipients to a Group
Up to 20 recipients can be registered in each list.
“Call Manager”
→
“Message Groups”
1. Select the desired group name.
2. Select “Assign New Entry”.
3. Select the desired entry.
The detailed screen is displayed.
4. Select the desired phone number or Email address.
To Send a Message Using a Mailing List
“Call Manager”
→
“Message Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
For further procedures, see “Creating a New Message” on
page 51.
(M 8-9)
(M 8-7)
Call Manager 39
Editing Phonebook Entries
“Call Manager”
→
“Phonebook”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
Adding a Thumbnail to Entries
Only Phonebook entries saved to the handset can have Thumbnails
attached to them.
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Picture”.
4. Select “Assign Picture”.
5. Select the desired picture.
6. Press [Save] when finished.
Note
•If you delete a picture in the handset memory, the corresponding
thumbnail is also deleted.
•To store a picture right after it was taken, select “Take Picture”
in step 4.
Assigning a Ringtone or a Ring Video Clip to Each Entry
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Tone/Video for Voice Call” or “Tone/Video for New
Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “Sound Gallery”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip, see
“Assigning a Ringtone for an Incoming Call” or “Assigning a
Ring Video Clip for an Incoming Call” on page 91.
7. Press [Save] when finished.
Deleting Phonebook Entries
Deleting All Phonebook Entries
“Call Manager”
→
“Advanced”
→
“Delete All Entries”
1. Select from “Handset Entries”, “SIM Entries” or “Both
Entries”.
2. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
(M 8-10-3)
40 Call Manager
Deleting a Phonebook Entry
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
Managing the Phonebook
Copying Phonebook Entries between SIM/USIM Card and
Handset
“Call Manager”
→
“Advanced”
→
“Copy All Entries”
1. Select “From SIM to Handset” or “From Handset to SIM”.
Note
•When you insert the SIM/USIM card into your phone for the first
time and start the Phonebook application, the confirmation
screen is displayed automatically, asking you if you wish to copy
or not. The number of Phonebook entries to be copied varies
depending on the SIM/USIM capacity.
•If the memory space is not enough to save all entries, you cannot
complete copying.
Sending a Phonebook Entry
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Send Phonebook”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “As Message”
For details, see “MMS” on page 51.
For “Via Bluetooth”
For details, see “Bluetooth” on page 106.
For “Via Infrared”
For details, see “Infrared” on page 108.
Receiving a Phonebook Entry
When the phone receives a Phonebook entry, a confirmation
message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Phonebook. Press [No] to
reject.
Manage Groups
Different ringtones can be set for each category.
“Call Manager”
→
“Manage Groups”
1. Highlight the desired category.
2. Press [Options] and select “Assign Tone/Video”.
3. Select “For Voice Call” or “For New Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “Sound Gallery”.
6. Select the desired tone or video clip.
(M 8-10-1)
(M 8-4)
Call Manager 41
Editing the Category Name
“Call Manager”
→
“Manage Groups”
1. Highlight the desired category name.
2. Press [Edit] and select “Edit Name”.
3. Modify the name.
Speed Dial List
Setting Phonebook Entries in the Speed Dial List
“Call Manager”
→
“Speed Dial List”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Assign].
To Edit the Speed Dial List
“Call Manager”
→
“Speed Dial List”
1. Highlight the entry you wish to edit.
2. Press [Change].
Memory Status
“Call Manager”
→
“Advanced”
→
“Memory Status”
(M 8-6)
(M 8-10-2)
42 Multimedia
Multimedia
Streaming Player
You can play back video clip files while downloading them from the
mobile network.
You can also register the address of the Web site as a bookmark.
“Multimedia”
→
“Streaming Player”
1. Select “Last Played”, “Enter URL”, “Favourites”, “Access
Log" or “Settings”.
“Last Played”: Shows the last streaming file.
“Enter URL”: Enter the desired address of the Web site.
The browser opens, starts downloading
and plays back.
“Favourites”: The address of the Web site is registered.
“Access Log”: Shows a log of the Web sites you have
accessed.
“Settings”: The backlight and display size settings.
Video Player
Playing Back the Last File
“Multimedia”
→
“Video Player”
→
“Last Played Video”
Playing Back Video Clip Files
“Multimedia”
→
“Video Player”
→
“My Videos”
1. Select “All Videos” or the desired playlist.
2. Select the desired file.
To pause playback, press B.
To stop playback, press U.
Searching a File to Be Played Back
“Multimedia”
→
“Video Player”
→
“My Videos”
1. Select “All Videos” or the desired playlist.
2. Press [Options] and select “Search”.
3. Enter a few letters of the title.
Search results are displayed in alphabetical order and the
matching file is highlighted. The search will match the entered
text with any part of the title.
Adding a File to the Playlist
“Multimedia”
→
“Video Player”
→
“My Videos”
1. Select “All Videos” or the desired playlist.
2. Highlight the file you wish to add to the playlist.
3. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a playlist,
see “Adding a New Playlist” on page 43.
(M 7)
(M 7-1)
(M 7-3)
(M 7-3-1)
(M 7-3-2)
Multimedia 43
4. Select the desired playlist.
The file highlighted in step 2 is saved.
To delete files from the playlist, highlight the file in the playlist
and press [Options]. Then select “Delete from Playlist”.
Adding a New Playlist
“Multimedia”
→
“Video Player”
→
“My Videos”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
3. Press B.
Note
•To delete the playlist, highlight the playlist and press [Options].
Then select “Delete Playlist”.
Settings
“Multimedia”
→
“Video Player”
→
“Settings”
1. Select from “Playback Pattern”, “Backlight”, “Display Size”
or “Sound Effects”.
2. Select from the following:
• “Playback Pattern” (“Normal”, “Repeat”, “Repeat All”,
“Random”)
• “Backlight” (“Always On”, “Always Off”, “Normal Settings”)
When “Normal Settings” is selected, the backlight works
with the main backlight setting (p. 90).
• “Display Size” (“Normal”, “Enlarge”, “Full Screen”, “Wide
Screen”, “Cinema Screen”)
• “Sound Effects” (“Normal”, “Bass”, “Surround”, “Surround
Bass”, “Loud-Wide”, “Karaoke”, “Rock”, “Hall”, “Hiphop”)
Downloading Video Clip Files
“Multimedia”
→
“Video Player”
→
“Download Videos”
The video clip file download site is displayed.
Music Player
Music player supports MP3, MPEG-4 and 3GPP format sound files.
Creating a New Playlist
“Multimedia”
→
“Music Player”
→
“My Music”
→
“Playlists”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
Note
•To delete the playlist, highlight the playlist and press [Options].
Then select “Delete Playlist”.
•You can create up to 99 playlists.
(M 7-3-4)
(M 7-4)
44 Multimedia
Playing Back Sound Files
“Multimedia”
→
“Music Player”
→
“My Music”
1. Select the item you wish to play back.
• “All Music”: All sound files are displayed.
• “Artists”: The names of all artists are displayed.
• “Albums”: The names of all albums are displayed.
• “Playlists”: All playlists are displayed.
2. Select the desired sound file.
To pause playback, press B.
To stop playback, press F and go back to standby, then press
F again. Select “Yes” when the pop-up appears.
Note
•Select “Music” to update the list of available music tracks.
•You are asked whether or not to play sounds when the Silent
mode is activated.
•To play the last played file, select “Last Played Music”. “Currently
Playing” is displayed when a file is being played back.
•When you receive a call, playback of the current file is paused,
and you can receive the call. After the call ends, select “Currently
Playing” to resume playback.
Sorting Files
“Multimedia”
→
“Music Player”
→
“My Music”
→
“All
Music”
1. Press [Options] and select “Sort”.
2. Select “By Title”, “By Artist”, “By Album”, “By Genre” or
“By Rating”.
Sort results are displayed.
Adding a File to the Playlist
“Multimedia”
→
“Music Player”
→
“My Music”
→
“All
Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a playlist, see
“Creating a New Playlist” on page 43.
3. Select the desired playlist.
The file highlighted in step 1 is saved.
To delete files from the playlist, highlight the file in the playlist
and press [Options]. Then select “Delete from Playlist”.
Note
•
You can store up to 99 files in one playlist. However, the total
number of files stored on your phone cannot exceed 350 files.
Downloading Music Files
“Multimedia”
→
“Music Player”
→
“Download Music”
The music file download site is displayed.
(M 7-4-3)
Camera 45
Camera
Taking Pictures
“Camera”
1. Press B to take the picture.
The shutter sounds and the still image of the taken picture is
displayed.
2. Press B to save the picture.
The taken picture is saved in Gallery.
To cancel, press [Cancel].
To send the taken picture, press C in step 2.
Note
•When the video camera is launched, press C.
•When you try to send a picture that has too large a file size, the
picture size is resized for the message. The original sized picture
is saved in Gallery.
Recording Video Clips
“Camera”
The preview is displayed on the screen.
When in photo camera mode, press C to switch to video camera
mode.
1. Press B.
2. To stop recording, press B.
3. Select “Save”.
The video clip is saved in Gallery.
To view the preview before saving, select “Preview”.
To send the video clip, select “Send”.
For further procedures, see “Creating a New Message” on
page 51.
Note
•You can only send video clips when “For Message” is selected
for the recording time. For details, see “Selecting the Recording
Time and Picture Size” on page 50.
Common Functions in the Photo and
Video Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. Press a or b.
Once the phone has returned to standby, the zoom settings
return to default.
(M 5)
46 Camera
Adjusting the Exposure
“Camera”
→
[Options]
→
“Shooting Settings”
→
“Exposure”
“Camera”
→
[Options]
→
“Record Settings”
→
“Exposure”
1. Press d (Bright) or c (Dark).
: (Dark → Normal → Bright)
Once the phone has returned to standby, the brightness
settings return to default.
Switching the Focus Mode
“Camera”
→
[Options]
→
“Shooting Settings”
→
“Focus”
“Camera”
→
[Options]
→
“Record Settings”
→
“Focus”
1. Select the desired option.
: Auto Focus
: Manual Focus
:Macro
Selecting the Picture or Video Quality
Select the appropriate option.
“Camera”
→
[Options]
→
“Picture Quality”
“Camera”
→
[Options]
→
“Video Quality”
1. Select the desired picture or video quality.
: Super Fine
:Fine
:Normal
Note
•The better quality you select, the larger the file size becomes.
Using the Self-Timer
“Camera”
→
[Options]
→
“Self-timer”
1. Select “2sec”, “5sec” or “10sec”.
When you select one of these options, the corresponding
indicator (“ ”, “ ”, or “ ”) is displayed on the screen.
Select “Off” to cancel the self-timer.
Selecting the Storage Memory
“Camera”
→
[Options]
→
“Settings”
→
“Save New
Pictures”
“Camera”
→
[Options]
→
“Settings”
→
“Save New Videos”
1. Select the desired location from “To Handset Memory”, “To
Memory Card” or “Choice”.
Note
•If you select “Choice”, select the desired location every time you
save.
Auto Save
“Camera”
→
[Options]
→
“Settings”
→
“Auto Save”
1. Select “On” or “Off”.
Using the Help Function
“Camera”
→
[Options]
→
“Help”
Camera 47
Mobile Light
“Camera”
→
[Options]
→
“Mobile Light”
1. Select the desired mode.
“On” ( ): The light is always on.
“Auto” ( ): The light turns on if the phone detects that the
conditions are dark.
“Low Light” ( ) (photo camera mode only):
Select this mode for macro shooting.
“Off”: The light is always off.
The corresponding indicator is displayed on the screen. Select
“Off” to turn it off.
Switching between the Photo and Video Camera Modes
You can switch between the photo and video camera modes by
pressing C.
Common Shortcut Keys
Note
•The “Switches the display modes” option is available in
“Preview” before you save a video clip. See “Recording Video
Clips” on page 45.
Photo Camera Video Camera
DFocus Lock
GFocus
HSwitches Viewfinder
between with and without
indicators
Switches the display modes
in the Preview screen
JSave New Pictures Save New Videos
KPicture Size
LScene Microphone
MPicture Quality Video Quality
NSelf-timer
OZoom Max/Min
QHelp
RMobile Light
48 Camera
Functions in Photo Camera Mode
Selecting the Picture Size
You can select the size of pictures. All taken pictures are saved in
the JPEG format.
“Camera”
→
[Options]
→
“Picture Size”
1. Select the desired size.
1536 × 2048 dots/1080 × 1920 dots/
1200 × 1600 dots/960 × 1280 dots/
480 × 854 dots/480 × 640 dots/
240 × 320 dots/120 × 160 dots/
1536 × 864 dots/854 × 480 dots
Continuous Shoot
“Camera”
→
[Options]
→
“Modes”
→
“Continuous Shoot”
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”: The continuous shoots are cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures continuously.
After selecting this mode, select from
“Fast”, “Normal”, “Slow” or “Manual”.
“Overlapped” ( ): Overlaps continuous pictures into one
picture and makes an afterimage.
After selecting this mode, select “Fast” or
“Normal”.
Note
•When you select “Manual” to take continuous pictures, press B
manually at the desired speed.
•You cannot use the Continuous Shoot function for picture sizes
larger than 480
×
640 dots. “9 Pictures” and “Overlapped” are
not available for picture sizes larger than 240
×
320 dots.
Taking Panorama Pictures
“Camera”
→
[Options]
→
“Modes”
→
“Panorama/
Scanner”
→
“Panorama”
1. Select “On” and press B.
2. Move the phone slowly to keep the + mark aligned with the
assisting lines, and press B.
3. Select “Save”.
Note
•The image is captured automatically if the bar in the lower right
turns blue before B is pressed in step 2.
To Set the Assisting Lines
“Camera”
→
[Options]
→
“Settings”
→
“Panorama
Settings”
→
“Assisting Lines”
1. Select “On” or “Off”.
Note
•An error message is displayed if you move the phone fast when
taking panorama pictures with this setting on.
Camera 49
To Set the AE-Lock
When this setting is enabled, the exposure setting is fixed for the
same brightness level.
“Camera”
→
[Options]
→
“Settings”
→
“Panorama
Settings”
→
“AE-Lock”
1. Select “Enable” or “Disable”.
Scanning Images
“Camera”
→
[Options]
→
“Modes”
→
“Panorama/
Scanner”
→
“Scanner”
1. Select a picture size.
2. Press B.
3. Move the phone slowly to scan, and press B.
4. Select “Save”.
Selecting the White Balance
“Camera”
→
[Options]
→
“Shooting Settings”
→
“White
Balance”
1. Select from “Auto”, “Daylight”, “Cloud/Shade”, “Tungsten”
or “Fluorescent”.
Camera Effects
You can select from various camera effects.
“Camera”
→
[Options]
→
“Modes”
→
“Camera Effects”
1. Select from “Sepia”, “Monochrome” or “Negative”.
Note
•You cannot use the Camera Effects function for picture sizes
larger than 240
×
320 dots.
Selecting a Frame
“Camera”
→
[Options]
→
“Modes”
→
“Add Frame”
1. Select “Preset Frames” or “Picture Gallery”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press B.
Note
•Images larger than 240 dots [W]
×
320 dots [H] cannot be used.
Selecting the Scene
“Camera”
→
[Options]
→
“Scene”
1. Select from “Auto”, “Night”, “Sports”, “Text”, “Pet”,
“Against Sun” or “Portrait”.
Using the Full Screen
“Camera”
→
[Options]
→
“Settings”
→
“Display
Indicators”
→
“Full Viewfinder”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal Viewfinder”.
50 Camera
Selecting the Shutter Sound
“Camera”
→
[Options]
→
“Settings”
→
“Shutter Sound”
1. Select the desired shutter sound from 3 preset patterns.
To play back the shutter sound, press [Play] in step 1.
Note
•Continuous Shoot uses the specialised shutter sound that cannot
be changed using the above settings.
•The shutter sound remains active even when “General Volume”
(p. 91) is set to “Silent” to prevent unauthorised use.
Functions in Video Camera Mode
Selecting the Recording Time and Picture Size
“Camera”
→
[Options]
→
“Record Time”
1. Select “For Message”, “Extended Video” or “SD VIDEO”.
For Message ( ): Limits the size to send a message
depending on service providers.
Extended Video ( ): Less than 30 minutes (depending on
the memory).
SD VIDEO ( ): Records in SD VIDEO format.
2. Select the desired picture size.
If “For Message” is selected, select “QCIF(176×144)” or
“SubQCIF(128×96)”.
If “Extended Video” is selected, select “VGA(640×480)”,
“Wide(400×240)”, “QVGA(320×240)”, “HQVGA(240×176)”,
“QCIF(176×144)” or “SubQCIF(128×96)”.
If “SD VIDEO” is selected, select “VGA(640×480)” or
“QVGA(320×240)”.
Note
•If you select “For Message” for the recording time, the file size is
limited depending on the service provider. Therefore, the quality
is also limited for the setting.
•“Save and Send” is not displayed after recording in the Extended
Video mode.
Recording Video Clips with Sound
To record a video clip with sound, the microphone needs to be
activated.
“Camera”
→
[Options]
→
“Microphone”
1. Select “On” or “Off”.
Note
•The microphone is already turned on in the default setting. Select
“Off” to record a video clip without the sound.
•The file size of a video clip can be reduced if the sound is not
recorded.
Video Encoding
“Camera”
→
[Options]
→
“Settings”
→
“Video Encode”
1. Select the appropriate format.
Messages 51
Messages
Your phone allows you to send and receive text, multimedia and
Email. It is compatible with most POP3 Email providers.
SMS
SMS allows you to send text messages up to 765 characters long.
If you send a message of more than 160 characters, it is split into
several segments.
MMS
With MMS, you can send images, sound or video to brighten
someone’s day. Messages of up to 300 KB with images, sound, or
video clips can be sent and received.
Email
Email allows you to send messages of up to 300 KB.
Note
•Some MMS functions may not always be available depending on
your network. Contact your service provider for more information.
•Maximum message size varies depending on the restrictions set
by the service provider.
Creating a New Message
(SMS/MMS)
“Messages”
→
“Create Message”
→
“Message”
(Email)
“Messages”
→
“Create Message”
→
“Email”
1. Select the recipient field.
2. Select the desired method to enter the recipient’s details.
3. For MMS, enter or select the Email address or phone
number from the Phonebook. For SMS, enter or select a
phone number. For Email, enter or select an Email address.
• To add multiple Email addresses or phone numbers,
highlight the recipient field, press [Options], and select “Edit
Recipient” and then select “Add Recipient”. Enter or select
the Email address or phone number from the existing
Phonebook.
• To change the recipient types, press [Options], select “Edit
Recipient” and highlight the desired recipient. Press
[Options] and select “Change to To”, “Change to Cc” or
“Change to Bcc”.
• To add a subject, highlight the subject field and press B.
Then enter the subject in the subject entry screen and press
B.
4. Place the cursor in the message field.
5. Press B to display the message entry screen.
Enter the message and press B.
(M 4) (M 4-1)
52 Messages
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
After the message is sent, the message is moved to the Sent
box.
Note
•When you create an SMS message, the mode is automatically
switched to MMS in the following cases:
•When an Email address is entered in the recipient field.
•When a subject is entered.
•When the size of entered text has exceeded the SMS size limit.
To Add a Slide Show
1. Perform steps 1 to 5 in “Creating a New Message” on
page 51.
2. Press [Options] and select “Add Slide”.
3. Select “Add Slide After” or “Add Slide Before”.
4. Enter another message.
If you wish to set the duration of each slide, highlight your
message or other inserted item such as a picture or sound file.
Press [Options] and select “Slide Duration”, then select the
desired duration. Repeat steps 2 to 4 to add more slides.
To Attach Data
1. In step 6 in “Creating a New Message” on page 51, press
[Options] and select “Insert Item”.
2. Select “Picture”, “Sound”, “Video”, “Attach Contact”,
“Attach Appointment” or “Others”.
When selecting “Attach Contact” or “Attach Appointment”, go
to step 4.
3. Select the desired option and then select the desired file.
If you wish to attach pictures, sounds or video clips that are
saved, select “Saved Picture”, “Saved Sound” or “Saved
Video”.
If you wish to take new pictures, record sounds or video clips,
select “Take Picture”, “Record Voice” or “Record Video”.
4. Select the desired data.
If you wish to select your own Phonebook entry, select “My
Card”.
When attaching an appointment, select the desired day
including a schedule entry you wish to add and select the
desired schedule entry.
Note
•When attaching JPEG files, select the appropriate resize option,
as the maximum message size for sending varies depending on
the service provider.
Messages 53
To Remove Attachments
1. In step 6 in “Creating a New Message” on page 51, highlight
the desired item, press [Options] and then select “Remove
Item”.
Using the Sending Options
1. Press [Options] and select “Messaging Settings”.
• “Delivery Report” (“On”, “Off”) (SMS/MMS): Enables or
disables Delivery Report when the message is successfully
sent to the recipient.
• “Expiry Time” (“Maximum”, “1 hour”, “12 hours”, “1 day”,
“1 week”) (SMS/MMS): Sets Expiry Time for a message to be
saved in the server.
• “Priority” (“High”, “Normal”, “Low”): Prioritises composed
messages.
• “Read Report” (“On”, “Off”) (SMS/MMS): Confirms whether
or not a report is sent notifying the sender that the message
has been read.
2. Press [Options] and select “Send”.
After the message is sent, the message is moved to the Sent
box.
Note
•The current message size displayed while you are creating the
message is an approximation.
•If a message cannot be sent for some reason, the message stays
in the Outbox and the “ ” is displayed in standby.
Sending a Message in the Drafts Box
(SMS/MMS)
“Messages”
→
“Message”
→
“Drafts”
(Email)
“Messages”
→
“Email”
→
“Drafts”
1. Highlight the desired message.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Reading a Message
Messages you receive are saved in the Inbox.
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Select the message you wish to view.
54 Messages
Storing the Phone Number of a Sender in the Phonebook
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Highlight the message from which you wish to store the
phone number or Email address.
3. Press [Options] and select “Save Address”.
The new Phonebook entry screen including the phone number
is displayed. For details on creating a new Phonebook entry,
see “Adding a New Entry” on page 37.
Calling the Phone Number of a Sender Embedded in the
Message
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Highlight the message containing the phone number you
wish to dial.
3. Press [Options] and select “Call Sender”.
Downloading a Single MMS
“Messages”
→
“Message”
→
“Inbox”
1. Highlight the message alert ( ) you wish to download.
2. Press [Options] and select “Download”.
Replying to a Message or to All Addresses
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Highlight the message you wish to reply to.
3. Press [Options] and select “Reply” (to sender only) or “Reply
All” (to all other recipients listed in the original To or Cc lists).
4. Select “Reply” or “Reply with History”.
5. Enter the message.
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Messages 55
Forwarding a Message
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Highlight the message you wish to forward.
3. Press [Options] and select “Forward”.
4. Perform steps 1 to 6 in “Creating a New Message” on
page 51.
Sorting the Messages in the List
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Press [Options] and select “View Settings”.
3. Select “Sort”.
4. Select the desired sort option.
Cell Broadcasts
This function may not be available on all mobile phone networks.
Contact your service provider for more information.
Enabling/Disabling Cell Broadcasts
“Messages”
→
“Cell Broadcasts”
→
“Switch On/Off”
1. Select “On” or “Off”.
Reading Cell Broadcast Messages
“Messages”
→
“Cell Broadcasts”
→
“Read Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press U.
Setting Languages for Cell Broadcast Messages
“Messages”
→
“Cell Broadcasts”
→
“Settings”
→
“Language”
The current language is displayed.
1. Press B.
2. Highlight the desired language and press B to check.
3. Press [Save].
(M 4-6)
56 Messages
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you want.
“Messages”
→
“Cell Broadcasts”
→
“Settings”
→
“Set
Info Subjects”
1. Press B.
2. Highlight the desired subject and press B to check.
3. Press [Save].
Area Info
Enabling/Disabling Area Info
“Messages”
→
“Area Info”
1. Select “On” or “Off”.
Note
•This function may not be available on all mobile phone networks.
Contact your service provider for more information.
•If Area Info is set to “On”, the standby time will decrease.
Messaging Settings
General Settings
“Messages”
→
“Messaging Settings”
→
“General Settings”
1. Select the item you wish to set up.
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit” to edit
current signature.
• “Auto Delete”:
Deletes the oldest message automatically, when the Inbox,
Sent or Both (Inbox and Sent) is full.
• “Message List View”:
Switches the mailbox listing (“Two-line View”,
“Sender+Preview”, “Subjects+Preview”, “Sender”,
“Subjects”).
• “Scroll Unit”:
Scroll through messages by “Single Line”, “Half Page” or
“Whole Page”.
• “Message Type”:
Sets the type of message to send by default when a
message is composed. When set to “Free”, the message is
sent automatically either as an SMS or MMS as appropriate.
(M 4-7)
(M 4-8)
Messages 57
SMS Settings
“Messages”
→
“Messaging Settings”
→
“SMS Settings”
1. Select the item you wish to set up.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Automatic Resend”:
Tries to resend the failed SMS message up to two times
(“On” or “Off” selection).
• “Expiry Time”:
This indicates the number of days and hours for which a
message you send may remain undelivered to the message
recipient. During this period, the message service centre will
continually try to deliver the message to the recipient.
• “Message Centre”:
Enter the message centre number. Up to 2 numbers can be
registered.
If you wish to enter a country code for a message to an
international number, long press Q until a + sign is
displayed.
•“Reply Path”:
Enables or disables adding a reply path to the message.
• “Connection Type”:
Sets the preferred connection type (“GPRS Preferred”, “CSD
Preferred”).
MMS Settings
“Messages”
→
“Messaging Settings”
→
“MMS Settings”
1. Select the item you wish to set up.
• “MMS Accounts”:
Select the desired account or select “Create New” to enter
the following settings.
“Profile Name”: MMS profile name (unique name)
“Proxy”: Proxy setting for MMS
“Relay Server URL”: MMS relay server
•“Home Download”:
Controls the message download timing inside your network
area.
“Always Download”: Downloads messages immediately
from the server.
“Always Defer”: Defers message download.
• “Roaming Download”:
Controls the message download timing when roaming
outside of your network.
“Always Download”: Downloads messages immediately
from the server.
“Always Defer”: Defers message download.
• “Delivery Report”:
Enables or disables Delivery Report request.
58 Messages
• “Automatic Resend”:
Tries to resend the failed SMS message up to two times
(“On” or “Off” selection).
• “Delivery Report Allow”:
Confirms whether or not a report is sent notifying the sender
when you receive a message.
• “Read Report”:
Enables or disables Read Report request.
• “Read Report Allow”:
Enables or disables Read Report Allow when the recipient is
required to inform the sender that the message has been
read.
• “Expiry Time”:
This indicates the number of days and hours for which a
message you send may remain undelivered to the message
recipient. During this period, the message service centre will
continually try to deliver the message to the recipient.
•“Slide Duration”:
Sets the duration of the slide.
• “Slide Auto Play”:
Enables or disables Slide Auto Play.
• “Send File Settings”:
Sets whether or not to send and save the file settings.
• “Max Message Size”:
Sets the maximum message size for sending and disables
sending MMS messages exceeding that size.
• “Creation Mode”:
When set to “Free”, you can attach files of any format to the
mail. When set to “Restricted”, only certain formats and
message sizes can be attached. The “Restricted” setting has
priority over “Max Message Size”.
•“Hide Number”:
Sets whether to show or hide the sender’s address.
• “Delivery Time” (“Immediate”, “1 hour”, “12 hours”, “1
day”, “1 week”):
Sets the time the message is delivered after the Send key is
pressed.
•“Anonymous Rejection”:
Enables or disables the rejection of messages from
anonymous senders.
To Activate the MMS Account Profile
1. Select “MMS Accounts”.
2. Select the desired profile you wish to activate.
Messages 59
Email Settings
“Messages”
→
“Messaging Settings”
→
“Email Settings”
To Set an Email Account
1. Select “Email Accounts” and highlight the preset Email
account.
You can also create a new account.
2. Press [Options] and select “Edit”.
3. Select the item you wish to set up.
“Account Name”: Email account name (unique name)
“Incoming Server”: Server name, user ID, password, port
number, APOP authentication and
encryption for the incoming server
“Outgoing Server”: Server name, user ID, password, port
number, SMTP authentication and
encryption for the outgoing server
“Access Point”: Access point for Email
“Email Address”: Email address
“Advanced Settings”: Your name, signature, download interval,
download configuration, maximum
download limit, save sent messages
To Activate the Email Account Profile
1. Select “Email Accounts”.
2. Select the desired profile you wish to activate.
60 Browser
Browser
Your phone is already configured to access the mobile Internet.
Your phone uses GPRS, it has a system that is faster than previous
ways of getting mobile information. Also, the connection is ‘always
on’ which means there is no need to wait for dialling up. You only
have to pay for the data you send or receive, not how long you’re
connected.
Your phone contains a WAP/Web browser used for surfing on the
mobile Internet, where you can get a lot of useful information.
Normally, pages are designed for a mobile phone.
Main Menu
“Browser”
→
“Homepage”
The browser page is displayed.
“Browser”
→
“Go to URL”
The URL entry screen is displayed. You can type in the URL of a site
directly.
“Browser”
→
“Bookmarks”
See page 61.
“Browser”
→
“Alert Inbox”
WAP Push alerts are displayed.
“Browser”
→
“My Saved Page”
You can view all the screenshots that have been saved onto the
handset memory.
“Browser”
→
“Access History”
The history of pages you have recently browsed is displayed.
“Browser”
→
“Browser Settings”
See page 61.
Navigating a WAP or Web Page
•a b c d: Moves the highlight around in the screen.
•A: Launches the option menu if it has not been
launched.
Used to select an option from the option
menu.
•B: Executes the highlighted item in the screen.
•C: Opens the browser when in standby.
Moves to previous page when the browser is
active.
•F(short press): Exits the browser.
(long press):Turns off the phone.
(
M 2
)
Browser 61
Editing Bookmarks
“Browser”
→
“Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following options:
(When a bookmark is highlighted)
“Edit”: Edits URL address of the bookmark.
“Add New Bookmark”: Creates new bookmarks.
“Create Folder”: Creates new folders.
“Open in New Tab”: Opens a bookmark in a new tab.
“Send”: Sends the URL address to recipients.
“Move”: Moves bookmarks to another location
or into a folder.
“Details”: Displays detailed information of the
WAP/Web page.
“Delete”: Deletes a bookmark.
“Delete All”: Deletes all bookmarks.
(When a folder is highlighted)
“Add New Bookmark”: Creates new bookmarks.
“Create Folder”: Creates new folders.
“Move”: Moves folder and bookmarks in the
folder to another location.
“Rename Folder”: Renames the folder.
“Delete”: Deletes the folder and bookmarks in
the folder.
“Delete All”: Deletes all folders and bookmarks.
(When there are no bookmarks)
“Add New Bookmark”: Creates new bookmarks.
“Create New Folder”: Creates new folders.
Browser Settings
“Browser”
→
“Browser Settings”
“Font Size”: Sets the font size for browsing.
“Scroll Settings”: Sets the speed of scrolling.
“Cursor Settings”: Sets whether or not to show the cursor,
and its speed.
“Downloads”: Sets whether or not to show images
when accessing the WAP/Web page.
“Memory Operation”: Clears Cache, Cookies, or
Authentication information.
“Security Settings”: Adjusts the security prompt level.
“Download to”: Sets the preferred download location.
“Zoom Factor”: Sets the zoom ratio for viewing a page.
“Zoom Area”: Sets the window size for displaying
enlarged specific area.
“WAP Push”: Sets whether you need confirmation
for push message.
“Initialized Browser”: Initializes the browser settings and
memory.
“Reset Settings”: Resets all the browser settings to the
default settings.
(M 2-3)
(M 2-7)
62 Browser
Browser Options when Online
C
→
[Options]
“Home”: Goes to the homepage.
“Alert Inbox”: Displays WAP push alert.
“Forward”: Goes to the next page.
“Open This Frame”: Opens the selected frame.
(This option is available only when a
frame page is displayed.)
“Bookmarks”: See page 61.
“My Saved Page”: Displays all the browser screenshots
saved in the handset memory.
“Copy Text”: Copies the text on the WAP/Web
page.
“Reload Page”: Reloads the WAP/Web page to get
updated information.
“Go to URL”: Allows you to type in the URL of a
site directly. Handset browser will go
to the WAP/Web page that you
entered.
“Save Items”: Saves items from the browsing
pages.
“Complete Page Display”: Allows the browser to display in
complete page mode or Virtual
Screen mode.
“Convenient Functions”: Displays functions for page
operation.
“Access History”: Shows the history where you have
browsed.
“Flash®Menu”: Displays Flash® menu. (This option
is available only when a Flash® file
is displayed.)
“SVG Menu”: Displays SVG menu. (This option is
available only when a SVG file is
displayed.)
“Tab Menu”: Displays the tab menu. (This option
is available only when two or more
windows are opened.)
“Settings”: Displays the settings menu.
“Help”: Displays the Help screen.
“Exit”: Exits the browser.
Gallery 63
Gallery
Gallery contains all your pictures, music and videos. You can also
transmit pictures, sounds and video clips via infrared or
Bluetooth
wireless technology to other OBEX-enabled devices.
Picture Gallery
Viewing Pictures
“Gallery”
→
“Picture Gallery”
1. Select the file you wish to view.
The selected picture is displayed.
Note
•To switch between viewing handset or memory card content,
select the first item in the options menu.
Using Images as Wallpaper
“Gallery”
→
“Picture Gallery”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Editing Pictures
“Gallery”
→
“Picture Gallery”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Edit”.
3. Select “Picture Editor” or “Composite”.
4. Select the desired option.
Note
•“Picture Editor” may not be available depending on the original
picture and copyright issued.
Saving an Image to Phonebook Entries
This option can only be used for pictures saved in the handset
memory.
“Gallery”
→
“Picture Gallery”
1. Highlight the file you wish to add to Phonebook.
2. Press [Options] and select “Add to Contacts”.
To overwrite, select the data you wish to save.
To save as a new entry, select “<As New Contact>”.
Downloading Picture Files
“Gallery”
→
“Picture Gallery”
→
“Download Pictures”
The picture file download site is displayed.
Video Gallery
Playing Back Video Clip Files
“Gallery”
→
“Video Gallery”
1. Select the file you wish to play back.
To pause playback, press B.
To resume, press B again.
To stop playback, press U.
(
M 6
)
(M 6-1)
(M 6-2)
64 Gallery
Note
•To switch between viewing handset or memory card content,
select the first item in the options menu.
Using a Video Clip as a Ring Video Clip
You can set your video clip to play back when the phone rings.
“Gallery”
→
“Video Gallery”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
Downloading Video Clip Files
“Gallery”
→
“Video Gallery”
→
“Download Videos”
The video clip file download site is displayed.
SD VIDEO
Video clips with the “ASF” format that are recorded by a video
camera or downloaded from mobile Internet sites can also be
managed with SD VIDEO.
“Gallery”
→
“SD VIDEO”
1. Select the desired file.
To pause playback, press B.
To resume, press B again.
To delete a file, highlight the file, press [Options] and select
“Delete”.
Note
•In order to manage video clips with SD VIDEO, perform recording
as follows:
[Options]
→
“Record Time”
→
“Extended Video”
→
“QVGA(asf)”.
Sound Gallery
The downloaded sound files and the AMR data recorded by Voice
Recorder are managed in Sound Gallery. The default ringtones are
not contained within Sound Gallery. Only the sound files that can be
played back on the phone are stored in Sound Gallery.
Playing Back Sound Files
“Gallery”
→
“Sound Gallery”
1. Select the file you wish to play back.
To stop playback, press U.
Note
•Playback may not be available for some sound files.
•To switch between viewing handset or memory card content,
select the first item in the options menu.
Using the Sound Files as a Ringtone
“Gallery”
→
“Sound Gallery”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
(M 6-3)
(M 6-4)
Gallery 65
Downloading Sound Files
“Gallery”
→
“Sound Gallery”
→
“Download Sounds”
The sound file download site is displayed.
Themes
You can easily customise the display by using the theme files.
Viewing Previews
“Gallery”
→
“Themes”
1. Highlight the theme file you wish to preview.
2. Press B.
The selected theme file is displayed.
Note
•To switch between viewing handset or memory card content,
select the first item in the options menu.
Setting Theme
“Gallery”
→
“Themes”
1. Select the desired theme file.
The selected theme file is set as the default theme.
Downloading Theme Files
“Gallery”
→
“Themes”
→
“Download Themes”
The theme file download site is displayed.
Other Documents
Opening a Document File
“Gallery”
→
“Other Documents”
1. Select the desired file.
Note
•To switch between viewing handset or memory card content,
select the first item in the options menu.
Flash®
Playing Back Flash® Files
“Gallery”
→
“Flash®”
1. Select the file you wish to play back.
To stop playback, press U.
Using Images as Wallpaper
“Gallery”
→
“Flash®”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Using the Sound Files as a Ringtone
“Gallery”
→
“Flash®”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
(M 6-6)
(M 6-8)
(M 6-9)
66 Gallery
Common Option Menus
Gallery contains the following folders.
“Gallery”
→
“Picture Gallery”
“Gallery”
→
“Video Gallery”
“Gallery”
→
“SD VIDEO”
“Gallery”
→
“Sound Gallery”
“Gallery”
→
“Books”
“Gallery”
→
“Themes”
“Gallery”
→
“Java™ Gallery”
“Gallery”
→
“Other Documents”
“Gallery”
→
“Flash®”
Activating Files with Copyright Protection (DRM)
Some pictures, sound files, video clips and theme files have a
digital copy protection program, which is called DRM (Digital Rights
Management). You need to activate the digital licence permission
to open the files. Files protected with DRM are displayed with .
1. Select the appropriate folder for the desired file type.
2. Highlight the file you wish to activate.
3. Press [Options] and select “Get Contents Key”.
Note
•Some pictures with DRM may not be opened even when an
attempt is made to activate it.
Sending Gallery Data
1. Select the appropriate folder for the desired file type.
2. Highlight the desired file.
3. Press [Options] and select “Send”.
4. Select “As Message”, “As Email”, “Via Bluetooth”, “Via
Infrared” or “Send via IrSS”.
Note
•Pictures/Sounds/Video clips protected by copyright cannot be
sent attached to a message, with the exception of Separate
Delivery files.
•When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving Gallery Data
When the phone receives Gallery data, a confirmation message is
displayed in standby.
1. Press [Yes].
The received data is saved in the corresponding Gallery folder.
Gallery 67
Using Gallery Data
1. Select the appropriate folder for the desired file type (p. 66).
2. Highlight the desired file.
3. Press [Options] and select “Manage Items”.
4. Select the desired option.
“Sort”: Sorts files according to a specific
sequence.
“Rename”: Renames the file or folder. Select the
desired file or folder to rename.
“Create Folder”: Creates a new folder.
“Change List View”: Changes the list view.
“Check All”: Selects all files in the list.
“Delete all”: Deletes all files in the folder.
Note
•“Manage Items” is not available for “Java™ Gallery”.
To Delete the File
1. Select the appropriate folder for the desired file type (p. 66).
2. Highlight the desired file.
3. Press [Options] and select “Delete”.
To See the Gallery Details
1. Select the appropriate folder for the desired file type (p. 66).
2. Highlight the file you wish to view the details of.
3. Press [Options] and select “Details”.
Selecting Multiple Files
Note
•The following procedure applies except when the “Download
More” is highlighted.
1. Select the appropriate folder for the desired file type (p. 66).
2. Highlight the file you wish to select.
3. Press [Options] and select “Check”.
4. Repeat steps 2 and 3 until you select all the desired files.
Memory Status
Handset Memory: Applications, Pictures, Videos, Sounds,
Themes, Flash®, Others, Total and Free
Memory Card: Pictures, Videos, Sounds, Themes, Flash®,
Others, Total and Free
“Gallery”
→
“Memory Status”
1. Select “Handset Memory” or “Memory Card”.
(M 6-10)
68 Java™
Java™
Java™ Gallery
Downloading Applications
“Java™”
→
“Java™ Gallery”
→
“Download More”
1. Select the desired application.
Before downloading the application you are asked to confirm
what you are about to receive. After checking the information
on the confirmation screen, the application can be
downloaded.
2. Press B to start downloading.
3. Press B when finished.
Note
•User authentication may be required before downloading the
application on some information screens.
Executing Applications
“Java™”
→
“Java™ Gallery”
1. Select the title of the application you wish to execute.
The selected application is executed. When using network
connection type applications, connection to the network can be
selected.
2. To end the application, press F and select “End”.
Setting as a Screensaver for the Display
“Java™”
→
“Java™ Gallery”
1. Highlight the file you wish to use as a screensaver.
2. Press [Options] and select “Set as Screensaver”.
Setting Permission
You can set permission for selected Java™ applications.
“Java™”
→
“Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Permission”.
3. Select one of the following options:
“Phone Call”: Sets permission to make voice calls.
“Network Access”: Sets permission to access the network.
“Messaging”: Sets permission to perform SMS
messaging.
“Bluetooth Conn.”: Sets permission to connect via
Bluetooth
.
“Local Connection”: Sets permission to connect to local
devices.
“Read User Data”: Sets permission to read user data, such
as Phonebook entries, mailbox (Inbox)
and Gallery data.
“Write User Data”: Sets permission to write entries in your
phone, such as Phonebook entries,
mailbox (Inbox) and Gallery data.
(M 1)
(M 1-1)
Java™ 69
“Use Multimedia”: Sets permission to use the multimedia
recording.
“Location Access”: Sets permission to send location
information.
4. Select one of the following options:
“Ask Once”: The confirmation message is displayed
the first time network access is executed.
“Always Ask”: The confirmation message is displayed
every time network access is executed.
“Never Ask”: The confirmation message is not
displayed while execution of network
access is authorised.
“No”: Execution of network access is not
authorised.
Note
•To clear all the permission settings, select “Reset Settings” in
step 3.
•Some permissions are not available for some Java™
applications.
•“Bluetooth Conn.”, “Read User Data” and “Write User Data” may
not be available in step 3.
Viewing Application Information
“Java™”
→
“Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Deleting an Application
You can delete an application in the folder.
“Java™”
→
“Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Delete”.
Java™ Settings
Application Volume
When the profile is set to “Silent”, the “General Volume” setting
(p. 91) has priority.
“Java™”
→
“Java™ Settings”
→
“Application Volume”
1. Press a (or d) to increase the volume or press b (or c)
to decrease the volume and then press B.
Backlight
“Java™”
→
“Java™ Settings”
→
“Backlight”
→
“Switch On/Off”
1. Select from “Always On”, “Always Off” or “Normal
Settings”.
“Always On”: Lit while the application is operated.
“Always Off”: Unlit while the application is operated
even if a key is pressed.
“Normal Settings”: Works with the main backlight setting
(p. 90).
(M 1-2)
70 Java™
To Set the Blinking Operation
If set to “Off”, the backlight cannot be turned on from the
application.
“Java™”
→
“Java™ Settings”
→
“Backlight”
→
“Blink”
1. Select “On” or “Off”.
Vibration
“Java™”
→
“Java™ Settings”
→
“Vibration”
1. Select “On” or “Off”.
Calls & Alarms
“Java™”
→
“Java™ Settings”
→
“Calls & Alarms”
1. Select “Voice Call”, “Incoming Messages”, “Alarm” or
“Start Request.”.
2. Select the desired method.
• “Call Priority”, “Message Priority”, “Alarm Priority” or
“Incoming priority”:
The application is suspended automatically, and you can
receive a call or a message, the alarm will sound or
Bluetooth
connection will start.
After finishing the call or receiving the message, or when the
alarm or
Bluetooth
connection ends, the suspend indicator
( ) is displayed letting you know there is a suspended
application.
• “Call Notice”, “Message Notice”, “Alarm Notice” or “Notice
of Incoming msg”:
The marquee (character scrolls) is displayed on the first line
of the screen while the application continues. If you press
D, the application is suspended, and you can receive the
call. After finishing the call or receiving the message, the
suspend indicator ( ) is displayed letting you know there is
a suspended application.
Set Java™ Wallpaper
To Switch the Java™ Wallpaper On or Off
“Java™”
→
“Java™ Settings”
→
“Set Java™ Wallpaper”
→
“Switch On/Off”
1. Select “On” or “Off”.
To Set the Activation Time
“Java™”
→
“Java™ Settings”
→
“Set Java™ Wallpaper”
→
“Activation Time”
1. Enter an activation time from 1 to 10 seconds (in 2 digits)
using the keypad.
Java™ 71
To Set the Suspend Time
“Java™”
→
“Java™ Settings”
→
“Set Java™ Wallpaper”
→
“Suspend Time”
1. Set the desired time period from “after 15 min.” to “after
6hours”.
Surround
You can set surround sound for Java™ applications.
“Java™”
→
“Java™ Settings”
→
“Surround”
1. Select “On” or “Off”.
Default Settings
“Java™”
→
“Java™ Settings”
→
“Set to Default”
1. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
Clearing All Memory
“Java™”
→
“Java™ Settings”
→
“Memory All Clear”
1. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
Java™ Information
“Java™”
→
“Java™ Information”
The information about the licences belonging to Java™ is
displayed.
(M 1-3)
72 Organiser
Organiser
Calendar
Creating a New Entry
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. Select the desired day to which you want to add an event.
2. Select “Add New Entry”.
3. Enter the subject.
4. Enter the start date and time.
5. Select the desired category.
6. Select the alarm time.
When selecting “Other”, enter the desired alarm date and time.
7. Press [Save].
Note
•If the date and time settings have not been entered, the date and
time entry screen is displayed (p. 93).
•The alarm will not sound when “General Volume” (p. 91) is set to
“Silent”.
•You can display the Stamp screen by pressing H in the
monthly or 3-month calendar view. Select the desired category
and press [Select].
To Change the Settings
1. Select the item you wish to change in the New Entry screen.
• “Alarm”: Sets options including “Alarm Time”,
“Assign Tone/Video” and “Duration” for
the reminder.
• “Repeat”: Sets the number of times the alarm
sounds.
• “Location”: Sets the location for the schedule entry.
• “Description”: Enables entering a memo for the
schedule entry.
• “Secret”: Sets to show or hide the schedule entry.
Set to “On” to make the data secret or
select “Off” to leave it as it is.
Viewing a Schedule Entry
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. Select the day you wish to view.
2. Select the desired entry.
(M 3)
(M 3-1)
Organiser 73
To Search by Date
1. In any view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to enter the
desired date.
Tip
•You can control the view by using the following:
Monthly, 2-month, 3-month or 6-month view
P: Displays the previous month.
R: Displays the next month.
Q: Displays the Help screen.
H: Displays the Stamp screen (monthly and 3-month
view only).
J: Displays the Set Colour screen.
K: Moves the cursor to today.
L: Displays the Find (By Subject) screen.
N: Displays the Go to (Enter Date) screen.
O: Displays the Find (By Category) screen.
c/d: Moves the cursor to left (the previous day) or to right
(the next day).
a/b: Moves the cursor upward (last week) or downward
(next week).
Weekly view
P: Displays the previous week.
R: Displays the next week.
Q: Displays the Help screen.
J: Displays the Set Colour screen.
K: Moves the cursor to today.
L: Displays the Find (By Subject) screen.
N: Displays the Go to (Enter Date) screen.
O: Displays the Find (By Category) screen.
c/d: Moves the cursor to left (the previous day) or to right
(the next day).
a/b: Moves the weekly view up or down (the previous hour
or next hour).
Setting a Colour
You can highlight a date or days of the week with seven colour
options.
“Organiser”
→
“Tools 1” tab
→
“Calendar”
For Date Colour
1. Press [Options] and select “Calendar Settings”.
2. Select “Set Colour”.
3. Select “By Date” and then select the desired day.
4. Select the desired colour.
74 Organiser
For Days of the Week Colour
1. Press [Options] and select “Calendar Settings”.
2. Select “Set Colour”.
3. Select “By Week” and then select days of the week you wish
to colour.
4. Select the desired colour.
Note
•If the same date is set with both a date colour and a day of the
week colour, the date is highlighted in the date colour.
•Up to 100 days can be set for the highlights.
Setting a Holiday
You can set personal holidays in the calendar.
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. Press [Options] and select “Calendar Settings”.
2. Select “Set Holiday”.
3. Enter the name.
4. Enter the date.
5. Select the desired frequency.
6. Press [Save].
Finding a Schedule Entry
To Search by a Subject
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. In any view, press [Options] and select “Find”.
2. Select “By Subject”.
3. Enter a few letters of the subject.
Search results are displayed in time order.
To Search by a Category
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. In any view, press [Options] and select “Find”.
2. Select “By Category”.
3. Select a desired category.
Search results are displayed in time order.
Editing a Schedule Entry
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. Select the day you wish to edit.
2. Highlight the entry you wish to edit, press [Options], then
select “Edit”.
3. Select the desired item and modify the entry.
4. Press [Save].
Organiser 75
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Select the desired option.
“This Appointment” (daily view):
Deletes the selected entry.
“All This Day”: Deletes all entries for the selected day.
“All This Month” (monthly view and 3-month view):
Deletes all entries for the selected month.
“All This 2Months” (2-month view):
Deletes all entries for the selected two
months.
“All This 6Months” (6-month view):
Deletes all entries for the selected six months.
“All This Week” (weekly view):
Deletes all entries for the selected week.
“Up to Last Month” (monthly view and 3-month view):
Deletes all entries before the selected month.
“Up to Last Week” (weekly view):
Delete all entries before the selected week.
“All Appointments”:
Deletes all entries in this application.
Sending a Schedule Entry
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. Select the day including schedule entries you wish to send.
2. Highlight the entry you wish to send, press [Options], then
select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 106.
For “Via Infrared”
For details, see “Infrared” on page 108.
Note
•When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving a Schedule Entry
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Viewing the Memory Status
1. In any view, press [Options] and select “Memory Status”.
76 Organiser
Alarms
Setting the Alarms
“Organiser”
→
“Tools 1” tab
→
“Alarms”
1.
Select the blank line (--:--) you wish to set an alarm to.
2. Enter the desired time.
3. Press [Save].
To Change the Settings
1. Select the item you wish to change in the Set Alarm screen.
• “Subject”:
Sets the subject for the alarm setting.
•“Repeat”:
Sets the number of times the alarm sounds.
• “Assign Tone/Video”:
Assigns a tone or video clip file to the alarm.
•“Snooze”:
Sets the snooze option.
• “Alarm Volume”:
Sets the desired volume.
The alarm will not sound when “Alarm Volume” is set to
“Silent”.
• “Vibration”:
Sets the vibration pattern of the alarm.
For details on selecting a vibration, see “Vibration” on
page 92.
•“Duration”:
Sets the duration of the alarm.
Resetting an Alarm
“Organiser”
→
“Tools 1” tab
→
“Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarms
“Organiser”
→
“Tools 1” tab
→
“Alarms”
1. Select “Clear All”.
Setting for Silent Mode
You can set whether to sound the alarm when the profile is set to
“Silent”.
“Organiser”
→
“Tools 1” tab
→
“Alarms”
→
“Settings”
1. Select “For Silent profile”.
2. Select “Ring” or “Do not Ring”.
Setting the Alarm to the World Clock Time
You can set the alarm to sound according to the time of the World
Clock.
“Organiser”
→
“Tools 1” tab
→
“Alarms”
→
“Settings”
1. Select “Link to World Clk”.
2. Select “On” or “Off”.
(M 3-2)
Organiser 77
Tasks
Creating a New Entry
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and time.
4. Press [Save].
Note
•If the date and time settings have not been entered, the date and
time entry screen is displayed (p. 93).
To Select the Reminder Time
1. On the New Entry screen, select “Reminder”.
2. Select “Reminder Time”.
3. Select the reminder time.
When selecting “Other”, enter the desired reminder date and
time.
To Change the Type of Alarm Tone or Video Clip File
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Preset Sounds”, “Sound Gallery”, “Video Gallery” or
“Flash®”.
4. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a Ringtone for
an Incoming Call” on page 91.
To Change the Duration of Alarm Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the desired duration.
To Set the Alarm Volume
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Alarm Settings”.
2. Select “Alarm Volume”.
3. Press a to increase the volume or press b to decrease the
volume and then press B.
To Set the Vibration
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Alarm Settings”.
2. Select “Vibration”.
3. Select “On”, “Link to Sound” or “Off”.
To Set for the Silent Mode
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Alarm Settings”.
2. Select “For Silent Profile”.
3. Select “Ring” or “Do not Ring”.
(M 3-3)
78 Organiser
To Set the Priority
1. On the New Entry screen, select “Priority”.
2. Select “Normal”, “High” or “Low”.
To Change the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the task entry.
To Mark the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to mark the data secret or select “Off” to leave
it as it is.
To Unlock the Secret Settings Temporarily
You can show the secret tasks temporarily.
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Highlight the desired entry.
2. Press [Options] and select “Unlock Temporarily”.
Note
•Once the phone has returned to standby, the temporarily
unlocked tasks are reset as secret data.
Marking the Entry as Completed or Uncompleted
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Highlight the desired entry.
2. Press [Options] and select “Done”.
To make the entry incomplete, select “Not Yet”.
Finding a Task Entry
To Search by a Subject
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Find”.
2. Select “By Subject”.
3. Enter a few letters of the subject and press B.
Search results are displayed in time order.
To Search by a Due Date
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Find”.
2. Select “By Due Date”.
3. Select a desired due date and press B.
Search results are displayed in time order.
Sending a Task Entry
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 106.
For “Via Infrared”
For details, see “Infrared” on page 108.
Organiser 79
Note
•When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Viewing the Memory Status
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Memory Status”.
Deleting Entries
“Organiser”
→
“Tools 1” tab
→
“Tasks”
→
[Options]
→
“Delete”
1. Select the desired option.
“This Task”: Deletes the selected entry.
“All Completed Tasks”: Deletes all entries marked as
“Completed” .
“All Tasks”: Deletes all entries.
Calculator
“Organiser”
→
“Tools 1” tab
→
“Calculator”
Key operations for calculation are as follows:
To enter a decimal point, press P.
To clear the entered number or function, press U.
To do the calculations, press B.
To start a new calculation, press U.
(M 3-4)
80 Organiser
Rate Conversion
To Set a Currency Conversion Rate
“Organiser”
→
“Tools 1” tab
→
“Calculator”
→
[Options]
→
“Currency Converter”
→
“Exchange Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the currency conversion rate.
To Convert a Value
“Organiser”
→
“Tools 1” tab
→
“Calculator”
1. Enter the value to be converted.
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to Foreign”.
Expenses Memo
Recording in the Expenses Memo
“Organiser”
→
“Tools 1” tab
→
“Expenses Memo”
→
“Add
New Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals
“Organiser”
→
“Tools 1” tab
→
“Expenses Memo”
→
“Totals”
Recorded expenses are displayed on the screen.
To Change Category
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Category”.
3. Select the desired category.
To Change Amount
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
To Delete a Recorded Item or All Items
1. In the total view, highlight the desired item.
2. Press [Options] and select “Delete Item” or “Delete All”.
Editing the Category Name
“Organiser”
→
“Tools 1” tab
→
“Expenses Memo”
→
“Edit
Category”
1. Select the desired category name.
2. Modify the name.
(M 3-5)
(M 3-5-1)
(M 3-5-2)
(M 3-5-3)
Organiser 81
Stopwatch
You can store 4 lap times when using the stopwatch function.
“Organiser”
→
“Tools 2” tab
→
“Stopwatch”
1. Press [Start].
Press [LAP] to view the lap time before the stopwatch stops.
Last 4 lap times are saved.
2. Press [Stop].
Resetting Time
1. After stopping the stopwatch, press [Options] and select
“Reset”.
Countdown Timer
“Organiser”
→
“Tools 2” tab
→
“Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press [Start].
Press [Suspend] to pause the countdown.
Press [Resume] to continue counting.
3. When the countdown has finished, press [Stop] and then
press [Start] to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and select
“Edit”.
2. Modify the desired time.
World Clock
Setting the Time Zone
“Organiser”
→
“Tools 2” tab
→
“World Clock”
1. Press [Edit] and select “Set Time Zone”.
The current time zone is indicated by red line on the world map.
2. Press c or d to change the time zone.
3. Press B.
To Set the Custom Time Zone
“Organiser”
→
“Tools 2” tab
→
“World Clock”
1. Press [Edit] and select “Set Time Zone”.
2. Press [Original].
3. Enter the desired city name and time difference.
Setting Daylight Saving
“Organiser”
→
“Tools 2” tab
→
“World Clock”
1. Press [Edit] and select “Daylight Saving”.
2. Select “On” or “Off”.
(M 3-
d
-1)
(M 3-
d
-2)
(M 3-
d
-3)
82 Organiser
Hour Minder
Hour Minder function informs you of the time by sounding a tone.
“Organiser”
→
“Tools 2” tab
→
“Hour Minder”
1. Select “Switch On/Off”.
2. Select “On” or “Off”.
3. Select “Select Time”.
4. Select the desired time.
5. Select “Save”.
To Change the Settings
“Organiser”
→
“Tools 2” tab
→
“Hour Minder”
1. Select “Advanced”.
2. Select the item you wish to change.
“Assign Tone/Video”: Sets the tone or video.
“Volume”: Sets the volume of the tone.
“Vibration”: Sets the vibration.
“Duration”: Sets the duration.
“For Silent Profile”: Sets whether to sound the tone when
the profile is set to “Silent”.
“Link to World Clk”: Sets to sound the tone according to the
time of the World Clock.
Document Viewer
You can view PC documents.
“Organiser”
→
“Tools 3” tab
→
“Document Viewer”
1. Select the file you wish to view.
To cancel reading, press U or C.
Note
•You can view the following types of files with the document
viewer: PDF (.pdf), Microsoft Excel (.xls), Microsoft Word (.doc),
Microsoft PowerPoint (.ppt).
•For the shortcut keys that can be used in the document viewer,
refer to the help by pressing [Options] and selecting “Help”.
•A file of up to 10 MB can be opened.
•Some files may not be displayed correctly depending on the type
or size, such as a file of vertical text (not supported) or when the
memory runs out while viewing a large document.
•Document files that are saved in Gallery, linked in a WAP/Web
page or attached in a message can be viewed with the document
viewer.
(M 3-
d
-4) (M 3-
d
-
d
-1)
Organiser 83
Text Templates
You can register up to 50 text templates for use in text messages
and multimedia messages. The maximum capacity of the text
templates is 256 characters.
Adding Phrases to Text Templates
“Organiser”
→
“Tools 3” tab
→
“Text Templates”
→
“Add
New Template”
1. Enter the text.
2. Select the desired category.
Editing Text Templates
“Organiser”
→
“Tools 3” tab
→
“Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
To view the text template, press B.
To delete the text template, press [Options] and select
“Delete”.
3. Modify the text and press B.
Changing the Category
“Organiser”
→
“Tools 3” tab
→
“Text Templates”
1. Highlight the desired text template.
2. Press [Options] and select “Change Category”.
3. Select the desired category.
Sending Text Templates
“Organiser”
→
“Tools 3” tab
→
“Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 106.
For “Via Infrared”
For details, see “Infrared” on page 108.
Voice Recorder
The recorded voice clip is saved in Sound Gallery. Voice clips are
saved in .amr format.
Recording a Voice Clip
“Organiser”
→
“Tools 3” tab
→
“Voice Recorder”
1. Press B to start recording.
To stop recording before the recording time is over, press B.
2. Select “Save” to save the voice clip.
Note
•Press a (or V) or b (or W) to adjust the sound volume when
playing back the recorded file.
(M 3-
d
-
d
-2)
(M 3-
d
-
d
-3)
84 Organiser
Sending Voice Clips
“Organiser”
→
“Tools 3” tab
→
“Voice Recorder”
1. Press B to start recording.
To stop recording before the recording time is over, press B.
2. Select “Save and Send”.
Selecting the Record Time
“Organiser”
→
“Tools 3” tab
→
“Voice Recorder”
→
[Options]
→
“Record Time”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, voice clips are automatically
saved in the memory card.
Selecting Storage Memory
“Organiser”
→
“Tools 3” tab
→
“Voice Recorder”
→
[Options]
→
“Save Recording to”
1. Select the desired location.
When selecting “Choice”, you can select the location when
saving a voice clip.
Scanner
With the built-in digital camera, you can read texts and barcodes in
JAN format and QR codes, and create QR codes. The scanned data
can be saved as a URL, Email address and text.
Note
•When scanning does not take place, it may be due to one of the
following reasons: type or size of barcode, scratches, dirt,
damage, print quality, light reflection, etc.
Reading Barcodes
“Organiser”
→
“Tools 3” tab
→
“Scanner”
→
“Scan
Barcode”
1. Display the barcode using the camera.
2. Press B.
3. Press [Options] and select the desired option.
The options vary depending on the scanned data.
“Open Link”: The browser opens the URL.
“Copy URL”: The URL is copied.
“Save”: The URL is saved.
“Send Message”: The result is sent as SMS or MMS.
“Copy”: The result is copied.
To Use the Continuous Scanning
1. In scanning mode, press [Options] and select “Continuous
Scan”.
2. Select “On” or “Off”.
(M 3-
d
-
d
-4)
Organiser 85
Opening a Barcode Picture
“Organiser”
→
“Tools 3” tab
→
“Scanner”
→
“Open
Barcode”
1. Select the desired picture data for barcode.
Viewing the Scanned Data
“Organiser”
→
“Tools 3” tab
→
“Scanner”
→
“Scanned
Results”
1. Highlight the data you wish to view, then press B.
Creating QR Codes
“Organiser”
→
“Tools 3” tab
→
“Scanner”
→
“Create QR
Code”
1. Select the desired option.
“Text Input”: Create a QR code using the text you
enter.
“Gallery”: Create a QR code using the Gallery data.
2. Enter the desired text or select the desired data, then press
B.
3. Press B to save.
Scanning Text
“Organiser”
→
“Tools 3” tab
→
“Scanner”
→
“Scan Text”
1. Display text using the camera.
2. When the bar under the scanned text is blue, press B.
3. Press a or b to select the desired text, then press B.
4. Press [Options] and select the desired option.
“Select/Edit”: The scanned result can be modified.
“Change Mode”: The scanned result can be converted to a
web address, mail address, phone
number or to roman text.
To Use Reversed Text
1. In scanning mode, press [Options] and select “Reversed
Text”.
2. Select the desired option from “Auto”, “Normal” or
“Reversed”.
Phone Help
“Organiser”
→
“Tools 3” tab
→
“Phone Help”
1. Press a or b.
(M 3-
d
-
d
-5)
86 SIM Application
SIM Application
You can refer to the information on the SIM/USIM card. Contact
your service provider for further details.
(M 10)
Settings 87
Settings
Phone Settings
Setting a Profile
There are 4 profiles: “Normal”, “Car”, “Silent” and “Original”.
Activating a Profile
“Settings”
→
“Phone Settings” tab
→
“Profiles”
1. Select the desired profile.
Note
•When a profile is set, the corresponding indicator described on
page 20 is displayed in standby.
Resetting Profile Settings
“Settings”
→
“Phone Settings” tab
→
“Profiles”
1. Highlight the profile you wish to reset.
2. Press [Options] and select “Reset”.
3. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
Event Light
“Settings”
→
“Phone Settings” tab
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Edit”.
3. Select “Event Light”.
4. Select the desired option.
“For Voice Call”: Flashes when an incoming voice call is
received.
“For New Message”: Flashes when a new message is
received.
“Java Start”: Flashes when
Bluetooth
notification is
received.
“Delivery Report”: Flashes when a delivery report is
received.
Status Light
“Settings”
→
“Phone Settings” tab
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Edit”.
3. Select “Status Light”.
4. Select the desired option.
“For Missed Call”: Flashes when an incoming voice call is
missed.
“For New Message”: Flashes when a new message is
missed.
“Java Start”: Flashes when
Bluetooth
notification is
missed.
“Delivery Report”: Flashes when a delivery report is
missed.
(M 9)
88 Settings
Any Key Answer
For details, see page 24.
“Settings”
→
“Phone Settings” tab
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Edit”.
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
Setting the Display
You can change the display settings.
Setting the Wallpaper
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Wallpaper”
1. Select “Vertical” or “Horizontal”.
2. Select the folder in which the picture you wish to set is
contained.
Pictures can be selected from “Preset Pictures”, “Picture
Gallery”, “Flash®”, “Slide W paper” or “Other Documents”.
3. Select the desired picture.
4. After displaying the picture, press B.
Note
•Some pictures cannot be used because of their picture and data
types.
•Wallpaper can be linked to a theme. Select “Link to Theme” in
step 2.
Assigning Pictures
To Set Built-in Pictures
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Assign Pictures”
1. Select the desired function to set the picture to.
2. Select “Preset Animation” when you select “Power On” or
select “Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when you select
“Incoming” or “Alarm” in step 1.
To Set Saved Pictures
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Assign Pictures”
1. Select the desired function to set the picture to.
2. Select “Picture Gallery”.
3. Select the desired picture.
4. After displaying the picture, press B.
5. Specify the area you wish to display using the navigation
keys, then press B.
Note
•Some pictures cannot be used because of their picture and data
types.
(M 9-2-1)
(M 9-2-2)
Settings 89
Setting the Font
To Set the Font Size
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Font Settings”
1. Select “Font Size”.
2. Select the desired font size.
To Set the Font Weight
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Font Settings”
1. Select “Font Weight”.
2. Select the desired font weight.
Setting the Standby Display
You can set the standby screen display.
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Standby Display”
1. Select “Clock/Calendar”, “Standby Window”, “Display
icons” or “Show Operator Name”.
Setting the Vivid Mode
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Vivid Mode”
1. Select the desired mode.
Setting the Greeting Message
You can set the message which is displayed when the phone is
turned on.
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Greeting Message”
1. Select “Switch On/Off” and then select “On” or “Off”.
Setting the External Display
To Select the Backlight Time Out
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“External Display”
→
“Duration”
1. Select the desired time out.
Select “Off” to shut the backlight off.
To Set the Message
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“External Display”
→
“Messages”
1. Select “Display” or “Not Display”.
To Set the Date & Time
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“External Display”
→
“Display Date & Time”
1. Select the desired display format for the date and time.
(M 9-2-3)
(M 9-2-4)
(M 9-2-5)
(M 9-2-6)
(M 9-2-7)
90 Settings
To Set the Clock Type
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“External Display”
→
“Clock Type”
1. Select the desired clock type.
To Set Incoming Indication
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“External Display”
→
“Caller Display”
1. Select “On” or “Off”.
Backlight
You can specify a desired time to elapse before the backlight shuts
off, which will help conserve battery life.
To Select the Backlight Time Out
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Backlight”
→
“Time Out”
1. Select the desired time.
Select “Off” to shut it off.
When selecting “Other”, enter the desired time.
To Adjust the Brightness of the Backlight
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Backlight”
→
“Brightness”
1. Press a (Light) and b (Dark) to switch between 5 levels of
clarity.
2. Press B.
Setting the Display Saving
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Display Saving”
1. Select the desired time.
When you purchase this phone, Display Saving is set to 2
minutes.
Note
•Display Saving does not work while you are using WAP or an
application.
•To cancel the Display Saving: The display saving continues until
either a key is pressed or there is an incoming alert. The first key
press only cancels this function. You must press another key in
order to enter any numerical or text value.
Setting the Dial Number
“Settings”
→
“Phone Settings” tab
→
“Display Settings”
→
“Dial Number”
1. Select the desired type of dial number.
Themes
“Settings”
→
“Phone Settings” tab
→
“Themes”
1. Select “Preset Themes” or “My Themes”.
2. Select the desired theme file.
(M 9-2-8)
(M 9-2-9)
(M 9-2-10)
(M 9-3)
Settings 91
Sound Settings
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
Volume
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
1. Select “Volume”.
2. Select “For Incoming Call”, “For New Message”, “Java
Start”, “Delivery Report” or “General Volume”.
3. Press a (or d) to increase the ringer volume or press b
(or c) to decrease the ringer volume and then press B.
To select “Silent”, press b (or c) at level 1.
Assigning a Ringtone for an Incoming Call
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
1. Select “Ringtone/Ringvideos”.
2. Select “For Voice Call”.
3. Select “Preset Sounds”, “Sound Gallery” or “Flash®
Ringtones”.
4. Highlight the ringtone you wish to use.
To hear the demo play, press [Play].
5. Press B.
Note
•Even if you delete a sound that is being used as a ringtone, the
setting remains the same and the default ringtone sounds.
•Melodies can be selected from “Sound Gallery”, “Preset Sounds”
or “Flash® Ringtones”.
Assigning a Ring Video Clip for an Incoming Call
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
1. Select “Ringtone/Ringvideos”.
2. Select “For Voice Call”.
3. Select “Video Gallery”.
4. Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select “Play”.
5. Press B.
Notification
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
1. Select “Ringtone/Ringvideos”.
2. Select “For New Message”, “Java Start” or “Delivery
Report”.
3. Select “Assign Tone”.
4. Select the desired folder.
5. Highlight the desired ringtone or ring video clip.
6. Press B.
7. Select “For New Message”, “Java Start” or “Delivery
Report”.
8. Select “Set Play Point”.
9. Select the desired play point.
10. Select “For New Message”, “Java Start” or “Delivery
Report”.
(M 9-4)
92 Settings
11. Select “Duration”.
12. Enter the desired duration of message notification in 2 digits
using the digit keys.
Keypad Tones
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
→
“System Sounds”
→
“Keypad Tones”
1. Select the desired tone pattern.
Warning Tone
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
→
“System Sounds”
→
“Warning Tone”
1. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound Gallery”.
For “Duration”, select the desired time.
Power On/Off Sound
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
→
“System Sounds”
1. Select “Power On Sound” or “Power Off Sound”.
2. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound Gallery”.
For “Duration”, enter the desired duration of sound in 2 digits
using the digit keys.
Handset Open/Close Sound
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
→
“System Sounds”
1. Select “Handset Open” or “Handset Close”.
2. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound Gallery”.
For “Duration”, select the desired time.
Charge Full
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
→
“System Sounds”
→
“Charge Full”
1. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound Gallery”.
For “Duration”, select the desired time.
Vibration
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
→
“Vibration”
1. Select “For Incoming Call”, “For New Message”, “Java
Start” or “Delivery Report”.
2. Select “Switch On/Off” and then select “On” or “Link to
Sound” to activate.
3. Select “Vibration Pattern” and then select the desired
vibration pattern.
Surround Sound
“Settings”
→
“Phone Settings” tab
→
“Sound Settings”
1. Select “Surround”.
2. Select “On”, “Link to Sound” or “Off”.
Settings 93
Date & Time
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Set Date/Time”
1. Enter the day, month, year and time using the digit keys.
To Set Daylight Saving
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Daylight Saving”
1. Select “On” or “Off”.
To Set the Time Zone
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Set Time Zone”
1. Press c or d to select the home city to set.
2. Press B.
To Customise the Time Zone
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Set Time Zone”
1. Press [Original].
2. Enter the city name.
3. Enter the time-zone differences using the digit keys.
Press a or b to switch between − and +.
4. Press B.
World Clock
For details, see page 81.
To Select the Time Format
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Time Format”
1. Select “24 Hour” or “12 Hour”.
To Select the Date Format
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Date Format”
1. Select from “D-M-Y”, “M-D-Y” or “Y-M-D”.
To Select the Calendar Format
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Calendar Format”
1. Select “Sunday-Saturday” or “Monday-Sunday”.
Language Setting
“Settings”
→
“Phone Settings” tab
→
“Language”
1. Select the desired language.
Note
•If you select “Automatic” in step 1, the language preset on the
SIM/USIM card is selected.
•If the language preset on the SIM/USIM card is not supported,
then the default language of the phone is selected.
(M 9-5)
(M 9-5-2)
(M 9-5-4)
(M 9-5-5)
(M 9-5-6)
(M 9-5-7)
(M 9-6)
94 Settings
Display Rotation
“Settings”
→
“Phone Settings” tab
→
“Display Rotation”
1. Select “Rotation 90°to”.
2. Select the desired function.
To Set for Answering Incoming Calls
“Settings”
→
“Phone Settings” tab
→
“Display Rotation”
1. Select “Answer calls”.
2. Select “Portrait: Answer call.”.
Setting the Sound Output
“Settings”
→
“Phone Settings” tab
→
“Switch ringtone
output”
1. Select “Earphone only” or “Earphone + speaker”.
Change Menu
“Settings”
→
“Phone Settings” tab
→
“Change Menu”
1. Select “Standard Menu” or “Large Font Menu”.
Security Settings
“Settings”
→
“Phone Settings” tab
→
“Security Settings”
Enabling/Disabling the PIN Code
If the PIN code is enabled, you are asked to enter the PIN code each
time the phone is switched on. Your PIN code is registered on the
SIM/USIM card and you should have been made aware of the code
when you purchased the SIM/USIM card. Contact your service
provider for further details.
Select “On” for “PIN Entry” and enter your PIN code if you wish to
activate the PIN lock.
Note
•If you enter the wrong PIN code three times, the SIM/USIM card
will lock. To remove the lock, contact your service provider or
SIM/USIM card vendor.
To Change the PIN Code
This allows you to change the PIN code registered on the SIM/USIM
card. Before you change the PIN code, select “On” for “PIN Entry”.
Enter the existing PIN code for “Change PIN” after selecting “PIN
Entry”, and enter a new PIN code twice.
To Change the PIN2 Code
PIN2 is a second PIN code used to unlock certain features of a SIM/
USIM card, such as Fixed Dialling and Call Cost metering. Not all
SIM/USIM cards use the PIN2 code. This menu may not be
displayed depending on the type of your SIM/USIM card.
Enter the existing PIN2 code for “Change PIN2”, and enter a new
PIN2 code twice.
(M 9-7)
(M 9-8)
(M 9-10)
(M 9-11)
Settings 95
Handset Lock
The Handset Lock prevents unauthorised use of the phone or
certain features on the phone when the power is turned on.
Select “On” for “Handset Lock” if you wish to activate the Handset
Lock.
Function Lock
By setting this option on, all the functions of your phone will be
locked until the correct handset code is entered.
Enter your handset code after selecting “Auto”, “Once”, “At Power
on” or “Off”.
To Turn Off the Function Lock
Enter your handset code in standby to turn the Function Lock off.
Phonebook Lock
The Phonebook Lock function prevents unauthorised use of your
Phonebook.
Select “On” to lock or “Off” to unlock for “Phonebook Lock” and
enter your handset code.
For details on the handset code, see “Change Handset Code”.
History Lock
The History Lock function prevents unauthorised access to Call Log
and sent/received mail records. By setting this option on, Call Log
and sent/received mail records cannot be viewed until the correct
handset code is entered.
Select “Call Log” or “Sent/Rcvd Msg.”, and then select “On” to lock
or “Off” to unlock.
Showing Secret Data
By setting this option on, the hidden data can be displayed.
Select “On” to display or “Off” to hide for “Show Secret Data”. Enter
your handset code when you select “On”.
For details on the handset code, see “Change Handset Code”.
Change Handset Code
The default handset code is “9999”.
Select “Change Handset Code” and enter the old handset code,
then enter a new handset code twice.
96 Settings
Master Reset
“Settings”
→
“Phone Settings” tab
→
“Master Reset”
→
“Reset Settings”
1. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
Note
•Some settings are not deleted by this function. Data stored in
Phonebook, etc. is not deleted.
To Reset All Settings for M1 to M12 and Delete All Created
Data
“Settings”
→
“Phone Settings” tab
→
“Master Reset”
→
“Reset All”
1. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
Call/Video Call
Voicemail & Diverts
This service can be used to divert incoming calls that you cannot
answer. Calls can be diverted to another phone number or to your
Voicemail system.
Note
•This service may not be available on all mobile phone networks.
Contact your service provider for more information.
To Access the Voicemail Centre
1. Long press G in standby.
To Activate the Voicemail Service
“Settings”
→
“Call/Video Call” tab
→
“Voicemail &
Diverts”
→
“Voicemail”
→
“Activate”
1. Select one of the following options:
“Always”: Diverts all calls without ringing.
“When Busy”: Diverts incoming calls while you are talking
on the phone.
“No Answer”: Diverts incoming calls if you do not answer
a call within a certain period of time.
“Not Reachable”: Diverts incoming calls when your phone
has no network service or is switched off.
If you select “No Answer”, select the period of time from 6
levels (05 to 30 seconds).
2. Press B.
(M 9-12)
(M 9-12-2)
(M 9-d-1)
Settings 97
To Activate the Diverts Service
Select the appropriate option.
“Settings”
→
“Call/Video Call” tab
→
“Voicemail &
Diverts”
→
“Diverts”
1. Select “Activate” or “By Service”.
If you select “By Service”, you can select further divert options.
2. Select from “Always”, “When Busy”, “No Answer” or “Not
Reachable”.
If you select “No Answer”, select the period of time from 6
levels (05 to 30 seconds).
3. Enter a phone number to which you wish to divert calls or
search for it in the Phonebook (p. 37).
4. Press B.
Note
•When “Voice Calls” diverts are set to “Always”, “ ” is displayed
in standby.
To Check the Diverts Status
“Settings”
→
“Call/Video Call” tab
→
“Voicemail &
Diverts”
→
“Status”
1. Select the diverts option you wish to check.
To Deactivate the Diverts Service
Select the appropriate option.
“Settings”
→
“Call/Video Call” tab
→
“Voicemail &
Diverts”
→
“Deactivate”
1. Select from “Always”, “When Busy”, “No Answer” or “Not
Reachable”.
2. Press B.
To Cancel the Diverts and Voicemail Service
“Settings”
→
“Call/Video Call” tab
→
“Voicemail &
Diverts”
→
“Cancel All”
Showing Your Number
“Settings”
→
“Call/Video Call” tab
→
“Show Your Number”
1. Select “On”, “Off” or “Status”.
Note
•Some networks do not support this service. Please check with
your service provider for availability.
(M 9-d-3)
98 Settings
Restrict Calls
To activate this option you will need the specified password, which
is available from your service provider.
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
“Outgoing Calls”: Restricts outgoing calls.
“Incoming Calls”: Restricts incoming calls.
2. Select one of the following options:
(For “Outgoing Calls”)
“Bar All Outgoing Calls”: Restricts all outgoing calls except
emergency calls.
“Bar International Calls”: Restricts all outgoing international
calls.
“Only Local & Home”: Restricts all outgoing international
calls except to your home country.
(For “Incoming Calls”)
“Bar All Incoming Calls”: Restricts all incoming calls.
“Bar if Abroad”: Restricts all incoming calls when you
are outside of the coverage from your
registered service provider.
3. Select one of the following options:
“All Services”: Restricts all services.
“Voice Calls”: Restricts all voice calls.
“Fax”: Restricts all fax calls.
“Messages”: Restricts all messages.
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
To Cancel Settings
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
Fixed Dialling Numbers
This option is available on most SIM/USIM cards for mobile phones.
It allows you to configure a SIM/USIM card so that it can only be
used to make calls to numbers on a predefined list.
Note
•This service depends on the SIM/USIM card.
To Enable Fixed Dialling Numbers
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“FDN”
1. Enter your PIN2 code.
2. Select “Switch On/Off”.
3. Select “On” to enable this function.
(M 9-d-4)
Settings 99
To Add a New Name
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“FDN”
1. Enter your PIN2 code.
2. Select “Edit Dial List”.
3. Select a blank field.
4. Add a name and a phone number.
For details on adding a name and phone number, see
“Adding a New Entry” on page 37.
5. Press [Save].
Rejecting an Incoming Call
To Reject the Registered Number
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“Rejected Numbers”
→
“Switch On/Off”
1. Select “On” or “Off”.
To Register the Rejected Number
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“Rejected Numbers”
→
“Set Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
Rejecting a Call when the Caller’s Number is Withheld
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“Withheld Call”
1. Select “On” or “Off”.
Changing the Network Password
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“Change N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to enter the
password again.
4. Press B.
Minute Minder
“Settings”
→
“Call/Video Call” tab
→
“Minute Minder”
1. Select “On” or “Off”.
Auto Answer
“Settings”
→
“Call/Video Call” tab
→
“Auto Answer”
1. Enter your handset code.
2. Select “Switch On/Off”.
3. Select “On” or “Off”.
(M 9-d-5)
(M 9-d-6)
100 Settings
To Set the Answer Time
“Settings”
→
“Call/Video Call” tab
→
“Auto Answer”
1. Enter your handset code.
2. Select “Answer Time”.
3. Enter the time from 1 to 30 seconds.
Call Waiting
Note
•This service may not be available on all mobile phone networks.
Contact your service provider for more information.
If you wish to be able to receive another incoming call while you
have a call in progress, you must activate the Call Waiting service.
“Settings”
→
“Call/Video Call” tab
→
“Call Waiting”
1. Select “On”, “Off” or “Status”.
Display Call Timer
“Settings”
→
“Call/Video Call” tab
→
“Display Call Timer”
1. Select “On” or “Off”.
Display Call Cost
“Settings”
→
“Call/Video Call” tab
→
“Display Call Cost”
1. Select “On” or “Off”.
Auto Redial
“Settings”
→
“Call/Video Call” tab
→
“Auto Redial”
1. Select “On” or “Off”.
Network Settings
To Select a Service Automatically
Each time the power is turned on, your phone selects a service
automatically.
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Select Service”
1. Select “Auto”.
To Select a Network Automatically
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Automatic”
To Select the Network Manually
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Manual”
1. Select the desired network.
(M 9-d-7)
(M 9-d-8)
(M 9-d-9)
(M 9-d-10)
(M 9-d-d-1)
Settings 101
To Add a New Network
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Add New Network”
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the network code (up to 3 digits).
4. Enter a new network name (up to 25 characters).
5. Enter either 2G (GSM) or 3G for the network type.
To Edit the Preferred List
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position, “Add to
end” to insert at the end or “Delete” to delete.
Showing the Network Information
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Network Information”
Information about the operator is displayed.
Off Line Mode
“Settings”
→
“Network Settings” tab
→
“Off Line Mode”
1. Select “On” or “Off”.
Internet Settings
Note
•In normal operations, you do not need to change the settings.
•Internet settings have already been entered in your phone
depending on your service provider. You may have restrictions on
viewing, deleting, copying or modifying the settings. Contact your
service provider for details.
Browser Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Browser Settings”
→
“Create New”
“Profile Name”: Browser profile name (unique name)
“Proxy”: Proxy setting for Browser (when “Use
Proxy” is On)
“Access Point”: Access point for Browser (when “Use
Proxy” is Off)
“Use Proxy”: Setting to connect by Proxy or not
“Home”: Home page URL (when “Use Proxy” is Off)
(M 9-d-d-2)
(M 9-d-d-3)
(M 9-d-d-3-1)
102 Settings
Java™ Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Java™ Settings”
→
“Create New”
“Profile Name”: Profile name for Java™ application
(unique name)
“Proxy”: Proxy setting for Java™ application
(when “Use Proxy” is On)
“Access Point”: Access point for Java™ application
(when “Use Proxy” is Off)
“Use Proxy”:
Setting to connect by Proxy or not
Streaming Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Streaming Settings”
→
“Create New”
“Profile Name”: Profile name for streaming (unique
name)
“Proxy Address”: Proxy address
“Proxy Port Number”: Port number (1-65535)
“Access Point”: Access point
Proxy Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Proxy Settings”
→
“Create New”
“Proxy Name”: Proxy name (unique name)
“Proxy Address”: IP address
“Access Point”: Access point
“Home”: Home page URL
“Port Number”: Port number (1-65535)
“
Authentication Type
”: Authentication type (“HTTP-BASIC” or
“HTTP-DIGEST”)
“User Name”: User name for authentication
“Password”: Password for authentication
Access Point Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Access Point Settings”
→
“Create New”
“Access Point Name”: Access point name (unique name)
“APN”: APN setting
“
Authentication Type
”: Authentication type (“NONE”, “PAP” or
“CHAP”)
“User Name”: User name for access point
“Password”: Password for access point
“DNS”: DNS (Domain Name System)
“Linger Time”: Linger Time (1-99999 sec.)
(M 9-d-d-3-2)
(M 9-d-d-3-3)
(M 9-d-d-3-4)
(M 9-d-d-3-5)
Settings 103
Re-provisioning Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Re-provisioning Settings”
→
“Execute
Pending”
Clearing DNS Cache
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Clear DNS Cache”
To Activate the Browser/Java™/Streaming Profile
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
1. Select “Browser Settings”, “Java™ Settings” or “Streaming
Settings”.
2. Select the desired profile you wish to activate.
To Edit/Copy/Delete the Browser/Java™/Streaming/Proxy/
Access Point Profile
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
1. Select “Browser Settings”, “Java™ Settings”, “Streaming
Settings”, “Proxy Settings” or “Access Point Settings”.
2. Highlight the desired profile.
3. Press [Options] and select the desired option.
“Edit”: Modify the desired item.
“Copy”: Enter the new file name.
“Delete”: Press [Yes] to delete.
(M 9-d-d-3-6)
(M 9-d-d-3-7)
104 Call Log
Call Log
The phone will record the last 30 missed calls, received calls and
dialled numbers.
Viewing Call Log
“Call Log”
1. Select from “All Calls”, “Dialled Numbers”, “Missed Calls”
or “Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press D to make a voice call.
Sending Messages
1. In the call log list, highlight the phone number or name you
wish to send a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a New
Message” on page 51.
Deleting a Call Log
1. In the call log list, press [Options] and select “Delete” or
“Delete All”.
Call Timers
Checking the Duration of the Last Call and All Calls
“Call Log”
→
“Call Timers”
1. Select “Received Calls” or “Dialled Calls”.
Resetting Call Timers
“Call Log”
→
“Call Timers”
→
“Clear Timers”
1. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
Call Costs
Some networks do not support Charging Advice. Please check with
your service provider for availability.
Checking the Cost of the Last Call
“Call Log”
→
“Call Costs”
→
“Last Call”
Checking the Total Call Cost
“Call Log”
→
“Call Costs”
→
“All Calls”
Setting the Charge Rate
“Call Log”
→
“Call Costs”
→
“Cost Units”
→
“Set Units”
1. Enter your PIN2 code.
2. Enter a currency unit (up to 3 characters).
3. Enter a cost per unit.
To enter a decimal point, press P.
Setting the Charge Limit
“Call Log”
→
“Call Costs”
→
“Max Cost”
→
“Set Limit”
1. Enter your PIN2 code.
2. Enter a value.
(M 11)
(M 11-5)
(M 11-5-3)
(M 11-6)
(M 11-6-1)
(M 11-6-2)
(M 11-6-5)
(M 11-6-6)
Call Log 105
Checking the Residual Credit
“Call Log”
→
“Call Costs”
→
“Residual Credit”
Resetting All Call Costs
“Call Log”
→
“Call Costs”
→
“Clear Costs”
1. Enter your PIN2 code.
Data Counter
“Call Log”
→
“Data Counter”
1. Select from “Last Data” or “All Data”.
Resetting All Data Counter
“Call Log”
→
“Data Counter”
→
“Clear Counter”
(M 11-6-3)
(M 11-6-4)
(M 11-7)
(M 11-7-3)
106 Connectivity
Connectivity
Bluetooth
Keep your phone within a distance of 10 metres from the devices
before searching.
Using the Bluetooth Wireless Function
To Turn On or Off the Bluetooth Wireless Function
“Connectivity”
→
“Bluetooth”
→
“Switch On/Off”
1. Select “On” or “Off”.
When “On” is selected, the
Bluetooth
wireless setting is
activated, and “ ” is displayed.
To Search for Devices to be Paired
A maximum of 16 devices can be searched for.
“Connectivity”
→
“Bluetooth”
→
“Search for Devices”
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
•You can search for devices even when the Bluetooth wireless
function is off. Once pairing is started, the phone turns the
Bluetooth wireless function on automatically.
•You can only select one device for pairing. To change the paired
device, see “To Activate the Paired Device” on page 106.
•Pairing means authentication has been established between the
two devices.
•In order to pair two devices with Bluetooth wireless technology,
the users should agree on the same passcode for both devices.
•The passcode is used only once, so there is no need to
remember it. The passcode can be different each time the
devices are connected.
•Devices that do not have a user interface (i.e., headsets and car
kits) have a factory-set passcode. See the user guide for the
device.
To Activate the Paired Device
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
To Check the Paired Handsfree Devices
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Highlight the desired handsfree device.
3. Press [Options] and select “Set prior Connect”.
To Check the Audio Device
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1. Press d twice to switch to the list for Audio devices.
2. Highlight the desired Audio device.
3. Press [Options] and select “Set prior Connect”.
(
M 12
)
(M 12-1)
(M 12-1-1)
(M 12-1-2)
Connectivity 107
To Rename or Delete the Paired Devices
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1. Press c or d to switch between all paired devices and
handsfree devices.
2. Highlight the desired device.
3. Press [Options].
4. Select “Change Name” or “Delete”.
You can rename or delete by pressing B after selecting
desired device.
To Send All Data to Other Devices
“Connectivity”
→
“Bluetooth”
→
“Send All”
1. Select the desired device.
If a device is not specified, searching starts automatically.
2. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
3. Select the desired data to send.
4. Enter the device passcode for unpaired devices.
Note
•If the handsfree device is connected, the confirmation screen to
deactivate the handsfree function is displayed. Press [Yes] to
deactivate.
Bluetooth Wireless Settings
To Rename Your Phone
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Device Name”
1. Enter the new device name.
To Show or Hide Your Phone
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Visibility”
1. Select the desired visibility settings.
“Show My Phone”: Allows other devices to recognise your
phone.
“Hide My Phone”: Hides your phone from other devices.
To Select the Sound Output
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Sound Output”
1. Select “Phone/Earphone” or “Bluetooth Device”.
To Switch the Handsfree Settings
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Handsfree Setting”
1. Select “Handsfree mode” or “Private mode”.
“Handsfree mode”: For talking with the handsfree kit
“Private mode”: For talking with the phone
(M 12-1-4)
(M 12-1-5)
108 Connectivity
To Set Java™ Application Request
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Java™ Application Request”
→
“Switch On/Off”
1. Select “On” or “Off”.
To View the Last Received Java™ Application Request
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Java™ Application Request”
→
“Latest Information”
To Turn Off Automatically
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Bluetooth Timeout”
1. Select the desired time.
Your phone turns the function off automatically after the
specified time.
To See Your Phone Details
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“My Phone Details”
Infrared
Keep your phone within a distance of 20 centimetres before
searching. The infrared setting will return to off when no data is
transmitted/received via infrared communication.
Turning On or Off
“Connectivity”
→
“Infrared”
→
“Switch On/Off”
1. Select “On” or “Off”.
The infrared setting is activated, and “ ” is displayed.
Sending All Data
“Connectivity”
→
“Infrared”
→
“Send All”
1. Enter your handset code.
The default handset code is “9999”. For details on changing
the handset code, see “Change Handset Code” on page 95.
2. Select the desired data to send.
3. Enter the authorisation code.
Mass Storage
“Connectivity”
→
“Mass Storage”
1. Press [Yes].
Note
•Activating Mass Storage mode also activates offline mode.
•Mass Storage is not available when the battery is low, a Java™
application is paused, music player is active, or a memory card
is not inserted in your phone.
USB Charge
“Connectivity”
→
“USB Charge”
1. Select “Enable” or “Disable”.
(M 12-2)
(M 12-3)
(M 12-4)
Connectivity 109
Card Settings
Formatting Memory Card
“Connectivity”
→
“Card Settings”
→
“Format Card”
1. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
2. Press [Yes] to start formatting.
Making a Backup File
With a memory card inserted in your phone, you can make backup
files of Bookmarks, Text, Phonebook entries, Calendar and Tasks in
the handset memory to the memory card. You can also restore the
backup data from the memory card.
“Connectivity”
→
“Card Settings”
→
“Backup/Restore”
→
“Backup”
1. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
2. Select the desired item to back up or “Select All” to back up
all files.
Restoring a Backup File
“Connectivity”
→
“Card Settings”
→
“Backup/Restore”
→
“Restore”
1. Enter your handset code.
For details on the handset code, see “Change Handset Code”
on page 95.
2. Select the desired item to restore or “Select All” to restore
all files.
3. Select the desired file to restore.
A confirmation message indicating deletion from the handset
memory is displayed.
4. Press [Yes] to start restoring.
Note
•To delete a backup file, highlight the desired item, press
[Options] and select “Delete” after performing steps 1 to 3.
(M 12-5)
(M 12-5-1)
110 Connecting SH9010C to Your PC
Connecting SH9010C to Your PC
You can use the following functions by connecting the SH9010C to
your PC using a USB data cable or via
Bluetooth
wireless
technology:
• GSM/GPRS modem
• Handset Manager for SH9010C
• Music Manager for SH9010C
• Sync Manager for SH9010C
System Requirements
Operating System:
Windows 2000*, Windows XP**, Windows Vista
*Service Pack 4 or later
** Service Pack 2 or later
Supported Software:
Microsoft Outlook/Outlook Express
Interface:
USB port or
Bluetooth
wireless port
CD-ROM drive
To use Music Manager, DirectX9 and Windows Media Player 9 or
later are required.
GSM/GPRS Modem
You can use SH9010C as a GSM/GPRS modem to access the
Internet from your PC. Connect your phone to your PC via
Bluetooth
wireless technology or USB interface. Software installation on your
PC is required.
Modem via the USB Data Cable
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SH9010C CD-ROM screen is displayed.
If the SH9010C CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select the USB driver from the on-screen instructions of
your CD-ROM, and start installation of USB driver software
following the on-screen instructions of your CD-ROM.
•
During installation, the on-screen instructions ask you to
connect your phone to your PC. Power on your phone and
atta
ch the phone to the USB port of your PC using the USB
data cable.
3. Follow the on-screen instructions to complete installation.
4. Select the modem driver from the on-screen instructions of
your CD-ROM, and install modem driver software following
the on-screen instructions of your CD-ROM.
5. Follow the on-screen instructions to use your phone as a
modem driver.
• When the on-screen instructions ask modem driver type,
select the cable as a modem driver.
Connecting SH9010C to Your PC 111
Modem via Bluetooth Connection
1. Turn on the
Bluetooth
wireless function of your phone.
For details, see “To Turn On or Off the Bluetooth Wireless
Function” on page 106.
2. Pair your PC with your phone.
For details on pairing your PC with your phone, see “To Search
for Devices to be Paired” on page 106.
3. Insert the CD-ROM into your PC’s CD-ROM drive.
The SH9010C CD-ROM screen is displayed.
If the SH9010C CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
4. Select the modem driver from the on-screen instructions of
your CD-ROM, and install modem driver software following
the on-screen instructions of your CD-ROM.
5. Follow the on-screen instructions to use your phone as a
modem driver.
• When the on-screen instructions ask modem driver type,
select
Bluetooth
as a modem driver.
Note
•Modem communication is not possible while communicating
with the Handset Manager via Bluetooth wireless technology or
USB interface.
•It is not recommended that you make or answer calls when you
are using SH9010C as a GSM/GPRS modem. The operation may
be interrupted.
•Your phone exhausts the battery when connected to a PC, even
when not communicating.
•For a detailed explanation on how to use the Modem driver,
please click and refer to the help on the Modem Driver.
Handset Manager
You can transmit the following items between your phone and your
PC, and can use Phonebook entries on your PC:
• Gallery files (pictures/sounds/video clips/Other Documents data)
• Phonebook entries
• Short messages
• Schedule entries
Via USB Data Cable
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SH9010C CD-ROM screen is displayed.
If the SH9010C CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen instructions of
your CD-ROM, and start installation of Handset Manager
software following the
on-screen instructions of your CD-ROM.
• If you have not installed the USB driver, follow steps 2 and 3
on page 110.
112 Connecting SH9010C to Your PC
3. Follow the on-screen instructions to complete installation.
• During installation, the on-screen instructions ask you to
select an interface. Select the USB data cable as an
interface.
4. Connect your phone to your PC. Power on your phone and
attach the phone to the USB port of your PC using the USB
data cable.
5. Select [Yes] for Mass Storage mode.
For details on activating this mode, see “Mass Storage” on
page 108.
6. Launch Handset Manager from the relevant folder.
7. Follow the on-screen instructions of Handset Manager.
Via Bluetooth
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SH9010C CD-ROM screen is displayed.
If the SH9010C CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen instructions of
your CD-ROM, and start installation of Handset Manager
software following the
on-screen instructions of your CD-ROM.
3. Follow the on-screen instructions to complete installation.
• During installation, the on-screen instructions ask you to
select an interface. Select
Bluetooth
as an interface.
4. Select [Yes] for Mass Storage mode.
For details on activating this mode, see “Mass Storage” on
page 108.
5. Launch Handset Manager from the relevant folder.
6. Follow the on-screen instructions of Handset Manager.
Note
•Some large files may not be able to be transmitted from the PC
to the phone.
•Applications (Camera, Gallery, etc.) do not run when the phone
is connected to the PC via Bluetooth wireless technology
interface or USB data cable.
•If you have already installed Sharp Handset Manager, you need
to uninstall the previous one.
•If you have trouble with installation, uninstall Handset Manager,
restart your PC, reinstall Handset Manager and restart.
Music Manager
You can manage the playlist and exchange sound files on your PC.
Available files are the sound files in the following formats: MP3,
AAC, 3GPP.
Connecting SH9010C to Your PC 113
Main Control Panel
Control all the main actions from here.
Play: Plays back a file.
Previous: Returns to the top portion of the current file.
Next: Jumps to the next file.
Search Media File: Searches a media file.
Browse: Browses all the media files sorted in Genre/
Artist/Album.
Input Window: Quickly finds the media files in Library or
the playlist with keyword entry.
Media Management in PC
Media files in PC can be easily explored in 2 main columns.
Add Playlist: Creates a new playlist.
Add Smart Playlist: Creates a new smart playlist.
Remove Playlist: Removes a playlist.
Media Management in Handset
Media files in Handset can be easily explored in 2 main
columns.
Previous Browse
Search Media File
Input Window
Media Management
in PC
Media Management
in Handset
Play
Next
Add Playlist
Add Smart Playlist
Remove Playlist
Main Control Panel
114 Connecting SH9010C to Your PC
• With the drag and drop operation, you can upload the sound files
and the playlists from your PC, and also download them to your
PC.
• With the drag and drop operation, you can change the order of
tracks in the playlist of your PC.
• You can create a new playlist and delete an existing playlist.
• With the drag and drop operation, you can add a sound file to a
playlist, and delete them from the playlist.
• You can edit the name of a playlist of your PC.
• You can edit the title, artist name, and album name of sound files
of your PC (only available in MP3 format).
Sync Manager
You can synchronise the following data with the data of Microsoft
Outlook or Outlook Express on your PC.
• Phonebook entries.
• Schedule entries.
Safety Precautions and Conditions of Use 115
Safety Precautions and Conditions of
Use
Your phone conforms to international regulations insofar as it is
used under normal conditions and in accordance with the following
instructions.
Conditions of Use
Electromagnetic waves
• Do not switch on your phone aboard an aircraft (as your phone
may interfere with the aircraft’s electronic systems). Current
legislation forbids this use and legal action can be taken against
the user.
• Do not switch on your phone in a hospital, except in designated
areas.
• Use of your phone’s function may affect the performance of
medical electronic units (pacemakers, hearing aids, insulin
pumps, etc.). When the phone function is on, do not bring it near
medical equipment or into areas in which medical equipment is
being used. If you have a hearing aid or a pacemaker, only use
the phone on the opposite side of your body from where it is
located. The phone should be kept at least 6 inches (15.24 cm)
from a pacemaker ANYTIME the phone is switched on.
• Do not switch on your phone near gas or flammable substances.
• Observe the rules concerning the use of mobile phones at
gasoline stations, chemical plants and at all sites where a risk of
explosion exists.
Caring for your phone
• Do not allow children to use your phone without supervision.
• Do not open or attempt to repair your phone yourself. The
product can only be repaired by authorised service personnel.
• Do not drop your phone or subject it to severe impacts. Bending
the body and pushing the display or keys with extreme force
could damage the phone.
• Do not use solvents to clean your phone. Use only a soft, dry
cloth.
• Do not carry your phone in your back pocket as it could break
when you sit down. The display is made of glass and is
particularly fragile.
• Avoid touching the external connector on the underside of the
phone, since the delicate components within can be damaged by
static electricity.
Mobile Light
Do not use Mobile Light near people’s faces.
Eyesight may be temporarily affected leading to accidents.
116 Safety Precautions and Conditions of Use
CAUTION
Use of controls, adjustments or performance of
procedure other than those specified herein may
result in hazardous radiation exposure. As the
emission level from Mobile Light LED used in
this product is harmful to the eyes, do not attempt to disassemble
the cabinet. Servicing is limited to qualified servicing station only.
Mobile Light LED Properties
a) Emission Duration: Continuous
b) Wavelength
White: 400-700 nm
c) Maximum Emission Output
White: 240 μW (1.2 mW inside handset)
Battery
• Use your phone only with batteries, chargers and accessories
recommended by the manufacturer. The manufacturer disclaims
any liability for damage caused by the use of other chargers,
batteries or accessories.
•Network configuration and phone usage will affect
talk-time and standby time.
Using the games or camera will hasten battery consumption.
•When the battery charging alert is displayed on the
screen, charge the battery as soon as possible. If you
continue using your phone ignoring the alert, the phone may
cease to function, and all data and settings you have stored may
be lost at any moment.
• Before removing the battery from the phone, make sure the
phone is switched off.
• Replace and charge the new battery as soon as possible after
removing the old one.
• Do not touch the battery terminals. Batteries can cause damage,
injury or burns if a conductive material touches exposed
terminals. When the battery is detached from the phone, use a
cover made of non-conductive material for keeping and carrying
the battery safely.
• Recommended temperature for using and storing batteries is
approximately 20qC.
• The batteries’ performance is limited in low temperatures,
particularly below 0qC and the phone may not work temporarily
regardless of the amount of remaining battery power.
CLASS 1
LED Product
EN60825-1:1994 A1:2002 & A2:2001
CAUTION-CLASS 1M
LED RADIATION WHEN OPEN
DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
Mobile Light
Safety Precautions and Conditions of Use 117
• Exposing the phone to extreme temperatures will shorten battery
life.
• The battery can be charged and discharged hundreds of times
but it will eventually wear out. When the operating time (talk-time
and standby time) is noticeably shorter than normal, it is time to
buy a new battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE, DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
See “Battery Disposal” on page 13.
Aerial Care
• Do not cover the top of the phone (p. 12, No. 23) with your hand
when in use as this may interfere with the performance of the
built-in aerial. Call quality may deteriorate leading to shortened
talk-time and standby time because the mobile phone has to
operate on a higher power level than is necessary.
• Use only the aerial supplied or one approved by Sharp for your
mobile phone. Using unauthorised or modified aerials may
damage the mobile phone. Moreover, since the mobile phone
may violate the appropriate regulations, it may lose performance
or exceed the limitation of SAR levels.
• To avoid impaired performance, do not damage the aerial of the
mobile phone.
• To avoid interfering with blasting operations, please turn off the
mobile phone in a blasting area or in a place where a “turn off
two-way radio” sign is posted.
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
• Be careful not to move your hand while taking pictures.
If the phone moves while taking a picture, the picture can become
blurred. When taking a picture, hold the phone firmly to prevent
it from moving, or use the delay timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear focusing.
Wipe them off with a soft cloth before taking a picture.
Others
• As with any electronic storage unit, data may be lost or corrupted
under various circumstances.
• Before connecting the phone with a PC or a peripheral unit, read
the operation manual for the other unit carefully.
• If the phone’s battery has been removed for some time, or the
phone has been reset, the unit’s clock and calendar may be
reinitialised. The date and time should be updated in this case.
Environment
• Keep your phone away from extreme heat. Do not leave it on the
dashboard of a car or near a heater. Do not leave it in any place
that is extremely damp or dusty.
118 Safety Precautions and Conditions of Use
• Since this product is not waterproof, do not use it or store it
where fluids such as water can splash onto it. Raindrops, water
spray, juice, coffee, steam, perspiration, etc. will also cause
malfunctions.
Precautions Concerning Vehicle Use
• It is the user’s responsibility to check the local laws governing the
use of a mobile phone in vehicles. Pay full attention to driving.
Pull off to the side of the road, park the car, and switch off the
engine before making or answering a call.
• Use of your phone’s function may interfere with the vehicle’s
electronic systems, such as the ABS anti-lock brakes or the
air-bag. To ensure no such problem occurs, please check with
your dealer or car manufacturer before connecting your phone.
• Only allow qualified service maintenance personnel to install the
vehicle accessories.
The manufacturer disclaims any liability for damage which may
result as a consequence of improper use or use contrary to the
instructions contained herein.
SAR
Your Sharp mobile phone has been designed, manufactured and
tested so as not to exceed the limits for exposure to
electromagnetic fields recommended by the Council of the
European Union. These limits are part of comprehensive guidelines
developed by independent scientific organisations. The guidelines
include a substantial safety margin designed to assure the safety of
the phone user and others and to take into account variations in age
and health, individual sensitivities and environmental conditions.
European standards provide for the amount of radio frequency
electromagnetic energy absorbed by the body when using a mobile
phone to be measured by reference to the Specific Absorption Rate
(SAR). The SAR limit for the general public is currently 2 watts per
kilogram averaged over 10 grams of body tissue. Your Sharp mobile
phone SAR value is 0.881 watts per kilogram. This has been tested
to ensure that this limit is not exceeded even when the phone is
operating at its highest certified power. In use however your Sharp
mobile phone may operate at less than full power because it is
designed to use only sufficient power to communicate with the
network.
FCC NOTICE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Safety Precautions and Conditions of Use 119
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits
are part of comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are
conducted using standard operating positions specified by the FCC
with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels
so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station aerial, the
lower the power output.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each
model. The highest SAR value for this model phone when tested for
use at the ear is 0.464 W/kg and when worn on the body, as
described in this user guide, is 0.367 W/kg. Body-worn Operation;
This device was tested for typical body-worn operations with the
back of the phone kept 1.5 cm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories
that maintain a 1.5 cm separation distance between the user’s
body and the back of the phone. The use of belt-clips, holsters and
similar accessories should not contain metallic components in its
assembly.
The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be
avoided. While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF emission guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
120 Safety Precautions and Conditions of Use
Grant section of http://www.fcc.gov/oet/fccid after searching on
FCC ID APYHRO00067.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications & Internet Association
(CTIA) web-site at http://www.phonefacts.net.
*In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one
gram of tissue. The standard incorporates a substantial margin
of safety to give additional protection for the public and to
account for any variations in measurements.
Safety Precautions and Conditions of Use 121
122 Out of Warranty List
Out of Warranty List
This limited warranty shall not apply in respect of the following:
(i) Any deterioration due to normal wear and tear including all
plastic surfaces and all other externally exposed parts that are
scratched or damaged due to normal customer use.
(ii) Defects caused by the Product being subjected to any of the
following: use in contradiction with the user guide, rough
handling, exposure to moisture, dampness or extreme thermal
or environmental conditions or rapid changes in such
conditions, corrosion, oxidation, unauthorised modifications or
connections, unauthorised opening or repair, repair by use of
unauthorised spare parts, misuse, improper installation,
accident, forces of nature, spillage of food or liquid, influence
from chemical products or other acts beyond Sharp’s
reasonable control (including but not limited to lifetime, and
breakage of or damage to aerials) unless the defect was
caused directly by defects in materials or workmanship.
(iii) Products in respect of which the product serial number or the
IMEI number has been removed, erased, defaced, altered or
made illegible.
(iv) Defects caused by the fact that the Product was used with or
connected to a product or an accessory not manufactured or
supplied by Sharp or was used other than for its intended use.
(v) Defects caused by a defective function of the cellular network.
(vi) Defects caused by the fact that the battery was short-circuited
or seals of the battery enclosure or cells were broken or show
evidence of tampering or the battery was used in equipment
other than for which it has been specified.
(vii) Defects caused by the need to upgrade Products software due
to changes in cellular network parameters.
(viii) Products operated outside published maximum ratings.
(ix) Products rented on a monthly basis.
Charger Plug:
Do not use the AC Charger if the plug does not fit the socket.
Index 123
Index
A
Alarms 76
Area Info 56
B
Battery 13, 116
Bluetooth 106
Browser 60
Browser Settings 61
Navigating a WAP or Web
Page 60
C
Calculator 79
Calendar 72
Call Functions 23, 104
Auto Redial 100
Call Costs 104
Call Restrictions 98
Call Timers 100, 104
Call Waiting 25, 100
Conference Call 25
Data Counter 105
Earpiece Volume 24
Emergency Calls 23
International Calls 23
Make Another Call 25
Minute Minder 99
Muting the Microphone 26
My Phone Number 97
Redialling 24
Rejecting a Call 24, 99
Sending a Busy Tone 24
Speaker 25
Speed Dialling 24, 41
Voice Call 23, 24
Voicemail & Diverts 96
Call Log 104
Camera 45
Continuous Shoot 48
Digital Zoom 45
Exposure 46
Focus Mode 46
Mobile Light 12, 47
Panorama 48
Picture Quality 46
Picture Size 48, 50
Recording Time 50
Recording Video Clips 45, 50
Scanner 49
Scene 49
Settings 45
Shortcut Keys 47
Switching Modes 47
Taking Pictures 45
Video Encoding 50
Video Quality 46
White Balance 49
Cell Broadcasts 55
Characters
Changing the Input
Method 27
Chinese User Dictionary 31
Cutting, Copying, Pasting
Text 34
Entering Characters 27
Input Language 27
Text Templates 34, 83
Chinese User Dictionary 31
Creating 31
Deleting 31
Editing 31
Using 32
Conditions of Use 115
Connectivity 106
Countdown Timer 81
Cycloid Position 17
D
Display Indicators 19
Document Viewer 82
E
Expenses Memo 80
F
Flash®65
G
Gallery 63
Other Documents 65
H
Handset Code 95
Help 85
Hour Minder 82
I
Infrared 108
124 Index
J
Java™ 68
Java™ Settings 69
M
Main Menu 35
Mass Storage 108
Master Reset 96
Memory Card 15
Memory Status 41, 67, 75, 79
Messaging 51
Attaching/Removing Data 53
Creating a Message 51
Drafts Box 53
Email 51, 59
Forwarding a Message 55
Mailing List 38
MMS 51, 54, 57
Reading a Message 53
Replying to a Message 54
Sending Options 53
Settings 56
SMS 51, 57
Multimedia 42
Music Player 43
Adding a File 44
Adding a New Playlist 43
Downloading Music 44
Playing Back Music 44
Sorting 44
N
Navigating Functions 22
O
Off Line Mode 101
Organiser 72
P
PC Connection 110
Phonebook
Adding New Entry 37
Category 40
Dialling from an Entry 38
Editing Entries 39
Group 38
Saving a Number 37
Saving an Address 54
Saving an Image 63
Searching the List 37
Sending a Message 38
Storage Memory 37
Thumbnail 39
Phonebook Lock 95
Picture Gallery 63
PIN/PIN2 Code 94
Power On and Off 17
S
Safety Precautions 115
Set Java™ Wallpaper 70
Settings 87
Date & Time 93
Display 88
Font 89
Internet 101
Language 93
Network 100
Profile 87
Security 94
Sound 91
Standby Display 89
Shortcut Keys 35
SIM Application 86
SIM/USIM Card 13
Sound Gallery 64
Stopwatch 81
Streaming Player 42
T
T9 Text Input
Using PinYin mode 30
Using Stroke mode 30
Using T9 English Mode 28
Tasks 77
Themes 65
U
USB Charge 108
V
Video Gallery 63
Videos 42
Adding a File 42
Adding a New Playlist 43
Downloading Video 43
Playing Back Video 42
Searching a File 42
Settings 43
Voice Recorder 83
W
World Clock 81