Sharp HRO00225 Smart Phone User Manual 12 Operation Manual APYHRO00225

Download:
Mirror Download [FCC.gov]
Document ID	2761115
Application ID	4PWJXRclH+4sLW0/aqCFtw==
Document Description	12_Operation Manual_APYHRO00225.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	103.38kB (1292253 bits)
Date Submitted	2015-09-24 00:00:00
Date Available	2015-12-23 00:00:00
Creation Date	2015-09-15 14:46:43
Document Lastmod	2015-09-15 17:41:41
Document Title	12_Operation Manual_APYHRO00225.pdf

General Inquiries

(Business hours: 9:00 a.m. to 8:00 p.m.)
0120-005-250 (toll free)
※ Service available in: English, Portuguese, Chinese,
Spanish.
※ Unavailable from part of IP phones.
(Business hours: 9:00 a.m. to 8:00 p.m. (open all year
round))
■From DOCOMO mobile phones
(In Japanese only)
Repairs
(Business hours: 24 hours (open all year round))
■From DOCOMO mobile phones
(In Japanese only)
(No prefix) 113 (toll free)
※ Unavailable from land-line phones, etc.
■From land-line phones (In Japanese only)
0120-800-000 (toll free)
※ Unavailable from part of IP phones.
(No prefix) 151 (toll free)
※ Unavailable from land-line phones, etc.
■From land-line phones (In Japanese only)
0120-800-000 (toll free)
※ Unavailable from part of IP phones.
● Please confirm the phone number before you dial.
● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo
Shop etc. near you on the NTT DOCOMO website.
NTT DOCOMO website https://www.nttdocomo.co.jp/english/
SH-01H
For loss, theft, malfunction, and inquiries while overseas (24-hour reception)
■From DOCOMO mobile phones
International call access code
for the country you stay
-81-3-6832-6600* (toll free)
INSTRUCTION MANUAL
* You are charged a call fee to Japan when calling from a land-line phone, etc.
※ If you use SH-01H, you should dial the number +81-3-6832-6600 (to enter “+”, touch and hold “0”).
■From land-line phones 
Universal number
international prefix
-8000120-0151*
* You might be charged a domestic call fee according to the call rate for the country you stay.
※ For international call access codes for major countries and universal number international prefix, refer to DOCOMO website.
● If you lose your handset or have it stolen, immediately take the steps necessary for suspending the use of
the handset.
● If the handset you purchased is damaged, bring your handset to a repair counter specified by DOCOMO
after returning to Japan.
Don’t forget your mobile phone… or your manners!
When using your mobile phone in a public place, don’t forget to show common courtesy and consideration for others around you.
Sales:
Manufacturer: SHARP Corporation
’15.● (1st Edition)
15● YI*** 1
’15.●
SH-01H_E.book
0 ページ
２０１５年９月１５日
火曜日
午後１時２６分
Introduction
Thank you for purchasing “SH-01H”.
Be sure to read this manual before and during use to ensure proper operation.
Checking operation method
Basic package
Quick Start Guide (Basic package)
(in Japanese only)
This guide describes operations of basic functions.
User's Manual (App of the handset)
(in Japanese only)
This manual describes detailed guidance and
operations of functions.
In the home screen, [R]/[Instruction Manual]
SH-01H
(includes warranty)
User's Manual (in PDF format)
This manual describes detailed guidance and
operations of functions.
Download from the DOCOMO website
(https://www.nttdocomo.co.jp/english/support/
trouble/manual/download/index.html)
※ The URL and contents are subject to change without
prior notice.
The screens and illustrations in this manual are shown as
examples. The actual screens and illustrations may differ.
The explanations in this manual are based on the case when
the home app is docomo LIVE UX and the setting of kisekae is
[Blue]. If you change the home app, operation procedures etc.
may be different from the explanations of this manual.
Note that “SH-01H” is referred to as “handset” in this manual.
This manual refers to microSD Card, microSDHC Card or
microSDXC Card as “microSD Card” or “microSD”.
Reproduction of this manual in part or in whole without prior
permission is prohibited.
The contents of this manual are subject to change without
prior notice.
Quick Start Guide
(in Japanese only)
TV/Mobacas antenna
cable SH01
Notes on usage
(in Japanese only)
For optional parts (sold separately) compatible with the handset,
refer to the DOCOMO website.
(https://www.nttdocomo.co.jp/product/option/)(in Japanese only)
SH-01H_E_01.fm
[0/12]
~~~~~ ~~~~~ ~~~~~ ~~~~~ ~~~~~
SH-01H_E.book
4 ページ
２０１５年９月１５日
火曜日
Precautions (ALWAYS FOLLOW
THESE DIRECTIONS)
Handling the handset, adapters, docomo
nano UIM card and TV/Mobacas antenna
cable (general)
Before use, read these “Precautions” carefully and use your
handset properly.
Keep this manual in a safe place for future reference.
These precautions contain information intended to prevent bodily
injury to the user and to surrounding people, as well as damage
to property, and must be observed at all times.
The following symbols indicate the different degrees of injury
or damage that may occur if information provided is not
observed and the handset is used improperly.
Danger
Warning
Caution
Danger
Do not use, store or leave the equipment in
locations subject to high temperatures or
accumulation of heat (near a fire or heating unit, in
a kotatsu or bedding, under direct sunlight, inside a
vehicle on a hot day, etc.).
May cause fires, burns, bodily injury, electric shock, etc.
This symbol indicates that
“death or serious bodily injury
may directly and immediately
result from improper use”.
Do not place the equipment inside cooking
appliances such as microwave ovens or pressure
cookers.
May cause fires, burns, bodily injury, electric shock, etc.
Do not attempt to disassemble or modify the
equipment.
This symbol indicates that
“death or serious bodily injury
may result from improper use”.
May cause fires, burns, bodily injury, electric shock, etc.
Do not get the equipment wet with liquids such as
water (drinking water, sweat, seawater, pet urine,
etc.).
This symbol indicates that
“minor injury and/or property
damage may result from
improper use”.
May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
nP. 11 “Waterproof/Dustproof”
Do not allow liquids such as water (drinking water,
sweat, seawater, pet urine, etc.) to get inside the
charger terminal or external connector terminal.
The following symbols indicate specific directions.
Indicates a
prohibited action.
Indicates not to
handle the device
with wet hands.
Indicates not to
disassemble the
device.
Indicates that
instructions
specified are
compulsory (must
be followed).
Indicates not to use
the device near
water or get it wet.
Indicates that the
power cord must be
unplugged from the
outlet.
午後１時２６分
May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
nP. 11 “Waterproof/Dustproof”
Use only optional parts specified by NTT DOCOMO
for use with the handset.
May cause fires, burns, bodily injury, electric shock, etc.
Warning
Do not subject the equipment to strong force or
impacts such as letting it fall, stepping on it or
throwing it.
May cause fires, burns, bodily injury, electric shock, etc.
“Precautions” is explained in the following six sections.
Handling the handset, adapters, docomo nano UIM card and TV/
Mobacas antenna cable (general). . . . . . . . . . . . . . . . . . . . . P. 4
Handling the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 5
Handling adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 6
Handling docomo nano UIM card . . . . . . . . . . . . . . . . . . . . . P. 7
Handling near electronic medical equipment . . . . . . . . . . . . P. 7
Material list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 7
Do not allow conductive materials (such as metal
objects and pencil lead) to come into contact with
the charger terminal or external connector terminal
or dust to get inside it.
May cause fires, burns, bodily injury, electric shock, etc.
Do not cover or wrap the equipment with bedding
etc. when using or charging.
May cause fires, burns, etc.
Be sure to turn off the handset and not to charge
the battery in locations such as gas stations where
flammable gas may be generated.
May cause a gas explosion or fire.
To use Osaifu-Keitai in locations such as gas stations, be
sure to turn off the power in advance (If NFC/Osaifu-Keitai
lock is set, disable the lock before turning off the power).
SH-01H_E_01.fm
[4/12]
Contents/Precautions
SH-01H_E.book
5 ページ
２０１５年９月１５日
火曜日
午後１時２６分
If you notice anything unusual, such as an unusual
odor, unusual noise, smoking, overheating,
discoloration or deformation during use, charging
or storage, follow the instructions below.
Unplug the power plug from the outlet or
cigarette lighter socket.
Turn off the handset.
Do not point the illuminated light directly at
someone's eyes. Especially when you shoot still
pictures or videos of young children, keep 1 m or
more distance from them.
May cause fires, burns, bodily injury, electric shock, etc. if
you do not follow the instructions above.
Do not use Mobile light near people's faces. Eyesight may
be temporarily affected leading to accidents etc.
Warning
Do not allow water or other liquids, metal,
flammable material or other foreign object to enter
the docomo nano UIM card slot or microSD Card
slot on the handset.
Caution
Do not leave the equipment on unstable surfaces,
such as on a wobbly table or sloped surface.
May cause fires, burns, bodily injury, electric shock, etc.
May fall and cause injury etc.
Do not shine the mobile light at anyone driving a
car or other vehicles.
Do not store the equipment in locations that are
subject to humidity, dust or high temperatures.
May prevent a driver from driving safely and cause a traffic
accident.
May cause fires, burns, electric shock, etc.
If any trouble such as an unusual odor,
overheating, discoloration or deformation is found,
immediately stop using it and move it away from
any naked flames or fire.
If being used by a child, have a guardian teach him/
her the proper handling procedures. In addition,
check that the child is using the equipment as
directed.
May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
internal battery.
May result in bodily injury etc.
Keep the equipment out of the reach of young
children.
Turn off the handset or set it to Airplane mode
before going aboard an airplane.
A young child may swallow the equipment, or suffer bodily
injury, electric shock, etc.
Since using the handset on airplanes is restricted, follow the
instructions given by the respective airlines.
May interfere with the operation of electronic devices
installed on the airplane.
If you commit a prohibited act while using the handset on an
airplane, you may be punished by law.
Be careful when using the handset continuously for
a long time or charging. Also, be careful not to
touch it unintentionally for a long time when you
fall asleep etc.
The handset or adapter may become warm when using an
app, a call, data communication, watching TV or video, etc.
for a long time or charging.
Directly touching a warmed part for a long time may cause
redness, itching, rashes, etc. on your skin, or result in
low-temperature burns etc. depending on your constitution
or health condition.
Follow the instructions given by the respective
medical facility regarding the use of the handset in
a hospital.
Turn off the handset in areas where the use of mobile
phones is prohibited.
May interfere with the operation of electronic devices and
electronic medical equipment.
Keep the handset away from the ears during a call
in which hands-free is set or while the ringtone is
ringing.
When you attach the earphone/microphone etc. to
the handset to play games, music, etc., do not
make the volume too loud.
Handling the handset
The following is the type of the internal battery built into the
handset.
Label
Battery type
Li-ion00
Lithium-ion
Excessively high volume may damage your hearing etc.
Also, it may prevent you from hearing ambient sounds and
cause an accident.
Danger
If you have a weak heart, take extra precautions
when setting functions such as the vibrator and
ringtone volume for incoming calls.
Do not throw the handset into a fire or heat it.
May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
internal battery.
May have harmful effects on your heart.
If you are using electronic medical equipment etc.,
contact the respective manufacturer or dealer to
check whether the operation of the equipment is
affected by signals.
Do not apply excessive force on the handset such
as by puncturing it with a nail (sharp object), hitting
it with a hammer (hard object) or stepping on it.
May interfere with the operation of electronic medical
equipment etc.
May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
internal battery.
If the battery fluid etc. comes into contact with your
eyes, do not rub your eyes but immediately rinse
your eyes with clean water. Then seek prompt
medical treatment.
May result in loss of eyesight etc.
SH-01H_E_01.fm
[5/12]
Contents/Precautions
SH-01H_E.book
6 ページ
２０１５年９月１５日
火曜日
午後１時２６分
May interfere with the operation of electronic devices.
Use of the handset may cause itching, rashes,
eczema, etc. depending on your constitution or
health condition. If this occurs, immediately stop
using the handset and seek medical treatment.
※ Take particular care with the following devices
For details on materials of each part nP. 7 “Material list”
Hearing aids, implanted cardiac pacemakers, implanted
cardioverter-defibrillators or other electronic medical
equipment. Fire alarms, automatic doors, and other
equipment controlled by electronic signals. If you use an
implanted cardiac pacemaker, implanted
cardioverter-defibrillator or other electronic medical
equipment, contact the respective manufacturer or dealer to
check whether the operation of the equipment is affected by
signals.
Look at the display in a well-lit place, keeping a
certain distance from the screen.
Turn off the handset near high-precision electronic
devices or devices that use weak electronic
signals.
Otherwise, eyesight may be weakened etc.
If the battery fluid etc. leaks, do not get the liquid on
your skin (face, hands, etc.).
May result in loss of eyesight or harm to your skin.
If the liquid etc. comes into contact with your eyes, mouth,
skin or clothes, immediately rinse the contacted area with
clean water.
If the liquid etc. comes into contact with your eyes or mouth,
seek medical treatment immediately after rinsing the
contacted area.
If the display part, back part or camera lens is
damaged, be careful of broken glass and the
exposed inside of the handset.
Tape is pasted on the back surface of the display while the
surface of the display and back surface of the back part are
covered by protective films so as to minimize the possibility
of glass scattering. However, touching the broken or
exposed parts may cause bodily injury etc.
Handling adapters
Warning
If the internal battery leaks or emits an unusual
odor, immediately stop using the handset and
move it away from any naked flames or fire.
Do not use if the cord of the adapter is damaged.
The battery fluid is flammable and could ignite, causing a
fire, explosion, etc.
May cause fires, burns, electric shock, etc.
Never use the adapter in humid locations such as a
bathroom.
Caution
May cause fires, burns, electric shock, etc.
Do not use a damaged handset.
The DC adapter should only be used in negative
grounded vehicles. Never use it in positive
grounded vehicles.
May cause fires, burns, bodily injury, electric shock, etc.
May cause fires, burns, electric shock, etc.
For using a motion sensor and geomagnetic
sensor, check the safety around, hold the handset
and do not swing it more than necessary.
Do not touch adapters if you hear thunder.
May cause electric shock etc.
May cause an accident such as bodily injury.
If the display is broken and the internal substance
etc. then leaks, do not get it on your skin (face,
hands, etc.).
Do not short-circuit the charger terminal when
connected to an outlet or cigarette lighter socket.
Also, do not allow any part of your body (hands,
fingers, etc.) to come into contact with the charger
terminal.
May result in loss of eyesight or harm to your skin.
If the internal substance etc. comes into contact with your
eyes or mouth, immediately rinse the contacted area with
clean water and seek medical treatment.
If it comes into contact with your skin or clothes,
immediately wipe it off with alcohol etc., and rinse the
contacted area with soap etc.
May cause fires, burns, electric shock, etc.
Do not place heavy objects on the cord of the
adapter.
May cause fires, burns, electric shock, etc.
When plugging/unplugging an AC adapter into/from
the outlet, do not allow metallic straps or other
metallic objects to come into contact with the
prongs of the plug.
The surface of the display is covered with a
protective film for ensuring the security
(shatterproof property of reinforced glass panel)
against any damages caused by the handset being
dropped or receiving a strong impact etc. Do not
remove the film forcibly or damage it.
May cause fires, burns, electric shock, etc.
Do not connect the voltage converter for overseas
travel (travel converter) to the AC adapter.
Using the handset with the film removed may cause bodily
injury if the display gets damaged.
May catch fire, or cause overheat, electric shock, etc.
Do not dispose of the handset in ordinary garbage.
Do not apply excessive force on the connection
part with the adapter connected to the handset.
May cause fires or damage to the environment. Take the
unnecessary handset to a sales outlet such as a docomo
Shop or follow the instructions by a local institution that
handles used handsets.
May cause fires, burns, bodily injury, electric shock, etc.
If you use the handset in a vehicle, contact the
vehicle manufacturer or dealer to check whether
the operation of the vehicle is affected by signals.
May interfere with the operation of electronic equipment in
some vehicle models. In this case, stop using the handset.
SH-01H_E_01.fm
[6/12]
Contents/Precautions
SH-01H_E.book
7 ページ
２０１５年９月１５日
火曜日
午後１時２６分
Never try to connect the microUSB plug when the
handset or AC adapter is wet or dirty.
Caution
The AC adapter does not provide waterproof/dustproof
performance though the handset provides them. Inserting
the microUSB plug while the equipment is wet or dirty may
cause short circuit when you charge the battery and lead to
abnormal overheat, malfunction, fires or burns due to water,
foreign object, etc. adhering to the handset or microUSB
plug.
Do not touch the adapter for a long time when
connected to an outlet or cigarette lighter socket.
May cause burns etc.
Handling docomo nano UIM card
Do not handle the cord , charger terminal or power
plug of the adapter with wet hands.
Caution
May cause fires, burns, electric shock, etc.
Be careful with the cutting surface when handling
the docomo nano UIM card.
Always use the specified power supply and voltage.
When using overseas, use the AC adapter that is
available overseas.
May cause bodily injury etc.
Using the incorrect power supply and voltage may cause
fires, burns, electric shock, etc.
AC adapter: 100V AC (Connect only with a household AC
outlet)
AC adapter available overseas: 100 to 240V AC (Connect
only with a household AC outlet)
DC adapter: 12/24V DC (for negative grounded vehicles
only)
Handling near electronic medical equipment
Warning
If you have electronic medical equipment such as
an implanted cardiac pacemaker or an implanted
cardioverter-defibrillator, always carry or use your
handset at least 15 cm away from your implant.
If the fuse in the DC adapter blows, always replace
it with a specified fuse.
May cause fires, burns, electric shock, etc. if you use the
fuse other than specified one. Refer to the respective
manuals for information on specified fuses.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
Patients receiving medical treatment away from a
medical facility (e.g. home treatment) who are using
electronic medical equipment other than implanted
cardiac pacemakers or implanted
cardioverter-defibrillators should consult the
respective manufacturers etc. for information
regarding the effects of signals on the equipment.
Wipe off any dust on the power plug.
May cause fires, burns, electric shock, etc. if you use it with
dust adhering.
Fully plug the adapter into the outlet or cigarette
lighter socket.
May cause fires, burns, electric shock, etc. if you do not
insert it securely.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
Always grasp the adapters when unplugging the
power plug from the outlet or cigarette lighter
socket. Do not apply excessive force on it such as
pulling the cord of the adapter.
If there is any chance that the distance between the
handset and a person closest to you may get
shorter than 15 cm such as when you cannot freely
move around, set the handset not to emit radio
wave in advance (by setting Airplane mode, turning
the power off, etc.).
May cause fires, burns, electric shock, etc. since the cord of
the adapter is damaged by pulling it.
When plugging/unplugging an adapter into/from
the handset, plug/unplug the adapter straightly
toward the terminal to connect, not applying
excessive force on it such as pulling the cord.
Somebody nearby may be equipped with electronic medical
equipment such as an implanted cardiac pacemaker or an
implanted cardioverter-defibrillator. Electromagnetic signals
may have harmful effects on the operation of the electronic
medical equipment.
May cause fires, burns, bodily injury, electric shock, etc. if
you do not plug/unplug it correctly.
Follow the instructions given by the respective
medical facilities regarding the use of the handset
on their premises.
Unplug the power plug of the adapter from the
outlet or cigarette lighter socket when not using.
May cause fires, burns, bodily injury, electric shock, etc. if
you leave the power plug with plugging to the outlet or
cigarette lighter socket.
Material list
Should water or other liquids (drinking water,
sweat, seawater, pet urine, etc.) enter the
equipment, remove the power plug from the outlet
or cigarette lighter socket.
Handset
Part
May cause fires, burns, electric shock, etc.
Always unplug the power plug from the outlet or
cigarette lighter socket before cleaning the
equipment.
Reinforced glass/Shatterproof
sheet of surface
Surrounding area of display side
Aluminum/Anodizing
Upper surface
Aluminum/Anodizing
Edge of upper surface
PC resin/UV coating for
surface, Deposition
Bottom surface
Aluminum/Anodizing
May cause fires, burns, electric shock, etc.
SH-01H_E_01.fm
[7/12]
Material/Surface treatment
Display side
Contents/Precautions
SH-01H_E.book
8 ページ
Part
２０１５年９月１５日
火曜日
Material/Surface treatment
Sides
Aluminum/Anodizing
Grip sensor
Acryl
Incoming/Charging lamp
PC resin/UV coating for
surface, Deposition
Back
Reinforced glass/Printing on
the back surface
Surrounding area of back
PA resin/UV coating for
surface
午後１時２６分
Handling precautions
General notes
SH-01H is waterproof/dustproof, however, do not allow
foreign object such as liquids or dust to get inside the
handset and do not allow foreign object such as liquids or
dust to adhere to accessories or optional parts.
docomo nano UIM card slot
SUS/Ni plating
microSD Card slot
SUS/Ni plating
docomo nano UIM card/microSD
Card slot cover
PC resin/UV coating for
surface, Deposition
The adapter, docomo nano UIM card and TV/Mobacas antenna cable
are not waterproof/dustproof. Do not use in humid or steamy areas
such as bathrooms and avoid exposing to rain and other forms of
moisture. If they are carried close to the skin, perspiration may cause
internal components to corrode and result in malfunction. Note that if
a problem is found to be due to moisture, the handset and parts are
not covered by warranty and in some cases may be irreparable. Even
when repairs are possible, repair charges will be incurred, since the
damage is not covered by warranty.
Gasket of docomo nano UIM
card/microSD Card slot cover
Silicon rubber, SUS
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
Tray for inserting docomo nano
UIM card
POM resin
IMEI plate
PET resin
Surrounding area of earphone/
microphone terminal
PC resin
Power key
Aluminum/Anodizing
Side key
Aluminum/Anodizing
Camera panel
Reinforced glass/Printing on
the back surface
Decoration of camera
Aluminum/Anodizing
Condensation formed due to rapid changes in temperature may
cause internal corrosion and lead to a malfunction.
Fingerprint sensor
Polyimide/UV coating
Do not apply excessive force on the handset etc. when
using it.
Decoration of fingerprint sensor
Aluminum/Anodizing
External connector terminal
SUS/Sn plating, Copper alloy/
Gold plating
Carrying the equipment in a tightly packed bag or sitting on it put in
your pocket may cause damage to the display, internal components,
etc. or result in a malfunction.
Keeping an external connector device plugged into the external
connector terminal or earphone/microphone terminal may cause
damage or a malfunction.
･ Forceful rubbing of the display with a dry cloth etc. may scratch its
surface.
･ Water drops, dirt, etc. left on the display may cause stains to form
on its surface.
･ Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power or
insufficient battery charge. Keep the terminals clean with a dry cotton
swab etc.
Be careful with the terminals while cleaning them.
Do not place the equipment near an air conditioning vent.
TV/Mobacas antenna cable SH01
Part
Material/Surface treatment
Earphone/Microphone terminal
(Resin section)
Styrene system elastomer
Earphone/Microphone terminal
(Metal section)
Ni base, Brass/Gold plating
Cord
Olefin system elastomer
Connector
Styrene system elastomer
Connector (Connection)
POM resin
Plug (Metal section)
Ni base, Brass/Gold plating
Plug (Resin section)
PP resin
Do not rub or scratch the display with metal etc.
May scratch it and cause a malfunction or damage.
Read the respective user's guides supplied with supported
optional parts carefully.
Notes about the handset
Do not forcefully press the surface of the touch panel or
operate with a pointed object such as a fingernail, ballpoint
pen or pin.
May damage the touch panel.
Avoid using the handset in extremely high or low
temperatures.
Use the handset within the range of a temperature between 5°C and
35°C and a humidity between 45% and 85%.
Using the handset close to land-line phones, TVs, radios,
etc. may have harmful effects on the operation of such
equipment. Move as far away as possible from such items
before use.
Keep a separate memo noting information stored on the
handset.
DOCOMO shall not be liable for any loss of content.
Do not drop or otherwise subject the handset to severe
impact.
May cause a malfunction or damage.
SH-01H_E_01.fm
[8/12]
Contents/Precautions
SH-01H_E.book
9 ページ
２０１５年９月１５日
火曜日
When connecting an external connector device to the
external connector terminal or earphone/microphone
terminal, do not put it in obliquely and do not pull it while it
is plugged in.
午後１時２６分
Notes about docomo nano UIM card
Do not apply unnecessary force when inserting/removing
the docomo nano UIM card.
Customer is responsible for malfunctions arising from
inserting docomo nano UIM card into a different IC card
reader/writer etc.
Always keep IC area clean.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
Keep a separate memo and note information stored on the
docomo nano UIM card.
May cause a malfunction or damage.
The handset becomes warm during use or charging but this
is not a malfunction.
Do not leave the camera in direct sunlight.
May cause discoloration or burn-in of pixels.
Use the handset with the docomo nano UIM card/microSD
Card slot cover closed.
Dust, water, etc. may get inside and cause a malfunction.
Do not give a strong impact on the fingerprint sensor or
scratch the surface.
DOCOMO shall not be liable for any loss of content.
To protect the environment, please take any unneeded
docomo nano UIM cards to a sales outlet such as a docomo
Shop.
Do not damage, touch haphazardly or short-circuit the IC.
May cause not only malfunction of the fingerprint sensor but also
disabling authentication.
Clean the fingerprint sensor with a soft and dry cloth (such
as the type used for eyeglasses).
May cause data loss or a malfunction.
When the fingerprint sensor is dirty or gets wet on the surface, it
cannot read the fingerprint and may degrade the authentication
performance or cause an error.
Do not drop or otherwise subject the docomo nano UIM
card to severe impact.
May cause a malfunction.
While using a microSD Card, do not remove the card or turn
off the handset.
Never bend the docomo nano UIM card or place heavy
objects on it.
May cause data loss or a malfunction.
May cause a malfunction.
Never place a magnetic card near the handset.
Do not insert the docomo nano UIM card to the handset with
a label, sticker, etc. attached on the card.
The stored magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.
May cause a malfunction.
Never place magnetized items near the handset.
Putting highly magnetized items closer may cause an error.
Notes on using Bluetooth function
The internal battery is a consumable product.
Though the battery life varies with use, change the battery if the
battery life is extremely short even after being fully charged. For
details on replacing the internal battery, contact the number listed in
“Repairs” (in Japanese only) on the last page or a repair counter that
DOCOMO specifies.
The handset supports the security function that meets the
Bluetooth specification for security during communication
using Bluetooth functions. However, the security may not
be sufficient depending on the configuration etc. Take care
of the security while making communication using
Bluetooth function.
Even if any leak of data or information occurs while making
communication using Bluetooth function, DOCOMO shall
not be liable for any loss of content.
Radio frequencies
In the home screen, [R]/[Settings]/[About phone]/
[Authentication] to confirm the radio frequencies the
Bluetooth function of the handset uses. The followings are
the descriptions:
Charge battery in areas where ambient temperature is
between 5°C and 35°C.
The battery life depends on the usage and deterioration of
the battery.
Avoid the following situations when the handset is stored.
 Storage with the internal battery fully charged (immediately after
charging is completed)
 Storage with no battery level (cannot turn the handset on)
May lower the performance or shorten the usable life of the internal
battery.
Approximately 40% is recommended as the proper battery level for
storage.
ӱġ
The surface of the handset uses the aluminum material.
Note that dent and abrasion are easily remained as
aluminum is a soft material.
Ӵġ ӵġ
Ӷġ
①
②
③
④
⑤
⑥
Notes about adapters
Charge the battery in areas where the ambient temperature
is between 5°C and 35°C.
Do not charge the internal battery in the following locations.
 Areas with high humidity or dust, or in areas exposed to frequent
vibrations
 Close to land-line phones, TVs, radios, etc.
2.4: This radio equipment uses the 2,400 MHz band.
FH: The modulation system is the FH-SS system.
1: The estimated coverage distance is 10 m or less.
XX: Another modulation system is used.
4: The estimated coverage distance is 40 m or less.
: All radio frequencies between 2,400 MHz and
2,483.5 MHz are used and the frequencies for mobile object
identifiers cannot be avoided.
Cautions on using Bluetooth devices
Bluetooth operates at radio frequencies assigned to the
in-house radio stations for a mobile object identifier that
have to be licensed and are used in production lines of a
factory, specific unlicensed low power radio stations, and
amateur radio stations (hereafter, referred to as “another
radio station”) in addition to industrial, scientific and
medical devices or home electric appliances such as
microwave ovens.
1. Before using the handset, make sure that “another radio
station” is not operating nearby.
Adapters may become warm during charging but this is not
a malfunction.
Do not use the DC adapter to charge the battery when the
car engine is not running.
May cause the car battery to run down.
When using an outlet with a feature to prevent the plug from
being removed accidentally, follow the instructions in the
outlet user's guide.
Do not subject to strong impacts. Also, do not deform the
charger terminals.
May cause a malfunction.
SH-01H_E_01.fm
[9/12]
Ӳġ ӳġ
Contents/Precautions
SH-01H_E.book
10 ページ
２０１５年９月１５日
火曜日
Cautions on using 5 GHz devices
In the 5 GHz frequency band, three bands of 5.2 GHz/5.3
GHz/5.6 GHz band (W52/W53/W56) are available.
･ W52 (5.2 GHz band/36, 40, 44, 48 ch)
･ W53 (5.3 GHz band/52, 56, 60, 64 ch)
･ W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128,
132, 136, 140 ch)
Using 5.2 GHz/5.3 GHz band wireless LAN (W52/W53)
outdoors is prohibited by the Radio Law.
2. If radio interference between the handset and “another
radio station” occurs, avoid interference by moving
immediately to another place or “turning off the power”.
3. Contact the number listed in “General Inquiries” on the
last page for further details.
Notes about wireless LAN (WLAN)
Wireless LAN (WLAN) uses radio waves to communicate
information. Therefore, it has an advantage of freely
connecting to the LAN within the service area. On the other
hand, if security setting is not set, it is possible for a
malicious third party to intercept the communication
contents or hack. It is recommended to set security setting
at your own risk and judgement.
Wireless LAN
FeliCa and NFC reader/writer
The FeliCa, NFC reader/writer and P2P function of the
handset use weak radio waves whose handling does not
require a license of radio station.
The frequency in use is the 13.56 MHz band. When another
reader/writer or P2P function is being used nearby, keep
enough distance from it. Make sure that there is no radio
station using the same frequency band in the nearby area.
For use in an aircraft, contact the airline beforehand. Use of
the function may be restricted in some countries.
Check conditions such as regulations of the country/region
to use the function.
Do not use wireless LAN near magnetic devices such as electric
appliances or AV/OA devices or in radio waves.
･ Magnetism or radio waves may increase noises or disable
communications (especially when using a microwave oven).
･ When used near TV, radio, etc., reception interference may occur
or channels on the TV screen may be disturbed.
･ If there are multiple wireless LAN access points nearby and the
same channel is used, search may not work correctly.
Radio frequencies
In the home screen, [R]/[Settings]/[About phone]/
[Authentication] to confirm the radio frequencies the
WLAN-installed devices use. The followings are the
descriptions:
ӱġ
Ӳġ
Caution
Never use the handset that is modified. Using a modified
device violates the Radio Law and/or the
Telecommunications Business Law.
The handset follows the regulations regarding the certification of
conformity with technical regulations for specific radio stations etc.
based on the Radio Law and authentication of conformity with
technical regulations for devices etc. based on the
Telecommunications Business Law, and the “Technical Conformity
Mark
” can be displayed on the electronic nameplate of the
handset as a proof. You can see it by operating as follows.
In the home screen, [R]/[Settings]/[About phone]/
[Authentication]
If the screws of the handset are removed and a modification is given
to the inside, the certification of conformity with technical regulations
etc. will become invalid. Never use the handset without the valid
certification etc. Doing so violates the Radio Law and/or the
Telecommunications Business Law.
ӳġ Ӵġ
ӵġ
①
②
③
④
⑤
2.4: This radio equipment uses the 2,400 MHz band.
DS: The modulation system is the DS-SS system.
OF: The modulation system is the OFDM system.
4: The estimated coverage distance is 40 m or less.
: All radio frequencies between 2,400 MHz
and 2,483.5 MHz are used and the frequencies for mobile object
identifiers can be avoided.
Available channels for the handset's wireless LAN are between 1 and
13. Note that other channel access points cannot be connected.
Available channels may vary depending on the country.
For use in an aircraft, contact the airline beforehand.
Be careful when using the handset while driving a motor
vehicle.
Using the handset in hand while driving is regarded as a punishable
act.
However, the punishment has no application in some cases such as
when rescuing sick and injured people or maintaining public safety.
Cautions on using 2.4 GHz devices
WLAN-installed devices operate at radio frequencies
assigned to the in-house radio stations for a mobile object
identifier (radio stations requiring a license) used in
production lines of a factory, specific low power radio
stations (radio stations requiring no license), and amateur
radio stations (radio stations requiring a license) in addition
to industrial, scientific and medical devices or home electric
appliances such as microwave ovens.
1. Before using this device, make sure that the in-house
radio stations for a mobile object identifier, specific low
power radio stations and amateur radio stations are not
operating nearby.
2. If the device causes harmful radio interference to the
in-house radio stations for a mobile object identifier,
immediately change the radio frequency or stop use, and
contact the number listed in “General Inquiries” on the last
page for crosstalk avoidance, etc. (e.g. partition setup).
3. If the device causes radio interference to specific low
power radio stations for a mobile object identifier or
amateur radio stations, contact the number listed in
“General Inquiries” on the last page for further details.
The FeliCa and NFC reader/writer function of the handset
conform to the domestic radio wave standards. When you
use it overseas, check conditions such as regulations of the
country/region in advance.
Never change the basic software improperly.
This may be regarded as a conversion of software and repairs may be
refused.
10
SH-01H_E_01.fm
[10/12]
午後１時２６分
Contents/Precautions
SH-01H_E.book
13 ページ
２０１５年９月１５日
火曜日
午後１時２６分
9 Display/Touch panel*3
a Front camera
b Proximity sensor for Grip Magic (lower part of the display/
back)*2
Detects the distance to the object and prevents inadvertent
operation of Grip Magic.
c Mobile light
d H: Power key
Use to turn the power on/off, etc.
Use to turn the display on/off.
e x/y: Volume UP/DOWN key
Adjusts the volume in each function.
f External connector terminal
g Microphone
Use when recording videos.
Use to measure ambient noises for communicating by making
your voices sound clear when using Clear talk.
Use when talking to emopa.
h Earphone/Microphone terminal
i Back camera
j a mark
IC card is contained (It cannot be removed).
k Fingerprint sensor
Use to unlock the touch panel etc. by fingerprint
authentication.
l Mouthpiece/Microphone/Air vent
Use as a microphone when recording videos or talking to
emopa.
A vent to remove excess air from the handset.
m Speaker
Ringtone, music, etc. can be heard from here.
The other party's voice can be heard from here during a
hands-free call.
n FOMA/Xi antenna*1
o Wi-Fi/Bluetooth antenna*1
p Wi-Fi antenna*1
Before Using the Handset
Part names and functions
*1 The antenna of back is built into the main body. At sides of the
handset, the metal sections of surface are used as the antenna.
Covering the antenna area with your hand may influence the
quality.
*2 Do not cover the sensor area with your hand or paste a sticker
etc. on the sensor area. The sensor may not work properly.
*3 If the handset is equipped with a commercially available
corresponding cover, you can turn the display on/off by
opening/closing the cover. If you close the equipped cover
obliquely, the display may not be turned off.
Microphone
When using functions which support the microphone, do not
cover the hole of the microphone.
docomo nano UIM card
A docomo nano UIM card is an IC card that records personal
information, such as your phone number.
You cannot use functions such as the phone or packet
communication without inserting a docomo nano UIM card.
In Japan, you cannot call to the emergency number (110, 119 or
118) without inserting a docomo nano UIM card.
A docomo nano UIM card has a security code called PIN code
(nP. 73 “PIN code”).
The handset supports only docomo nano UIM card. If you have a
docomo mini UIM card, UIM or FOMA card, bring it to a docomo
Shop to replace.
Before inserting or removing the docomo nano UIM card, turn off
the power. Hold the handset securely with your hand.
1 docomo nano UIM card/microSD Card slot cover
2 docomo nano UIM card slot
The tray for inserting the docomo nano UIM card is stowed.
3 microSD Card slot
4 Grip sensor
5 Incoming/Charging lamp
6 GPS/TV antenna*1
7 Proximity sensor (upper part of the display)/Brightness
sensor*2
The proximity sensor (upper part of the display) detects the
distance to the face and prevents inadvertent operation of
touch panel during a call.
The brightness sensor detects the brightness of the
surrounding area and adjusts the brightness of the backlight.
8 Earpiece
13
SH-01H_E_02.fm
[13/29]
Before Using the Handset
SH-01H_E.book
15 ページ
２０１５年９月１５日
火曜日
午後１時２６分
■ Internal battery usable life
Charging
Internal battery is a consumable product. Battery life per charge
is gradually reduced every time the battery is charged.
When battery life per charge is reduced to approximately half of
the default time, this means that the internal battery is
approaching the end of its usable life. In this case, it is
recommended to replace the battery as soon as possible. For
details on replacing the internal battery, contact the number
listed in “Repairs” (in Japanese only) on the last page or a repair
counter that DOCOMO specifies.
If you watch TV etc. while charging for a long time, the usable life
of the internal battery may become shorter than estimated.
The internal battery is not fully charged at the time of
purchase. Be sure to charge the battery before use.
■ Cautions while charging
For details on the estimated charge time nP. 94 “Main
specifications”
The battery can also be charged with the handset turned on
(While charging, the battery icon appears with [w]
superimposed).
Do not charge for a long time with the power left turned on. If the
handset is left turned on after charging is complete, the internal
battery charge level decreases.
In this case, an AC or DC adapter (sold separately) charges the
battery again. However, depending on the time when the
handset is disconnected from the AC or DC adapter, the battery
charge level may be low or the battery may only be usable for a
short time.
If the handset is left for a long time even after the charging is
completed, the battery level may decrease.
When the battery is empty and the handset is being charged, the
charging lamp may not illuminate immediately. However,
charging is in progress.
If the battery empty alert is displayed and the power cannot be
turned on, charge the battery for a while.
While charging, the handset may not be turned on even when the
charging lamp is illuminated in red. Charge longer and try turning
the power on again.
Frequently recharging the battery when its power is still
remaining enough may shorten the usable life of the internal
battery. It is recommended to use the battery to a certain level
(e.g. after the battery level decreases) before recharging.
When the battery becomes warm, charging may automatically
stop even if the battery has not been fully charged. Charging
automatically resumes after the temperature lowers to an
appropriate temperature.
If you watch NOTTV, receive content, etc. while charging, move
the handset as far away as possible from the power plug section
of the AC adapter.
■ AC adapter and DC adapter
Refer to user's guide of AC Adapter 05 (sold separately) or DC
Adapter 04 (sold separately).
AC Adapter 05 covers from 100 to 240V AC.
The shape of the plug for the AC adapter is for 100V AC (for
domestic use). To use the AC adapter of 100 to 240V AC
overseas, a conversion plug adapter applicable to your country
of stay is required. Do not use a voltage converter for overseas
travel to charge the battery.
Charging with AC adapter/DC adapter
[Read the user's guides of AC Adapter 05 (sold
separately) and DC Adapter 04 (sold separately)]
Following operations describe how to charge with AC Adapter 05
or DC Adapter 04.
1 Insert the microUSB plug of the AC adapter/DC
adapter horizontally into the external connector
terminal on the handset with the side marked
with “B” turned up
: Check the direction (front or rear) of the microUSB plug and
insert it horizontally.
■ Estimated battery life when fully charged
Continuous
talk time
Continuous
stand-by time
Charging lamp
FOMA/3G
Approx. $$ min
GSM
Approx. $$ min
VoLTE (Voice call)
Approx. $$ min
External
connector terminal
FOMA/3G
At rest: Approx. $$ hr (Preferred network type:
LTE/3G/GSM(Auto))
GSM
At rest: Approx. $$ hr (Preferred network type:
LTE/3G/GSM(Auto))
LTE
At rest: Approx. $$ hr (Preferred network type:
LTE/3G/GSM(Auto))
NOTTV
watching time
Approx. $$ min
TV watching
time
Full-Seg: Approx. $$ min
1Seg: Approx. $$ min
Keep side marked with “B” up
microUSB plug
2 When you erect the AC adapter power plug and
insert it into an outlet or insert the DC adapter
power plug into a car cigarette lighter socket,
the charging lamp illuminates and charging
starts
For details on the battery life nP. 94 “Main specifications”
15
SH-01H_E_02.fm
[15/29]
Before Using the Handset
SH-01H_E.book
16 ページ
Power plug
２０１５年９月１５日
火曜日
午後１時２６分
■ Turning power off forcibly
100V AC
outlet
You can forcibly turn the power off if the screen does not respond or
the power cannot be turned off.
Power plug
1 H (for at least 8 seconds)
: Release your finger after the vibrator is activated to turn the
power off.
■ Turning display on/off
The display is turned off when H is pressed or the handset is not
in use for a set length of time.
Press H while the display is turned off to turn it on.
Cigarette
lighter socket
AC adapter
DC adapter
■ Touch panel lock
When charging is complete, the charging lamp
turns off
When the power or the display is turned on, the touch panel is
locked.
Touch [J] to unlock.
4 Remove the AC adapter power plug from the
outlet, or remove the DC adapter power plug
from the car cigarette lighter socket
5 Remove the microUSB plug of the AC adapter/
DC adapter horizontally from the external
connector terminal
Operations in touch panel lock screen
To set/disable the manner mode: y (for at least 2 seconds)
To turn on/off the mobile light: x (for at least 2 seconds)
To activate SH Camera: [K]
To activate しゃべってコンシェル (Shabette-Concier): [W]
To display the detailed information on notifications: Drag the
clock down
To display the status panel: Drag the status bar down
Note that inserting or removing the equipment forcibly may
cause damage to the external connector terminal and the
microUSB plug or result in a malfunction.
When using a DC adapter
The DC adapter should only be used in negative grounded
vehicles (12 and 24V DC).
The notifications are displayed in the lock screen of the touch
panel. You can make settings for displaying of notifications in
[When device is locked] (nP. 66 “Sound/notification”).
Do not use with the car engine shut off. May drain the car
battery.
The DC adapter fuse is a consumable product. For
replacement, purchase a new fuse at a nearest auto parts
retailer etc.
If you set [エモパー設定] (emopa settings) to ON, various
information delivered by emopa is displayed under the clock.
You can check related websites etc. or make settings for
emopa by touching and holding a piece of information
(nP. 69 “emopa”).
Refer to the user's guide of DC Adapter 04 for details.
Charging with Micro USB Cable 01
Mobile light
You can charge the handset by connecting the handset to a PC
with Micro USB Cable 01 (sold separately).
For details on connecting to a PC nP. 83 “Connecting the
handset and PC”
The mobile light may be automatically turned off if you use the
handset for a long time or the handset becomes warm after the
mobile light is turned on. Also, you may not be able to use the
mobile light if the handset is warm.
Turning power on/off
Basic operation
The followings describe basic operations of the handset such
as operations of the touch panel and navigation keys, and
operations for shooting screenshot.
■ Turning power on
1 H (for at least 2 seconds)
: When you turn the power on for the first time, make the initial
settings (nP. 22 “Initial settings”).
Operation of touch panel
■ Turning power off
The followings describe the operations to use the display
(touch panel).
Operations may differ depending on the function and screen in
use.
1 H (for at least 1 second)/[Power off]/[OK]
16
SH-01H_E_02.fm
[16/29]
Before Using the Handset
SH-01H_E.book
17 ページ
２０１５年９月１５日
火曜日
Cautions when using the touch panel
午後１時２６分
Operation while using function
The touch panel is designed to be lightly touched with your
finger. Do not forcefully press with your finger or a pointed
object (fingernail, ballpoint pen, pin, etc.).
In the following cases, the touch panel may not work even if
you touch it. May cause a malfunction.
Operation with a gloved finger*
Operation with the tip of a fingernail
Operation with foreign object placed on the operation pad
Operation on the touch panel on which a protective sheet,
sticker, etc. is put
Operation while the touch panel is wet
Operation with fingers wet with sweat, water, etc.
■ Navigation keys
Use the navigation keys displayed at the bottom of the screen to
perform the basic operations.
1 {/v: Back key/Close key
Return to the previous screen.
Close the keyboard.
2 |: Home key
Display the home screen.
3 }: Recent Apps key
Display Quick Launcher or Recent Apps (nP. 27 “Quick
Launcher”, P. 28 “Recent Apps”).
* When [glove mode] is set to ON, you can operate the touch
panel with gloves on.
Operations may be interrupted if you touch an area other than a
confirmation screen or the status bar while the confirmation
screen etc. is displayed.
■ Using user-aid function
You can quickly activate a corresponding app by sliding a
navigation key up.
■ Touch
1 Slide any of the navigation keys up/slide it to
Touch a key or an item displayed on the screen and then release
your finger from it to select or set it.
the left/right until [Google] is displayed
: If there are multiple apps supporting the user-aid function,
[q] is displayed and you can select an app to activate.
■ Full-screen shrink mode
You can reduce the screen to operate the handset with one hand.
■ Touch and hold
1 Slide any of the navigation keys up/slide it to
When you keep your finger on the touch panel, a menu may appear
depending on the function and screen in use.
the left/right until [r]/[p] is displayed
: Repeat the same operation as that done when reducing the
screen to return it to the original size.
: Touch [C] to move the reduced screen or change the size.
■ Slide (Swipe)/Drag
Move your finger while keeping it on the touch panel to scroll the
screen or move an icon, a widget, etc. to the desired position.
In addition, when you touch a menu or an item by mistake, move
your finger away from it to cancel the selection.
You may not be able to reduce the screen depending on the
screen being displayed.
The Full-screen shrink mode is disabled if you switch to
horizontal display or the display is turned off while the
Full-screen shrink mode is set.
■ Retrieving menu
When you touch [{]/[z]/[|] etc., slide the left edge of the screen to
the right or touch and hold the screen, functions (menus) available
in that screen appear.
■ Flick
Move your finger like sweeping the touch panel in the home screen
etc. to switch pages.
Example: App list screen
■ Pinch out/Pinch in
Menu
You may be able to zoom the screen in/out etc. by putting two
fingers on the touch panel and moving them with putting a distance
between two fingers apart (pinch out)/closer (pinch in) depending
on the function and screen in use.
■ Switching the settings
When a check box etc. is displayed beside the setting item, you can
set it enabled/disabled or ON/OFF by touching it.
17
SH-01H_E_02.fm
[17/29]
Before Using the Handset
SH-01H_E.book
23 ページ
２０１５年９月１５日
火曜日
4 Enter other items required by network
When you select an access point and connect to it with a wrong
password (security key), [IP Configuration Failure], [WiFi
Connection Failure], [Authentication problem] or [Connected
(Limited)] is displayed. Confirm the password (security key).
When [IP Configuration Failure] or [Connected (Limited)] is
displayed after entering the correct password (security key),
you may not have acquired the correct IP address. Connect to
the access point again after confirming signal status.
operators/[z]/[Save]
If the settings of MCC and MNC are changed and the added
access point disappears from the screen, reset the settings or
set the access point manually.
Resetting an access point
The registration process using WPS takes a few minutes. After
completion of the registration of the access point, check that the
proper connection to the access point is acquired.
Reset an access point to default setting.
1 In the home screen, [R]/[Settings]/[More]/
As for the manual registration of an access point, this function
supports WEP, WPA/WPA2 PSK and 802.1xEAP as the
security setting.
[Cellular networks]/[Access Point Names]
午後１時２６分
[z]/[Reset to default]
If you connect to an access point which is not connected to the
Internet, [5] is displayed and the communication may be
made by mobile networks, not Wi-Fi connection.
To make Wi-Fi communication by using such an access point,
enable [Using this AP without internet connection] of Advanced
options before connecting to the access point.
When sp-mode is not subscribed or if you fail to make
automatic setting of an access point due to signal status such
as outside the service area, you are required to set the access
point again manually.
Wi-Fi settings
■ Detailed settings
If you use Wi-Fi function of the handset, you can use mail or
Internet by connecting to access points of your home,
corporate network or public wireless LAN service.
1 In the home screen, [R]/[Settings]/[Wi-Fi]
2 [z]/[Advanced]
3 Select an item
Radio interference with Bluetooth devices
Wireless LANs (IEEE 802.11b/g/n) use the same frequency
band (2.4 GHz) as Bluetooth devices. Therefore, using the
wireless LAN device near a Bluetooth device may cause radio
interference, lowering of communication speed, noise or
connection failure. In this case, turn off the Bluetooth device or
keep the handset and the wireless LAN device at least
approximately 10 m away from the Bluetooth device.
 Network notification: Set whether to display a notification
icon when an open network is detected.
･ Set it after setting [Wi-Fi] to On.
 Scanning always available: Set whether to scan networks by
the location information service and other apps even when
[Wi-Fi] is set to Off.
 Wi-Fi sleep policy: Set whether to disconnect Wi-Fi when the
display is turned off.
 Avoid poor connections: Set whether to use the Wi-Fi
function only when stable Internet connections are available.
 Wi-Fi frequency band: Set the frequency band to use.
 Handover: Set whether to automatically switch access points
to use if you use the handset while moving.
 Mobile/Wi-Fi simultaneous use: Make settings for
simultaneous use of mobile and Wi-Fi networks.
 Install certificates: Install certificates.
 Wi-Fi Direct: Make settings for Wi-Fi Direct.
 Passpoint: Set whether to automatically connect to the
available Passpoint compatible access points when [Wi-Fi] is
set to On.
 MAC address: Confirm the MAC address.
 IP address: Confirm the IP address.
Packet communication is also available while [Wi-Fi] is set to On.
Wi-Fi connection is prioritized while Wi-Fi connection is set, but
the connection is automatically switched to that of LTE/3G/GPRS
network once Wi-Fi connection is terminated. Note that packet
communication charges may be incurred in this case.
Refer to the manual of your wireless LAN base unit when using
the access point at home etc.
Operate access point registration near the access point.
If you use the docomo service by using Wi-Fi function, set a
docomo ID (d ACCOUNT) in advance. In the home screen,
[R]/[Settings]/[docomo service/cloud]/[docomo ID設定] (Set
docomo ID) to set it.
1 In the home screen, [R]/[Settings]/[Wi-Fi]
2 Set to On
3 Select an access point
[Handover]
You can set it only when Wi-Fi frequency band is set to [5 GHz
only] or [2.4 GHz only] and Simultaneous use mode setting is
set to [Setting OFF].
: If you select an access point protected by security, enter the
password (security key) and select [CONNECT].
: To register access points manually: [z]/[Add network]/
enter the network name/set security/[SAVE]
: WPS compatible access points can be easily registered. In
the home screen, [R]/[Settings]/[Wi-Fi]/[z]/[Easy
Settings]/[WPS Push Button]/[WPS Pin Entry] to register an
access point.
: Alternatively, in the home screen, [R]/[Settings]/[Wi-Fi]/
[z]/[Easy Settings]/[AOSS] to connect to an access point.
Follow the instructions on the screen and operate after this
step.
■ Mobile/Wi-Fi simultaneous use
You can make settings for the function to automatically switch to
mobile networks when communications with Wi-Fi access points
slow down (Smooth change mode) or the function to download
content at high speed using mobile and Wi-Fi networks at the same
time (Dual Speed mode).
Set [Wi-Fi] to On and connect to an access point in advance.
Since packet communication is also used when you use mobile
and Wi-Fi networks at the same time, packet communication
charges may be incurred.
1 In the home screen, [R]/[Settings]/[Wi-Fi]
2 [z]/[Advanced]
23
SH-01H_E_02.fm
[23/29]
Before Using the Handset
SH-01H_E.book
35 ページ
２０１５年９月１５日
火曜日
午後１時２６分
Entering touch-tone signals
Call
When using services in which you are required to enter
numbers additionally during a call, such as inquiry about the
balance in your bank account or ticket reservation, enter
pause (,)/wait (;) after entering a phone number to make a call
with an additional number added to the main phone number.
You can use the phone and phonebook, and make settings for
call, voice/answering memo, operations available when calls
are received, etc.
Making a call
■ Adding 2 seconds pause
1 In the home screen, []]/[Dial]
2 Enter a phone number
After making a call to a main phone number, the handset
automatically pauses for 2 seconds and an additional number is
sent.
: Always enter the city code, even when it is a local number.
: You can set to notify/not to notify the other party of your
phone number for each call by adding “186”/“184” to the
head of the phone number.
1 In the home screen, []]/[Dial]
2 Enter a phone number/[}]/[Add 2-sec pause]
3 Enter a number to send/[0]
■ Adding wait
After making a call to a main phone number, the handset
automatically waits and then a screen asking whether to send an
additional number is displayed. Touch [Yes] to send an additional
number.
1 In the home screen, []]/[Dial]
2 Enter a phone number/[}]/[Add wait]
3 Enter a number to send/[0]
4 [Yes] during the call
1 Call
Make a call. Also, if there are outgoing call history items,
touch it to enter the latest one when the phone number
has not been entered.
2 Favorites
Display the contacts set as favorites.
3 Delete
Delete an entered number.
Touch and hold it to delete all the entered numbers.
4 Register
5 Dial
Display the dial screen.
6 Outgoing/Incoming call history
7 Phonebook
Display the phonebook.
Video call
By using video call, you and the other party can talk on the
handset while seeing each other's image. Also, you can switch
between voice call and video call while talking on the handset.
Call charges and packet communication charges are incurred
when making a video call. In addition, packet communication
charges are incurred also when receiving a video call.
Quality of image may differ depending on the usage
environment because suitable communication levels are
applied according to the usage condition.
If you cannot switch to a video call during a voice call,
[Switching to video call failed] is displayed and the voice call
continues.
3 [0]
: To make a video call: [}]/[Video call]
4 [END CALL] to end the call
Be careful not to cover the speaker section during a video call.
The other party's voice may not be heard well.
If you talk on the handset with your hair put between the
earpiece and your ear, the proximity sensor (upper part of the
display) may not work properly. The screen may be kept turned
on and the call may be interrupted when the screen is touched
accidentally.
While using video call in the background, your image is not sent
to the other party.
As for image displayed during a video call, since processes for
displaying image may differ depending on the model to use,
ranges of your image displayed on the handset may differ from
those displayed on the other party's device.
VoLTE
VoLTE enables you to use call and video call of high quality.
When you use VoLTE, the handset and the other party's device
need to satisfy the following conditions.
They are VoLTE compatible models
They are inside the VoLTE available area
Preferred network type is set to [LTE/3G/GSM(Auto)]/[LTE/
3G] (nP. 86 “Preferred network type”)
Call mode setting is set to [VoLTE ON] (nP. 38 “Call
settings/Other”)
35
SH-01H_E_04.fm
[35/41]
Call
SH-01H_E.book
36 ページ
２０１５年９月１５日
火曜日
Answering a call
Emergency call
Emergency calls
午後１時２６分
1 When a call is received, the ringtone sounds
Phone number
Police
110
Fire and ambulance
119
Marine emergency
118
and the incoming lamp flashes
Incoming lamp
The handset supports “Emergency call location notification”.
When you make a call to an emergency number such as 110,
119 and 118, the information of your location (location
information) is automatically notified to the agency that has
received the emergency call (e.g. the police station). Depending
on your location and the reception status of the signal, the
agency that has received the emergency call may not be able to
confirm the exact location.
If you are not sending your caller ID by calling with “184” added
or other means, your location information and phone number
are not notified. However, if the agency that has received the
emergency call considers your location information and phone
number necessary for important purposes, such as life saving,
the agency may retrieve them regardless of your settings.
In addition, the area/timing to introduce “Emergency call
location notification” depends on the state of preparation in
each agency that receives emergency calls.
2 Answer the call
: Operate after touching [3].
Incoming voice call screen
Incoming video call screen
1 Reject call with SMS
Reject the incoming call and send a selected SMS
message to the other party.
2 Reject
Reject the incoming call.
3 Accept
Answer the call.
4 Accept voice
Answer the call using voice call.
5 Accept video
Answer the call using video call.
In Japan, you cannot make a call to the emergency number
(110, 119 or 118) when a docomo nano UIM card is not
inserted, while the PIN code is locked, from the PUK (PIN
Unlock Key) entry screen.
When calling 110, 119 and 118 from your handset, the police or
fire stations may return your call for verification purposes. State
that you are calling from a mobile phone, and give your phone
number and exact present location.
Remain stationary to ensure that the call is not disconnected
while you are on the line, and keep the handset turned on to
receive calls for approximately 10 minutes afterwards.
3 [END CALL] to end the call
Depending on the region, calls to the police or fire station of the
local area may not be made.
■ Answering a call while display is turned on
When you make a call to the emergency number (110, 119 or
118) while Reject call setting is set, items of Reject call setting
are set to [OFF].
When a call is received while a screen other than lock screen of the
touch panel is displayed, the incoming notification is displayed. You
can answer the call by using the notification.
Emergency call may not be available in some networks.
1 When a call is received, the incoming
You cannot make a video call to the emergency number (110,
119 or 118).
notification is displayed at the top of the screen
2 [ACCEPT]/[ACCEPT VIDEO]
: Touch the incoming notification to display incoming voice
call/video call screen.
: Flick the incoming notification to the left/right to hide the
notification.
International call (WORLD CALL)
WORLD CALL is an international calling service available from
DOCOMO devices in Japan.
The caller ID may not be notified or displayed correctly
depending on overseas network operators. In this case, making
a call with incoming call history is not available.
■ Placing a call on hold
1 When a call is received, the ringtone sounds
[Calling Method]
When calling to a land-line phone: 010/country code/area
code (city code)/the other party's phone number/[0]
When calling to a mobile phone: 010/country code/the other
party's mobile phone number/[0]
･ As for the other parties' mobile phone numbers and area codes
(city codes) that begin with “0”, omit the first “0” when entering
(except some countries or regions such as Italy).
･ Alternatively, enter “009130-010” as usual or “+” instead of
“010”.
and the incoming lamp flashes
2 [z]/[Put a caller on hold]
■ Answering a video call without sending your own
image
1 When a video call is received, the ringtone
sounds and the incoming lamp flashes
2 [z]/[Camera OFF response]
■ Answering by answering memo
1 When a call is received, the ringtone sounds
and the incoming lamp flashes
36
SH-01H_E_04.fm
[36/41]
Call
SH-01H_E.book
41 ページ
２０１５年９月１５日
火曜日
午後１時２６分
■ Selecting accounts to display
■ Grouping/Ungrouping contacts
1 In the home screen, select “ドコモクラウド”
1 In the home screen, select “ドコモクラウド”
2 [|]/[Settings]/[Accounts to display]
3 Select an item/[OK]
2 Select a group
3 [Delete member]/[Add member]
4 Select names/[OK]/[OK]
(docomo cloud) folder/[docomo
phonebook]/[Contacts]
(docomo cloud) folder/[docomo
phonebook]/[Group]
: To customize an account to display: [Customize...]/select
accounts/select groups/[OK]
The group function is available on contacts created with a
docomo/Google account etc.
Deleting phonebook
1 In the home screen, select “ドコモクラウド”
My profile
(docomo cloud) folder/[docomo
phonebook]/[Contacts]
You can display your phone number registered on the docomo
nano UIM card. You can also register your name, mail
addresses, etc.
2 [}]/[Delete]
3 Select names/[OK]/[OK]
1 In the home screen, select “ドコモクラウド”
: To delete all items: [Select all]/[OK]/[OK]
(docomo cloud) folder/[docomo
phonebook]/[My profile]
Editing phonebook
2 Check/Use the profile
1 In the home screen, select “ドコモクラウド”
(docomo cloud) folder/[docomo
phonebook]/[Contacts]
2 Select a name
3 [Edit]
4 Set each item/[Save]
: For details on each item that can be set nP. 40 “Adding
contacts to phonebook”
1 Image
2 Registered content
3 Notice
Make settings for Friends notice.
Available only when you are using cloud computing.
4 Edit
Using groups
1 In the home screen, select “ドコモクラウド”
(docomo cloud) folder/[docomo
phonebook]/[Group]
2 Use groups
■ Editing My profile
1 In the home screen, select “ドコモクラウド”
(docomo cloud) folder/[docomo
phonebook]/[My profile]
2 [Edit]
3 Set each item/[Save]
Backing up/Restoring phonebook
1 Account
2 Group icon
3 Group name
4 Add group
Add a group.
5 Groups
6 Number of contacts registered in the group
7 Sort
You can back up/restore the phonebook by using docomo
backup.
For details on backing up/restoring phonebook by using docomo
backup nP. 65 “Backing up to/Restoring from a microSD Card”
You cannot sort groups other than ones created with a docomo
account.
41
SH-01H_E_04.fm
[41/41]
Call
SH-01H_E.book
42 ページ
２０１５年９月１５日
火曜日
午後１時２６分
1 Image
Displayed if an image of the other party is registered in
the phonebook. Touch to display the registered content of
the phonebook. If the person is not registered in the
phonebook, you can register the person in the phonebook
after touching it.
2 Destination/Sender
3 Number of unread messages
4 New message
5 Mail search
6 Number of messages in thread
7 Date and time of the message exchange
Mail/Web Browser
You can send and receive messages using docomo mail, SMS,
Gmail, etc., and display websites using Chrome.
docomo mail
You can send and receive mails using mail address of
DOCOMO (@docomo.ne.jp). Data can be easily transferred
when you have changed models or restored when you have
lost the handset since sent and received mails are saved on
the docomo mail server. Also, you can send, receive and view
mails using the same mail address from multiple devices such
as a tablet, PC browser, etc. if you use a docomo ID
(d ACCOUNT).
For details on docomo mail, refer to the DOCOMO website.
3 Check the message
1 In the home screen, [^]
: Follow the instructions on the screen and operate after this
step.
SMS
You can send and receive text messages with mobile phone
numbers serving as destinations.
※For details on the number of characters which can be sent and
received etc., refer to “Short Message Service (SMS)” on the
DOCOMO website.
You can also exchange messages with those who use network of
overseas network operators. Refer to the DOCOMO website for
information on countries where this service is available and
available overseas network operators.
1 Destination/Sender
2 Phone call
3 Date and time of the message exchange
4 Message
Replying message
1 In the home screen, [R]/[Messaging]
2 [0]
3 Enter the destination and message/[@]
1 In the home screen, [R]/[Messaging]
2 Select a thread
3 Enter the message/[@]
You can switch Default SMS app to Hangouts
(nP. 71 “More”).
Forwarding message
If destinations are devices owned by those who use network of
overseas network operators, enter “+”, the country code and the
recipient's mobile phone number. If the phone number begins
with “0”, omit the first “0”. Alternatively, enter “010”, the country
code and the phone number.
1 In the home screen, [R]/[Messaging]
2 Select a thread
3 Touch and hold a message/[Forward]
4 Enter the destination and message/[@]
Half-width katakana and special symbols in SMS messages
may not appear correctly for recipient.
SMS cannot be sent when “186” or “184” is added.
Deleting message
1 In the home screen, [R]/[Messaging]
2 Select a thread
3 Touch and hold a message/[Delete]/[Delete]
Displaying message
2 Select a thread
In the home screen, [R]/[Messaging]
: Messages are grouped into threads according to their
destinations/senders and displayed.
Deleting thread
1 In the home screen, [R]/[Messaging]
: To delete all threads: [|]/[Delete all threads]/[Delete]
2 Touch and hold a thread/[1]/[Delete]
42
SH-01H_E_05.fm
[42/47]
Mail/Web Browser
SH-01H_E.book
43 ページ
２０１５年９月１５日
火曜日
午後１時２６分
Depending on the signal status etc., characters may not appear
correctly on the screen of the other party's device.
Setting Messaging
1 In the home screen, [R]/[Messaging]
2 [z]/[Settings]
3 Select an item
Attaching file
Files of up to approximately 5 MB can be attached. There are
no limits to the number of files to be attached.
Depending on the receiving side device, files may not be
received or correctly displayed/played. Also, the quality of
videos may deteriorate or videos may be converted to
continuous still pictures.
SMS Enabled: Set an app to send and receive SMSs with.
Delete old messages: When the number of saved messages
reaches its limit, messages are automatically deleted from
the oldest one.
Text message limit: Set the number of messages to be saved
by thread.
Delivery reports: Notify you that sent messages have been
received every time a message is received.
Manage SIM card messages: Manage messages saved on
the docomo nano UIM card.
Notifications: Notify you that messages have been received
on the status bar.
Sound: Set the ringtone to be rung when a message is
received.
Vibrate: Set the vibrator to be activated when a message is
received.
Displaying mail
The screen may appear different depending on the account to
use.
1 In the home screen, [R]/[Email]
2 Select a mail
[Delivery reports]
When you send a message to mobile phones of other carriers,
the notification for confirming that it has been received may not
be sent to you.
Email
1 Box name/Folder name being displayed
Touch [/] to switch or set folders/accounts.
2 Mails
The characters of sender or subject are displayed in thin
characters when a mail is read.
Touch images to checkmark the mails and you can set
them to be deleted/unread/read etc. collectively.
3 Mail search
4 Star icon
Use it as a mark indicating that the mail is special or
supposed to be dealt with later.
You can check starred mails in the Starred folder.
5 Newly compose mail
You can send and receive mails by setting up a mail account
provided by a service provider.
Set up an account in advance (nP. 24 “Setting up mail
account”).
1 In the home screen, [R]/[Email]
2 [(]
3 Compose a mail
3 Check the mail
1 Account
If you set up multiple accounts, you can switch accounts.
2 Destination
When you enter part of a mail address or a name
registered in the phonebook, destination candidates are
displayed.
3 Subject
4 Message
5 File attachment
6 Add destinations
Touch it to add Cc or Bcc.
1 Subject
2 Sender/Destination
If the sender is registered in the phonebook, the
registered information of the phonebook is displayed after
touching the image. If the person is not registered in the
phonebook, you can register the person in the phonebook
after touching the image.
3 Date and time of reception
Touch to display/hide the details of sender, destination or
date and time of reception.
4 [,]
Some receiving side models may not be able to receive the
subject completely.
Mails sent from a Gmail account are treated as ones from a PC.
When receiving side models set PC-mail rejection, mails cannot
be sent.
Mails that could not be sent for any reason will be saved in
Unsent folder as unsent mails.
43
SH-01H_E_05.fm
[43/47]
Mail/Web Browser
SH-01H_E.book
44 ページ
２０１５年９月１５日
火曜日
4 Message
5 Attached file
6 Star icon
Use it as a mark indicating that the mail is special or
supposed to be dealt with later.
You can check starred mails in the Starred folder.
7 Menu of each mail
Touch to reply to all, forward or print by mail.
8 Reply
9 Delete
a Unread
午後１時２６分
Gmail
You can use a mail service provided by Google or Email
provided by general service providers.
If you have not set up a Google account or Email account, follow
the instructions on the screen and set.
1 In the home screen, select “Google” folder/
[Gmail]
2 [(]
3 Compose a mail
Replying/Forwarding mail
1 In the home screen, [R]/[Email]
2 Select a mail
3 [)]
: To reply to all: [{] of each mail/[Reply all]
: To forward: [{] of each mail/[Forward]
1 Account
If you set up multiple accounts, you can switch accounts.
2 Destination
When you enter part of a mail address or a name
registered in the phonebook, destination candidates are
displayed.
3 Subject
4 Message
5 File attachment
6 Add destinations
Touch to add Cc or Bcc.
4 Compose a mail
4 [,]
1 Reply type
Touch to switch Reply/Reply all/Forward.
2 Destination
3 Message
4 Quote text
Touch to display/hide the mail of the sender.
You cannot operate it when forwarding mails.
5 Mail of sender
6 Subject
7 Respond inline
Enter the mail of the sender in the message.
Displaying mail
1 In the home screen, select “Google” folder/
[Gmail]
2 Select a thread
: In Gmail, mails are grouped into threads by reply and displayed.
If new mails are replied ones of an existing mail, they are
grouped into the same thread. A new thread is created for newly
composed mails or mails whose subjects have been changed.
5 [,]
Deleting mail
1 In the home screen, [R]/[Email]
: To delete selected mails: Touch the images of mails/[+]/
[OK]
2 Select a mail
3 [+]/[OK]
1 Box name/Label name being displayed
Touch [/] to switch or set displaying types/accounts.
2 Threads
The characters of destination/sender or subject are
displayed in thin characters when all mails in thread are
read.
Touch images to checkmark the threads and you can set
them to be archived/deleted/unread/read etc. collectively.
3 Mail search
4 Number of mails in thread
5 Star icon
Use it as a mark indicating that the thread is special or
supposed to be dealt with later.
You can check starred threads in the Starred folder.
Setting Email
1 In the home screen, [R]/[Email]
2 [/]/[Settings]
3 Select an item
General settings: Make settings for the whole Email.
Add account: Add account.
Privacy policy: Check the privacy policy.
: Select an account to make settings for the details on the
account such as Signature and Email notifications.
44
SH-01H_E_05.fm
[44/47]
Mail/Web Browser
SH-01H_E.book
81 ページ
２０１５年９月１５日
火曜日
午後１時２６分
■ Setting Bluetooth
Using Bluetooth function
Set after setting [Bluetooth] to On.
To register/connect a Bluetooth device, the Bluetooth passkey
may need to be entered. Before starting the registration, decide
one- to sixteen-digit number. Enter the same number on the
handset and the other party's Bluetooth device.
Set the other party's Bluetooth device to the registration stand-by
status in advance.
1 In the Bluetooth screen, [z]
2 Select an item
 Refresh: Search for the Bluetooth device.
 Rename this device: Change the handset's name.
 aptX: Set whether to use aptX®.
 Handsfree setting: Set whether to always have voices output
from the connected Bluetooth compatible hands-free device
during a voice call.
 Show received files: Display the history of data received via
Bluetooth connection.
1 In the home screen, [R]/[Settings]/
[Bluetooth]
2 Set to On
3 Select a Bluetooth device/[PAIR]
[aptX]
: The confirmation screen for connection may be displayed.
: Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device. Also, some
Bluetooth devices may start connection after completing
registration.
: To search for Bluetooth devices: [z]/[Refresh]
: Touch [B] of a paired Bluetooth device to set name and
intended purpose of the other party's Bluetooth device.
When you enable [aptX], sounds may not be output depending
on the Bluetooth device. In this case, disable [aptX].
Sending and receiving by Bluetooth
■ Sending data
Example: Still picture
1 In the home screen, [R]/[Contents
You can connect up to seven Bluetooth devices at the same
time. Bluetooth devices may not work properly or the number of
Bluetooth devices which can be connected at the same time
may differ depending on the profile.
Manager]/[Photo]
2 Touch and hold a still picture/[Share]/
[Bluetooth]
If you fail to connect a Bluetooth device, connection may
become available after re-registering it.
: Set the receiver's Bluetooth device to the reception stand-by
status.
When [Bluetooth] is set to On, the handset is set to receive
registration requests/connection requests from other Bluetooth
devices. Make the setting for displaying the handset's
information on other Bluetooth devices in advance to allow the
handset to be searched for by other Bluetooth devices.
3 Select a Bluetooth device to connect to
■ Receiving data
While in connection stand-by, even if a connection request from
a Bluetooth device is received, connection may not be made
depending on the signal status etc.
1 Data is sent from the sender's Bluetooth device
2 Drag the status bar down/select the incoming
For details on the operations of the other party's Bluetooth
device, refer to the manuals of the Bluetooth device to be used.
3 Drag the status bar down/select the received
notification/[ACCEPT]
data
■ When receiving registration request from Bluetooth
device or connection request from unregistered
Bluetooth device
Note that if you select [Delete and register] when receiving all
data, all data registered to the target function are deleted.
1 Registration request/Connection request from
Receiving all data may not be available depending on the data
type.
2 Drag the status bar down/[Pairing request]/
When available space in the save destination becomes
insufficient while receiving data, the data being received to that
point are saved and receiving ends.
Bluetooth device
[PAIR]
: When the confirmation screen about the settings on pairing
appears, select [PAIR].
: Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device.
: The confirmation screen for connection may be displayed.
■ Unregistering Bluetooth device
1 In the Bluetooth screen, [B] of the Bluetooth
device to unregister/[FORGET]
■ Disconnecting Bluetooth device
1 In the Bluetooth screen, select the Bluetooth
device to disconnect/[OK]
81
SH-01H_E_09.fm
[81/82]
Data Communication
SH-01H_E.book
96 ページ
２０１５年９月１５日
火曜日
Specific Absorption Rate (SAR) of
Mobile Phones
European RF Exposure Information
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were
developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all
persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is
2 W/kg and the highest SAR value for this device when tested at
the ear is 1.300 W/kg* and when worn on the body is 0.328 W/kg*.
For body-worn operation, this mobile device has been tested and
meets the RF exposure guidelines when used with an accessory
containing no metal and positioning the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure
compliance with RF exposure guidelines.
As SAR is measured utilizing the devices highest transmitting
power the actual SAR of this device while operating is typically
below that indicated above. This is due to automatic changes to the
power level of the device to ensure it only uses the minimum level
required to reach the network.
This model SH-01H mobile phone complies with Japanese
technical regulations and international guidelines regarding
exposure to radio waves.
This mobile phone was designed in observance of Japanese
technical regulations regarding exposure to radio waves (*1) and
limits to exposure to radio waves recommended by a set of
equivalent international guidelines. This set of international
guidelines was set out by the International Commission on
Non-Ionizing Radiation Protection (ICNIRP), which is in
collaboration with the World Health Organization (WHO), and the
permissible limits include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health
condition.
The technical regulations and international guidelines set out limits
for radio waves as the Specific Absorption Rate, or SAR, which is
the value of absorbed energy in any 10 grams of tissue over a
6-minute period. The SAR limit for mobile phones is 2.0 W/kg. The
highest SAR value for this mobile phone when tested for use at the
ear is 1.06 W/kg and when worn on the body is 0.487 W/kg (*2).
There may be slight differences between the SAR levels for each
product, but they all satisfy the limit.
The actual SAR of this mobile phone while operating can be well
below that indicated above. This is due to automatic changes to the
power level of the device to ensure it only uses the minimum
required to reach the network. Therefore in general, the closer you
are to a base station, the lower the power output of the device.
This mobile phone can be used in positions other than against your
ear. Please keep the mobile phone farther than 1.5 cm away from
your body by using such as a carrying case or a wearable
accessory without including any metals. This mobile phone satisfies
the technical regulations and international guidelines.
The World Health Organization has stated that “a large number of
studies have been performed over the last two decades to assess
whether mobile phones pose a potential health risk. To date, no
adverse health effects have been established as being caused by
mobile phone use.”
Please refer to the WHO website if you would like more detailed
information.
(http://www.who.int/docstore/peh-emf/publications/facts_press/
fact_english.htm)
Please refer to the websites listed below if you would like more
detailed information regarding SAR.
* The tests are carried out in accordance with international
guidelines for testing.
Declaration of Conformity
In some countries/regions including Europe, there are restrictions on the use
of 5GHz WLAN that may limit the use to indoors only.
If you intend to use 5GHz WLAN on the device, check the local laws and
regulations beforehand.
Hereby, Sharp Telecommunications of Europe Ltd, declares that this
SH-01H is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
A copy of the original declaration of conformity can be found at the
following Internet address:
(http://www.sharp.co.jp/k-tai/)(in Japanese only)
FCC Notice
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment.
Ministry of Internal Affairs and Communications Website:
(http://www.tele.soumu.go.jp/e/sys/ele/index.htm)
Association of Radio Industries and Businesses Website:
(http://www.arib-emf.org/01denpa/denpa02-02.html)(in Japanese
only)
NTT DOCOMO, INC. Website:
(https://www.nttdocomo.co.jp/english/product/sar/)
SHARP Corporation Website:
(http://k-tai.sharp.co.jp/support/sar/)(in Japanese only)
*1 Technical regulations are defined by the Ministerial Ordinance
Related to Radio Law (Article 14-2 of Radio Equipment
Regulations).
*2 Including other radio systems that can be simultaneously used
with Xi/FOMA.
Information to User
This equipment has been tested and found to comply with the limits
of a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation; if this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient/relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
96
SH-01H_E_12.fm
[96/99]
午後１時２６分
Appendix/Index
SH-01H_E.book
97 ページ
２０１５年９月１５日
火曜日
4. Consult the dealer or an experienced radio/TV technician for
help.
午後１時２６分
Export Administration
Regulations
5 GHz WLAN Operation in USA
Within the 5.15-5.25 GHz band, UNII devices are restricted to
indoor operations to reduce any potential for harmful interference to
co-channel Mobile Satellite Services (MSS) operations.
The Japan Export Administration Regulations (“Foreign
Exchange and Foreign Trade Act” and its related laws) may be
applied to this product and its accessories under certain
conditions. The Export Administration Regulations may also
be applied. To export or reexport the handset and its
accessories, conduct all legally required procedures at your
own risk and expense. For details on the procedures, contact
the Ministry of Economy, Trade and Industry or the US
Department of Commerce.
FCC RF Exposure Information
Your handset is a radio transmitter and receiver.
It is designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg.
The tests are performed in positions and locations (e.g., at the ear
and worn on the body) as required by the FCC for each model. The
highest SAR value for this model handset when tested for use at
the ear is 0.92 W/kg and when worn on the body, as described in
this user guide, is 0.40 W/kg.
For body worn operation, this phone has been tested and meets the
FCC RF exposure guidelines. Please use an accessory designated
for this product or an accessory which contains no metal and which
positions the handset a minimum of 1.5 cm from the body.
The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be
avoided.
The FCC has granted an Equipment Authorization for this model
handset with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model handset is on file with the FCC and can be found under the
Display Grant section of (http://transition.fcc.gov/oet/ea/fccid/)after
searching on FCC ID APYHRO00225.
Additional information on Specific Absorption Rates (SAR) can be
found on the FCC website at (http://www.fcc.gov/encyclopedia/
radio-frequency-safety).
Intellectual Property Right
Copyrights and rights of portrait
Data with third party copyrights such as text, images, music and
software that is downloaded via Internet websites, acquired by
TV, video, etc. or shot by the handset cannot be duplicated,
altered or publicly transmitted without rightful party's consent.
Only duplicating, quoting, etc. for personal use are permitted
under the Copyright Act.
Even if for personal use, filming and recording may be prohibited
for stage performances, shows, exhibitions, etc.
Also, shooting another's image or posting another's image on
Internet websites without his/her consent may constitute a
violation of one's right to his/her image.
Registered trademarks and trademarks
FCC ID Location
The device is electronically labeled and the FCC ID can be
displayed via the About phone & the Authentication under the Settings
menu.
“FOMA”, “dmenu”, “dmarket”, “おサイフケータイ”, “トルカ”,
“ToruCa”, “mopera U”, “i-appli”, “i-mode”, “iD”, “WORLD WING”,
“WORLD CALL”, “ｉコンシェル”, “sp-mode”, “Xi”, “eトリセツ”,
“しゃべってコンシェル”, “フォトコレクション”, “LIVE UX”, the
“ToruCa” logo, the “iD” logo, the “i-concier” logo, the
“Osaifu-Keitai” logo, the “Area Mail” logo, the “Media Player”
logo, the “Phonebook” logo, the “dmenu” logo, the “Anshin
Enkaku Support” logo, the “Shabette-Concier” logo, the “docomo
backup” logo, the “My magazine” logo, the “d book MyShelf” logo
and “d POINT” logo are trademarks or registered trademarks of
NTT DOCOMO, INC.
“Catch Phone (Call waiting service)” is a registered trademark of
Nippon Telegraph and Telephone Corporation.
Microsoft®, Windows®, Windows Media® and Windows Vista®
are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Oracle and Java are registered trademarks of Oracle and/or its
affiliates.
Other names may be trademarks of their respective owners.
QR code is a registered trademark of Denso Wave Inc.
microSD Logo, microSDHC Logo and microSDXC Logo are
trademarks of SD-3C, LLC.
The handset features LCFONT, developed by Sharp
Corporation, to make the LCD easier to view and read. LCフォン
ト/LCFONT and
Corporation.
are registered trademarks of Sharp
OBEX™ is a trademark of Infrared Data Association®.
a is a registered trademark of FeliCa Networks, Inc.
This product includes ZIRENE SOUND of AM3D A/S in
Denmark.
ZIRENE SOUND is a registered/trade mark of AM3D A/S.
97
SH-01H_E_12.fm
[97/99]
Appendix/Index
SH-01H_E.book
99 ページ
２０１５年９月１５日
火曜日
午後１時２６分
Windows 7 stands for Microsoft® Windows® 7 (Starter, Home
Basic, Home Premium, Professional, Enterprise and Ultimate).
Windows Vista stands for Windows Vista® (Home Basic,
Home Premium, Business, Enterprise and Ultimate).
The Bluetooth word mark and logos are owned by the Bluetooth
SIG, INC. and any use of such marks by NTT DOCOMO, INC. is
under license. Other trademarks and trade names are those of
their respective owners.
Google, Google logo, Android, Google Play, Google Play logo,
Google+, Google+ logo, Gmail, Gmail logo, Google Calendar™,
Google Calendar logo, Google Maps™, Google Maps logo,
Google Chrome™, Google Chrome logo, Google Voice Search™,
Google Voice Search logo, YouTube, YouTube logo, Google
Drive, Google Drive logo and Google Now are trademarks of
Google Inc.
Open source software
This product includes software based on GNU General Public
License (GPL), GNU Lesser General Public License (LGPL) and
other licenses.
For details on licenses of related software, in the home screen,
[R]/[Settings]/[About phone]/[Legal information]/[Open
source licenses].
Source codes of software based on GPL, LGPL and Mozilla
Public License (MPL) can be referred to on the following website
for free. For details, refer to the following website.
https://sh-dev.sharp.co.jp/android/modules/oss/)(in Japanese
only)
Unlocking SIM lock
The handset can unlock the SIM lock. Unlock the SIM lock to use
non-DOCOMO SIM cards.
Some services, functions, etc. may be unavailable. DOCOMO
shall not guarantee any operation of the handset.
For details on the procedure of unlocking SIM lock, refer to the
DOCOMO website.
1 Insert another carrier's SIM card
: For details on how to insert/remove the SIM card
(nP. 13 “docomo nano UIM card”)
2 Turn the power on
3 Enter the SIM unlock code/[Unlock]
99
SH-01H_E_12.fm
[99/99]
Appendix/Index
SH-01H_E.book
106 ページ
２０１５年９月１５日
火曜日
Using mobile phone with your manners!
Please be considerate of those around you when using the handset.
Turn off your handset in the following places
 When in an area where use is prohibited
When you are on an airplane or in a hospital, follow the instructions given by
the respective airlines or medical facilities. Turn off the handset in areas
where the use of mobile phones is prohibited.
Set Public Mode in the following places
午後１時２６分
Carrying out various procedures, checking
subscription, etc. online
From the handset dmenu/お客様サポート (Support)/ドコモオ
ンライン手続き (docomo online procedure) (in Japanese only)
From a PC My docomo (https://www.nttdocomo.co.jp/mydocomo/)
/select an item on “ドコモオンライン手続き”(docomo online
procedure) (in Japanese only)
※ You may not be able to access some website services due to system
maintenance, the content of your subscription, etc.
※ “Network security code” or “ID/Password” is required to use “ドコモオ
ンライン手続き” (docomo online procedure).
 While driving
Using the handset in hand while driving is regarded as a punishable act.
However, some cases such as when rescuing sick and injured people or
maintaining public safety are exempted.
 When in public places such as theaters, movie theaters or
museums
Using the handset in public places where you should be quiet results in
disturbing others.
Be aware of the place to use a mobile phone and the
volume of your voice and ringtone
 Be aware of the volume of your voice when using the handset in
quiet places such as restaurant and hotel lobby.
 Use in places where you do not block a passage in the town.
Be considerate of the privacy of the individuals around
you
 Please be considerate of the privacy of individuals around you
when taking and sending photos using camera-equipped device.
Do not use your smartphone while walking
 Using your smartphone while walking on a platform of a train
station, street, etc. may narrow your vision and cause a collision.
 Use your smartphone in a safe place after you stop walking.
These functions ensure manners in public
The handset has convenient functions such as setting not to
answer a call and setting to mute sound of the handset.
Manner mode (nP. 67 “Mode settings”)
Mutes sound of the handset.
※ However, the manner mode cannot mute camera shutter sound.
Public Mode (Phone OFF) (nP. 39 “Network service”)
When a call is received, a message stating that you are in a place that does
not allow the use of mobile phone is played and the call is automatically
disconnected.
Phone vibration (nP. 66 “Sound/notification”)
Notifies you of incoming call with vibration.
Answering memo (nP. 38 “Voice/Answering memo”)
Records callers' messages when you cannot answer the call.
※ Additionally, optional services such as Voice Mail Service
(nP. 39 “Network service”) and Call Forwarding Service
(nP. 39 “Network service”) are available.
We collect your unnecessary mobile phones and
other devices irrespective of carrier. Bring them to a
docomo Shop near you.
※ Intended devices: Mobile phone, PHS, battery
pack, charger and desktop holder (irrespective of
carrier)
SH-01H_E_14.fm
[106/106]
~~~~~ ~~~~~ ~~~~~
~~~~~ ~~~~~

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2015:09:15 14:46:43+09:00
Modify Date                     : 2015:09:15 17:41:41+09:00
Has XFA                         : No
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:09:15 17:41:41+09:00
Format                          : application/pdf
Document ID                     : uuid:a362f1ad-bfc0-40ef-9a77-c509e206316f
Instance ID                     : uuid:a24a8fba-5cd2-49c5-8c00-e2e1a8d22f30
Page Mode                       : UseNone
Page Count                      : 25

EXIF Metadata provided by EXIF.tools