Sharp HRO00238 LTE, WCDMA, GSM Smart phone with Bluetooth, WLAN and GPS User Manual 08 1 Operation Manual APYHRO00238 Part 1

Sharp Corporation LTE, WCDMA, GSM Smart phone with Bluetooth, WLAN and GPS 08 1 Operation Manual APYHRO00238 Part 1

08-1 Operation Manual APYHRO00238 - Part 1

i
Preface
Thank you for buying the "BASIO 2" (called the "SHV36" or the
"product" from here on).
Before using the product, be sure to read the Basic Manual (this
manual) available on the au website for proper use. After reading this
PDF, save it in a convenient location or print and keep it in a convenient
place for future reference.
List of Packaged Items
Before using the product, make sure that you have all the following
packaged items.
SHV36
Desktop holder
(SHV36PUA)
保証書 (Warranty)
(Japanese)
•かんたんマニュアル
(Kantan Manual) (Japanese)
* The desktop holder (SHV36PUA) is not waterproof/dustproof.
The following items are not included in the package.
•
microSD memory card
•
Earphones
•
AC adapter
•
microUSB cable
•
Purchase a specified charger (sold separately).
◎
The battery is built into the product.
◎
Illustrations of cell phones in this manual are only for reference.
They may look different from the actual product.
Operating Instructions
"Instruction Manual Application" (Japanese/
English Version)
You can use the Basic Manual application on the product to check
operation procedures (available approximately one month after the
product is released).
After switching the display language to English (
▶
P. 13), home screen
→
[
開く
] in "
サポート／安心・安全
"
→
[Basic Manual].
•
If this is your first use, download and install the application by
following on-screen instructions.
When Using the Product
Before using the product, be sure to read the "Safety Precautions" for
proper use.
Before you assume that the product is malfunctioning, check for
possible remedies in au Customer Support on the au website:
http://www.au.kddi.com/english/support/
•
Communication is not possible in places where the signal does not
reach (e.g. tunnels and basements), even within the service area. In
addition, communication may not be possible in poor reception
areas. Communication may be interrupted if you move into a poor
reception area during communications.
•
Since this product uses radio waves, the possibility of communication
intercepts by third parties cannot be eliminated. (Yet the LTE/WiMAX
2+/GSM/UMTS system has highly secure confidential communication
features.)
•
au's VoLTE (LTE network) is used when connecting to emergency
services within Japan. You cannot connect using 3G (circuit-switched
network).
•
The product is compatible with the international roaming service.
Each network service varies depending on the area and service
content.
For details, refer to the au website.
•
Since the product is a radio station under the Radio Law, you may be
asked to temporarily submit the product for inspection in accordance
with the Radio Law.
•
The IMEI information of your cell phone is automatically sent to KDDI
CORPORATION for maintenance and monitoring operational status
of your cell phone.
•
When using the product overseas, check the relevant laws and
regulations of the country/region you visit.
•
The Company is not liable for any damages arising from earthquakes,
lightning, storms, floods or other natural disasters, or from fires,
actions by third parties, other accidents, your actions, negligence,
misuse, or use under other unusual conditions outside the
responsibility of the Company.
•
The Company is not liable for any incidental damages (change/
disappearance of saved content, loss of business profits, disruption
of business, etc.) arising from use of or inability to use the product.
It is recommended that you keep a copy of important phone
numbers, etc.
•
The Company is not liable for any damages arising from failure to
observe the contents of this manual.
•
The Company is not liable for any damages arising from malfunction
or other problems caused by any combination of connected devices
or software not related to the Company.
•
Captured image data or downloaded data may be altered or lost due
to malfunctions, repairs, or mishandling of the product. The Company
is not liable for any damages or lost profits resulting from recovery of
these data.
•
It is recommended that you keep a copy of important data on your
PC's hard disk, etc. Whatever the cause of the defect or malfunction
may be, the Company assumes no responsibility for alteration or loss
of saved data.
•
Contents such as contacts, mails, and bookmarks saved on the
product may be altered or lost due to accidents, malfunctions,
repairs, or mishandling. Be sure to keep a copy of important
contents. Note that the Company is not liable for any damages or
lost profits resulting from altered or lost contents.
•
Note that content data (whether paid or free) saved on the product
cannot be retained when the product is replaced for repair or other
reasons.
•
The product uses liquid crystal for its display. The display response
speed may become slow when the ambient temperature is low. This
is due to the property of liquid crystal and not a malfunction. The
display response speed will return to normal at room temperature.
•
Although the display used on the product employs high-precision
technology, some pixels (dots) may remain on/off. This is not a
malfunction.
•
It is recommended that you store separate copies of data such as
still pictures/videos you took and music on your PC by sending them
as mail attachments, etc. Note, however, that you may not be able to
make copies of some copyrighted data even by the above-mentioned
means.
•
Do not dispose of the product with regular trash. Please cooperate in
the collection of the product and optional accessories when they are
no longer needed, to protect the environment and effectively use
resources. Old products are collected at au shops and other places.
* "The Company" as appears in this manual refers to the following companies:
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE
COMPANY
Manufactured by: SHARP CORPORATION
◎
Reproduction of the contents of this manual in part or in whole is
prohibited.
◎
The contents of this manual are subject to change without notice.
◎
Every effort has been made in the preparation of this manual.
Should you notice any unclear points, omissions, etc., feel free to
contact us.
Cell Phone Etiquette
Use of Cell Phones is Not Allowed in the
Following Places!
•
Do not listen to music or watch videos/TV while driving a car or riding
a motorbike or bicycle. Use of a cell phone while driving a car or
riding a motorbike is prohibited by law. (Use of a cell phone while
riding a bicycle may be punishable by some regulations.) Be attentive
to traffic around you while walking. Not being able to hear
surroundings or looking only at the screen may cause a traffic
accident. Be especially careful at railroad crossings, on station
platforms, and at crosswalks.
•
Use of cell phones on airplanes is restricted. Follow the instructions
of each airline.
Be Considerate of People Around You
•
Do not make calls in theaters, museums, libraries, and other similar
places. Turn power off or turn on manner mode so as not to disturb
others around you with your ringtones.
•
Do not use the cell phone in places where you might hinder other
pedestrians.
•
Viewing a cell phone screen while walking is a serious hazard. Do not
talk on/operate the cell phone while walking or suddenly stop walking
to do so.
•
Move to areas where you will not inconvenience others on bullet
trains, in hotel lobbies, etc.
•
Refrain from talking on the cell phone in a loud voice.
•
Check whether sound from earphones, etc. is audible only to yourself
when there are other people around you on a train or in other closed
spaces.
•
Obtain the permission of other people before you take their photos
with the cell phone's camera.
•
When using the camera, follow common rules of etiquette regarding
camera use.
•
Some people near you in crowded places such as packed trains may
be using a cardiac pacemaker. Turn on "Airplane mode" or turn the
cell phone off in such places.
•
When a medical institution has laid down designated areas where cell
phones are not allowed to be used or brought in, abide by the rules.
ii
Preface ....................................................................................i
List of Packaged Items ............................................................i
Operating Instructions .............................................................i
When Using the Product .........................................................i
Cell Phone Etiquette ................................................................i
Contents .................................................................................ii
Safety Precautions .................................................... 1
Illustrations and Descriptions in This Manual ........................ 1
Safety Precautions (Observe Strictly) .................................... 1
Handling Precautions ............................................................ 5
Available Security Codes ...................................................... 6
Security Codes ............................................................................. 6
PIN ................................................................................................ 6
Notes on Waterproof and Dustproof Properties .................... 7
Notes on Using Bluetooth
®
/Wireless LAN (Wi-Fi
®
) Functions .. 9
Precautions for Bluetooth® ........................................................... 9
Precautions for Wireless LAN (Wi-Fi®) .......................................... 9
Frequency Band ........................................................................... 9
Notes on Voluntary Control of Radio Interference ................. 9
Notes on Packet Communication Fee .................................. 9
Notes on Applications ........................................................... 9
Getting Ready ......................................................... 10
Names and Functions of Parts ............................................ 10
Using the au Nano IC Card 04 ............................................ 11
au Nano IC Card 04 .................................................................... 11
Inserting the au Nano IC Card 04 ............................................... 11
Removing the au Nano IC Card 04 ............................................. 11
Using a microSD Memory Card .......................................... 11
Inserting a microSD Memory Card ............................................. 11
Removing the microSD Memory Card ........................................ 12
Unmounting the microSD Memory Card .................................... 12
Charging .............................................................................. 12
Notes on Charging ...................................................................... 12
Charging with the Desktop Holder (SHV36PUA) and
Specified AC Adapter (Sold Separately) ..................................... 12
Charging with the Specified AC Adapter (Sold Separately) ....... 13
Charging with a PC ..................................................................... 13
Turning the Power On/Off .................................................... 13
Switching the Display Language to English ........................ 13
Turning the Display On/Off .................................................. 13
Lock Screen ........................................................................ 14
Making Initial Settings ......................................................... 14
Setting Up Language and Wi-Fi® ............................................... 14
Setting Up a Google Account ..................................................... 14
Calibrating Touch Panel .............................................................. 14
au Easy Setting ........................................................................... 14
Setting Permissions for Applications .................................. 14
Transferring Data ................................................................. 15
Restoring Data via the au Settings Menu ................................... 15
Saving Data via the au Settings Menu ........................................ 15
Basic Operations .................................................... 15
Using Touch Panel ............................................................... 15
Using Touch Keys ................................................................ 15
Using the Home Screen ...................................................... 16
Home Screen Layout .................................................................. 16
Using the Status Bar ........................................................... 16
Icons ........................................................................................... 16
Using the Notification/Status Panel ............................................ 16
Setting the Manner Mode .................................................... 17
Setting Airplane Mode ......................................................... 17
Registering Frequently Used Contacts to Quick Buttons ... 17
Registering Contacts to Quick Buttons ...................................... 17
Character Entry ....................................................... 17
Switching Software Keyboards ........................................... 17
Character Entry Screen Layout ........................................... 17
Character Entry Basics ........................................................ 18
Entering Characters .................................................................... 18
Entering Pictograms, Symbols, or Emoticons ............................ 18
Entering Characters Using Voice Input ....................................... 18
Using Call Functions ............................................... 18
Making Calls ........................................................................ 18
Making a Call by Entering a Phone Number ............................... 18
Making a Call Using Call History ................................................ 18
Making a Call Using Address Book ............................................ 18
Making a Call Using a Quick Button ........................................... 18
Receiving Calls .................................................................... 18
Answering a Call ......................................................................... 18
Answering a Call Using Answering Memo .................................. 18
Playing Back Answering Memos ................................................ 18
Checking Your Own Phone Number ................................... 18
Saving Contacts to Address Book ...................................... 18
Using E-mail ............................................................ 19
Making Initial Settings for E-mail ......................................... 19
Changing E-mail Address .................................................... 19
Sending E-mails .................................................................. 19
Receiving E-mails ................................................................ 19
Using Camera ......................................................... 19
Shooting Still Pictures ......................................................... 19
Recording Videos ................................................................ 19
Appendix ................................................................. 19
Introduction of Peripheral Devices ...................................... 19
Troubleshooting ................................................................... 20
Updating Software .............................................................. 20
After-Sales Service .............................................................. 20
SIM-Unlocking the Product ................................................. 22
Main Specifications ............................................................. 22
Specific Absorption Rate (SAR) of Cell Phones .................. 22
CE Declaration of Conformity .............................................. 23
FCC Notice .......................................................................... 23
Export Administration Regulations ...................................... 23
Intellectual Property Rights ................................................. 24
Contents
1
Safety Precautions
Illustrations and Descriptions in This
Manual
Note on Key Illustrations
In this manual, key illustrations are simplified as shown below.
d(−)
u(＋)
s(Shutter)
f(p)
mch
Description of Navigation and Key Operation
In this manual, operation procedures are described as follows.
Description Meaning
Home screen
→
[Notepad] under "
便利な
ツール
"
→
Select a
memo
Slide/flick the home screen, and then tap
"Notepad" under "
便利なツール
." Then
tap the memo you want to open.
f
(
p
) (press and hold
for at least 2 seconds)
Press and hold
f
(
p
) for at least 2
seconds.
* Tapping is to select a key or icon displayed on the screen by lightly tapping
it with your finger.
Notes on Illustrations and Screenshots
Screenshots and operations in this manual are based on the product
with an au Nano IC Card 04 installed.
Screenshots may look different from the actual screen. Portions of the
screen may be omitted.
Actual screen In this manual
In this manual, portions of the screen
such as indicators are omitted.
◎
In this manual, screenshots for body color "Gold" are provided as
examples.
◎
Descriptions in this manual are based on operations in portrait
orientation. In landscape orientation, menu items, icons, keys and
other user interface items may be different.
◎
Descriptions in this manual are based on operations for
メインホー
ム
(default home application). Operations may be different
depending on the home application. Installed home applications
are accessible from "Home applications."
◎
Menu items, layers and icons described in this manual may be
different depending on functions being used and conditions.
◎
In this manual, "microSD™ memory card (commercially available),"
"microSDHC™ memory card (commercially available)" and
"microSDXC™ memory card (commercially available)" are referred
to as "microSD memory card" or "microSD."
◎
The fees described in this manual exclude tax unless otherwise
noted.
Safety Precautions (Observe Strictly)
Before using the product, thoroughly read these safety
precautions for proper use. After reading, print and
keep the precautions in a safe place.
Be sure to observe the instructions described in these
precautions to prevent injury self or others, or damage
to property.
These labels show degree of risk from improper use.
DANGER
Indicates imminent risk of death or
serious injury*1 from improper
handling.
WARNING
Indicates risk of death or serious
injury*1 from improper handling.
CAUTION
Indicates risk of minor injury*2 and
property damage*3 from improper
handling.
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-
temperature), electric shock, broken bones, injuries with residual aftereffects
from poisoning, etc., and injuries requiring hospital admission for treatment
or long-term hospital attendance as an outpatient.
*2 Minor injury: This refers to injuries, burns (high- and low-temperature),
electric shock, etc. that do not require hospital admission for treatment or
long-term hospital attendance as an outpatient.
*3 Property damage: This refers to extended damage to buildings, furniture,
livestock or pets.
Symbols Signifying Prohibited/Compulsory
Actions
Prohibited
Indicates an action
that is not allowed.
Wet hands
prohibited
Indicates that
handling with wet
hands is not allowed.
Disassembly
prohibited
Indicates that
disassembly is not
allowed.
Instruction
Indicates an action
that must be done.
Wetting
with water
prohibited
Indicates that use in a
place where the
product is likely to get
wet is not allowed.
Disconnect
plug from
power outlet
Indicates that the
power plug must be
unplugged from the
outlet.
Precautions Common to the Main Unit, Charger,
au Nano IC Card 04, Peripheral Devices
DANGER
Prohibited
Do not use, store or leave in hot places or where heat
collects (e.g. by the fire, near a heater, under a kotatsu,
in direct sunlight, inside a vehicle in the hot sun).
Doing so might cause fire, burns, injury, electric shock, etc.
Prohibited
Do not put in a cooking apparatus such as microwave
oven or induction stove or in a pressure vessel such as
pressure cooker; do not place near such devices.
Doing so might cause fire, burns, injury, electric shock, etc.
Prohibited
Do not subject to or place directly on sand, soil, or mud.
Do not touch with dirty hands.
Doing so might cause fire, burns, injury, electric shock, etc.
For waterproof and dustproof properties, refer to the
following.
"Notes on Waterproof and Dustproof Properties" (
▶
P. 7)
Prohibited
Do not charge the battery while the main unit or any of
its related products is wet with water or other liquids
(drinking water, sweat, seawater, pet urine, etc.).
Doing so might cause fire, burns, injury, electric shock, etc.
For waterproof property, refer to the following.
"Notes on Waterproof and Dustproof Properties" (
▶
P. 7)
Disassembly
prohibited
Do not disassemble or modify.
Doing so might cause fire, burns, injury, electric shock, etc.
Wetting
with water
prohibited
Do not wet with water or other liquids (drinking water,
sweat, seawater, pet urine, etc.).
Doing so might cause fire, burns, injury, electric shock, etc.
For waterproof property, refer to the following.
"Notes on Waterproof and Dustproof Properties" (
▶
P. 7)
2
Wetting
with water
prohibited
Do not let water or other liquids (drinking water, sweat,
seawater, pet urine, etc.) enter the charging terminals or
external connection jack.
Doing so might cause fire, burns, injury, electric shock, etc.
For waterproof property, refer to the following.
"Notes on Waterproof and Dustproof Properties" (
▶
P. 7)
Instruction
Use optional accessories specified by au.
Failure to do so might cause fire, burns, injury, electric
shock, etc.
WARNING
Prohibited
Do not drop, stomp, throw or subject to excessive force
or strong impact/vibration.
Doing so might cause fire, burns, injury, electric shock, etc.
Prohibited
Do not let conductive materials (metal strip, pencil lead,
etc.) come into contact with the charging terminals or
external connection jack. Do not let dust enter them.
Doing so might cause fire, burns, injury, electric shock, etc.
Prohibited
Do not cover or wrap with bedding, etc. while using or
charging.
Doing so might cause fire, burns, etc.
Instruction
If charging is not completed after the specified charging
time, stop charging.
Failure to do so might cause fire, burns, injury, etc. due to
overcharge or for other reasons.
Instruction
Before entering an area with a risk of flammable gas
generation such as a gas station or where dust is
generated, be sure to turn off the product and stop
charging.
Failure to do so might cause explosion, fire, etc.
Instruction
If there is abnormal odor/noise, smoke, overheating,
discoloration, deformation, or other abnormalities, follow
these steps.
•
Unplug from the outlet.
•
Turn off the product.
Failure to follow the above steps might cause fire, burns,
injury, electric shock, etc.
CAUTION
Prohibited
Do not use if broken.
Doing so might cause fire, burns, injury, etc.
Prohibited
Do not place on a wobbly table, sloped surface, or other
unstable location. Be especially careful when the product
is set to vibrate.
Doing so might allow the product or its related products to
fall and cause injury, etc.
Prohibited
Do not use or store in places subject to excessive dust,
high humidity, or high temperatures.
Doing so might cause fire, burns, electric shock, etc.
For waterproof and dustproof properties, refer to the
following.
"Notes on Waterproof and Dustproof Properties" (
▶
P. 7)
Prohibited
For use by a child, explain instructions and supervise
use.
Failure to do so might cause injury, etc.
Prohibited
Do not leave within the reach of small children.
May cause accidental swallowing, injury, electric shock,
etc.
Instruction
The product may become hot if used continuously for an
extended period or while charging. Be careful of
prolonged contact even by accident such as falling
asleep.
The product or specified charger (sold separately) may
become hot after prolonged use of applications, call
functions, data communication, TV/video viewing functions,
etc. or while charging. Prolonged direct contact with hot
parts might cause skin irritation, itchiness, rashes, low-
temperature burns, etc. depending on your physical
condition.
Main Unit
DANGER
Prohibited
Do not throw into a fire or apply heat.
The battery may ignite, burst, overheat, or leak, causing
fire, burns, injury, etc.
Prohibited
Do not apply excessive force; do not puncture with a nail
or other sharp-pointed object, hit with a hammer or other
hard object, or stomp.
The battery may ignite, burst, overheat, or leak, causing
fire, burns, injury, etc.
Instruction
If substances in the internal battery get in eyes, do not
rub; rinse with clean water and consult a doctor
immediately.
Eye contact with substances in the internal battery might
cause loss of sight or other physical harm.
Instruction
If substances in the display get in eyes or mouth, do not
rub; rinse with clean water and consult a doctor
immediately.
Substances in the display might cause loss of sight or
other physical harm.
WARNING
Prohibited
Do not point the infrared port at eyes when sending data
via infrared.
Doing so might adversely affect eyes or cause other
problems.
Prohibited
Do not point the infrared port at infrared devices when
using infrared communication.
Doing so might cause the infrared devices to malfunction,
leading to an accident or other problems.
Prohibited
Do not shine Mobile Light close to eyes. Maintain a safe
distance, especially from small children.
Doing so might cause visual impairment or other problems;
might temporarily affect eyesight or startle, leading to injury
or other accident.
Prohibited
Do not point the mobile light at drivers.
Doing so might hinder driving performance, leading to an
accident.
Prohibited
Do not view the screen for a long period when it is
flickering.
Doing so might cause spasms, loss of consciousness, etc.
Prohibited
Do not let water or other liquids (drinking water, sweat,
seawater, pet urine, etc.) or a foreign object (metal strip,
flammable material, etc.) enter the au Nano IC Card 04
tray slot or microSD memory card slot.
In addition, insert the au Nano IC Card 04 tray and a
microSD memory card into correct openings in correct
orientation.
Doing so might cause fire, burns, injury, electric shock, etc.
Prohibited
Do not expose the camera lens to direct sunlight for an
extended period.
Doing so might cause fire, burns, injury, etc. due to the
light-collecting mechanism of the lens.
Instruction
Turn off the product or set it to Airplane mode before
boarding an airplane.
Since use of the product on airplanes is restricted, follow
the instructions given by the respective airlines.
Failure to do so might adversely affect an airplane
’
s
electronic device.
If you engage in a prohibited activity while using the
product on an airplane, you might be punished by law.
Instruction
Regarding the use of the product in a hospital, follow the
instructions given by the respective medical institution.
Turn off the product in areas where the use of cell
phones is prohibited.
Failure to do so might adversely affect the operation of
electronic devices and electronic medical devices.
Instruction
When you are on a handsfree call, while the ringtone is
playing, when in standby, etc., be sure to keep the
product at a safe distance from your ears.
When you attach an earphone/microphone to the
product and play games, videos, or music, adjust the
volume to a comfortable level beforehand.
Setting the volume too high or using an earphone/
microphone continuously for a long period might impair
hearing.
In addition, not being able to hear surroundings might
cause an accident.
Instruction
If you have a weak heart, be careful when setting the
incoming vibration and ringtone volume.
Failure to do so might adversely affect your heart.
3
Instruction
If you are using an electronic medical device, check with
its manufacturer or vendor on radio wave effects before
using the product.
Failure to do so might adversely affect the operation of the
electronic medical device.
Instruction
Turn off the product near electronic devices that employ
high precision control systems or weak signals.
Failure to do so might cause the electronic devices to
malfunction or might adversely affect the operation.
Take added care near these devices: Hearing aids,
implanted pacemakers, implanted cardioverter-defibrillators
and other electronic medical devices; other automatic
control devices. If you are using an electronic medical
device such as an implanted pacemaker or implanted
cardioverter-defibrillator, check with its manufacturer or
vendor on radio wave effects.
Instruction
If the display or camera lens breaks, be careful with
shards of broken glass and exposed parts of the
product.
Touching the broken or exposed parts might cause burns,
injury, electric shock, etc.
Instruction
If the internal battery leaks or there is abnormal odor,
discontinue use immediately and keep sources of flame
away.
Leaked fluid may catch fire, causing the battery to ignite,
burst, etc.
Instruction
Do not let your pet bite the product.
Doing so might cause the internal battery to ignite, burst,
overheat, or leak, leading to fire, burns, injury, etc.
CAUTION
Prohibited
Do not swing the product holding the strap, etc.
Doing so might result in hitting yourself, other persons, or
nearby objects, causing injury or other accident.
Prohibited
When using the motion sensor and electromagnetic
sensor, make sure of the safety around you and hold the
product firmly; do not swing with excessive force.
Failure to do so might cause injury or other accident.
Prohibited
If the display breaks and internal substances leak, do not
let them come into contact with skin (face, hands, etc.)
or clothes.
Doing so might cause loss of sight, skin damage, etc.
If internal substances get in eyes or mouth or if they come
into contact with skin or clothes, rinse with clean water
immediately.
In case of contact with eyes or mouth, consult a doctor
immediately after rinsing.
Prohibited
Do not dispose of the product with regular trash.
Doing so might cause fire, burns, injury, etc. due to ignition;
might adversely affect the environment. When the product
is no longer needed, take it to an au shop, or follow the
local regulations regarding collection of the product.
Prohibited
If substances in the internal battery leak, do not let them
come into contact with skin (face, hands, etc.) or clothes.
Doing so might cause loss of sight, skin damage, etc.
If internal substances get in eyes or mouth or if they come
into contact with skin or clothes, rinse with clean water
immediately.
In case of contact with eyes or mouth, consult a doctor
immediately after rinsing.
Instruction
Before using the product in a vehicle, check with the
manufacturer or dealer of the vehicle on radio wave
effects.
In rare cases, use of the product might adversely affect
operation of on-vehicle electronic devices, depending on
the type of vehicle. If this occurs, discontinue use
immediately.
Instruction
If you feel any skin abnormalities associated with use of
the product, discontinue use and consult a doctor
immediately. Use of the product might cause itchiness,
skin irritation, rashes, etc. depending on your physical
condition.
For the materials used for parts of the product, refer to
"Materials" (
▶
P. 4).
Instruction
When opening/closing the camera slide cover, take care
not to get your finger or any other part of your body
caught.
Failure to do so might cause injury, etc.
Instruction
The earpiece (receiver)/speaker and the camera slide
cover have magnetic parts; make sure that no metal strip
(a craft knife blade, staple, etc.) is adhered.
Metal strip on the product might cause injury, etc.
Instruction
See the display in a sufficiently bright place at a
reasonable distance.
Seeing in a dark place or at a close distance might
deteriorate vision or cause other problems.
Charger
WARNING
Prohibited
Do not use the specified charger (sold separately) if the
cord is damaged.
Doing so might cause fire, burns, electric shock, etc.
Prohibited
Do not use the specified charger (sold separately) or
desktop holder (SHV36PUA) in humid places such as a
bathroom.
Doing so might cause fire, burns, electric shock, etc.
Prohibited
If you hear thunder, do not touch the specified charger
(sold separately).
Doing so might cause electric shock, etc.
Prohibited
Do not short-circuit the charging terminals when the
charger is plugged into the outlet. In addition, do not let
your hand, finger or any other part of your body come
into contact with the charging terminals.
Doing so might cause fire, burns, electric shock, etc.
Prohibited
Do not place a heavy object on the cord of the specified
charger (sold separately); do not apply excessive force
by pulling, etc.
Doing so might cause fire, burns, electric shock, etc.
Prohibited
When plugging/unplugging the specified charger (sold
separately) into/from the outlet, keep metal objects such
as a metal strap away.
Failure to do so might cause fire, burns, electric shock, etc.
Prohibited
Do not use the specified charger (sold separately) with a
voltage converter designed for overseas travel.
Doing so might cause ignition, overheating, electric shock,
etc.
Prohibited
When the specified charger (sold separately) is
connected to the product, do not apply excessive force
to the connection.
Doing so might cause fire, burns, injury, electric shock, etc.
Prohibited
Do not use the desktop holder (SHV36PUA) in a vehicle.
Doing so might allow the desktop holder to fall or might
hinder driving performance, leading to an accident. The
desktop holder (SHV36PUA) is designed for indoor use on
stable surfaces.
Wet hands
prohibited
Do not touch the cord, charging terminals or power plug
of the specified charger (sold separately), or the desktop
holder (SHV36PUA) with wet hands.
Doing so might cause fire, burns, electric shock, etc.
Instruction
Use at the specified power supply voltage.
When charging the battery overseas, use the specified
charger (sold separately) designed for overseas use.
Use at other power supply voltages might cause fire,
burns, electric shock, etc.
AC adapter: 100 V AC (connect to a household AC outlet
only)
AC adapter designed for overseas use: 100 V AC to 240 V
AC (connect to a household AC outlet only)
Instruction
Wipe off dust on the power plug.
Using the charger when dust is on plug might cause fire,
burns, electric shock, etc.
Instruction
Plug the specified charger (sold separately) into the
outlet firmly.
Failure to do so might cause fire, burns, electric shock, etc.
Instruction
When unplugging the power plug of the specified
charger (sold separately) from the outlet, hold the
charger body and pull, without forcefully pulling the cord.
Pulling the cord of the specified charger (sold separately)
may damage the cord, causing fire, burns, electric shock,
etc.
Instruction
When inserting/removing the specified charger (sold
separately) into/from the product, insert/remove it
straight into/from the jack, without forcefully pulling cord.
Inserting/removing in an incorrect orientation might cause
fire, burns, injury, electric shock, etc.
Instruction
If the charging terminals become bent or deformed,
discontinue use immediately. In addition, avoid using the
charger by restoring the terminals to their original state.
Failure to do so might cause fire, burns, injury, electric
shock, etc. due to short-circuiting of the charging
terminals.
4
Disconnect
plug from
power outlet
Unplug the power plug of the specified charger (sold
separately) from the outlet when not in use.
Leaving the power plug plugged in might cause fire, burns,
injury, electric shock, etc.
Disconnect
plug from
power outlet
If water or other liquids (drinking water, sweat, seawater,
pet urine, etc.) enter, unplug the power plug from the
outlet immediately.
Failure to do so might cause fire, burns, electric shock, etc.
Disconnect
plug from
power outlet
Before cleaning, unplug the power plug from the outlet.
Cleaning without unplugging the power plug might cause
fire, burns, electric shock, etc.
CAUTION
Prohibited
Do not touch the specified charger (sold separately) for a
long period when it is plugged into the outlet.
Doing so might cause burns, etc.
Instruction
If you feel any skin abnormalities associated with use of
the specified charger (sold separately) or desktop holder
(SHV36PUA), discontinue use and consult a doctor
immediately. Use of the product might cause itchiness,
skin irritation, rashes, etc. depending on your physical
condition.
For the materials used for the desktop holder (SHV36PUA),
refer to "Materials" (
▶
P. 4).
au Nano IC Card 04
CAUTION
Instruction
When handling the au Nano IC Card 04, be careful with
cut edges so as not to damage your finger or any other
part of your body.
Failure to do so might cause injury, etc.
Instruction
Be careful when inserting/removing the au Nano IC Card
04.
Failure to do so might injure your hand or finger.
Use near Medical Devices and Inside Medical
Facilities
WARNING
Instruction
If you are using an electronic medical device such as an
implanted pacemaker or implanted cardioverter-
defibrillator, carry or use the product at least 15 cm away
from where the device is.
Radio waves might adversely affect the operation of the
electronic medical device.
Instruction
Before using an electronic medical device other than an
implanted pacemaker or implanted cardioverter-
defibrillator outside a medical institution (for home
treatment, etc.), check with its manufacturer on radio
wave effects.
Radio waves might adversely affect the operation of the
electronic medical device.
Instruction
In a situation where you may not be able to maintain a
distance of at least 15 cm from other persons, such as
when your movement is restricted, disable radio wave
emission by setting Airplane mode, turning off the
product, etc.
There may be persons with an electronic medical device
such as an implanted pacemaker or implanted
cardioverter-defibrillator nearby. Radio waves may
adversely affect the operation of the electronic medical
device.
Instruction
Regarding the use of the product in a medical institution,
follow the instructions given by the medical institution.
Failure to do so might adversely affect the operation of
electronic medical devices.
Materials
Main Unit (SHV36)
Part Materials Surface
treatment
Display surface Reinforced glass AF coating
Back
PC + ABS (GF20%)
Acrylic UV cured
coating
Outer casing PA resin + GF45% Acrylic UV cured
coating
Power key PC Acrylic UV cured
coating
Volume up/down key PC Acrylic UV cured
coating
Shutter key Aluminum Anodizing
Phone key, Home key, Mail
key
PC + PMMA Hard coating
Periphery of Phone key,
Home key, Mail key
PC + PMMA Hard coating
Camera slide cover PC + ABS Acrylic UV cured
coating
Camera panel Reinforced glass AR coating + AF
coating
Camera fringe Aluminum Anodizing
Mobile light lens PC None
Screen for earpiece (receiver)/
speaker
Polyester None
External connection jack
(resin portion)
PA resin None
External connection jack
(metal portion)
SUS + copper
alloy
Tin plating, gold
plating
Charging terminals SUS Gold plating
Strap pin SUS None
au Nano IC Card 04/microSD
memory card cover
PC resin Acrylic UV cured
coating
Hinge of au Nano IC Card 04/
microSD memory card cover
Elastomer resin None
Seal on au Nano IC Card 04/
microSD memory card cover
EPDM None
au Nano IC Card 04 tray slot SUS None
microSD memory card slot SUS Nickel plating
au Nano IC Card 04 tray POM resin None
IMEI tray PET resin None
Camera fringe sheet Acrylic resin + PET
resin
Hard coating
Desktop Holder (SHV36PUA)
Part Materials Surface
treatment
Outer casing (top/bottom) ABS resin Emboss
processing
Lock lever POM resin None
Contact lever POM resin None
Charging terminals (positive
and negative pins)
Phosphor bronze Gold plating
External connection jack
(resin portion)
SUS None
External connection jack
(metal portion)
SUS None
Rubber foot Urethane foam None
Screw Carbon steel for
cold heading
Trivalent
chromate
Rating plate Polyester film Lamination
Instruction label Polyester film Lamination
5
Handling Precautions
These precautions are provided to prevent product faults and to
ensure that performance can be fully demonstrated.
Thoroughly read these precautions for proper use.
Precautions Common to the Main Unit, Internal Battery,
Charger, au Nano IC Card 04, Peripheral Devices
●
Do not apply excessive force to the product during use. Be sure not
to put the product into a tightly packed bag or place a heavy object
on the product in a bag. Sitting on the product in a pocket might
damage the main unit, display or internal circuit board resulting in a
malfunction.
Keeping an external device connected to the external connection
jack might damage the connector resulting in a malfunction. Such
damage and malfunction are not covered by the warranty, even if
there is no external damage.
●
To ensure waterproof and dustproof properties (equivalent to IPX5,
IPX8 and IP5X) of the product, use the product with the au Nano IC
Card 04/microSD memory card cover securely closed.
Note that the waterproof and dustproof properties are not
guaranteed in all circumstances. Do not let foreign objects such as
liquid or dust enter the product or attach foreign objects such as
liquid or dust to the charger or optional accessories. Do not open/
close the au Nano IC Card 04/microSD memory card cover in the
rain or with water drops on the surface of the product. Doing so
might cause water ingress resulting in internal corrosion.
Malfunctions determined to be caused by water seepage are not
covered by the warranty.
●
Do not use the product in extremely hot, cold or humid places. (Use
within an ambient temperature range of 5
°
C to 35
°
C and humidity
range of 35% to 85%.)
•
SHV36
•
au Nano IC Card 04 (inserted into the SHV36)
•
Charger
•
Peripheral devices
●
Do not use in places subject to excessive dust or vibration. Doing
so might cause a fault.
●
Clean the product with a soft dry cloth (such as the type used for
eyeglasses). Forceful rubbing with a dry cloth may scratch the
display. The display may be stained if splash or smear is left
attached to the surface.
Wiping the product using alcohol, thinner, benzine, detergent, glass
cleaner, etc. might erase the printing on the outer casing or cause a
fault.
●
Use as far away as possible from landline phones, TVs and radios.
Use nearby might affect them.
●
The product may become warm while charging or during operations.
This is normal.
●
Do not place near corrosive chemicals or in places where corrosive
gas is generated. Doing so might cause a fault.
●
Do not use outside when you hear thunder. There is a risk of
lightning strikes and electric shock.
●
Be sure to use only the specified peripheral devices. Use of other
peripheral devices might cause a fault.
●
Do not put the product in a cooking apparatus such as microwave
oven or a pressure vessel. Doing so might cause a fault.
●
The customer is not allowed to disassemble, modify or repair the
product. Doing so might cause a fault.
In addition, modification of the product is in violation of the Radio
Law and/or the Telecommunications Business Law.
●
To prevent short-circuiting of the external connection jack and
earphone/microphone jack, do not let your finger or any other part
of your body or conductive materials (metal strip, pencil lead, etc.)
come into contact with or enter these areas. Doing so might cause
a fault.
●
If the product gets wet while charging, unplug the power plug of the
specified charger (sold separately) immediately.
●
Do not use the product while driving a car or riding a motorbike or
bicycle or while walking. Use of a cell phone while driving a car or
riding a motorbike is prohibited by law. Use of a cell phone while
riding a bicycle may be punishable by some regulations.
●
Do not use or charge the product when it is in a bag or covered with
bedding, etc. Doing so might cause a fault.
●
When using a charger or external device, insert/remove the
connector straight into/from the jack. Inserting/removing in an
incorrect orientation might cause a fault.
●
Do not expose the camera lens to direct sunlight for an extended
period. Doing so might cause a fault.
●
Do not use, store or leave the product in places subject to direct
sunlight (e.g. inside a vehicle), in hot places, in extremely cold
places, or in humid or dusty places. Doing so might cause a fault.
●
Do not place the product on a wobbly table, sloped surface, or
other unstable location. Be especially careful while charging or when
the product is set to vibrate. Doing so might allow the product to fall
and cause a fault, etc.
●
When charging the product, do not exceed the rating given for the
outlet or wiring (for example, by connecting multiple devices to a
single power strip).
●
When the product becomes warm during use, the screen brightness
or some of its functions may be restricted.
Main Unit
●
The battery is built into the product and it is not user replaceable.
For replacing the battery, contact an au shop or Customer Service
Center.
●
Do not forcefully press, tap or intentionally subject the display to
strong impact. Doing so might cause scratching or damage.
●
Do not forcefully press sharp objects or hard objects against keys or
display surface. Doing so might cause scratching or damage.
●
The touch panel is designed to be lightly touched by fingers. Do not
apply strong pressure with your fingers or sharp-pointed objects
(such as ballpoint pens and pins) on the touch panel.
The touch panel may not respond or may malfunction in the
following cases.
•
Operation with gloved hands
•
Operation with fingernails
•
Operation when a foreign object is on the touch panel
•
Operation with a protective film or sticker on the touch panel
•
Operation with a water drop left or condensation formed on the
display
•
Operation with wet or sweaty fingers
•
Operation under water
●
Never use the product if it is modified. Use of a modified device
violates the Radio Law and/or the Telecommunications Business
Law.
To view the unique authentication and standard marks (including
certification/authentication numbers) for the product, perform the
following operations.
Home screen
→
[
設定
] under "
ショートカット
"
→
[All settings menu]
→
[About phone]
→
[Authentication]
The product has acquired the certification of conformity with
technical regulations for the specified radio station based on the
Radio Law and certification of conformity with technical regulations
for the terminal based on the Telecommunications Business Law,
and the "Technical Conformity Mark " can be found in the product
as a certificate. View contents of electrical certificates in the product
for information on certification.
If any of the internal components of the product is modified, the
certification of conformity with technical regulations will become
invalid. Never use the product without the valid certification. Doing
so violates the Radio Law and/or the Telecommunications Business
Law.
●
Take care not to place magnetized items such as magnetic cards,
speakers and TV sets near the product, as it might cause
malfunction.
Placing strong magnetism close to the product might cause false
operation.
●
Do not bring the product close to magnetized objects such as cash
cards, credit cards, and prepaid cards. Doing so might result in loss
of saved data.
●
When putting the product in a pocket or bag, keep the display away
from metal objects and other hard objects to prevent scratches and
damage. If using a strap whose metal or other hard part may come
into contact with the display, be careful not to scratch or damage
the display with it.
●
When suddenly brought into a warm place from a cold place, or
when in a humid location, or when used where temperature
suddenly changes (e.g. near the air discharge port of an air
conditioner), water drops (i.e. condensation) sometimes are formed
inside the product. Note that when used under conditions such as
this, humidity might cause corrosion or a fault.
●
Do not forcibly insert or remove a microSD memory card. Doing so
might injure your hand or finger.
●
While writing/reading data to/from a microSD memory card, do not
subject the product to vibration or impact or turn off the power.
Doing so might cause loss of data or a fault.
●
Do not cover the light sensor with your finger or place a sticker, etc.
on it. Doing so may hinder the light sensor from detecting the
ambient light level and the sensor may not work correctly.
●
Do not place a sticker, etc. on the proximity sensor. Doing so may
cause the sensor to malfunction and the display may remain turned
off while making a call or during a call, making it impossible to
operate the product.
●
Covering the earpiece (receiver)/speaker, mouthpiece (microphone),
sub microphone, or air vent with a sticker, your finger, etc. may
hinder the performance of the product.
●
If you hold the product to talk with your hair covering your ear, the
proximity sensor may malfunction. This may cause the display to
remain on, allowing the call to be disrupted if the display is
accidentally touched.
●
If the display breaks, discontinue use immediately and contact an au
shop or Keitai Guarantee Service Center. Continued use may cause
injury.
●
Do not apply excessive force to the sliding part of the camera slide
cover. Doing so might cause a fault or damage. Handle the cover
carefully.
●
Placing a sticker, etc. on the display or a key may cause malfunction
or shorten the usage time. Doing so may also damage the product.
●
If you place magnetized objects, metal straps, etc. close to the
product, the speaker may emit sounds. This is not a fault.
●
Note that forcibly pulling or applying excessive force to the au Nano
IC Card 04/microSD memory card cover may damage it.
●
The display may be hard to see in bright places such as under the
direct sunlight. This is not a fault.
6
●
Normally, use the product with the au Nano IC Card 04/microSD
memory card cover closed. If the cover is open, dust or water may
get inside causing a fault.
●
Do not let liquids, metal objects or other foreign objects enter the au
Nano IC Card 04 tray slot or microSD memory card slot. Doing so
might cause a fault.
●
Do not drop, throw, stomp or subject to strong impact.
Doing so might cause a fault.
●
Do not place the product directly on sand at a beach, etc. Sand or
other small particles might enter the earpiece (receiver)/speaker,
mouthpiece (microphone) or earphone/microphone jack, causing
the volume to drop. Letting sand or other small particles enter the
product might cause overheating or a fault.
Touch Panel
●
Placing a sticker or sheet (e.g. a commercially available protective
film, peep prevention sheet) on the display might hinder correct
operation of the touch panel.
●
When carrying the product in a pocket or bag, take care not to put
the touch panel close to metals or other conductive materials; doing
so might cause the touch panel to malfunction.
Internal Battery
(The internal battery of the product is a lithium-ion battery.)
The internal battery is not fully charged at the time of purchase. Charge
it before using the product. In addition, charge the battery after a long
time of disuse before using the product.
●
Use of the product in very hot or cold environments, for example,
leaving it in a vehicle with the windows closed in summer, will
decrease the internal battery capacity and shorten the available
battery usage time. This will also shorten the internal battery's life.
Try to use the product at room temperature whenever possible.
●
The internal battery gradually discharges after charging even if the
product is not used. The internal battery may discharge completely
after a long period of disuse. It is recommended you charge it before
using the product.
●
The internal battery is a consumable item. If its performance does
not recover, for example, if the usable time is extremely short even
after charging, the internal battery is at the end of its life; discontinue
use. Since the battery is a built-in type, its replacement requires
submission of the product to an au shop, etc. for a paid repair. In
addition, you may not be able to use the product for a certain
period. Note that the internal battery's life varies depending on the
usage, etc.
●
To avoid decreasing the performance and life of the internal battery,
do not store the product in the following conditions:
•
The battery is fully charged (immediately after charging is
complete)
•
The battery has run out (too low to turn on the product)
•
In extremely hot or humid conditions
●
Depending on the usage, the internal battery may swell up near the
end of its life. This is due to the properties of lithium-ion batteries,
and does not affect safety.
Charger
●
Do not wrap the power cord of the specified charger (sold
separately) around the charger body. Do not forcibly bend the
charger's plug or the connection between the connector and power
cord. Do not place a heavy object on the cord of the charger (sold
separately); do not apply excessive force by pulling, etc.
Doing so might cause a fault.
●
When unplugging the power plug of the specified charger (sold
separately) from the outlet, hold the power plug. Pulling the cord
may damage the cord.
au Nano IC Card 04
●
Do not forcibly remove or insert the au Nano IC Card 04. Be careful
not to apply excessive force when inserting the card into your au cell
phone.
●
You are responsible for any damage caused by inserting the au
Nano IC Card 04 into other devices such as an IC card reader/
writer.
●
Do not place a sticker, etc. on the au Nano IC Card 04.
●
Do not subject the au Nano IC Card 04 to actions that can damage
it (using in hot places, throwing in a fire, letting a foreign object come
into contact with the metal contacts, subjecting to impact, bending
or pressing, wetting, etc.). Doing so might erase data or cause a
fault.
Camera
●
If the camera lens breaks, discontinue use immediately and contact
an au shop or Keitai Guarantee Service Center. Continued use may
cause injury.
●
Test the camera before shooting special moments.
●
Do not use the camera in places where shooting is prohibited.
Copyrights and Portrait Rights
●
If the data you shot or recorded using the product or the data you
downloaded from the Internet, etc. is in part or in whole protected
by the third party's copyright, you are not allowed to copy, distribute,
publicly send, or modify the data without the consent of the
copyright holder, except for personal use, under the copyright law.
In addition, do not use or modify portraits or names of other
individuals without their consent, as it may infringe on portrait rights.
Note that shooting and recording may be restricted at some live
performances, shows and exhibitions, even for personal use.
●
Be careful about copyrights and portrait rights when posting still
pictures you shot, etc. on websites.
Back Up Contents of the Product
●
Back up important contents of the product's memory. They may be
lost or altered due to unpredictable factors such as static electricity
and a fault, or by repair, mishandling, etc.
Available Security Codes
Security Codes
Various security codes are available on the product.
See below for the available security codes. Do not forget them as they
are necessary for various operations and contracts.
Be sure to change the default values to your own.
Security Code
Usage example
①
To use voicemail and call forwarding services
remotely from a landline phone
②
To use Customer Service Center or to make
inquiries, subscribe to services, or change your
subscription details on the au website
Default value A four-digit number you wrote in the application
form
Security Key
Usage example To set or cancel call blocking, etc.
Default value 1234
Be sure to change the default value to your own.
PIN Code
Usage example To prevent unauthorized use of the au Nano IC
Card 04 by third parties
Default value 1234
Be sure to change the default value to your own.
PIN
PIN Code
To prevent unauthorized use of the au Nano IC Card 04 by third
parties, set the product to require PIN code entry every time the power
is turned on. You also need to enter the PIN code when setting
whether PIN code entry is required.
The PIN code is locked after three consecutive failed entry attempts.
Unlock the PIN code using PUK code.
•
At the time of purchase, the PIN code is "1234," and PIN code entry
is not required. Change the PIN code to any four- to eight-digit
number and set the product to require PIN code entry if necessary.
If you set the product to require PIN code entry, be sure to change
the PIN code to your own.
PIN Unlock Key (PUK) Code
Use to unlock the PIN code.
•
PUK code is an eight-digit number given at the time of purchase. It is
printed on the back of the plastic card on which the au Nano IC Card
04 is attached.
•
After entering the PUK code, you need to set a new PIN code.
•
If you enter the wrong PUK code ten times consecutively, you will
need to contact an au shop, PiPit or Customer Service Center.
•
PIN code is not reset by initializing the product.
◎
If the PIN code gets locked, the product may restart for security
reasons.
7
Notes on Waterproof and Dustproof
Properties
Thoroughly read the precautions described in "Notes on Waterproof
and Dustproof Properties" for proper use. Failure to observe the
precautions may cause ingress of liquid or dust, resulting in
overheating, ignition, electric shock, injury or a fault.
Note that proper operations of the product are not guaranteed in all
circumstances. Faults determined, after an inspection, to be caused
by mishandling by the customer such as using the product without
observing the precautions described in "Notes on Waterproof and
Dustproof Properties" are not covered by the warranty.
Waterproof and Dustproof Properties of the
Product
The product has a protection rating (JIS C 0920) for waterproof
property equivalent to IPX5*1 and IPX8*2, as well as dustproof property
equivalent to IP5X*3 on the condition that the au Nano IC Card 04/
microSD memory card cover is securely closed (based on the
experiments by the Company).
*1 IPX5 means that the cell phone continues to function as a phone after
being subjected to a water jet (approximately 12.5 liters/min) discharged
from a water pouring nozzle (inner diameter: 6.3 mm), from all directions
and approximately 3 meters away from the cell phone for at least 3
minutes.
*2 IPX8 means that the cell phone continues to function as a phone after
being gently lowered into a tank filled with still tap water (at room
temperature) to the depth of 1.5 meter, immersed at the bottom for
approximately 30 minutes and then taken out of the tank.
*3 IP5X means that the cell phone continues to function as a phone and its
safety is maintained after being agitated in an apparatus with dust
(diameter: 75
μ
m or less) for 8 hours. (This does not guarantee complete
prevention of dust ingress.)
Examples of Waterproof and Dustproof Properties of
the Product
•
The product can be used at the poolside. However, do not wet it with
water other than tap water such as pool water or submerge it in pool
water.
•
The product can be washed with a low-pressure flow of tap water (up
to 6 liters/min) at room temperature (5
°
C to 35
°
C).
Handling the Product
•
Close the au Nano IC Card 04/microSD memory card cover securely.
The waterproof and dustproof properties are ensured when it is
securely closed. Even a small object (hair, sand, tiny fiber, etc.)
trapped between contact surfaces may cause ingress of liquid or
dust.
•
If liquid such as water is splashed onto the product with the au Nano
IC Card 04/microSD memory card cover opened, the liquid may
enter it, causing electric shock or a fault. Discontinue use and turn off
the power and then contact your local au shop or Keitai Guarantee
Service Center.
•
When the product is wet, wipe it with a dry, clean cloth.
•
When your hand or the product is wet or a foreign object is adhered
to it, never open/close the au Nano IC Card 04/microSD memory
card cover.
•
The product is only resistant to fresh/tap water at room temperature
(5
°
C to 35
°
C). If you let the product get wet with or submerged in
liquids other than fresh/tap water at room temperature, discontinue
use and wash it with fresh/tap water at room temperature.
•
Do not use the earphone/microphone jack or external connection
jack when it is wet or sand or dust is adhered to it. Doing so may
impair the waterproof and dustproof properties or cause electric
shock, short circuit, etc. resulting in fire, burns, or a fault.
How to Close the au Nano IC Card 04/microSD Memory
Card Cover
Reinsert the hinge of the au Nano IC Card 04/microSD memory card
cover as shown (
①
); place the cover over the opening so that there is
no gap between the product and cover, and then push the cover in
the direction of the arrow (
②
) to close. When closing the cover, push it
firmly all the way to the hinge as shown (
③
).
Hinge
①③
②
Dustproof Property of the Product
•
The dustproof property of the product only guarantees a protection
rating equivalent to IP5X and does not guarantee its performance
under other circumstances such as when the product is directly
placed on sand at a beach, etc.
•
If dust is adhered to the product, immediately wash it away with
water or otherwise clear it completely before use.
•
Any dust adhered to the product might cause a fault such as
malfunction of the sliding part of the camera slide cover.
Notes on Using the Product
•
Do not let the product get wet with or submerged in liquids other
than tap water (seawater, pool water, spa water, soapy water,
detergent solutions, bubble baths, juice, condiments, etc.). In
addition, do not use the product in places subject to pet urine.
If the product gets exposed to such liquids, wash away with tap
water immediately.
•
Wash away salt water, seawater, drink, condiments, food, mud, soil
or any other foreign object immediately.
If allowed to dry, it will be difficult to remove the residue and may
cause scratching or a fault.
•
Wash away sand, mud, etc. completely; any residue may scratch or
damage the product, or otherwise cause a fault.
•
Do not immerse the product in a bathtub or swimming pool. In
addition, do not use it under water (including key operations).
•
The product is not designed to resist water pressure. Do not expose
the product to a high-pressure flow of tap water, shower, etc. (6
liters/min or more) or submerge it under water.
•
Extreme temperature changes may cause condensation, resulting in
a fault. Wait until the product reaches room temperature before you
bring it from a cold place into a warm place. If condensation occurs,
leave the product in room temperature until the condensation
evaporates.
•
Do not expose the product to hot water or hot air from a hair dryer,
etc. or use it in saunas. The product is not heat resistant.
•
Ingress of water into the earpiece (receiver)/speaker or mouthpiece
(microphone) may lower the volume temporarily. Drain water and dry
the product well before use.
•
The product does not float on water.
•
Do not use the product in heavy rain.
•
Do not leave the product wet. Doing so in cold places might cause
the liquid/moisture to freeze, resulting in a fault.
•
Do not place the product directly on sand at a beach, sandbox, etc.
or on mud. Sand may enter the earpiece (receiver)/speaker, etc.,
causing the volume to drop. Letting sand or other small particles
enter the product might cause overheating or a fault.
•
Letting sand or other small particles enter the sliding part of the
camera slide cover might cause excessive friction or noise when the
cover is opened/closed.
•
If the au Nano IC Card 04/microSD memory card cover is worn or
damaged, the waterproof and dustproof properties cannot be
maintained.
•
Do not use or store the product in humid places such as a bathroom
or kitchen for an extended period.
•
The product is not resistant to impact. Do not drop or subject to
impact. In addition, do not poke the earpiece (receiver)/speaker,
mouthpiece (microphone), air vent, etc. with a sharp object. Doing so
might damage or deform the product, resulting in impairment of the
waterproof and dustproof properties.
Maintaining the Waterproof and Dustproof
Properties
Rubber Seal
The rubber seal on the au Nano IC Card 04/microSD memory card
cover is important to maintain the waterproof and dustproof properties.
Observe the following:
•
Do not remove or scratch it.
•
When closing the au Nano IC Card 04/microSD memory card cover,
do not get the rubber seal caught. In addition, do not insert a sharp
object into gaps around the au Nano IC Card 04/microSD memory
card cover, the earphone/microphone jack or external connection
jack.
Doing so may damage the rubber seal, causing ingress of liquid or
dust
•
To maintain the waterproof and dustproof properties, it is
recommended that you replace the parts once every two years
regardless of their condition (paid service). For information on part
replacement, contact your local au shop.
8
Precautions for Charging
The desktop holder, specified charger (sold separately) and optional
accessories are not waterproof/dustproof. Be sure to check the
following before and after charging.
•
Check that there is no water drop or foreign object on the product. If
a foreign object is adhered to the product, wash it away immediately.
In addition, if the product is wet, drain water well and wipe it with a
dry, clean cloth, etc. before inserting the microUSB plug into the
external connection jack.
•
Never connect the microUSB plug when the product or specified
charger (sold separately) is wet or a foreign object is adhered to it.
Although the product is waterproof and dustproof, the specified
charger (sold separately) is not waterproof or dustproof. If the
microUSB plug is inserted while the product or charger is wet or dirty,
water or a foreign object on the product or microUSB plug might
cause electric shock, short circuit or corrosion, resulting in abnormal
overheating, burnout, fire, burns or a fault.
•
Do not touch the desktop holder or specified charger (sold
separately) with wet hands. Doing so might cause electric shock.
•
Do not expose the desktop holder, specified charger (sold separately)
or optional accessories to water. Do not use them in places where
water is regularly used, such as a bathroom, shower room, kitchen
and washroom. Doing so might cause fire, burns, electric shock, a
fault, etc. In addition, do not bring them into such places even if you
are not using them for charging. Doing so might cause fire, burns,
electric shock, a fault, etc.
Washing the Product
If stain, dust, sand, soft drink, etc. is adhered to the surface of the
product, gently wipe it off with a cloth and wash the product under a
low-pressure flow of tap water (up to 6 liters/min) at room temperature
(5
°
C to 35
°
C) approximately 10 cm away from the faucet or shower
head.
When washing the sliding part of the camera slide cover, shake the
product under tap water in a container with the cover open.
Holding the au Nano IC Card 04/microSD memory card closed, wash
the product with your hands without using a brush or sponge. After
washing the product, drain water and then use the product.
•
Make sure that the au Nano IC Card 04/microSD memory card cover
is securely closed before washing the product.
•
Do not wash the product in a washing machine or ultrasound bath.
•
The earphone/microphone jack and external connection jack are
especially susceptible to dust, sand and other particles. Wash it away
thoroughly. After washing it away, make sure the jacks are dried off
before using the product. Any residue in the jacks may cause a fault.
•
When cleaning the earphone/microphone jack or external connection
jack, do not use tools such as a cotton swab or push a cloth into the
jack. Doing so might cause impairment of the waterproof and
dustproof properties, resulting in fire, burns, or a fault.
•
Never put the product in a microwave oven for drying it. Doing so
might cause the internal battery to leak, overheat, burst or ignite. In
addition, it might cause the product to overheat, emit smoke or
ignite, or destroy its circuit components.
•
Do not expose the product to hot air from a hair dryer or leave it in a
high temperature environment for drying it. Doing so might cause the
product to deform, discolor, malfunction, etc.
Draining Water
If the product is wet, be sure to drain water from the earphone/
microphone jack, external connection jack, earpiece (receiver)/speaker,
mouthpiece (microphone), sub microphone, keys (Power key, Volume
up/down key, Shutter key, Phone key, Home key, Mail key), camera
slide cover, air vent, etc.
1
Wipe off water on the surface of the product
thoroughly with a dry, clean cloth, etc.
If a strap is attached, dry it sufficiently as well.
2
Hold the product securely and shake it
approximately 20 times until there is no more
water splashing
Check the safety of your surroundings; while shaking the product,
hold it securely so as not to drop it.
Mouthpiece
(microphone)
External
connection jack
Earpiece (receiver)/
speaker
Volume up/
down key
Shutter key
Earphone/
microphone jack
Sub microphone
Power key
Phone key,
Home key, Mail key
Camera slide cover
Air vent
3
Pat the product against a dry, clean cloth, etc. to
remove moisture from the grooves
Water may be trapped in the openings; put a cloth against them
and pat the product to remove the water. Make sure that there is
no water or foreign object left in the openings.
4
Leave the product on a dry cloth, etc. for
approximately 2 to 3 hours at room temperature to
dry it
After wiping off the water, water remaining in the product may seep
out, if any.
Do not wipe off water trapped in the grooves directly with a cotton
swab, etc.
Precautions to be Taken after Water Draining
Do not use the product with water drops left on it.
•
Doing so might cause call failure or wet clothes, bags, etc.
•
Doing so might cause the earphone/microphone jack, external
connection jack, etc. to short-circuit, causing fire or a fault.
•
Doing so in cold places might cause the water drops to freeze,
resulting in a fault.
9
Notes on Using Bluetooth®/Wireless
LAN (Wi-Fi®) Functions
Precautions for Bluetooth
®
•
The Bluetooth® function of the product conforms to the domestic
standards of Japan, FCC standards and EC directives, and has been
certified.
•
The 2.4 GHz band used by wireless LAN (Wi-Fi®) and Bluetooth®
devices is shared by various other devices. For this reason,
Bluetooth® devices use technologies for minimizing effects from other
devices using the same radio frequency band. In some cases,
however, the communication speed and connectable range may be
decreased, or disconnection may occur, due to interference by other
devices.
•
The communication speed and connectable range vary depending
on the distance between communication devices, obstacles and the
connected devices used.
Precautions for Wireless LAN (Wi-Fi®)
•
The wireless LAN (Wi-Fi®) function of the product conforms to the
domestic standards of Japan, FCC standards and EC directives, and
has been certified.
•
Do not use the product in places where electromagnetic waves are
generated or near electric products, AV and OA equipment, or other
magnetized devices.
•
Subjecting the product to magnetic or electrical noise might increase
noise or prevent it from performing communications. (The product is
particularly susceptible to noise when it is used near a microwave
oven.)
•
Using the product near a TV, radio or similar appliance might cause
reception interference or disrupt TV images.
•
Search for access points might not be successful if there are multiple
wireless LAN (Wi-Fi®) access points near the product and the same
channel is being used.
•
The communication speed and connectable range vary depending
on the distance between communication devices, obstacles and the
connected devices used.
Frequency Band
Bluetooth® and wireless LAN (Wi-Fi®) functions (2.4 GHz band) of the
product use frequencies in the 2.4 GHz band ranging from 2.402 GHz
to 2.480 GHz.
To view information on frequency band, perform the following
operations.
Home screen
→
[
設定
] under "
ショートカット
"
→
[All settings menu]
→
[About phone]
→
[Authentication]
•
Bluetooth® function: 2.4FH1/XX4
The product uses the 2.4 GHz band.
FH1 uses FH-SS as the modulation scheme. The interference
distance is about 10 m or less.
XX4 uses other schemes. The interference distance is about 40 m or
less.
Bands of mobile unit identification devices cannot be avoided.
•
Wireless LAN (Wi-Fi®) function: 2.4DS/OF4
The product uses the 2.4 GHz band.
DS-SS and OFDM are used as the modulation schemes. The
interference distance is about 40 m or less.
Bands of mobile unit identification devices can be avoided.
Channels available with the 2.4 GHz band wireless LAN (Wi-Fi®) of
the product are between 1 and 13.
Available channels differ depending on the country.
For use on airplanes, check with the respective airlines in advance.
Precautions for Use of Bluetooth
®
Function
The frequencies used by the Bluetooth® function of the product are in
the 2.4 GHz band. In this frequency band, in addition to home
electrical appliances such as microwave ovens and industrial, scientific
and medical devices, other similar wireless stations, in-plant wireless
stations for mobile unit identification that require a license for use such
as factory production lines, specific small power wireless stations that
do not require licenses, and amateur wireless stations (collectively
called "other wireless stations" from here on) are operated.
1. Before using the product, make sure that "other wireless stations"
are not in operation nearby.
2. In the event that instances of radio wave interference have occurred
between the product and "other wireless stations," immediately
either relocate the product or stop operation of the device (stop the
emission of radio waves).
3. If you are unclear on any points or are troubled by anything, contact
an au shop or Customer Service Center.
Precautions for Use of 2.4 GHz Band Wireless LAN
(Wi-Fi
®
)
The frequencies used by the wireless LAN (Wi-Fi®) function of the
product are in the 2.4 GHz band. In the 2.4 GHz frequency band, in
addition to home electrical appliances such as microwave ovens and
industrial, scientific and medical devices, other similar wireless stations,
in-plant wireless stations for mobile unit identification that require a
license for use such as factory production lines, specific small power
wireless stations that do not require licenses, and amateur wireless
stations (collectively called "other wireless stations" from here on) are
operated.
1. Before using the product, make sure that "other wireless stations"
are not in operation nearby.
2. In the event that instances of radio wave interference have occurred
between the product and "other wireless stations," immediately
either relocate the product or stop operation of the device (stop the
emission of radio waves).
3. If you are unclear on any points or are troubled by anything, contact
an au shop or Customer Service Center.
◎
Connections between the product and all other Bluetooth® and
wireless LAN (Wi-Fi®) devices have not been confirmed. Therefore,
connections with all Bluetooth® and wireless LAN (Wi-Fi®) devices
are not guaranteed.
◎
The product supports security features for wireless
communications that are compliant with the Bluetooth® and
wireless LAN (Wi-Fi®) standard specifications, but the security may
not be sufficient depending on the usage environment and
configuration.
Be careful when establishing data communication using
Bluetooth® or wireless LAN (Wi-Fi®) function.
◎
Wireless LAN (Wi-Fi®) has the advantage that it can be freely
connected anywhere within the radio wave range, as it uses radio
waves for exchanging information. At the same time, there is a risk
that a malicious third party may obtain unauthorized access if
security settings have not been configured. You are recommended
to configure security settings before using wireless LAN (Wi-Fi®) at
your own discretion and risk.
◎
The Company assumes no responsibility for leakage of data or
information that may occur during Bluetooth®/wireless LAN (Wi-Fi®)
communication.
◎
Since Bluetooth® and wireless LAN (Wi-Fi®) functions use the
same frequency band, using the both functions at the same time
may cause radio wave interference resulting in decreased
communication speed or disconnection from the network. If
connection fails, stop using either of the Bluetooth® and wireless
LAN (Wi-Fi®) functions.
Notes on Voluntary Control of Radio
Interference
The product conforms to technical regulations pursuant to the Rules
for Voluntary Control Measures of VCCI; the corresponding conformity
mark is shown on the electronic rating plate on the product.
To view the electronic rating plate, perform the following operations.
Home screen
→
[
設定
] under "
ショートカット
"
→
[All settings menu]
→
[About phone]
→
[Authentication]
Notes on Packet Communication Fee
•
Since a constant Internet connection is possible with the product,
packet communication may be performed automatically by some
applications, resulting in high packet communication fees Therefore,
subscription to the flat-rate/discount service for packet
communication fees is recommended.
•
To browse websites, download applications, communicate using
applications, send/receive e-mails or configure various settings,
connection to the Internet is required, to which packet
communication fee applies.
(Packet communication fee does not apply to wireless LAN (Wi-Fi
®
).)
Notes on Applications
•
Be sure to check the security of the application, then install it at your
own risk. Some applications might cause virus infection, damage
various data, and send out your location information, usage history or
personal information stored in your cell phone via the Internet.
•
The Company assumes no responsibility for any problems caused by
applications you have installed. In such cases, you may be charged a
repair fee even during the warranty period.
•
The Company assumes no responsibility for any damages arising
from use of applications you have installed.
•
Some applications may not be used unless a microSD memory card
is inserted into the product.
•
Some applications keep the display turned on while they are active,
or rapidly drain the battery while running in the background.
•
Operation procedures and screen appearances of the applications
preinstalled in the product and those installed by you are subject to
change without notice as a result of version upgrade. In addition,
operation procedures described in the Basic Manual (this manual)
available on the au website and on the product may differ from the
actual procedures.
10
Getting Ready
Names and Functions of Parts
Front/Left Side/Right Side
②
①
⑤ ⑥ ⑦⑧ ⑨
③
④
⑩
⑪
⑫ ⑬ ⑭ ⑮ ⑯
󰒄
au Nano IC Card 04/microSD memory card cover
󰒅
au Nano IC Card 04 tray slot
󰒆
IMEI tray
The product's IMEI can be checked.
󰒇
microSD memory card slot
󰒈
Strap eyelet
󰒉
Proximity sensor/Light sensor
Proximity sensor prevents misoperation of the touch panel during a
call.
Light sensor adjusts the brightness of display according to the
ambient light level.
󰒊
Earpiece (receiver)/speaker
Hear the other party's voice during a call or play back answering
memos, etc. through this.
In addition, hear ringtones and alarm sounds.
󰒋
In camera lens
󰒌
Charging lamp
Illuminates in red or green while charging depending on the battery
level.
󰒍
u
(+)
d
(-) Volume up/down key
Adjust the volume.
Press and hold
d
(-) in the lock screen to set/disable the manner
mode.
󰒎
s
Shutter key
󰒏
Charging terminals
Use when charging with the desktop holder.
󰒐
c
Phone key
Make/receive calls. Flashes when there is a missed call.
󰒑
h
Home key
Return to the home screen.
󰒒
m
Mail key
Send/check mails. Flashes when there is a new mail.
󰒓
Display (touch panel)
Back/Top/Bottom
⑰
⑰
⑱
⑳
󰚫 󰚭
⑲
󰚬
󰚨
󰚩
󰚪
󰚜
󰚧
󰚮 󰚯
󰒔
Internal antenna
For talking on the phone or using the Internet, 4G (LTE/WiMAX 2+)
or UMTS.
󰒕
Mobile light
󰒖
Camera slide cover
Protects the out camera lens and infrared port. Slide down to
activate the camera.
󰒗
Infrared port
Send/receive data using infrared communication.
󰚜
TV antenna
󰚧
GPS antenna
󰚨
Wi-Fi®/Bluetooth® antenna
󰚩
Air vent
Helps maintain the product's performance.
󰚪
Out camera lens
󰚫
Earphone/microphone jack
Connect an earphone/microphone, SHARP TV antenna cable 02
(sold separately), etc. here.
󰚬
Sub microphone
Talk to the other party through this during a handsfree call.
󰚭
f
(
p
) Power key
Turn the display on/off.
Press and hold for power on/off or restart.
󰚮
External connection jack
Connect the common AC adapter 05 (sold separately), microUSB
cable 01 (sold separately), USB cable for peripherals (commercially
available), etc.
When the common AC adapter 05 (sold separately), microUSB
cable 01 (sold separately), etc. is connected, its magnetism may
affect the product's geomagnetic sensor, causing some applications
to malfunction. In such cases, remove the connected device.
󰚯
Mouthpiece (microphone)
Talk to the other party through this during a call. Also use while
recording videos or when talking to emopa.
◎
The back cover of the product is not removable. Do not try to
remove it; doing so might cause damage or a fault.
◎
The battery is built into the product and not user removable. To
force the power off, refer to "Forcing the Power Off" (
▶
P. 13).
au Nano IC Card 04/microSD Memory Card Cover
◎
Note that forcibly pulling or applying excessive force to the au
Nano IC Card 04/microSD memory card cover may damage it.
IMEI Tray
◎
The IMEI (international mobile station equipment identity) is a
unique number to identify cell phones. The product's IMEI can be
checked by sliding out the IMEI tray.
◎
The IMEI is required for repairs, after-sales services, etc.
◎
The IMEI tray cannot be removed from the main unit. Handle it
carefully so as not to apply excessive force.
◎
You can also check the IMEI by navigating through the menu.
Home screen
→
[
設定
] under "
ショートカット
"
→
[All settings menu]
→
[About phone]
→
[Status]
→
[SIM status]
→
Check the IMEI field
Display (Touch Panel)
◎
When you attach a compatible flip cover (commercially available)
to the product, you can turn the display on/off by opening/closing
the flip cover. The display may not turn off if the flip cover is
misaligned.
Proximity Sensor/Light Sensor, Earpiece (Receiver)/Speaker,
Mouthpiece (Microphone), Sub Microphone and Air Vent
◎
The earpiece is also a speaker. After you turn the speakerphone
on/off or end calls, the volume increases gradually to prevent loud
sound from coming out of the speaker near your ear.
◎
Do not place a sticker, etc. on the proximity sensor/light sensor.
Doing so might cause the sensor to malfunction.
◎
Covering the earpiece (receiver)/speaker, mouthpiece
(microphone), sub microphone, or air vent with a sticker, your
finger, etc. may hinder the performance of the product.
Internal Antenna, Wi-Fi®/Bluetooth® Antenna, GPS Antenna and
TV Antenna
◎
Antennas are built into the product. Do not cover the antenna
areas with your hand during calls or data communication. Doing
so may affect the call/communication quality.
11
Using the au Nano IC Card 04
au Nano IC Card 04
The au Nano IC Card 04 contains your phone number and other
information.
The product supports the au Nano IC Card 04.
IC (metal part)
Front Back
au Nano IC Card 04
Inserting the au Nano IC Card 04
Turn the product off before inserting the au Nano IC Card 04.
1
Open the au Nano IC Card 04/microSD memory
card cover
Use the notch to pull the cover toward you as shown (
①
), and then
rotate it in the direction of the arrow (
②
).
Notch
①②
2
Gently pull the au Nano IC Card 04 tray straight
out by hooking a finger on it
au Nano IC Card 04 tray
3
Place the au Nano IC Card 04 on the au Nano IC
Card 04 tray
Align the notches of the au Nano IC Card 04 and au Nano IC Card
04 tray, and then gently place the card on the tray.
au Nano IC Card 04
au Nano IC Card 04 tray
IC (metal part)
facing up
Notches
4
Gently insert the au Nano IC Card 04 tray into the
au Nano IC Card 04 tray slot
Check the position of the au Nano IC Card 04 tray slot and the
orientation of the au Nano IC Card 04 tray, and then insert the tray
all the way into the slot in the direction of the arrow. Forcing the
tray into the slot may damage the tray.
Metal parts
au Nano IC Card 04
tray slot
5
Close the au Nano IC Card 04/microSD memory
card cover (
▶
P. 7)
◎
If the au Nano IC Card 04 tray is not inserted properly, the product
may not function correctly.
◎
Take care not to lose or damage the removed au Nano IC Card 04
tray.
Removing the au Nano IC Card 04
Turn the product off before removing the au Nano IC Card 04.
1
Open the au Nano IC Card 04/microSD memory
card cover (
▶
P. 11)
2
Gently pull the au Nano IC Card 04 tray straight
out by hooking a finger on it
au Nano IC Card 04 tray
3
Remove the au Nano IC Card 04 from the au Nano
IC Card 04 tray
4
Gently insert the au Nano IC Card 04 tray into the
au Nano IC Card 04 tray slot
Check the position of the au Nano IC Card 04 tray slot and the
orientation of the au Nano IC Card 04 tray, and then insert the tray
all the way into the slot in the direction of the arrow. Forcing the
tray into the slot may damage the tray.
Metal parts
au Nano IC Card 04
tray slot
5
Close the au Nano IC Card 04/microSD memory
card cover (
▶
P. 7)
Using a microSD Memory Card
Inserting a microSD Memory Card
1
Open the au Nano IC Card 04/microSD memory
card cover (
▶
P. 11)
2
Gently insert the microSD memory card into the
microSD memory card slot
Check the orientation of the card, and then insert the card in the
direction of the arrow until it clicks and is locked in place.
If you release the microSD memory card before it is locked in
place, it may pop out.
microSD
memory card slot
Metal part facing down
3
Close the au Nano IC Card 04/microSD memory
card cover (
▶
P. 7)
◎
Forcing the card into the slot upside down or in the wrong
direction may make the card unremovable or cause damage.
◎
Do not touch the terminals of the microSD memory card.
12
Removing the microSD Memory Card
Unmount the microSD card (
▶
P. 12) before removing it. Failure to do
so may corrupt data on the card or cause the card to malfunction.
1
Open the au Nano IC Card 04/microSD memory
card cover (
▶
P. 11)
2
Gently push the microSD memory card in all the
way
After a click, pull your finger back while touching the microSD
memory card until the card stops coming out. If you release the
card after pushing it in hard, it may jump out.
3
Gently pull the microSD memory card straight out
4
Close the au Nano IC Card 04/microSD memory
card cover (
▶
P. 7)
◎
Do not remove the microSD memory card forcibly. Doing so might
cause damage or loss of data on the card.
◎
The microSD memory card may become warm after a long period
of use. This is not a fault.
Unmounting the microSD Memory Card
1
Home screen
→
[
設定
] under "
ショートカット
"
→
[All
settings menu]
→
[Storage & USB]
Storage & USB screen appears.
2
[ ] beside the name of the microSD memory card
To mount the microSD memory card again: Storage & USB screen
→
Tap the name of the microSD memory card
→
[Mount].
Charging
Notes on Charging
The internal battery is not fully charged at the time of purchase. Be
sure to charge it before using the product.
•
If the performance of the internal battery does not recover, for
example, if the usable time is extremely short even after charging, the
battery may be at the end of its life. To check the charging
performance of the internal battery: Home screen
→
[
設定
] under
"
ショートカット
"
→
[All settings menu]
→
[About phone]
→
[Status]
→
[Battery status].
•
While charging, the charging lamp illuminates in red and appears in
the battery indicator. The charging lamp illuminates in green when the
charge is approximately 95%. The charging lamp goes out when the
charge is full.
◎
The product may become warm while charging. This is normal.
◎
The internal temperature of the product may increase depending
on the operation or usage environment, causing the product to
become hot. In such cases, charging may stop for safety.
◎
Charging may take longer if the product is in use (for the camera
or other functions).
◎
If you use the product while charging with the specified charger
(sold separately), the internal battery may charge and discharge
repeatedly in a short time. Frequent charging shortens the life of
the battery.
◎
If you charge the internal battery after it has run out, the charging
lamp may not illuminate soon (charging is in progress).
◎
If the charging lamp is flashing in red, force the power off (
▶
P. 13)
and then turn the product back on. If the lamp is still flashing, stop
charging and contact an au shop or the Keitai Guarantee Service
Center.
◎
The continuous talk time and continuous standby time (
▶
P. 22) are
average measurements obtained in strong signal conditions at
rest. The actual usable time may be less than half depending on
the charge on the battery, usage environment such as temperature
or signal reception, function settings, etc. See below for the
examples.
◎
Frequent use of the product in places where (out of service
area) appears on the display.
◎
Use of the Wi-Fi® function, Bluetooth® function, mail functions,
camera, TV, location information, etc.
◎
The display is set to remain turned on in applications, etc.
◎
Applications are running in the background.
◎
If you stop charging while the charging lamp illuminates, the
charge may not be full even if is displayed on the display. In
such cases, the usable time shortens.
Charging with the Desktop Holder
(SHV36PUA) and Specified AC Adapter
(Sold Separately)
Charge by connecting the desktop holder (SHV36PUA) and common
AC adapter 05 (sold separately). For details on the specified AC
adapter (sold separately), refer to "Introduction of Peripheral Devices"
(
▶
P. 19).
1
Insert the microUSB plug of the common AC
adapter 05 (sold separately) into the connection
terminal of the desktop holder (SHV36PUA)
Check the orientation of the microUSB plug, and then insert it in
the direction of the arrow.
Tabs
Connection terminal
Common AC adapter
05 (sold separately)
Desktop holder
(SHV36PUA)
2
Place the product in the desktop holder
(SHV36PUA)
Place it as shown below.
Desktop holder
(SHV36PUA)
3
Plug the power plug of the common AC adapter 05
(sold separately) into a 100 V AC outlet
Common AC adapter 05
(sold separately)
4
When charging is complete, remove the product
from the desktop holder (SHV36PUA), and then
unplug the power plug of the common AC adapter
05 (sold separately) from the outlet.
Hold the desktop holder (SHV36PUA) when removing the product
from it.
When removing the microUSB plug of the common AC adapter 05
(sold separately) from the desktop holder (SHV36PUA), pull it
straight out.
◎
When using the desktop holder (SHV36PUA), connect only the
specified charger (sold separately) to it. Do not connect
unspecified equipment such as a PC or portable charger to the
desktop holder (SHV36PUA); doing so might cause a fault.
◎
Although charging is possible even while the product is turned on,
charging takes longer.

Navigation menu