Sharp NAR0058 GSM900/DCS1800/PCS1900 Tri band cellular phone User Manual Manual revised 1

Sharp Corporation GSM900/DCS1800/PCS1900 Tri band cellular phone Manual revised 1

UserManual.wiki >

Sharp >

NAR0058 User Manual >

Manual revised 1 HTML Version

Manual revised 1

1-1

Introduction

Thank you for purchasing this SHARP mobile handset.

Before and while using the handset, please read this

manual thoroughly and retain it for future reference. This

handset is your partner. Handle it carefully at all times to

ensure its long-term performance.

About this Operation Manual

Instruction scheme

Instructions in this manual are carefully designed to help

you operate the handset smoothly and easily. At the

beginning of each section, the steps that have to be

followed to reach the function you wish to utilise are

shown (Example 1). The steps for all subsequent

subsections are simplified (Example 2). Make sure to

press B to enter your selection.

Example 1:

(Excerpt from “Viewing the Contacts List” on page 9-54)

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Contacts”

and press B.

3Press a or b to highlight “Contacts list” and

press B.

The index view of the “Contacts list” appears.

In example 1, each step to reach the “Contacts list” is

shown.

Example 2:

(Excerpt from “Selecting the Memory for saving” on

page 9-55)

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press C [Options].

The “Options” menu appears.

In example 2, the steps to reach the “Contacts list” are

simplified as shown above (step1).

Symbols

B, a, b, c, d and C [Options] indicate the

operation keys in this manual. For information on

the keys and handset operations, refer to “Parts

and Controls” on page 4-22.

This indicates useful extra information for

operating the handset.

This indicates important background information

or items that need to be recognised when

operating the handset.

This indicates operations that require extreme

caution before performing on the handset.

e_tm200_7fm.book Page 1 Tuesday, November 9, 2004 9:14 PM

1-2

Introduction

NOTICE

We strongly recommend that you keep separate

permanent written records of all important data. Data

may be lost or altered in virtually any electronic

memory product under certain circumstances.

Therefore, we assume no responsibility for data lost or

otherwise rendered unusable, whether as a result of

improper use, repairs, defects, battery replacement,

use after the specified battery life has expired or any

other cause.

We assume no responsibility, directly or indirectly, for

financial losses or claims from third parties resulting

from the use of this product and any of its functions,

such as stolen credit card numbers, the loss or

alteration of stored data, etc.

All company and/or product names are trademarks

and/or registered trademarks of their respective

holders.

Screen layouts illustrated in this operation manual

may differ from those on the handset.

The information described in this operation manual is

subject to change without notice.

Some of the functions described in this operation

manual may not be supported by all networks.

We assume no responsibility for content, information,

etc. downloaded from the network.

The CGS-LCD used for the main display is a world

advanced technology product, giving you fine picture

quality. Occasionally, a few black or bright pixels may

appear on the screen. Please note that this will not

have any impact on any of the features or

performance.

According to copyright laws, the reproduction, alteration

and use of material protected by copyright (music,

pictures, etc.) is only permitted for personal or private use.

If the user is not in possession of more extensive

copyrights or has not received explicit permission from

the copyright owner to reproduce, alter or use a copy

which is made or modified in this way, this is considered

to be a violation of the copyright laws and gives the

reason, avoid the illegal use of material protected by

Windows is a registered trademark of Microsoft

Corporation in the United States and/or other countries.

e_tm200_7fm.book Page 2 Tuesday, November 9, 2004 9:14 PM

1-3

Introduction

Java and all Java-based trademarks and logos are

trademarks or registered trademarks of Sun Microsystems,

Inc. in the U.S. and other countries.

JBlend and all JBlend-based trademarks and logos are

trademarks or registered trademarks of Aplix Corporation in

Japan and other countries.

In this product, JBlend™ is incorporated.

JBlend™ is a Java execution environment

that Aplix developed for implementing

advanced performance and fast operation

on small-memory systems. JBlend and

JBlend logo are trademarks or registered

trademarks of Aplix Corporation in Japan

and other countries.

Licensed by Inter Digital Technology Corporation under one

or more of the following United States Patents and/or their

domestic or foreign counterparts and other patents

pending, including U.S. Patents: 4,675,863: 4,779,262:

4,785,450 & 4,811,420.

Licensed under U.S. Patent 4,558,302 and foreign

counterparts.

CP8 PATENT

SD logo is a trademark.

T9 Text Input is licensed under one or more of the following:

U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928

and 6,011,554; Australian Pat. No. 727539; Canadian Pat.

No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong

Kong Standard Pat. No. HK0940329; Republic of Singapore

Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/

DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.

Nos. KR201211B1 and KR226206B1; and additional

patents are pending worldwide.

Use of this product in any manner that complies with the

MPEG-4 Visual Standard is prohibited, except for use

directly related to (a) data or information ( i ) generated by

and obtained without charge from a consumer not thereby

engaged in a business enterprise, and ( ii ) for personal use

only; and (b) other uses specifically and separately licensed

by MPEG LA, L.L.C.

Bluetooth is a trademark of the Bluetooth SIG, Inc.

The Bluetooth word mark and logos are owned by the

Bluetooth SIG, Inc. and any use of such marks by Sharp is

under license. Other trademarks and trade names are

those of their respective owners.

e_tm200_7fm.book Page 3 Tuesday, November 9, 2004 9:14 PM

1-4

Introduction

Safety Precautions and

Conditions of Use

Your handset conforms to international regulations

insofar as it is used under normal conditions and in

accordance with the following instructions.

Electromagnetic waves

Do not turn on your handset aboard an aircraft (as your

handset may interfere with the aircraft’s electronic

systems and disrupt the cellular network). Current

legislation forbids use and legal action can be taken

against the user.

Do not turn on your handset in a hospital, except in

designated areas. Use of your handset’s functions

may affect the performance of electronic medical

devices (pacemakers, hearing aids, insulin pumps,

etc.). When handset functions are on, do not bring it

near medical equipment or into areas in which medical

equipment is being used. If you have a hearing aid or

a pacemaker, only use the handset on the opposite

side of your body from where it is located. The handset

should be kept at least 15.24 cm (6 inches) from a

pacemaker ANYTIME the handset is switched on.

Do not turn on your handset near gas or flammable

substances. Observe the rules concerning the use of

handsets at petrol stations, chemical plants and at all

sites where a risk of explosion exists.

Caring for your handset

Do not allow children to use your handset without

supervision.

Never attempt to disassemble, repair or modify your

handset. Such action may result in bodily injury or

damage to the unit or other property. The product can

only be repaired by authorised service personnel.

Never allow any metallic objects (e.g., staples, paper

clips) to become inserted into your handset, as this

could result in the generation of excess heat or fire.

Do not use solvents to clean your handset. Use only a

soft, dry cloth.

Do not drop your handset or subject it to severe

impacts. Bending the body and pushing the display or

keys with force can damage the handset.

Do not carry your handset in your back pocket as it

could break when you sit down. The display is made of

glass and is particularly fragile.

Never touch liquid that may leak from a broken liquid

crystal display (LCD), as doing so may cause a skin

rash.

Avoid touching the external connector on the

underside of the handset, since the delicate

components within can be damaged by static

electricity.

Never use or store your handset in the following

locations:

- Anywhere it may be exposed to water (e.g,

bathroom or sauna)

e_tm200_7fm.book Page 4 Tuesday, November 9, 2004 9:14 PM

1-5

Introduction

- Conditions of high humidity (e.g., rain or fog)

- Conditions of extreme high temperatures (e.g.,

near fire or in a sealed automobile)

- In direct sunlight

- Locations or sites subject to strong vibration

It is advised that the device not be used by a driver

while the vehicle is moving except in an emergency.

Speak only into a fixed, neck-slung or clipped-on

microphone when it will not distract your attention from

the road. Also see “Precautions Concerning Vehicle

Use” on page 1-7.

Never dispose of your device with ordinary waste.

Battery

Use your handset only with batteries, chargers and

accessories recommended by the manufacturer. The

manufacturer disclaims any liability for damage

caused by the use of other chargers, batteries or

accessories.

Use only the standard accessory battery (CE-BL200).

Recommended temperature for using and storing

batteries is approximately 20°C (68°F).

The battery’s performance is limited in low

temperatures, particularly below 0°C (32°F) and the

handset may not work temporarily regardless of the

amount of remaining battery power.

Exposing the handset to extreme temperatures will

shorten battery life.

The battery can be charged and discharged hundreds

of times but it will eventually wear out. When the

operating time (talk time and standby time) is

noticeably shorter than normal, it is time to buy a new

battery.

Network configuration and handset usage will affect

talk time and standby time. Using games, camera or

Music Player will hasten battery consumption.

When the battery charging alert is displayed on the

screen, charge the battery as soon as possible. If you

continue using your handset ignoring the alert, the

handset may malfunction and all data and settings you

have stored may be lost at any moment.

Charge the new battery as soon as possible after

removing the old one.

Before removing the battery from the handset, make

sure the handset is turned off.

Do not touch the battery terminals. Batteries can

cause damage, injury or burns if a conductive material

touches exposed terminals. When the battery is

detached from the handset, use a cover made of

nonconductive material to keep and carry the battery

safely.

Never attempt to disassemble or modify the battery.

Never touch any fluid that may leak from the internal

battery, as doing so may result in injury to the skin or

eyes.

e_tm200_7fm.book Page 5 Tuesday, November 9, 2004 9:14 PM

1-6

Introduction

Never drop your handset or subject it to severe shock.

This may cause the internal battery to leak, ignite

and/or rupture. Immediately remove your handset

from the vicinity of any open flame in the event the

internal battery leaks or emits an unusual odour.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED

BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING

TO THE INSTRUCTIONS

See “Battery Disposal” below.

Battery Disposal

Take the used battery to the local waste depot.

Do not expose the used battery to an open flame. Do

not dispose in water or dispose with household waste.

BATTERY DISPOSAL

THIS PRODUCT CONTAINS LITHIUM-ION BATTERY.

THIS BATTERY MUST BE DISPOSED OF PROPERLY.

CONTACT LOCAL AGENCIES FOR INFORMATION ON

RECYCLING AND DISPOSAL OPTIONS IN YOUR

AREA.

Aerial Care

Do not touch the aerial unnecessarily while using the

handset. If it is held, call quality may be hindered

leading to shortened talk-time and stand-by time

because the handset may have to operate on a higher

power level than is necessary.

Use only the aerial supplied or one approved by Sharp

for your handset. Using unauthorised or modified

aerial may damage the handset. Moreover, since the

handset may violate the appropriate regulations, it

may lose performance or exceed the limitation of SAR

levels.

To avoid impaired performance, do not damage the

aerial of the handset.

While talking directly into the microphone, hold the

handset so that the aerial is upwards over your

shoulder.

To avoid interfering with blasting operations, please

turn off the handset in a blasting area or in a place

where a “turn off two-way radio” sign is posted.

RF Connector

This RF connector is for connecting Sharp-approved

aerial to the handset. Do not connect unapproved or

modified equipment as this may damage the handset

or cause the SAR limit to be exceeded.

Do not touch or crowd the connector unnecessarily as

this may affect standby and call times.

e_tm200_7fm.book Page 6 Tuesday, November 9, 2004 9:14 PM

1-7

Introduction

Camera Operation

Learn picture quality, file formats, etc. beforehand.

Pictures are saved in JPEG format.

Be careful not to move your hand while taking pictures.

If the handset moves while taking a picture, the picture

may be blurred. When taking a picture, hold the

handset firmly or use the delay timer to prevent it from

moving.

Clean the lens before taking a picture. Fingerprints, oil,

etc. on the lens hinder focusing. Wipe with a soft cloth

before taking a picture.

Miscellaneous

As the handset uses an electronic storage unit, data

may be lost or corrupted under various circumstances.

Before connecting the handset to a PC or a peripheral

device, read the operation manual carefully.

If the handset’s battery has been removed for some

time its or the handset has been reset, the unit’s clock

and calendar may be initialised. The date and time

should be updated.

Use only the included headset for hands-free

operation. Some handset functions may not work

when unauthorised hands-free are used.

The handset uses a magnet to recognise that the

handset is closed. Do not place magnetic cards near

your handset or get the card caught in the handset as

it may damage the recorded data.

Environment

Keep your handset away from extreme heat. Do not

leave on the dashboard of a car or near a heater. Do

not leave it in any place that is extremely damp or

dusty.

Since this product is not waterproof, do not use it or

store it where fluids can splash onto it. Raindrops,

water spray, juice, coffee, steam, perspiration, etc.

may also cause a malfunction.

Precautions Concerning Vehicle Use

It is the user’s responsibility to verify if local laws

permit the use of a handset in a vehicle. Give full

attention to driving. Pull off onto the side of the road

and park the car before making or answering a call.

If local laws permit, we recommend that you use your

handset with the included hands-free Kit.

Refrain from putting the stereo headset (supplied) into

both ears while you are driving.

Use of your handset’s functions may interfere with the

vehicle’s electronic systems, such as the ABS antilock

brakes or the air-bag. To ensure no such problem

occurs, please check with your dealer or car

manufacturer before using your handset.

Only allow qualified service personnel to install the

vehicle accessories. The manufacturer disclaims any

liability for damage which may result as a

consequence of improper use or use contrary to the

instructions contained herein.

e_tm200_7fm.book Page 7 Tuesday, November 9, 2004 9:14 PM

1-8

Introduction

FCC Declaration of Conformity

Triple-band phone: TM200 with USB cable(CE-UC32)

and AC charger(CE-EA32)

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Responsible Party:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430

TEL:1-800-BE-SHARP

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

FCC Notice

The phone may cause TV or radio interference if used in

close proximity to receiving equipment. The FCC can

require you to stop using the phone if such interference

cannot be eliminated.

Information To User

This equipment has been tested and found to comply with

the limits of a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation; If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

1Reorient/Relocate the receiving antenna.

2Increase the separation between the equipment

and receiver.

3Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

4Consult the dealer or an experienced radio/TV

technician for help.

CAUTION: Changes or modifications not expressly

approved by the manufacturer responsible for

compliance could void the user’s authority to

operate the equipment.

e_tm200_7fm.book Page 8 Tuesday, November 9, 2004 9:14 PM

1-9

Introduction

Exposure to Radio Waves

THIS MODEL PHONE MEETS THE GOVERNMENT’S

REQUIREMENTS FOR EXPOSURE TO RADIO

WAVES.

Your wireless phone is a radio transmitter and receiver. It

is designed and manufactured not to exceed the emission

limits for exposure to radio frequency (RF) energy set by

the Federal Communications Commission of the U.S.

Government. These limits are part of comprehensive

guidelines and establish permitted level of RF energy for

the general population.

The guidelines are based on standards that were

developed by independent scientific organizations

through periodic and thorough evaluation of scientific

studies. The standards include a substantial safety

margin designed to assure the safety of all persons,

regardless of age and health. The exposure standard for

wireless mobile phones employs a unit of measurement

known as the Specific Absorption Rate, SAR. The SAR

limit set by the FCC is 1.6W/kg, * Tests for SAR are

conducted using standard operating positions specified

by the FCC with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a wireless

base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it

must be tested and certified to the FCC that it does not

exceed the limit established by the government-adopted

requirement for safe exposure. The tests are performed in

positions and locations (e.g., at the ear and worn on the

body) as required by FCC for each model. The highest

SAR value for this model phone when tested for use at the

ear is 0.631W/kg and when worn on the body, as

described in this operation manual is 1.42W/kg.

Body-worn Operation; This device has been tested for

typical body-worn operations with the back of the phone

touching the body. Body-worn operations are restricted to

belt-clips, holsters or similar accessories that have no

metallic component in the assembly. The use of

accessories that do not satisfy these requirements may

not comply with FCC RF exposure requirements, and

should be avoided. While these may be differences

between the SAR levels of various phones and at various

positions, they all meet the government requirement for

safe exposure.

The FCC has granted an Equipment Authorization for this

model phone with all reported SAR levels evaluated as in

compliance with the FCC RF emission guidelines. SAR

information on this model phone is on file with the FCC

and can be found under the Display Grant section of

http://www.fcc.gov/oet/fccid after searching on FCC ID

APYNAR0058.

e_tm200_7fm.book Page 9 Tuesday, November 9, 2004 9:14 PM

1-10

Introduction

Additional information on Specific Absorption rates (SAR)

can be found on the Cellular Telecommunications &

Internet Association (CTIA) web-site at:

http://www.phonefacts.net

*In the United States and Canada, the SAR limit for

mobile phones used by the public is 1.6Watts/kg (W/kg)

averaged over one gram of tissue. The standard

incorporates a substantial margin of safety to give

additional protection for the public and to account for any

variations in measurements.

Declaration of Conformity

SAR

Your handset has been designed, manufactured and

tested so as not to exceed the limits for exposure to

electromagnetic fields recommended by the Council of

the European Union. These limits are part of

comprehensive guidelines developed by independent

scientific organizations. The guidelines include a

substantial safety margin designed to assure the safety of

the handset user and others and to take into account

variations in age and health, individual sensitivities and

environmental conditions. European standards provide

for the amount of radio frequency electromagnetic energy

absorbed by the body when using a handset to be

measured by reference to the Specific Absorption Rate

(SAR). The SAR limit for the general public is currently 2

watts per kilogram averaged over 10 grams of body

tissue. Your handset SAR value is 0.265 watts per

kilogram.

This has been tested to ensure that this limit is not

exceeded even when the handset is operating at its

highest certified power. In use however your handset may

operate at less than full power because it is designed to

use only sufficient power to communicate with the

network.

Hereby, Sharp Telecommunications of Europe Ltd, declares

that this TM200 is in compliance with the essential

requirements and other relevant provisions of Directive

1995/5/EC.

A copy of the original declaration of conformity can be

found at the following Internet address:

http://www.sharp-mobile.com/tm/

e_tm200_7fm.book Page 10 Tuesday, November 9, 2004 9:14 PM

2-11

Table of Contents

Introduction ................................................. 1-1

About this Operation Manual ...............................1-1

NOTICE ................................................................1-2

Safety Precautions and Conditions of Use ...........1-4

FCC Declaration of Conformity ...........................1-8

Exposure to Radio Waves .....................................1-9

Declaration of Conformity ..................................1-10

SAR ....................................................................1-10

Quick Setup ............................................... 3-13

Using the Memory Card .....................................3-18

If You Upgrade Your Handset ............................3-21

Parts and Controls .................................... 4-22

Main Handset Unit ..............................................4-22

Display Indicators ...............................................4-25

Guide to the Main Menu .......................... 5-28

Using the Main Menu .........................................5-28

List of Menu Function Items ..............................5-30

Basic Handset Operations ........................ 6-32

Making a Call .....................................................6-32

Answering a Call ................................................6-32

Redialling ............................................................6-33

Useful Functions .................................................6-34

Using the Camera ...................................... 7-38

Taking Pictures ...................................................7-38

Shooting Video Images ......................................7-42

Common Functions & Information ....................7-45

Create Photo/Video Mode Indicators .................7-49

Entering Text ............................................. 8-51

Text Table for Multi-tap Input ...........................8-51

Selecting the Input Method ................................8-52

Selecting the Input Language .............................8-52

Using Text Templates ........................................8-53

Copying, Cutting and Pasting Text ....................8-53

Using the Contacts List ............................. 9-54

Contacts List Basics ...........................................9-54

Selecting the Memory ........................................9-55

Saving Information to the Contacts List ............9-56

Dialling from the Contacts List ..........................9-57

Editing the Contacts List ....................................9-59

Setting the Groups ..............................................9-63

Memory Status ...................................................9-65

Setting the Speed Dial List .................................9-65

Checking Own Numbers ....................................9-66

Accessing “t-zones” ................................. 10-67

Viewing the Browser ........................................10-67

Using the Message Service ...................... 11-68

Message Types Available with the Handset ....11-68

e_tm200_7fm.book Page 11 Tuesday, November 9, 2004 9:14 PM

2-12

Table of Contents

Creating and Sending Messages ...................... 11-69

Receiving and Reading Messages .................... 11-74

Deleting Messages ........................................... 11-78

Settings for the Messages ................................ 11-79

Making Text Templates ................................... 11-81

Using Voice Mail ............................................. 11-82

Memory Status ................................................. 11-83

Setting Cell Broadcasts .................................... 11-83

Setting Cell Info ............................................... 11-85

Browsing the WAP Alerts ............................... 11-85

Enjoying Multi Media ............................. 12-86

Using Pictures .................................................. 12-86

Using Sounds ................................................... 12-96

Using Games or Applications ........................ 12-106

Using Videos .................................................. 12-107

Using Music ................................................... 12-110

Memory Status ............................................... 12-113

Using the Personal Organiser ............... 13-114

Using the Calendar ......................................... 13-114

Using the Alarm ............................................. 13-116

Using the Calculator ...................................... 13-119

Using Memo Recording ................................. 13-120

Using the Phone Help .................................... 13-121

Using the Call History ........................... 14-122

Calling from the Call Log .............................. 14-122

Saving a Call Log to the Contacts List .......... 14-123

Deleting a Call Log ........................................ 14-124

Clearing Call Logs ......................................... 14-124

Checking the Duration of Calls ......................14-125

Checking the Cost of Calls .............................14-125

Checking the Amount of

Data Communication ......................................14-127

Setting the Handset ............................... 15-128

Setting the Display Language .........................15-128

Setting the Main Display ................................15-128

Setting the External Display ...........................15-132

Resetting the Phone Setting ............................15-135

Setting the Profiles ..........................................15-136

Call Settings ....................................................15-143

Call Forwarding ..............................................15-147

Setting Networks ............................................15-148

Setting the Date and Time ..............................15-151

Setting Security ...............................................15-153

Setting an Account ..........................................15-158

Customising Keys ...........................................15-162

Master Reset ...................................................15-163

Connecting to a PC ................................16-164

Installing Software ..........................................16-164

Connecting the Handset ..................................16-165

Troubleshooting ..................................... 17-167

Index ....................................................... 18-170

e_tm200_7fm.book Page 12 Tuesday, November 9, 2004 9:14 PM

3-13

Quick Setup

Quick Setup gives you the basic information you need to

start using your handset.

Step 1:

Unpacking

Check that the following items are included:

Handset (the battery cover attached)

Rechargeable Li-ion battery

AC charger

Hands free EARphone & MIC (Stereo)

Operation Manual

Some other brochures or supplements may also be

included.

Purchase SD memory card separately.

CONTAINS LITHIUM-ION BATTERY.

MUST BE DISPOSED OF PROPERLY.

Step 2:

Inserting the SIM Card and the

Battery

In order to access the available services, do not forget to

insert a SIM card and a battery. The SIM card carries the

user’s identity for accessing the network and also stores

personal information such as the phone directory and

SMS messages. Only use a 3V SIM card with your

handset.

If you already have a mobile phone before

purchasing this handset, you may use your

previous SIM card with the new handset. In this

case, refer to “If You Upgrade Your Handset” on

page 3-21.

e_tm200_7fm.book Page 13 Tuesday, November 9, 2004 9:14 PM

3-14

Quick Setup

1Press (c) and slide the battery cover in the

direction of the arrow (d).

2Remove the battery cover.

3Slide the SIM card into the SIM holder as

illustrated.

Do not touch the metal part of the SIM terminal.

e_tm200_7fm.book Page 14 Tuesday, November 9, 2004 9:14 PM

3-15

Quick Setup

4Position the battery with the model name

facing up. Insert its top end into slot (c) as

illustrated and insert the other end into

position (d).

5Align the battery cover with the battery

compartment as illustrated and slide it in the

direction of the arrow until it clicks.

Removing the SIM Card

In step 3 on page 3-14, press the tab securing the card

and slide it in the opposite direction from the SIM holder.

Step 3:

Charging the Battery

The battery is not fully charged when you purchase the

handset. Charge the battery for at least 2 hours before

using. Use only the included AC charger.

Using the Charger

1Insert the charger plug into an AC outlet.

2Open the external connector cap and insert

the charger (label facing up) into the USB/

Charger connector. The battery indicator in

the display ( ) starts animating.

e_tm200_7fm.book Page 15 Tuesday, November 9, 2004 9:14 PM

3-16

Quick Setup

3When charging is complete, the Indicator

stops animating.

Removing the charger

Disconnect the charger plug from the AC outlet and

unplug the charger from the handset.

To charge using the cigarette lighter charger

The optional cigarette lighter charger (CE-CL30) supplies

power for charging from the cigarette lighter socket of a

car.

Battery Status

Check the battery indicator displayed in the upper left of

the display to estimate remaining battery power. When

the battery is empty, “ ” appears on the display and

an alarm sounds. The battery may only last for another 5

minutes. If you are using your handset, charge the battery

immediately.

The standard charging time is approximately 2

hours.

Charging time may vary depending on the

state of the battery and other conditions. For

information on the battery, refer to “Battery” on

page 1-5.

Battery Indicators Charge Level

Sufficiently charged

Partially charged

Charging recommended

Charging required

Empty

e_tm200_7fm.book Page 16 Tuesday, November 9, 2004 9:14 PM

3-17

Quick Setup

Step 4:

Turning On Your Handset

Open the handset and press F and hold for

approximately 2 seconds.

The standby screen appears in the main display.

Turning Off Your Handset

Press F and hold for approximately 2 seconds.

Step 5:

Setting the Date and Time

Set the date and time before using the handset. If date

and time are left unset, you cannot operate some

time-based functions correctly.

1Open the handset.

2Press B.

The main menu appears.

3Press a, b, c or d to highlight “Settings”

and press B.

4Press a or b to highlight “Date & Time” and

press B.

5Press a or b to highlight “Set date/time” and

press B.

6Enter the month, day, year and time using the

digit keys and press B.

If you enter the time in the 12-hour format,

press P to switch between am and pm.

For information on key operations, refer to

“Parts and Controls” on page 4-22.

When turning on the handset, you may be

asked to enter a PIN (Personal Identification

Number) code. Enter it and press B. For more

information, refer to “If You Upgrade Your

Handset” on page 3-21 and the brochures

supplied with the SIM card.

For more information on how to set date and

time, refer to “Setting the Date and Time” on

page 15-151.

You can also use a, b, c or d to edit the

date and time.

e_tm200_7fm.book Page 17 Tuesday, November 9, 2004 9:14 PM

3-18

Quick Setup

Using the Memory Card

The data storage area of the handset can be enhanced by

using the memory card. If you wish to use the handset for

taking pictures or recording videos, sounds or music, use

of the memory card is recommended.

Inserting the Memory Card

1Turn off the handset.

2Open the SD memory card slot cover.

3Insert the memory card all the way in.

4Close the cover.

e_tm200_7fm.book Page 18 Tuesday, November 9, 2004 9:14 PM

3-19

Quick Setup

Memory Card Folder Configurations

Some folders are created on the memory card. The

pictures, sounds and video clips are stored in appropriate

folder.

Main Display

: Appears when the card is inserted.

: Appears when the card is inserted and locked.

: Appears when the card is damaged or unusable.

: Appears when the card is locked, damaged or

unusable.

: Appears when the card is being written or read (the

arrow in the icon is green.)

: Appears when the card is being formatted (the arrow

in the icon is red.)

External Display

: Appears when the card is inserted.

: Appears when the card is inserted and locked.

: Appears when the card is damaged or unusable.

: Appears when the card is locked, damaged or

unusable.

: Appears when the card is being written or read (the

arrow in the icon is green.)

: Appears when the card is being formatted (the arrow

in the icon is red.)

When you turn on the handset while the

memory card is in, the message “Memory card

is in” appears in the main display and the

memory card indicator is displayed in both the

main and external display.

When you insert the memory card while the

handset is turned on, the message “Memory

card is inserted” appears in the main display

and the memory card indicator is displayed in

both the main and external display.

Use SD memory cards up to 1 GB or MMC up

to 128 MB. Note that some types of MMC may

not be compatible with your handset.

The miniSD memory card with SD card adapter

cannot be used with your handset.

Be sure to insert the card in the correct

direction and orientation.

The SD memory card has a write-protect

switch that prevents you from deleting contents

by accident. If you slide the switch to the lock

position, you cannot save or delete files.

Do not open the memory card cover while the

memory card is being formatted, written or

read. The card may be damaged beyond use.

Keep all memory cards out of the reach of

small children.

e_tm200_7fm.book Page 19 Tuesday, November 9, 2004 9:14 PM

3-20

Quick Setup

Removing the Memory Card

1Turn off the handset.

2Open the SD memory card slot cover,

remove the card and close the cover.

Formatting the Memory Card

If you wish to clear all data stored in the memory card,

format the memory card according to the following steps.

The handset code is needed to format the memory card.

For information on the handset code, refer to “Enabling

the Handset Lock” on page 15-154.

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Settings”

and press B.

3Press a or b to highlight “Memory card” and

press B.

4Press a or b to highlight “Format” and press

5Enter your handset code and press B.

If you wish to cancel, press A [Back] before

entering the handset code.

When you remove the memory card while the

handset is turned on, the message “Memory

card is removed” appears in the main display

and the memory card icon disappears from

both the main and external displays.

Do not remove the memory card while the

memory card is being formatted, written or

read.

e_tm200_7fm.book Page 20 Tuesday, November 9, 2004 9:14 PM

3-21

Quick Setup

If You Upgrade Your Handset

If you have a mobile phone before purchasing this

handset, you may use your previous SIM card with the

new handset. In this case, you are required to prepare the

PIN code used for the old mobile phone to setup.

Entering the PIN Code

If you insert a SIM card you have used for your previous

mobile phone, you may be requested to enter a PIN code

when you turn on your handset. For more information on

the PIN code, refer to “Setting Security” on page 15-153.

1Enter the PIN code that you used for your old

mobile phone.

2Press B.

If your PIN code is entered incorrectly three

times in a row, the SIM card is locked.

To release the lock, try entering the PUK

(Personal Unblocking Key) code (8 digits)

provided by your service provider. For more

information on the code, contact your service

provider.

You can copy the “Contacts list” entries in your

previous SIM card. For information on copying the

“Contacts list” entries, refer to “Copying Entries

Between Memories” on page 9-61 or “Copying All

Entries from the SIM Card to the Handset

Memory” on page 9-62.

e_tm200_7fm.book Page 21 Tuesday, November 9, 2004 9:14 PM

4-22

Parts and Controls

Main Handset Unit

Before reading this operation manual, becoming familiar

with the names and locations of parts and controls is

recommended.

Also, in this section are icons and indications that change

in the display.

Camera Lens

Aerial

Speaker

External Display

Flash Light

Earpiece

Main Display

Left Soft Key

t-zones Key

Send Key

Voice Mail

Key G

*/Shift Key

Navigation

Keys

abcd

Centre Key

Right Soft Key

End/Power Ke

Key Pad

#/Silence profile

Key

Microphone/

MIC

Font Zoom Ke

Camera/Music

Key Y

0/Flash Light

Key Q

e_tm200_7fm.book Page 22 Tuesday, November 9, 2004 9:14 PM

4-23

Parts and Controls

Hands free EARphone & MIC

Connection

1Put the pad over the earphone. You can use the

hands free EARphone & MIC without the pads.

2Open the earphone connector cap and insert the

hands free EARphone & MIC plug into the

earphone connector.

For information on how to answer a call, refer to

“Answering a Call” on page 6-32.

Battery Cover

RF Connector

Side-up/Side-down Key V W

Earphone Connector

SD Memory Card Slot Cover

USB/Charger Connector

e_tm200_7fm.book Page 23 Tuesday, November 9, 2004 9:14 PM

4-24

Parts and Controls

Flip Functions When open:

the main display is turned on and the keypad lights up.

When closed:

the external display is turned on and lights up.

Java™ applications are suspended.

the handset sends the busy tone to the caller.

For information on how to set this function, refer to

“Settings for Flipping the Handset Closed” on

page 15-146.

calls are terminated.

For information on how to set this function, refer to

“Settings for Flipping the Handset Closed” on

page 15-146.

If closing the handset in “Create photo/video”

mode, all unsaved data will be lost.

e_tm200_7fm.book Page 24 Tuesday, November 9, 2004 9:14 PM

4-25

Parts and Controls

Display Indicators

Main Display

This section describes the status indicators displayed at

the top of the screen.

Status Indicators

1. / : Indicates the strength of the

received signal or that the service

is out of range.

2. : Indicates the battery level.

3. : Appears when in call.

4. / : Appears when a new SMS/MMS

message has arrived.

5. : Appears when your handset is

GPRS* enabled and within range.

Flashes during GPRS

transmission.

6. / : Appears when the WAP or MMS

message communication is in

CSD** or GPRS mode.

7. : Appears when the font zoom

function is active.

8. : Appears when the memory card is

inserted.

9. : Appears when at least one

unheard voice mail recording is

remaining.

10. / : Appears when a Java™ application

is executed (colour) or suspended

(B/W).

Status

indicators

e_tm200_7fm.book Page 25 Tuesday, November 9, 2004 9:14 PM

4-26

Parts and Controls

11. / : Appears when viewing secure

WAP*** browser.

12. : Appears when the USB cable

(supplied with the PC Link Kit) is

connected to your handset.

13. / : Appears when Bluetooth wireless

setting is enabled.

14. : Appears when “All calls” in the “Call

diverts” settings (page 15-147) is

set.

15. : Appears when your handset is

roaming outside of your network.

16. / / / / / :

Indicates the handset’s profiles:

T-Mobile/My profile/Conference/

Activity/In car/Silent (page 15-136)

17. : Appears when the “Outbox”

contains messages you failed to

send.

18. : Appears when “Ringing volume”

(page 15-136) is set to “Silent.”

19. : Appears when the alarm

(page 13-116) is set.

20. : Appears when vibration

(page 15-137) is set.

21. : Appears when the T9 text input

method is activated.

22. / / / :

Indicates the text input method:

First letter upper case mode/Upper

case mode/Lower case mode/

Numeric mode.

*GPRS: For information on the term, refer to

the page 15-162.

**CSD: For information on the term, refer to

the page 15-162.

***WAP: For information on the term, refer to

the page 15-162.

e_tm200_7fm.book Page 26 Tuesday, November 9, 2004 9:14 PM

4-27

Parts and Controls

External Display

Status Indicators

1. / : Indicates the strength of the

received signal or that the service

is out of range.

2. : Indicates the battery level.

3. / / / :

Appears when new messages are

received/the mailbox is full/

receiving messages/sending

messages.

4. : Appears when the handset is in

data connection mode.

5. : Appears when at least one

unheard voice mail recording is

remaining.

6. : Appears when the “Outbox”

contains messages you failed to

send.

7. : Appears when “Ringing volume”

(page 15-136) is set to “Silent.”

8. : Appears when “All calls” in the “Call

diverts” settings (page 15-147) is

set to “On.”

9. : Appears when the USB cable

(supplied with PC Link Kit) is

connected to your handset.

10. : Appears when the alarm

(page 13-116) is set.

11. : Appears when the memory card is

inserted.

Status

indicators

e_tm200_7fm.book Page 27 Tuesday, November 9, 2004 9:14 PM

5-28

Guide to the Main Menu

Using the Main Menu After turning on your handset, the standby screen

appears. If you wish to use any functions other than the

basic call operation, press B once to get the main menu.

This has 9 icons for functions, operations and settings.

When you reach the main menu, use a, b, c or d

(navigation keys) to navigate the cursor and press B to

select the function you wish to enjoy.

In this manual, the operation required to access

functions is described by the operation of the

navigation keys.

SAT/

Profiles

My Media

Call

qMessages r

t-zones

sContacts

tOrganiser uCamera vSettings

e_tm200_7fm.book Page 28 Tuesday, November 9, 2004 9:14 PM

5-29

Guide to the Main Menu

Basic Key Operations

Soft keys and the centre key

Your handset uses soft keys (C and A) to help navigate

the handset. At the bottom left and right side of the

display, the respective operations of the keys are shown.

The function of each soft key at any given time is

displayed at the bottom left and right of the screen.

The function of the centre key is displayed in the centre by

a graphical icon.

Example:

When A [Back] is displayed:

Press A [Back] to return to the previous menu.

When C [Select] is displayed:

Press C [Select] to select a menu item.

Navigation keys

a, b, c, d indicate the navigation keys.

When you navigate the cursor to select an item, press a,

b, c or d to highlight the item and press B.

The end/power key

Press F to return to the standby screen.

Camera/Music key

Press Y to enter the “Create photo” mode

(page 7-38).

Press and hold Y for approximately 2 seconds to

activate “My Music” (page 12-110).

Font Zoom key

Press h to change the display font size.

By pressing the key, the display font size switches.

To return to the previous menu, you can also

press c except when returning to the standby

screen.

To select an item in the menu, C [Select] can

be used instead of B. Also, d can be used to

select an item when e is displayed at the right

side of the display.

When selecting items using a or b,  and

 (scroll indicator) appear at the right edge of

the display in case there are more menus that

cannot be displayed at one time on the display.

h may not be supported by some functions.

e_tm200_7fm.book Page 29 Tuesday, November 9, 2004 9:14 PM

5-30

Guide to the Main Menu

List of Menu Function Items

This table shows you the items in the function level (1st

level), their respective menus (2nd level) and their page numbers.

Main Menu

(1st level)

Sub Menu

(2nd level) & Page No.

Profiles*

T-Mobile (page 15-136)

My profile (page 15-136)

Conference (page 15-136)

Activity (page 15-136)

In car (page 15-136)

Silent (page 15-136)

SIM Application**

My Media

Photos (page 12-86)

Pictures (page 12-86)

Sounds (page 12-96)

Games & more (page 12-106)

Videos (page 12-107)

Music (page 12-110)

Memory status (page 12-113)

Call Register

Missed calls (page 14-122)

Received calls (page 14-122)

Dialled numbers (page 14-122)

Call timers (page 14-125)

Call costs (page 14-125)

Data counter (page 14-127)

Main Menu

(1st level)

Sub Menu

(2nd level) & Page No.

Messages

Create message (page 11-69)

Inbox (page 11-74)

Drafts (page 11-74)

Sent (page 11-74)

Outbox (page 11-74)

Delete messages (page 11-78)

Settings (page 11-79)

Text templates (page 11-81)

Voice mail (page 11-82)

Memory status (page 11-83)

Cell Broadcasts (page 11-83)***

Cell info (page 11-85)

WAP Alerts (page 11-85)

t-zones (page 10-67)

Contacts Contacts list (page 9-54)

Speed dial list (page 9-65)

My numbers (page 9-66)

Organiser

Calendar (page 13-114)

Alarm (page 13-116)

Calculator (page 13-119)

Memo recording (page 13-120)

Phone help (page 13-121)

Camera Create photo (page 7-38)

Create video (page 7-42)

e_tm200_7fm.book Page 30 Tuesday, November 9, 2004 9:14 PM

5-31

Guide to the Main Menu

*If you insert a non SAT-compatible SIM card, the “SIM

Application” does not appear and “Profiles” appears

instead. For information on “Profiles” settings, refer to

“Setting the Profiles” on page 15-136.

** If you insert a SAT-compatible SIM card, the

information on the SIM card appears in the “SIM

Application” menu. For information on the SIM card,

contact your service provider.

***This menu may not be available depending on your

SIM card.

Settings

Phone settings (page 15-128)

Profiles (page 15-136)

Memory card (page 3-20)

Connectivity (page 15-143)

Java™

Date & Time (page 15-151)

Security (page 15-153)

Account settings (page 15-158)

Internet

Favourites settings (page 15-162)

Master reset (page 15-163)

Main Menu

(1st level)

Sub Menu

(2nd level) & Page No.

e_tm200_7fm.book Page 31 Tuesday, November 9, 2004 9:14 PM

6-32

Basic Handset Operations

This section describes basic phone call functions.

Confirm that the handset is on.

Making a Call

1Open the handset and enter a phone number

with the keypad.

2Confirm the number and press D.

Start talking when the connection is established.

If you enter a wrong number

Press A [Clear] to delete one digit. Press A [Clear] and

hold for approximately 2 seconds to delete the last line.

The handset returns to standby mode when all lines are

deleted.

Ending a Call

Press F to end the call.

Answering a Call

1The handset rings for an incoming call.

The handset vibrates when the vibration is set to

“Enable” or “Link to sound.” For information on the

vibration setting, refer to “Setting the Vibration” on

page 15-137.

2Press D or C [Answer].

The call is connected and “ ” appears.

When the Any Key Answer Function

is Activated

To answer a call, press any key except F or A [Busy].

For information on “Any Key Answer,” refer to “Setting

Any Key Answer” on page 15-142.

When the hands free EARphone &

MIC is connected

To answer a call, press and hold the button of the

hands free EARphone & MIC for approximately 2

seconds.

Closing the handset also ends a call. For

information on the other operations when handset

is closed, refer to “Settings for Flipping the

Handset Closed” on page 15-146.

e_tm200_7fm.book Page 32 Tuesday, November 9, 2004 9:14 PM

6-33

Basic Handset Operations

Rejecting an Incoming Call

You can reject a call you do not wish to answer.

1Press F while the handset is ringing.

Redialling

The handset keeps a record of phone numbers for the 10

most recent missed, received or dialled calls. You can

retrieve these phone numbers to make calls.

1Press D while the handset is in standby mode.

2Press c or d to highlight a category from

“Missed calls,” “Received calls” and “Dialled

numbers.”

3Press a or b to highlight the number you wish

to call.

4Press D to redial the call.

Setting Automatic Redialling

This function makes the handset redial automatically

when the first redial attempt is unsuccessful. For

information on “Auto redial,” refer to “Activating Auto

Redial” on page 15-145.

When the Hands free EARphone & MIC is

connected to the handset and the “Any Key

Answer” function is set to “On,” you can answer

calls by pressing the V or W key.

When the handset is connected to Bluetooth

headset and “Automatic answer” is set to “On,”

the handset automatically connects the call after

the specified time and you can talk to the caller.

For information on “Automatic answer,” refer to

“Setting the Automatic Answer” on page 15-142.

When the handset is not connected to the hands

free EARphone & MIC, press

to activate

hands free function.

If your subscription includes the CLI (Calling Line

Identification) service, the caller’s number appears

on the screen. If the caller’s name and number are

stored in the “Contacts list,” the caller’s name and

phone number appear on the screen.

When receiving a call from a person whose picture

is registered in the “Contacts list,” the receiving

display and the picture appear alternately. For

more information on the “Contacts list” refer to

“Using the Contacts List” on page 9-54.

If the number is a restricted number, “withheld”

appears.

You can also reject an incoming call by closing the

handset.

e_tm200_7fm.book Page 33 Tuesday, November 9, 2004 9:14 PM

6-34

Basic Handset Operations

Useful Functions

Speed Dialling

Up to 9 phone numbers from the “Contacts list” memory

(Handset and SIM) can be assigned to speed dials. You

can call the numbers using the digit keys. For information

on the “Speed dial list,” refer to “Setting the Speed Dial

List” on page 9-65.

1To dial a number using speed dial, press and

hold any of the digit keys (H to O and Q)

for approximately 2 seconds.

The phone number stored in the “Speed dial list” is

dialled.

Call Waiting

This service enables you to talk to a third party while you

are in the middle of another call. After activating this

service, a beep tone notifies you of the second call.

To activate this service, refer to “Activating the Call

Waiting Service” on page 15-143.

1During a call, press C [Options].

The “Options” menu appears.

2Press a or b to highlight “Hold & Answer” and

press B.

The second party is put on hold and you can talk to

the third party.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Swap calls” and

press B.

You can switch between the two calls.

5Press C [Options].

The “Options” menu appears.

6Press a or b to highlight “Release call” and

press B.

The current call ends and return to the held call.

G cannot be used as speed dial because it is

already assigned to “Voice mail.”

The call waiting service may not be available

on all networks. Contact your service provider

for more information.

If you do not wish to answer the second call,

press C [Options] and press a or b to

highlight “Busy,” then press B in step 2.

e_tm200_7fm.book Page 34 Tuesday, November 9, 2004 9:14 PM

6-35

Basic Handset Operations

Accessing the SMS Menu During a

Call

1During a call, press C [Options].

The “Options” screen appears.

2Press a or b to highlight “SMS” and press B.

3Press a or b to highlight one of following

options.

Selecting “Create message”:

allows you to create an SMS message.

Selecting “Inbox,” “Sent” or “Drafts”:

allows you to access these folders. For more

information on the SMS message, refer to “Using

the Message Service” on page 11-68.

Conference Call

This service enables you to call 2 people or more at the

same time. You can talk with 5 participants at most with

this service. To make a conference call, you must have

one active call and one held call.

1With one active call and one held call, press C

[Options].

The “Options” menu appears.

2Press a or b to highlight “Multiparty” and press

3Press a or b to highlight “Conference all” and

press B to initiate the conference call.

You can talk with all the people on the line.

4Press F to end the conference call.

The conference call ends.

e_tm200_7fm.book Page 35 Tuesday, November 9, 2004 9:14 PM

6-36

Basic Handset Operations

To add new participants to the conference call

1During the call, press C [Options] and select

“Dial.”

2Enter the phone number you wish to include in

the conference call.

3Press D.

After the call is connected, continue from step 1 of

“Conference Call” (page 6-35).

If you wish to include other participants in the

conference call, perform the process again.

To put all the participants on hold

1During the call, press C [Options] and select in

the following order:

“Multiparty” →“Conference all.”

2Press a or b to highlight “Conference hold all”

and press B.

To reject adding participants

1During the call, press C [Options].

The “Options” menu appears.

2Press a or b to highlight “Busy” to send the

busy tone and press B.

To put the current call on hold and continue

having a conference call with the remaining

participants

1During the call, press C [Options] and select in

the following order:

“Multiparty” →“Conference all.”

2Press a or b to highlight “Exclude” and press

To end the call with all participants

1During the call, press C [Options] and select in

the following order:

“Multiparty” →“Conference all.”

2Press a or b to highlight “Release all” and

press B.

To end the call with a conference call

participant

1During a conference call, press a or b to

highlight the person that you wish to disconnect

from the conference call.

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Release call” and

press B.

e_tm200_7fm.book Page 36 Tuesday, November 9, 2004 9:14 PM

6-37

Basic Handset Operations

To have a conversation with participants

privately

When you wish to have a conversation with one of the

participants privately, you can select a person from the

conference list and put others on hold.

1During a conference call, press a or b to

highlight the person that you wish to talk in

private with.

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Multiparty” and press

4Press a or b to highlight “Private” and press

5When you have finished the private

conversation, continue from step 1 of

“Conference Call” (page 6-35).

The conference call service may not be available

on all networks. Contact your service provider for

more information.

e_tm200_7fm.book Page 37 Tuesday, November 9, 2004 9:14 PM

7-38

Using the Camera

This handset features a built-in camera capable of taking

two million dots high-quality pictures. The camera lets you

take pictures or video clips and features a digital zoom

and auto focus functions. Once you’ve taken your picture

or video, you can save it, then send it to others via MMS

or E-mail message.

Taking Pictures

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Camera” and

press B.

3Press a or b to highlight “Create photo” and

press B.

The camera image appears in the display.

4Hold the camera as illustrated below.

By pressing Camera/Music key (page 4-22),

you can enter the “Create photo” mode directly.

In this case, start the operation from step 4.

If you use the memory card (page 3-18), you

can select a memory (handset memory or

memory card) before taking pictures. For

information on how to select a memory, refer to

“Selecting the Memory” on page 7-45.

In “Create photo” mode, certain functions will be

available only when the picture size is set to

“Small” or “Tiny.” For information on how to set the

picture size in “Create photo” mode, refer to

“Selecting the Picture Size” on page 7-39.

e_tm200_7fm.book Page 38 Tuesday, November 9, 2004 9:14 PM

7-39

Using the Camera

5Press B.

The shutter sound is heard and the shot picture

appears.

6Press W to save the picture.

The picture is saved to “My photos.”

Press A [Cancel] in this step. You can take the

picture again.

If you wish to send the taken picture, refer to

“Shooting and Sending a Picture/Video Function” on

page 7-48.

Selecting the Picture Size

Pictures are saved in JPEG format in the following six

sizes.

2 M pixel: 1224 × 1632 dots

1 M pixel: 858 × 1144 dots

Large: 768 × 1024 dots

Medium: 480 × 640 dots

Small: 240 × 320 dots

Tiny: 120 × 160 dots

1At the main menu, select in the following order:

“Camera” → “Create photo.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Photo size” and

press B.

4Press a or b to highlight the picture size you

wish to select and press B.

Selecting the Picture Quality

1At the main menu, select in the following order:

“Camera” → “Create photo.”

2Press C [Options].

The “Options” menu appears.

If you wish to leave “Create photo” mode

without saving the

taken picture, press F

before step 6.

While in “Create photo” mode, you can switch

to “Create video” mode. Press C [Options] to

display “Options” menu and select “Change to

video mode,” then press B.

This handset uses a CCD sensor. Although this

handset has been manufactured carefully, some

pictures may still appear too bright or too dark.

If the handset has been left in a warm place for

a long time before taking or registering a

picture, the picture quality may be poor.

Pictures taken with the camera may differ from

the actual image of the subject in colour and

brightness.

e_tm200_7fm.book Page 39 Tuesday, November 9, 2004 9:14 PM

7-40

Using the Camera

3Press a or b to highlight “Photo quality” and

press B.

4Press a or b to highlight “Normal” or “Fine”

and press B.

Adjusting the Brightness of the

Picture

1At the main menu, select in the following order:

“Camera” → “Create photo.”

2Press a (brighter) or b (darker) to adjust the

brightness (exposure level) of the picture.

Selecting the Shutter Sound

You can select the shutter sound from three preset

patterns.

1At the main menu, select in the following order:

“Camera” → “Create photo.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Shutter sound” and

press B.

4Press a or b to highlight the sound you wish to

select and press B.

You can select from “Pattern 1,” “Pattern 2” or

“Pattern 3.”

To play back the shutter sound, press C [Play].

Viewing the Saved Pictures

You can review the pictures saved in “My photos.”

1At the main menu, select in the following order:

“Camera” → “Create photo.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “My photos” and

press B.

The thumbnail index for saved pictures appears.

4Press a, b, c or d to select the image you

wish to view and press B.

The selected picture appears.

Return to the standby mode to reset the

brightness setting to default.

When you save pictures, the assigned file

names are “YMMDDnnn.jpg” (YMMDD is

Y (Year), M (Month), D (Day) and nnn is a 3

digit number).

You can view the file name and size of your

pictures in the thumbnail index.

e_tm200_7fm.book Page 40 Tuesday, November 9, 2004 9:14 PM

7-41

Using the Camera

Selecting the Frame

You can select and set a frame from preset patterns or

saved pictures.

1At the main menu, select in the following order:

“Camera” → “Create photo.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Add frame” and

press B.

4Press a or b to highlight “Preset frames” or

“Off” and press B.

If you do not wish to add a frame, select “Off.”

5Press a, b, c or d to select the frame you

wish to view and press B.

Using Continuous Shooting

Four pictures are taken in succession. Auto shooting and

manual shooting are available.

1At the main menu, select in the following order:

“Camera” → “Create photo.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Continuous

shooting” and press B.

4Press a or b to highlight “Auto shooting” or

“Manual shooting” and press B.

“Auto shooting”: Four pictures are taken in a row

by pressing B.

“Manual shooting”:

Pictures are taken one by one

by pressing B.

To cancel continuous shooting, select “Off” in this

step.

5Press B to start continuous shooting.

When the continuous shooting is finished, the

pictures taken are saved automatically.

To end the function, press A [Cancel].

You can only select a frame when the picture

size is set to “Small” or “Tiny.”

If you activate “Continuous shooting,” you

cannot set a frame.

You can only use the continuous shooting

function when the picture size is set to “Small”

or “Tiny.”

If you select a frame when taking pictures, you

cannot use the continuous shooting function.

e_tm200_7fm.book Page 41 Tuesday, November 9, 2004 9:14 PM

7-42

Using the Camera

Shooting Video Images

You can record video clips with sound.

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Camera” and

press B.

3Press a or b to highlight “Create video” and

press B.

The video image appears in the display.

4Hold the camera as illustrated below.

5Press B.

The sound indicating the start of video recording is

heard and the recording starts.

If you press B again, the recording stops and the

sound indicating the end of video recording is heard.

If you use the memory card (page 3-18), you can

select a memory (handset memory or memory

card) before recording video clips. For information

how to select a memory, refer to “Selecting the

Memory” on page 7-45.

e_tm200_7fm.book Page 42 Tuesday, November 9, 2004 9:14 PM

7-43

Using the Camera

6Press C [Options] and select “Save” and press

B to save the recorded video clip to “My videos.”

If you wish to send saved video clips, refer to

“Sending Videos as Attachments” on page 12-108.

If you wish to send the video clip, refer to “Shooting

and Sending a Picture/Video Function” on

page 7-48.

Selecting Video Size

1At the main menu, select in the following order:

“Camera” → “Create video.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Video size” and

press B.

4Press a or b to highlight “Large” or “Small” and

press B.

Selecting Video Quality

1At the main menu, select in the following order:

“Camera” → “Create video.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Video quality” and

press B.

4Press a or b to highlight “Normal” or “Fine”

and press B.

Adjusting the Brightness of Video

Clips

In “Create video” mode, press a (brighter) or b (darker)

to adjust the brightness (exposure level) of video clips.

While in “Create video” mode, you can switch

to “Create photo” mode. Press C [Options] to

display “Options” menu, select “Change to

camera mode,” then press B.

If you wish to record video clips without sound,

press C [Options], select “Voice record” and

set it “Off.”

The maximum size of a video clip that can be

recorded at one time is 295 kbytes.

Return to the standby mode to reset the

brightness setting to default.

e_tm200_7fm.book Page 43 Tuesday, November 9, 2004 9:14 PM

7-44

Using the Camera

Viewing Saved Video Clips

You can view saved video clips in “My videos.”

1At the main menu, select in the following order:

“Camera” → “Create video.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “My videos” and

press B.

The thumbnail index for saved video clips appears.

4Press a, b, c or d to select the video clip

you wish to playback and press B.

5Press B.

The selected video clip is played back.

To pause playback, press B.

To resume playback, press B again.

To stop playback, press A [Back].

6After you have viewed the video clip, press

A[Back].

The display returns to the thumbnail index.

When you save video clips, the assigned file

names are “YMMDDnnn.3gp” (YMMDD is

Y (Year), M (Month), D (Day) and nnn is a 3

digit number).

The file name and size of your pictures are

displayed in the thumbnail index.

If the video clip has been recorded with sound,

the volume can be adjusted by pressing a or

The volume depends on the “Ringing Volume”

setting (page 15-136). The volume is 0 when

“Ringing Volume” is set to “Silent” or “Step

Tone.”

e_tm200_7fm.book Page 44 Tuesday, November 9, 2004 9:14 PM

7-45

Using the Camera

Common Functions &

Information

This section describes useful common functions you can

use for both camera and video.

Selecting the Memory

If you use the memory card (page 3-18), you can select a

memory (handset memory or memory card) before taking

pictures or recording videos for the data storage.

7At the main menu, select in the following order:

“Camera” → “Create photo” or “Create video.”

8Press C [Options].

The “Options” menu appears.

9Press a or b to highlight “Save to” and press

10 Press a or b to highlight “Handset” or

“Memory card” and press B.

Selecting Focus Mode

You can select a focus mode from the following three

alternatives.

1At the main menu, select in the following order:

“Camera” → “Create photo” or “Create video.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Focus mode” and

press B.

4Press a or b to highlight “Autofocus,”

“Semi-autofocus” or “Manual focus” and press

Autofocus: Focus automatically by pressing

Semi-autofocus: Once

B is pressed, the focal

length will be fixed. Press B

again to take the picture with

fixed focus.

Manual focus: By pressing

V/W, focal length

can be changed. Press B to

take the picture with the focus

set manually.

Once you set “Semi-autofocus” in step 4, make

sure that you have to press B twice to take a

picture.

e_tm200_7fm.book Page 45 Tuesday, November 9, 2004 9:14 PM

7-46

Using the Camera

Using the Digital Zoom Function

1At the main menu, select in the following order:

“Camera” → “Create photo” or “Create video.”

2Press d to zoom in (the subject becomes

larger) or press c to zoom out (the subject

becomes smaller.)

The zooming ratio indicators appear automatically

when c or d is pressed and disappear when the

key is released.

The available zooming steps depend on the camera

settings.

Using the Delay Timer

1At the main menu, select in the following order:

“Camera” → “Create photo” or “Create video.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Delay timer” and

press B.

4Press a or b to highlight “On” and press B.

“ ” appears and returns to “Create photo/video”

mode.

5Press B to start the delay timer.

10 seconds after the timer starts, the shutter sounds

and the camera takes a picture or starts recording

video.

To cancel the delay timer

1Press C [Options] while the delay timer setting

is on.

The “Options” menu appears.

2Press a or b to highlight “Delay timer” and

press B.

3Press a or b to highlight “Off” and press B.

The delay timer turns off.

The digital zoom function is not available when

picture size is set to “2 M pixel” in “Create photo”

mode.

If B is pressed while the delay timer is

operating, the picture is taken immediately.

If you wish to stop taking pictures with the

timer, press A [Cancel] while the delay timer

is operating.

e_tm200_7fm.book Page 46 Tuesday, November 9, 2004 9:14 PM

7-47

Using the Camera

Using the Flash Light

When taking a picture or recording video in a dark place,

you can use the Flash light.

1At the main menu, select in the following order:

“Camera” → “Create photo” or “Create video.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Flash light” and

press B.

4Press a or b to highlight “On” or “Off” and

press B.

Changing the View Finder

You can use the external display as the view finder. This

function is convenient for taking a self-portrait or a group

picture.

1At the main menu, select in the following order:

“Camera” → “Create photo” or “Create video.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Change viewfinder”

and press B.

The main display is turned off and the image

through the camera lens appears in the external

display and focus mode is set to “Autofocus.”

When taking a picture or stopping a video recording,

the view finder automatically switches to the main

display.

Pressing Q also activates the Flash light.

You can also change the view finder by pressing

P (X) in “Create photo/video” mode.

e_tm200_7fm.book Page 47 Tuesday, November 9, 2004 9:14 PM

7-48

Using the Camera

Shooting and Sending a Picture/Video

Function

After taking a picture or recording video, you can send it

directly from “Create photo/video” mode via MMS or

E-mail message.

1After taking a picture or recording video, press

The “Send to” list appears.

When recording a video clip, options appear when

pressing B to stop recording.

The last address where a message was sent is at

the top of the list.

2Press a or b to highlight the phone number or

E-mail address of the recipient.

If you cannot find the phone number or E-mail

address that you wish to send the picture to, select

“Others…” and enter the necessary information.

3Press B.

Press a or b to highlight “Send” and press B.

The message is sent.

Deleting Photo/Video Clips

For information on how to delete photos or video clips,

refer to page 12-96 for deleting photos and page 12-109

for deleting video clips.

When the Memory Space is Low

When the available memory space in “My photos/My

videos” is low, the remaining shots indicator in the upper

left of the screen turns red. If the memory space becomes

zero and when you try to take a photos again, “Memory

full. You cannot take a picture!” (“Memory full. You cannot

record a video!” in the “Create video” mode) appears.

When attaching a photo/picture file to a message,

the size of the file is automatically reduced if

exceeding the maximum (295 kbytes) size to

send.

You can also send a voice memo after recording.

For information on the voice memos, refer to

“Using Memo Recording” on page 13-120.

e_tm200_7fm.book Page 48 Tuesday, November 9, 2004 9:14 PM

7-49

Using the Camera

Create Photo/Video Mode

Indicators

Flash light indicator (page 7-47)

:On

Delay timer indicator (page 7-46)

: Indicates the delay timer is set.

Continuous shooting indicators (for the “Create photo”

mode only) (page 7-41)

: Indicates pictures are taken in

continuous shooting mode.

photo/video quality indicators (page 7-39, page 7-43)

Indicates the quality of the picture or video to be

recorded.

: Normal

:Fine

Photo size indicators (for “Create photo” mode only)

(page 7-39)

2 M pixel: 1224 × 1632 dots

1 M pixel: 858 × 1144 dots

Large: 768 × 1024 dots

Medium: 480 × 640 dots

Small: 240 × 320 dots

Tiny: 120 × 160 dots

Focus mode indicators (page 7-45)

: Autofocus

: Semi-autofocus

: Manual focus

Focusing bar

Photo/video brightness (exposure level) indicators

(page 7-40, page 7-43)

(+2): Bright

(+1): ↓

(±0): Normal

(-1): ↓

(-2): Dark

Remaining shots/Sets indicator

: Indicates that the remaining number

of pictures is still over 1000.

123: Indicates the remaining number of

photos or video clips that can be

taken or recorded.

Short distance

Focus

Long distance

e_tm200_7fm.book Page 49 Tuesday, November 9, 2004 9:14 PM

7-50

Using the Camera

Memory indicators (page 7-45)

: Indicates photos/videos are saved

on handset memory.

: Indicates photos/videos are saved

on memory card.

Zooming ratio indicators (page 7-46)

Voice record indicators (for “Create video” mode only)

(page 7-43)

:On

:Off

Original size Maximum size

Magnification

e_tm200_7fm.book Page 50 Tuesday, November 9, 2004 9:14 PM

8-51

Entering Text

This section provides information on how to enter text

using the handset keypad for contacts list entries and

messages, etc. Before you try to enter text, you should

familiarise yourself with the different text input methods.

In multi-tap input method, several characters are

assigned to each key and you enter the desired character

by pressing the key a few times.

Text Table for Multi-tap Input

The table indicates how many times you need to press a

certain key to display the character you wish to enter.

Pressing the key changes the character in order as shown

in the table. When you reach the last character, it returns

to the first one.

Example: Press H once. “A” appears. Press twice. “B”

appears.

English Mode

Q-O: Press and hold to enter numbers 0-9.

P: Press and hold to shift to sentence mode,

Upper case, Lower case or Numeric (Abc,

ABC, abc or 123).

R: Press and hold to shift between multi-tap and

T9 mode.

Key Upper Case

Characters

Lower Case

Characters

Numeric

G. (full stop) , (comma) - (hyphen) ? !

’ (apostrophe) @ :1 1

HABC2 abc2 2

IDEF3 def3 3

JGHI4 ghi4 4

KJKL5 jkl5 5

LMNO6 mno6 6

MPQRS7 pqrs7 7

NTUV8 tuv8 8

OWXYZ9 wxyz9 9

Q(space) + = < > € £ $ ¥ % & 0 0

P* + P?

.,?!:;-+#*

@' '' ( ) _ & € £ $

% / < > § = \ | ¥

¿¡ ^ [ ] { } ¤ Å Ä

Æ å ä æ à Ç É è é ì

Ñ ñ Ö Ø ö ø ò ß Ü ü

ù ∆ Φ Γ Λ Ω Π Ψ ∑ Θ

Ξ (space) (return)

Key Upper Case

Characters

Lower Case

Characters

Numeric

e_tm200_7fm.book Page 51 Tuesday, November 9, 2004 9:14 PM

8-52

Entering Text

Selecting the Input Method

T9 Text Input

T9 text input method is a shortcut to enter text easily and

quickly.

1In the text entry screen, press C [Options].

The “Options” menu appears.

2Press a or b to highlight “Input method” and

press B.

3Press a or b to highlight the T9 mode (T9

Abc,T9 ABC, T9 abc) you wish to select and

press B.

“ ” appears at the top of the display.

4Press each key once for any letter on that key.

Example: To enter the word “How,” press J L

5If the word shown isn’t the one you want, press

a or b and highlight the correct one.

6Press B to select the word.

Entering Symbols and Punctuation

To enter symbols or punctuation, press R.

Selecting the Input Language

You can select the input language in the text entry screen.

1In the text entry screen, press C [Options].

The “Options” menu appears.

2Press a or b to highlight “Input language” and

press B.

3Press a or b to highlight the language you

wish to select and press B.

If the correct word is not shown in step 5, enter the

correct word again after switching to the multi-tap

input method.

If you press Q instead of step 6, a space is

inserted next to the selected word.

e_tm200_7fm.book Page 52 Tuesday, November 9, 2004 9:14 PM

8-53

Entering Text

Using Text Templates

You can use the sentences registered in “Text templates”

when entering text. For information on how to create the

text templates, refer to “Saving Phrases to the Text

Template” on page 11-81.

1In the text entry screen, press a, b, c or d

to move the cursor to the point you wish to insert

the template.

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Text template” and

press B.

4Press a or b to highlight the text template you

wish to select and press B.

The selected text template is inserted.

Copying, Cutting and Pasting

Text

The options help you complete editing smoothly.

Copying and Cutting

1When you are editing text, press C [Options].

The “Options” menu appears.

2Press a or b to highlight “Copy” or “Cut” and

press B.

3Press a, b, c or d to move the cursor to the

first letter to be copied or cut and press B.

4Press a, b, c or d to move the cursor to the

last letter to be copied or cut and press B.

Pasting

1After the “Copy” and “Cut” operation, press a,

b, c or d to move the cursor to the point you

wish to insert the letters and press C [Options].

The “Options” menu appears.

2Press a or b to highlight “Paste” and press B.

“Cut” removes the information from its original

location and relocates it when you use “Paste.”

“Copy” leaves the information in its original

location and makes another copy of the

information when you use “Paste.”

e_tm200_7fm.book Page 53 Tuesday, November 9, 2004 9:14 PM

9-54

Using the Contacts List

In the “Contacts list,” you can store the phone numbers

and E-mail addresses of your friends, family and

colleagues, etc. Using “Contacts list,” you can dial or send

messages easily without entering a phone number or an

E-mail address manually.

Contacts List Basics

In the “Contacts list,” you can store up to 500 phone

numbers and E-mail addresses. In each entry, you can

store the following items.

Items stored in the handset memory

Name: Up to 30 characters

Phone number: Up to 40 digits, 3 phone numbers /

entry

E-mail Address: Up to 60 characters, 2 addresses /

entry

Group: Selectable from 8 groups

Address: Up to 100 characters

Note: Up to 60 characters

Thumbnail image: 1 image

Items stored in the SIM memory

Name: The number of characters that can

be stored differs depending on the

SIM card you use.

Phone number: Up to 40 digits

Viewing the Contacts List

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Contacts”

and press B.

3Press a or b to highlight “Contacts list” and

press B.

The index view of the “Contacts list” appears.

The capacity of the “Contacts list” differs when

storing in your handset memory and when storing

in the SIM card. For example, you cannot store a

thumbnail image in the “Contacts list” in the SIM

card.

You can also access the “Contacts list” by

pressing b while in standby mode.

The “Contacts list” stored in the handset is empty

when you purchase the handset.

e_tm200_7fm.book Page 54 Tuesday, November 9, 2004 9:14 PM

9-55

Using the Contacts List

Selecting the Memory

You can store new entries in the “Contacts list.” Before

saving new entries or viewing stored entries in the

“Contacts list,” you can select the handset memory or the

SIM card memory.

Selecting the Memory for saving

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Advanced” and

press B.

4Press a or b to highlight “Save to” and press

5Press a or b to highlight “Handset,”

“Selection” or “SIM” and press B.

If you select “Selection,” you can select the memory

(handset or SIM card) each time a new entry is

saved. For information on how to select the memory

when saving a new entry, refer to “Saving

Information to the Contacts List” on page 9-56.

Selecting the Memory for viewing

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Advanced” and

press B.

4Press a or b to highlight “Source” and press

5Press a or b to highlight “Handset,” “SIM” or

“SIM + Handset” and press B.

e_tm200_7fm.book Page 55 Tuesday, November 9, 2004 9:14 PM

9-56

Using the Contacts List

Saving Information to the

Contacts List

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Add new contact”

and press B.

The “New Entry” screen appears.

If you select “Selection” in step 5 of “Selecting the

Memory for saving” (page 9-55), specify the

memory (Handset or SIM) each time before making

an entry.

When selecting “Handset entry”:

Items you can enter are “Name,” “Phone 1,” “Phone

2,” “Phone 3,” “E-mail 1,” “E-mail 2,” “Group,”

“Address” and “Note.”

When selecting “SIM entry”:

Items you can enter are only “Name” and “Phone.”

4Press a or b to highlight the item you wish to

enter and press B.

The entry screen appears. For information on how

to enter text, refer to “Entering Text” on page 8-51.

5When you finish entering the information, press

A [Save].

Adding a Phone Number from Call

You can enter the phone numbers and names of the caller

in the “Contacts list” from “Call Register” logs such as

“Missed calls,” “Received calls” or “Dialled numbers.”

1Display the “Call Register” log you wish to select

from.

For information on “Call Registers,” refer to “Using

the Call History” on page 14-122.

2Press a or b to highlight the number you wish

to save in the “Contacts list” and press C

[Options].

The “Options” menu appears.

3Press a or b to highlight “Save to Contacts”

and press B.

4Follow the steps from step 3 of “Saving

Information to the Contacts List” to complete the

operation.

For information on items or the number of the

characters you can enter in the handset or SIM

card memory, refer to “Contacts List Basics” on

page 9-54.

e_tm200_7fm.book Page 56 Tuesday, November 9, 2004 9:14 PM

9-57

Using the Contacts List

Saving an Input Phone Number to the

Contacts List

1After you enter the phone number in standby

mode, press C [Save].

2Follow the steps from step 3 of “Saving

Information to the Contacts List” (page 9-56) to

complete the operation.

Dialling from the Contacts List

When dialling from the “Contacts list,” display the index

view of the “Contacts list” first.

Dialling from the Contacts List

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press a or b to highlight the name you wish to

call and press D to dial.

If there are two or more entries registered in the

selected entry, press a or b to highlight the phone

number you wish to call and press D.

If no entries are found in the list, you can create an

entry from the list. Press C [Options] and follow

step 3 onward of “Saving Information to the

Contacts List” (page 9-56).

Dialling from the Details Screen

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press a or b to highlight the name which

contains the phone number you wish to dial and

press B.

The detail screen appears.

3Press a or b to highlight the phone number

you wish to dial and press D to dial.

If you cannot find the name you wish to dial or

send messages to, follow the steps in “Searching

a Name and Number in the Contacts List”

(page 9-58).

e_tm200_7fm.book Page 57 Tuesday, November 9, 2004 9:14 PM

9-58

Using the Contacts List

Sending Messages from the Details

Screen

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press a or b to highlight the name you wish to

call and press B.

The detail screen appears.

3Press a or b to highlight the phone number or

E-mail address of the recipient you wish to send

a message to.

4Press C [Options].

The “Options” menu appears.

5Press a or b to highlight “Send message” and

press B.

6Press a or b to highlight “via SMS,” “via MMS”

or “via E-mail” and press B.

Searching a Name and Number in the

Contacts List

If you cannot find the name or number you wish to call at

a glance in index view, you can search for it by entering

the first few characters.

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Search” and press

4Enter the first few characters of the name you

wish to call.

Matched results appear in alphabetical order. If

there is no exact entry in the “Contacts list,” the

similar names appear alphabetically.

5Press a or b to scroll through the list for

selecting the name you wish to call and press B.

The detail screen of the “Contacts list” appears.

You can also dial by pressing D when the name

you wish to call is highlighted in step 4.

e_tm200_7fm.book Page 58 Tuesday, November 9, 2004 9:14 PM

9-59

Using the Contacts List

Editing the Contacts List

Editing a Contacts List Entry

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press a or b to highlight the name you wish to

edit.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Edit” and press B.

The “Edit Entry” screen appears.

5Press a or b to highlight the item you wish to

edit and press B.

6When you have finished editing, press B.

If you wish to edit another item, repeat steps 5 and

7Press A [Save].

The changes are saved.

If you do not wish to save the changes, press C

[Options] before step 7 and press a or b to

highlight “Cancel,” then press B.

Adding a Thumbnail Image to Entries

(for the handset entry only)

You can add a thumbnail image to entries in the handset

memory.

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press a or b to highlight the entry you wish to

add a thumbnail image to and press B.

The detail screen appears.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Caller ID” and press

5Press a or b to highlight “My photos” or “My

pictures” and press B.

The thumbnail list you selected appears.

If you cannot find the name you wish to edit, follow

the steps in “Searching a Name and Number in the

Contacts List” (page 9-58).

e_tm200_7fm.book Page 59 Tuesday, November 9, 2004 9:14 PM

9-60

Using the Contacts List

6Press a, b, c or d to highlight a thumbnail

image you wish to add and press B.

7Press A [Save] to add a thumbnail image to the

entry.

To change the thumbnail image in the

“Contacts list” entry

Select “Change” after step 4 and select “My photos” or

“My pictures.”

To remove the thumbnail image in the

“Contacts list” entry

Select “Remove” after step 4.

Setting the Ringtone for a Contacts

List Entry (for the handset entry

only)

You can set a ringtone or the vibration to a “Contacts list”

entry in the handset memory.

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press a or b to highlight the name you wish to

set and press B

The detail screen appears.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Ringtone” and press

5Press a or b to highlight “On” and press B.

If you wish to cancel the ringtone setting, select “Off”

in this step.

6Press a or b to highlight “Assign melody” and

press B.

7Press a or b to highlight “My sounds,” “My

music” or “T-Mobile” and press B.

The files in “T-Mobile” are preset data.

Picture up to 150 kbytes can be added to

entries as a thumbnail image.

You cannot add thumbnail images to entries in

the SIM Memory.

The “Options” menu items “Change” and

“Remove” appear only when a thumbnail image is

added to the selected entry.

If you delete an image added as a thumbnail in

“My photos” or “My pictures,” the corresponding

thumbnail image is also removed.

e_tm200_7fm.book Page 60 Tuesday, November 9, 2004 9:14 PM

9-61

Using the Contacts List

8Press a or b to highlight the ringtone you wish

to set and press C [Select].

For more information on how to select a ringtone,

refer to “Setting a Melody as the Ringtone” on

page 15-137.

9Press a or b to highlight “Vibration” and press

10 Press a or b to highlight “Enable,” “Disable” or

“Link to sound” and press B.

For information on how to set the vibration, refer to

“Setting the Vibration” on page 15-137.

11 When setting is complete, press A [Back] and

A [Save].

Copying Entries Between Memories

You can copy entries between the handset and SIM card

memories. This function is useful when you wish to

backup entries or organise your memory space. Before

copying, make sure which memory’s entries are displayed

on the display.

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press a or b to highlight the name which you

wish to copy to another memory.

3Press B to display the detail screen and press

a or b to highlight the phone number you wish

to copy.

4Press C [Options].

The “Options” menu appears.

5Press a or b to highlight “Copy to SIM” to copy

the entry to the SIM card or “Copy to handset” to

copy the entry to the handset memory and press

The name and the phone number selected in step 2

are copied to the other memory.

If you select “Copy to SIM,” the message “Some

data may be lost. OK?” appears. Press C [Yes] to

complete the operation.

Even if multiple phone numbers are registered to

one name, you can copy only one phone number

per name to the SIM card.

e_tm200_7fm.book Page 61 Tuesday, November 9, 2004 9:14 PM

9-62

Using the Contacts List

Copying All Entries from the SIM

Card to the Handset Memory

You can copy all entries from the SIM card to the handset

memory at once. This function is useful when you restore

the handset memory with the backup copy in the SIM Card.

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Advanced” and

press B.

4Press a or b to highlight “Copy all from SIM”

and press B.

5Press C [Yes].

If you wish to cancel, press A [No] in this step.

Swapping the Location Number of the

Phone Number (for SIM card entries

only)

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press a or b to highlight the desired name and

press B.

3Press a or b to highlight the desired phone

number and press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Swap” and press B.

5Enter the location number you wish to swap and

press B.

Deleting a Contacts List Entry

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press a or b to highlight the name you wish to

delete.

If you cannot find the desired name, follow the

steps in “Searching a Name and Number in the

Contacts List” (page 9-58).

e_tm200_7fm.book Page 62 Tuesday, November 9, 2004 9:14 PM

9-63

Using the Contacts List

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Delete” and press

5Press C [Yes].

If you wish to cancel, press A [No] in this step.

Deleting All Contacts List Entries

You can delete all entries in the “Contacts list.” Before

deleting all “Contacts list” entries, ensure that you are

accessing the memory you wish to delete. For information

on how to select the memory for “Contacts list” entries,

refer to “Selecting the Memory” on page 9-55.

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Advanced” and

press B.

4Press a or b to highlight “Delete all entries”

and press B.

5Enter your handset code and press B.

For information on the handset code, refer to

“Enabling the Handset Lock” on page 15-154.

6Press a or b to highlight “Handset entries” or

“SIM entries” and press B.

7Press C [Yes].

If you wish to cancel, press A [No] in this step.

Setting the Groups

You can set group icons when saving the “Contacts list”

entries to the handset memory so that you can easily find

and edit them.

Viewing Groups

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Group” and press B.

4Press a or b to highlight “View groups” and

press B.

Once you delete a “Contacts list” entry, it cannot

be restored. Once you delete all entries in the “Contacts list,”

they cannot be restored.

e_tm200_7fm.book Page 63 Tuesday, November 9, 2004 9:14 PM

9-64

Using the Contacts List

5Press a or b to highlight the group name you

wish to hide/view and press B.

The check box indicates that the group has been

selected.

Group Call

You can set different ringtones for each group. When you

purchase this handset, groups are set to off. If you do not

set a group ringtone, the ringtone assigned in “Profiles” is

used. For information on “Profiles,” refer to “Setting the

Profiles” on page 15-136.

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Group” and press B.

4Press a or b to highlight “Group call” and

press B.

5Press a or b to highlight the group name you

wish to set and press B.

6Press a or b to highlight “On” and press B.

If you wish to cancel the ringtone setting, select “Off”

in this step.

7Press a or b to highlight “Assign melody” and

press B.

8Press a or b to highlight “My sounds,” “My

music” or “T-Mobile” and press B.

The files in “T-Mobile” are preset data.

9Press a or b to highlight the ringtone you wish

to set and press C [Select].

For more information on how to select a ringtone,

refer to “Setting a Melody as the Ringtone” on

page 15-137.

10 Press a or b to highlight “Vibration” and press

11 Press a or b to highlight “Enable,” “Disable” or

“Link to sound” and press B.

For information on how to set the vibration, refer to

“Setting the Vibration” on page 15-137.

In step 5, press C [Options] to display the

“Options” menu and select “Select current only” to

view only the selected group or “Select all” to view

all groups.

e_tm200_7fm.book Page 64 Tuesday, November 9, 2004 9:14 PM

9-65

Using the Contacts List

Memory Status

You can check the number of entries registered in the

“Contacts list.”

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Memory status” and

press B.

You can check the memory status of the handset

memory and SIM card.

Setting the Speed Dial List

You can set a maximum of 9 phone numbers in the

“Speed dial list.”

Setting Contacts List entries in the

Speed Dial List

1At the main menu, select in the following order:

“Contacts” → “Contacts list.”

2Press a or b to highlight the name you wish to

add to the “Speed dial list” and press B.

The “Contacts list” screen appears.

3Press a or b to highlight the phone number

you wish to add to the “Speed dial list” and press

C [Options].

The “Options” menu appears.

4Press a or b to highlight “Add to Speed dial”

and press B.

5Press a or b to highlight the Speed dial

number you wish to set and press B.

For information on making a call with Speed

dialling, refer to “Speed Dialling” on page 6-34.

The nine digit keys correspond to list numbers.

e_tm200_7fm.book Page 65 Tuesday, November 9, 2004 9:14 PM

9-66

Using the Contacts List

Checking Own Numbers

You can check your own voice, data and fax phone

numbers.

1At the main menu, select “Contacts.”

2Press a or b to highlight “My numbers” and

press B.

3Press a or b to highlight “Voice,” “Data” or

“Fax.”

The phone number you wish to check appears.

“Voice,” “Data” or “Fax” may not be displayed

depending on the SIM card.

Also the terms and the numbers of the records

displayed in the display for “Voice,” “Data” or

“Fax” may differ depending on the SIM card.

If your number is not saved on your SIM card,

you can enter it yourself. (Certain SIM cards do

not support this function.)

e_tm200_7fm.book Page 66 Tuesday, November 9, 2004 9:14 PM

10-67

Accessing “t-zones”

The handset is already designed to access the “t-zones”

multimedia services from T-Mobile and receive

information from the service.

“t-zones” is your gateway to entertainment, information

and excitement. For accessing “t-zones” and mobile

Internet surfing, the handset has the browser (WAP)

preinstalled. Through the browser, you can get useful

information and data. Web pages you can access and

view are designed for handset configurations.

Viewing the Browser

Press E while the handset is in standby mode.

The handset starts to access the “t-zones” site.

E can also be used while the handset is in the main

menu or 2nd level menu.

Navigating a Web Page

abcd: Navigate the highlights on the

screen.

B: Performs the option displayed in

the lower centre of the screen.

C: Launches the browser option

menu.

A: Selects an action displayed in the

lower left corner of the screen.

F (short press): Exit the browser.

If you have any problems connecting to this

network, call your network operator.

e_tm200_7fm.book Page 67 Tuesday, November 9, 2004 9:14 PM

11-68

Using the Message Service

This section provides information on how to create, send,

receive and read messages using the handset. With the

handset, you can send and receive not only text

messages but also messages with pictures, sounds or

videos. Pictures taken and sounds and video clips

recorded with the handset can be sent to other handsets

or e-mail addresses for viewing if they have the same

media playback capability.

Message Types Available with

the Handset

With the handset, three types of messages are available.

SMS (Short Message Service): This service enables

you to send text only messages of up to 1024 characters

to other users. You can send or receive messages even if

you are talking on the handset. Also text templates are

available to help you compose messages.

MMS (Multimedia Message Service): Your handset is

already enabled to deal with file attached messages. You

can send messages with graphical images, photographs,

sounds or video clips attached, and receive Browser

(WAP) alerts.

E-Mail: This function enables you to directly access the

E-mail messaging service for your Internet service

provider. You can also send or receive files through the

service. For information on how to set up your E-mail

function, refer to “Setting an Account” on page 15-158.

When sending an SMS message, messages

exceeding 160 characters are divided during

the sending process. If the recipient uses a

compatible handset, divided messages are

recombined and delivered as one message. If

sent to a non-compatible handset, messages

are divided into 152 character lots and

delivered separately.

When sending an MMS message, the size of

the message that can be sent is up to 295

kbytes.

Some messaging functions may not be

available, depending on the network service

you use. If you experience any problems using

these services, contact your service provider

for details.

e_tm200_7fm.book Page 68 Tuesday, November 9, 2004 9:14 PM

11-69

Using the Message Service

Creating and Sending Messages

Basic Operation

The following steps show you the basic way to create and

send messages.

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Messages”

and press B.

The “Messages” menu appears.

3Press a or b to highlight “Create message”

press B.

4Press a or b to highlight “SMS,” “MMS” or

“E-mail” and press B.

5Enter the phone number or E-mail address of the

destination you wish to send the message to and

press B.

If you are sending an SMS message:

You can only enter a phone number.

If you are sending an MMS message:

You can enter either a phone number or an E-mail

address.

If you are sending an E-mail message:

You can only enter an E-mail address.

In step 5, you can use several useful optional

functions for selecting a destination or reselecting

message type, etc. For information on these

functions, refer to “Address Options” on page 11-70.

6Enter your message.

For information on how to enter text, refer to

“Entering Text” on page 8-51.

In step 6, you can use several useful optional

functions such as using text templates or attaching

files to the message, etc. For information on these

functions, refer to “Message Options” on

page 11-71.

7When you have finished writing the message,

press B.

8Press a or b to highlight “Send” and press B.

The handset starts to send the message. After

sending the message, the message is listed in the

“Sent” box.

If you wish to save the message in the “Drafts” box,

select “Save to Drafts.”

You can check the message length at the top right

of the message screen to figure out how many

more characters you can enter.

e_tm200_7fm.book Page 69 Tuesday, November 9, 2004 9:14 PM

11-70

Using the Message Service

Address Options

In step 5 of “Basic Operation” (page 11-69), you can use

following useful optional functions.

To select a destination from “Contacts list”

1Press C [Options] (or press b) in step 5.

The “Options” menu appears.

2Press a or b to highlight “Contacts list” press

The “Contacts list” appears and you can search for

the phone number entering only the first few

characters. For information on how to search

“Contacts list” entries, refer to “Searching a Name

and Number in the Contacts List” on page 9-58.

To select a destination from “History”

In “History,” the last 8 destinations sent using messages

(SMS, MMS or E-mail messages) are recorded.

1Press C [Options] in step 5.

The “Options” menu appears.

2Press a or b to highlight “History” press B.

The destination list appears.

3Press a or b to highlight the destination you

wish to send the message to and press B.

If you wish to delete one of the destinations from the

list, press C [Options] and select “Delete” and

press B.

To reselect the message type

After selecting “SMS,” “MMS” or “E-mail message” in step

4 of “Basic Operation” (page 11-69), you can change to

another type of message later on.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Change to SMS,”

“Change to MMS” or “Change to E-mail” and

press B.

The message type is reselected. Follow the

operation from step 6 of “Basic Operation” on

page 11-69.

To add recipients to the message

1After entering a destination, press C [Options].

The “Options” menu appears.

When sending SMS message of more than

160 characters, a confirmation message

appears. Press C [Yes] to send or A [No] to

cancel.

If the MMS or E-mail messages cannot be sent

for some reason, the message stays in the

“Outbox” and “ ” is displayed on the standby

screen.

e_tm200_7fm.book Page 70 Tuesday, November 9, 2004 9:14 PM

11-71

Using the Message Service

2Press a or b to highlight “Add another contact”

and press B.

3Press a or b to highlight “To,” “Cc” or “Bcc”

and B.

If you are sending an SMS message, only the “To”

list screen appears. If you are sending an MMS

message, you cannot select “Bcc.”

4Enter the phone number or E-mail address of the

additional recipient and press B.

If you are sending an SMS message, select a blank

line from the “To” list and enter a phone number.

5When adding recipients is complete, press A

[Back].

Message Options

In step 6 of “Basic Operation” (page 11-69), you can use

following useful optional functions.

To use the text templates

The text templates you have created and stored in the

handset are also available when creating messages. For

information on how to create text templates, refer to

“Making Text Templates” on page 11-81.

1When making a message in any message type

(“SMS,” “MMS” or “E-mail”), press a, b, c or

d to move the cursor to the point you wish to

insert the text template, and press C [Options].

2Press a or b to highlight “Text template” and

press B.

3Press a or b to highlight the template you wish

to enter from the list and press B.

You can continue to make the message. If you wish

to end the message, go to step 7 of “Basic

Operation” on page 11-69.

To attach data (for MMS and E-mail only)

You can send photos, pictures, sounds and video clips by

attaching them to MMS or E-mail message.

You can enter up to 60 characters for “To,” “Cc” or

“Bcc.” This may be limited depending on your

service provider. Contact your service provider if

you have a problem sending mail.

When attaching video clips, “Slide show” is

automatically set to “Off.”

NVA (e-Animation file), AAC and MP3 cannot

be attached to the message.

When attaching a photo/picture file to a

message, the size of the file is automatically

reduced if exceeding the maximum (295

kbytes) size to send.

e_tm200_7fm.book Page 71 Tuesday, November 9, 2004 9:14 PM

11-72

Using the Message Service

1In step 6, of “Basic Operation” (page 11-69),

press C [Options].

The “Options” menu appears.

2Press a or b to highlight “Attach” and press

3Press a or b to highlight “Photo,” “Picture,”

“Sound,” “Video” or “Music” and press B.

The list of “My photos,” “My pictures,” “My sounds,”

“My videos” or “My music” appears.

4Press a or b to highlight the file you wish to

attach and press B.

The selected picture, sound or video clip is

attached.

5Press B to return to the message edit screen.

If you wish to remove the attached data, press a or

b to highlight the file name you wish to remove and

press C [Options]. Press C [Yes] to remove or

press A [No] to cancel.

To send a message using the message template

(for MMS only)

You can send message templates with an image and

voice attached.

1In step 6 of “Basic Operation” (page 11-69),

press C [Options].

The “Options” menu appears.

2Press a or b to highlight “Message template”

and press B.

“Discard message?” appears. Press C [Yes] to go

to next step or press A [No] to go back to text

editor.

3Press a or b to highlight a template you wish

to send and press B.

To Create the slide show (for MMS only)

This function enables you to create messages that have

up to 10 slides. Each slide can contain one picture, one

sound file and up to 1000 characters (up to the message

total of 295 kbytes.)

1In step 6 of “Basic Operation” (page 11-69),

press C [Options].

The “Options” menu appears.

2Press a or b to highlight “Slide control” and

press B.

The options available for the slide are:

Add: Add a new slide.

Remove: Remove the active slide.

Previous: Navigate to the previous slide.

Next: Navigate to the next slide.

e_tm200_7fm.book Page 72 Tuesday, November 9, 2004 9:14 PM

11-73

Using the Message Service

To add the subject of the message (for MMS

and E-mail only)

You can add a subject for the message before sending.

1After entering a message, press B in step 6 of

“Basic Operation” (page 11-69).

2Press a or b to highlight “Subject” and press

3Enter the subject of the message and press B.

To preview the message before sending (for

MMS and E-mail only)

You can preview the message before sending.

1After entering a message, press B in step 6 of

“Basic Operation” (page 11-69).

2Press a or b to highlight “Preview message”

and press B.

To reselect the message type

You can change to another message type in step 6 of

“Basic Operation” (page 11-69).

For information on reselecting message type, refer to “To

reselect the message type” on page 11-70.

Sending a Message from the Drafts

Box

1At the main menu, select in the following order:

“Messages” → “Drafts.”

2Press a or b to highlight the message you

wish to send and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Send” and press B.

If you wish to modify the message, press “Edit

message” instead of selecting “Send” in this step.

Video clip data cannot be attached to the

message as slide data.

If you select “Off,” you can attach 20 pictures,

sounds or video clips up to 295 kbytes in total.

To enable the slide show you must set “On” in

the “Slide show” setting. For information on the

“Slide show” setting, refer to “Settings for the

Messages” on page 11-79.

You can enter up to 40 characters as the subject.

This may be limited depending on your network

service. Contact your service provider if you have

problem sending mail.

e_tm200_7fm.book Page 73 Tuesday, November 9, 2004 9:14 PM

11-74

Using the Message Service

Receiving and Reading

Messages

Receiving Messages

When the handset is within the service area, SMS and

MMS messages are automatically received and saved in

the “Inbox.” Meanwhile, you need to operate manually to

receive E-mail messages held at the service provider. For

information on how to receive E-mail messages, refer to

“To receive E-mail messages.”

Also, you may need to download MMS messages

manually. For information on how to download MMS

messages manually, refer to “To retrieve a message (for

MMS only)” on page 11-78.

When receiving messages, the following indicators

appear at the top of the standby screen depending on the

type of the received message.

SMS: MMS: E-mail:

To receive E-mail messages

1At the main menu, select in the following order:

“Messages” → “Inbox.”

“New E-mail check” appears. If you select C [Yes],

the messages are delivered.

For information on “Check confirmation,” refer to

“The E-mail message settings” on page 11-80.

Reading Messages

Choose message in the “Inbox” to read the received

messages.

1At the main menu, select in the following order:

“Messages” → “Inbox.”

MMS messages marked with a clip denote

messages with attachments.

2Press a or b to highlight the message you

wish to read and press B.

3Press a or b to scroll through the message.

When you receive an SMS message, the sender’s

phone number and a part of the message

appears. When the sender’s phone number is

stored in the “Contacts list,” the sender’s name

appears instead of the phone number.

A message with “ ” (SMS message), “ ”

(MMS) or “ ” (MMS with attachment) icon

indicates an unread message.

If the “Inbox,” “Sent” or “Drafts” box is full, a red

icon is displayed. Delete unwanted messages.

For information on how to delete messages,

refer to “Deleting Messages” on page 11-78.

e_tm200_7fm.book Page 74 Tuesday, November 9, 2004 9:14 PM

11-75

Using the Message Service

4When you have finished reading the message,

press A [Back].

Replying and Forwarding Messages

You can reply to the sender of a received message or

forward the received message to another destination.

Also, you can modify the received message when

replying or forwarding. You can also call the sender of the

message using the phone number contained in the

message.

To reply to a message

1After reading a message or selecting a message

in “Inbox,” press C [Options].

The “Options” menu appears.

2Press a or b to highlight “Reply” and press B.

3Enter your message.

For information on how to enter text, refer to

“Entering Text” on page 8-51.

4Press B and select “Send.”

To forward a message

1At the main menu, select in the following order:

“Messages”→ select “Inbox” or “Sent.”

2Press a or b to highlight the message you

wish to forward.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Forward” and press

5Enter the phone number or E-mail address of the

recipient and press B.

If you wish to select the phone number (for SMS and

MMS message) or E-mail address (for MMS and

E-mail message) in the “Contacts list,” refer to

“Searching a Name and Number in the Contacts

List” on page 9-58.

If you wish to reply to all addresses on an MMS or

E-mail message, select “Reply All” in step 3.

When you forward a message, the attached

data is also sent to the recipient. However, the

handset will not send AAC, MP3 and any data

it recognises as having copyrights.

The “Subject” field is automatically filled with

the original subject preceded by “Fw:.” The

original message cannot be changed.

e_tm200_7fm.book Page 75 Tuesday, November 9, 2004 9:14 PM

11-76

Using the Message Service

To call the sender

You can call the sender of an SMS or MMS message in

the “Inbox” whose address (From) is the phone number.

1At the main menu, select in the following order:

“Messages” → “Inbox.”

2Press a or b to highlight the message from the

sender you wish to call and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Call sender” and

press B.

To extract the phone number from the

received message

You can call using phone number contained only in the

received SMS message.

1At the main menu, select in the following order:

“Messages” → select “Inbox,” “Drafts” or “Sent.”

2Press a or b to highlight the message that

contains the phone number you wish to extract

and press B.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Extract numbers”

and press B.

Phone numbers embedded in the message appear.

5Press C [Options].

6Press a or b to highlight “Call” and press B.

The handset starts to call the number.

Modifying a message

You can modify an original message you made before or

after sending it if the message you wish to modify is in the

“Drafts,” “Sent” or “Outbox.”

1At the main menu, select in the following order:

“Messages” → “Drafts,” “Sent” or “Outbox.”

2Press a or b to highlight a message you wish

to modify.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Edit message” and

press B.

5Modify the message and press B.

If you select “Send via SMS/MMS” in step 6, you

can use the number to make message. If you

select “Save to Contacts,” you can save the

number in the “Contacts list.”

e_tm200_7fm.book Page 76 Tuesday, November 9, 2004 9:14 PM

11-77

Using the Message Service

Saving the Phone Number or E-mail

Address of a Sender

1At the main menu, select in the following order:

“Messages” → select “Inbox,” “Drafts,” “Sent” or

“Outbox.”

2Press a or b to highlight the message from the

sender you wish to save.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Save to Contacts”

and press B.

For information on how to enter name and other

information, refer to “Saving Information to the

Contacts List” on page 9-56.

To check sender/receiver information (for

MMS and E-mail only)

1At the main menu, select in the following order:

“Messages” → select “Inbox,” “Drafts,” “Sent” or

“Outbox.”

2Press a or b to highlight the message you

wish to check and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Details” and press

The sender’s or receiver’s phone number or E-mail

address, time and date stamp, subject and size

appear.

To resend a message in the Outbox

1At the main menu, select in the following order:

“Messages” → “Outbox.”

2Press a or b to highlight the message you

wish to resend and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Re-send” and press

You can also modify received messages when

replying or forwarding them. For information on

how to reply or forward messages, refer to

“Replying and Forwarding Messages” on

page 11-75.

You cannot modify a “Slide show” message

that is created on another handset.

e_tm200_7fm.book Page 77 Tuesday, November 9, 2004 9:14 PM

11-78

Using the Message Service

To lock messages (for MMS and E-mail only)

MMS and E-mail messages can be locked so they are not

deleted by accident.

1At the main menu, select in the following order:

“Messages” → select “Inbox” or “Sent.”

2Press a or b to highlight the message you

wish to lock or unlock and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Lock/Unlock” and

press B.

To retrieve a message (for MMS only)

1At the main menu, select in the following order:

“Messages” → “Inbox.”

2Press a or b to highlight the alert you wish to

download.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Download” and

press B.

Deleting Messages

Deleting a message

1At the main menu, select in the following order:

“Messages” → select “Inbox,” “Drafts,” “Sent” or

“Outbox.”

2Press a or b to highlight the message you

wish to delete and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Delete” and press

Deleting messages by message type

If you wish to delete all of a certain type of message in a

box at one time, the following deleting option meets the

need.

1At the main menu, select in the following order:

“Messages” → “Delete messages.”

2Press a or b to highlight “Inbox,” “Sent,”

“Drafts” or “Outbox” and press B.

Each delete option is categorised by message type.

Select one of menu items (SMS, MMS or E-mail)

and press B to delete all messages of a certain

selected type.

You can press B to start downloading instead of

steps 3 and 4.

e_tm200_7fm.book Page 78 Tuesday, November 9, 2004 9:14 PM

11-79

Using the Message Service

Deleting All messages

If you wish to delete all messages in “Inbox/Drafts/Sent/

Outbox” at one time, perform the following operation.

1At the main menu, select in the following order:

“Messages” → “Delete messages.”

2Press a or b to highlight “All messages” and

press B.

Settings for the Messages

The steps below are instructions on SMS, MMS and

E-mail message settings.

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Messages”

and press B.

The “Messages” menu appears.

3Press a or b to highlight “Settings” and press

4Press a or b to highlight “SMS” or “MMS

message” and press B.

The SMS message settings

After step 4 of “Setting for the Messages,” set the

following items.

When you finish making settings, press A [Back].

Message centre:

Enter the message centre number to enable the service.

Message lifetime:

Set the time span that the message service centre

continually tries to send the message to the recipient you

specified.

If you wish to delete all messages in a certain box,

select “All Inbox/Drafts/Sent/Outbox messages.”

Once you have deleted messages, they cannot be

restored.

You cannot delete locked messages. For

information on how to lock messages, refer to “To

lock messages (for MMS and E-mail only).”

e_tm200_7fm.book Page 79 Tuesday, November 9, 2004 9:14 PM

11-80

Using the Message Service

Message format:

Select a message format from the 7 choices.

Connection type:

Select a connection type.

Optimisation:

Converts double-byte characters (such as European

characters with an accent) into single-byte characters

before sending the message. Note that you may be

charged double for sending double-byte character

messages.

The MMS message settings

After step 4 of “Setting for the Messages,” set the

following items.

When you finish making settings, press A [Back].

Account setting:

Refer to “Setting an Account” on page 15-158.

Home network:

Defers MMS message downloads when you use your

home network.

Roaming download:

Defers MMS message download when roaming outside of

your network.

Allow delivery report:

Enables “Delivery report” when receiving a message that

applies to the “Delivery report” function.

Anonymous reject:

Rejects messages from unknown or empty addresses.

Auto delete:

Deletes the oldest message automatically when the

“Sent” box is full.

Slide show:

Enables slide show when sending a message.

Advanced:

Priority: prioritises composed messages.

Delivery report: enables delivery report.

Expiry time: sets the expiry time for messages stored

in the server.

Slide interval: sets the slide display time when sending

a message.

The E-mail message settings

Account settings:

Refer to “Setting an Account” on page 15-158.

Check confirmation:

Select “Inbox” and Check your new E-mail.

e_tm200_7fm.book Page 80 Tuesday, November 9, 2004 9:14 PM

11-81

Using the Message Service

Making Text Templates

You can register up to 20 text templates for frequently

used text on the handset.

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Messages”

and press B.

3Press a or b to highlight “Text templates” and

press B.

The list of the text templates appear.

Saving Phrases to the Text Template

120 characters may be saved in any text template.

1At the main menu, select in the following order:

“Messages” → “Text templates.”

2Press a or b to highlight the item you wish to

3Enter the text and press B.

For information on how to enter text, refer to

“Entering Text” on page 8-51.

Editing Text Templates

1At the main menu, select in the following order:

“Messages” → “Text templates.”

The list of the text templates appear.

2Press a or b to highlight the item you wish to

edit and press B.

3Edit the text template and press B.

For more information on how to enter text, refer to

“Entering Text” on page 8-51.

Viewing Text Templates

1At the main menu, select in the following order:

“Messages” → “Text templates.”

2Press a or b to highlight the item you wish to

view and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “View” and press B.

The selected text template is displayed.

When you have finished confirmation, press A

[Back].

You cannot edit the text template in step 3.

e_tm200_7fm.book Page 81 Tuesday, November 9, 2004 9:14 PM

11-82

Using the Message Service

Deleting Text Templates

1At the main menu, select in the following order:

“Messages” → “Text templates.”

2Press a or b to highlight the item you wish to

delete and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Delete” and press

4Press C [Yes].

The selected text template is deleted.

If you wish to cancel deletion, press A [No] in this

step.

Using Voice Mail

You can use the voice mail service depending on the

service provider you use. For information on the voice

mail service, contact your service provider.

Calling Voice Mail

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Messages”

and press B.

The “Messages” menu appears.

3Press a or b to highlight “Voice mail” and

press B.

The “Voice mail” menu appears.

4Press a or b to highlight “Call Voice mail” and

press B.

Setting Voice Mail

1At the main menu, select in the following order:

“Messages” → “Voice mail.”

2Press a or b to highlight “Voice mail setting”

and press B.

Once you delete the text template, it cannot be

restored.

e_tm200_7fm.book Page 82 Tuesday, November 9, 2004 9:14 PM

11-83

Using the Message Service

Memory Status

This function helps you to check the memory status of

“Messages.”

1Press B.

2The main menu appears.

3Press a, b, c or d to highlight “Messages”

and press B.

4Press a or b highlight “Memory status” and

press B.

The memory status is indicated by using bar chart.

Setting Cell Broadcasts

This setting enables you to receive cell broadcast

messages such as weather forecasts and traffic reports.

If you are in a certain network area, your handset receives

the broadcast information for your subscription.

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Messages”

and press B.

The “Messages” menu appears.

3Press a or b to highlight “Cell Broadcasts” and

press B.

The “Cell Broadcasts” menu appears.

4Press a or b to highlight “On/Off” and press

5Press a or b to highlight “On” to set the Cell

Broadcasts on or “Off” to set it off and press B.

This menu may not be available with some mobile

networks. Contact your service provider for

details.

e_tm200_7fm.book Page 83 Tuesday, November 9, 2004 9:14 PM

11-84

Using the Message Service

Reading Cell Broadcast Messages

1When you receive a cell broadcast message,

press B.

A popup is displayed over the standby screen.

2Press a or b to scroll through the message.

3When you finish reading, press B.

Subscribing to Cell Broadcasts

Select the page of the cell broadcast message that you

want.

1At the main menu, select the following order:

“Messages” → “Cell Broadcasts.”

2Press a or b to highlight “Settings” and press

3Press a or b to highlight “Set info subjects”

and press B.

4Press a or b to highlight “Add/Remove” and

press B.

5Press a or b to highlight the page you wish to

view and press B.

When you have finished viewing, press A [Back].

You can set a maximum of four subjects for

subscription in step 5.

When you cannot find the page you wish to

view in the list that appears in step 5, select

“Create subject” in step 4 and enter the subject

code to add a page. For details on the subject

code, contact your service provider.

e_tm200_7fm.book Page 84 Tuesday, November 9, 2004 9:14 PM

11-85

Using the Message Service

Setting Cell Info

Cell info is the message information that operators send

to subscribers in certain areas. When you receive cell

info, the message (network info) is displayed on the

standby screen.

Enabling/Disabling Cell Info

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “Messages”

and press B.

The “Messages” menu appears.

3Press a or b to highlight “Cell info” and press

The “Cell info” menu appears.

4Press a or b to highlight “On” or “Off” and

press B.

Browsing the WAP Alerts

WAP Alerts are web based messages sent from a service

provider to subscribers. You can view the messages in

the “WAP Alerts” menu.

1At the main menu, select in the following order:

“Messages” → “WAP Alerts.”

The “WAP Alerts” list appears.

2Press a or b to highlight a message and press

This function may not be available on all phone

networks. Contact your service provider for more

information.

If cell info is set to “On,” the standby time will

decrease because of increase in battery usage.

This function may not be available on all networks.

Contact your service provider for more

information.

e_tm200_7fm.book Page 85 Tuesday, November 9, 2004 9:14 PM

12-86

Enjoying Multi Media

The “My Media” menu enables you to enjoy using multi

media such as pictures, sounds, video clips and music

tracks you created using the handset. You can download

the various contents through the “t-zones” web site. You

can also use and enjoy games and applications

downloaded from the “t-zones” web site.

Using Pictures

In the “My Media” menu, “My photos” and “My pictures”

are prepared for you to enjoy handling pictures. “My

photos” is the space for storing pictures taken with the

built-in digital camera, and “My pictures” is for storing

pictures downloaded through the mobile Internet. Both

“My photos” and “My pictures” have several useful

functions for you to view, edit, and attach pictures with

messages. Also, you can set pictures as wallpaper and if

you wish to get more wallpapers for the handset, you can

download them through the mobile Internet. With your

handset, you can enjoy using “More pictures” services

produced by T-Mobile. They enhance your pleasure of

using pictures with the handset.

The picture formats available on the handset are:

:PNG format

: JPEG format

: e-Animation file (NVA)

: GIF format

: BMP format

: WBMP format

: WPNG format

Downloading Pictures

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “My Media”

and press B.

3Press a or b to highlight “Pictures” and press

4Press a or b to highlight “More pictures” and

press B.

The download channel for pictures and wallpapers

appears. Select one of the channels and press B to

access the service. When the service appears on

the main display, follow the instructions to download

pictures.

e_tm200_7fm.book Page 86 Tuesday, November 9, 2004 9:14 PM

12-87

Enjoying Multi Media

Viewing Pictures

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image in the

thumbnail index you wish to view and press B.

The selected picture is displayed.

When you have finished viewing the picture, press

A [Back].

To scroll the picture

After displaying the picture in step 2, press a, b, c or

d to scroll the picture.

To view the pictures saved in memory card

2After step 1, press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Switch to memory

card” and press B.

The thumbnail index shows the pictures saved in

memory card.

Sending Pictures as Attachments

You can attach the pictures to the MMS or E-mail

message.

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

When viewing a picture from “My pictures,” the

maximum size of the picture that can be displayed

is 295 kbytes.

Some pictures cannot be scrolled depending on

the picture size.

When you view the pictures saved in memory

card, the menu item switches to “Switch to

Handset.”

Pictures stored in memory card may not be

viewed, edited, moved or copied depending on

its file size or picture size.

e_tm200_7fm.book Page 87 Tuesday, November 9, 2004 9:14 PM

12-88

Enjoying Multi Media

2Press a, b, c or d to select an image in the

thumbnail index you wish to attach and press B.

The selected picture is displayed.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Send via MMS” or

“Send via E-mail” and press B.

Following procedure is the same as making a

message. For information on how to make a

message, refer to the “Basic Operation” on

page 11-69. Perform the operation from step 5

(Entering a phone number or an E-mail address.)

Setting the stored image as wallpaper

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image in the

thumbnail index you wish to view and press C

[Options].

The “Options” menu appears.

3Press a or b to highlight “Set as Wallpaper”

and press B.

4Press a or b to highlight “Main Display” or

“External Display” and press B.

5Press B.

The displayed picture is set as the wallpaper.

To access pictures taken with the built-in digital

camera, select “My photos.” To access

pictures downloaded through the mobile

Internet, select “My pictures.”

When attaching a photo/picture file to a

message, the size of the file is automatically

reduced if exceeding the maximum (295

kbytes) size to send.

If you wish to view the full picture before sending

it, press B to display the image in step 2 before

pressing C [Options]. Then select “Send via

MMS” or “Send via E-mail” in the “Options” menu.

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

If you wish to view the full size image of the picture

before setting it as the wallpaper, press B to

display the image in step 2 before pressing C

[Options]. Then select “Wallpaper” in the “Options”

menu.

e_tm200_7fm.book Page 88 Tuesday, November 9, 2004 9:14 PM

12-89

Enjoying Multi Media

Editing Pictures

You can edit pictures by retouching, adding frames or

stamps or rotating. Also, you can adjust the size of the

picture or rename the picture file.

To reduce picture size

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image in the

thumbnail index you wish to reduce the size of

and press B.

The selected picture is displayed.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Edit photo” and

press B.

If you are in “My picture,” the menu item in step 4 is

“Edit picture.”

5Press a or b to highlight “Reduce photo size”

and press B.

If you are in “My picture” the menu item in step 5 is

“Reduce picture size.”

The options for reducing the picture size appear.

The following shows the menu items depending on

the size of picture or photo selected.

When “2M pixel” is selected:

1M pixel (858×1144)

Large (768×1024)

Medium (480×640)

Small (240×320)

Tiny (120×160)

When “1M pixel” is selected:

Large (768×1024)

Medium (480×640)

Small (240×320)

Tiny (120×160)

When “Large” is selected:

Medium (480×640)

Small (240×320)

Tiny (120×160)

The picture size may change after the editing

operation.

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

e_tm200_7fm.book Page 89 Tuesday, November 9, 2004 9:14 PM

12-90

Enjoying Multi Media

When “Medium” is selected:

Small (240×320)

Tiny (120×160)

When “Small” is selected:

Tiny (120×160)

6Press a or b to highlight one of the menu

items and press B.

The picture size is reduced.

To reduce picture quality

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image in the

thumbnail index you wish to reduce the size of

and press B.

The selected picture is displayed.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Edit photo” and

press B.

If you are in “My picture,” the menu item in step 4 is

“Edit picture.”

5Press a or b to highlight “Reduce photo

quality” and press B.

The picture quality is reduced.

To retouch pictures

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image in the

thumbnail index you wish to retouch and press

The selected picture is displayed.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Edit picture” and

press B.

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

e_tm200_7fm.book Page 90 Tuesday, November 9, 2004 9:14 PM

12-91

Enjoying Multi Media

5Press a or b to highlight “Retouch” and press

6Press a or b to highlight one of the options

below and press B.

The “Retouch” options:

Sepia, Sparkling, Ripples, Tile, Emboss, Oil

painting, Clear frame, Round frame, Soft frame,

Zigzag frame

7The selected option is confirmed on the display.

Press B to apply.

If you wish to cancel, press A [Cancel].

To add a frame to pictures

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image in the

thumbnail index you wish to add a frame to and

press B.

The selected picture is displayed.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Edit picture” and

press B.

5Press a or b to highlight “Add frame” and

press B.

6Press a, b, c or d to select a frame and

press B.

7The selected option is confirmed on the display.

Press B to apply.

If you wish to cancel, press A [Cancel].

To add stamps to pictures

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

When you retouch a picture, a new retouched

picture is created as the other file and the original

picture is saved.

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

When you add a frame to a picture, a new picture

with a frame is created as the other file and the

original picture is saved.

e_tm200_7fm.book Page 91 Tuesday, November 9, 2004 9:14 PM

12-92

Enjoying Multi Media

2Press a, b, c or d to select an image in the

thumbnail index you wish to add stamps to and

press B.

The selected picture is displayed.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Edit picture” and

press B.

5Press a or b to highlight “Add stamps” and

press B.

6Press a, b, c or d to select a stamp and

press B.

7Press a, b, c or d to move the cursor to the

point you wish to add the stamp and press B.

To add more stamps, press C [Options] and select

“Other Stamps,” and then repeat steps 6 and 7.

8To finish stamping, press C [Options] and select

“Save.”

To rotate pictures

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image in the

thumbnail index you wish to rotate and press B.

The selected picture is displayed.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Edit picture” and

press B.

5Press a or b to highlight “Rotate” and press

The picture is rotated 90° counterclockwise.

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

When you add stamps to a picture, a new picture

with stamps is created as the other file and the

original picture is saved.

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

e_tm200_7fm.book Page 92 Tuesday, November 9, 2004 9:14 PM

12-93

Enjoying Multi Media

6Press B once to rotate the picture 90°

counterclockwise.

7Press C [Save].

Adjusting the size of pictures

You can adjust the size of pictures for any purpose such

as for displaying in the external display.

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image you

wish to adjust the size of and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Adjust size” and

press B.

4Press a or b to highlight one of the size

options and press B.

The “Adjust size” options:

Main display, External display, Power on/off,

Incoming, Alarm

Renaming the picture

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image in the

thumbnail index you wish to change the name of

and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Rename” and press

The text entry screen appears. For more information

on how to enter text, refer to “Entering Text” on

page 8-51.

When you have finished renaming, press

to save.

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

e_tm200_7fm.book Page 93 Tuesday, November 9, 2004 9:14 PM

12-94

Enjoying Multi Media

Setting Pictures as Caller ID

You can add pictures to the “Contacts list” and set the

pictures as Caller ID.

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image in the

thumbnail index you wish to add to the “Contacts

list” and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Set as Caller ID” and

press B.

Two options appear. Select “Existing entry” or “New

entry” according to your purpose.

To save the picture to an existing entry

4After step 3, press a or b to highlight “Existing

entry” and press B.

To save the picture in a new entry

4After step 3, press a or b to highlight “New

Entry” and press B.

Checking the Picture Information

1At the main menu, select in the following order:

“My Media” → select “My photos” or “My

pictures.”

The thumbnail index appears.

If you wish to view the full picture before renaming

it, press B to display the image in step 2 before

pressing C [Options]. Then select “Rename” in

the “Options” menu.

The following characters cannot be used for the

file name: /, \, :, *, ?, “, <, >, | and . (full stop).

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

When adding the picture to “Contacts list” as the

Caller ID, the maximum size of the picture that can

be added is 150 kbytes. Only pictures stored in the

handset memory are available for the Caller ID.

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

e_tm200_7fm.book Page 94 Tuesday, November 9, 2004 9:14 PM

12-95

Enjoying Multi Media

2Press a, b, c or d to select an image in the

thumbnail index whose details you wish to check

and press B.

The selected picture is displayed.

3Press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Photo details” and

press B.

If you are in “My picture,” the menu item in step 4 is

“Picture details.”

Moving or Copying Pictures to

Memory Card

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image you

wish to move or copy to memory card and press

C [Options].

The “Options” menu appears.

3Press a or b to highlight “Move to memory

card” or “Copy to memory card” and press B.

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

If you view the pictures saved in memory card, the

menu items switch to “Move to Handset” and

“Copy to Handset,” and you can move or copy

pictures from memory card to the handset

memory.

e_tm200_7fm.book Page 95 Tuesday, November 9, 2004 9:14 PM

12-96

Enjoying Multi Media

Deleting Pictures

1At the main menu, select in the following order:

“My Media” → “Photos” → “My photos,” or

“Pictures” → “My pictures.”

The thumbnail index appears.

2Press a, b, c or d to select an image in the

thumbnail index you wish to delete and press C

[Options].

The “Options” menu appears.

3Press a or b to highlight “Delete” and press

4Press a or b to highlight “One photo/picture”

or “All pictures” and press B.

5Press C [Yes].

If you wish to cancel deletion, press A [No] in this

step.

Using Sounds

In the “Sounds” function mode, you can download various

sounds and ringtones from the “t-zones” web site.

The sound formats available on the handset are:

: Original Ringtones (composed in Melody Editor)

:SMAF format

: MIDI format

: i Melody format

: WAVE format

: AMR format

To access pictures taken with the built-in digital

camera, select “My photos.” To access pictures

downloaded through the mobile Internet, select

“My pictures.”

Once you delete a picture, it cannot be restored.

If you wish to view the full picture before deleting,

press B to display the image in step 2 before

pressing C [Options] and then select “Delete” in

the “Options” menu.

SMAF (Synthetic music Mobile Application

Format) is a music data format for handsets.

AAC & MP3 format files are also supported.

For information on these file formats, refer to

“Using Music” on page 12-110.

e_tm200_7fm.book Page 96 Tuesday, November 9, 2004 9:14 PM

12-97

Enjoying Multi Media

Downloading Sounds

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “My Media”

and press B.

3Press a or b to highlight “Sounds” and press

The “Sounds” menu appears.

4Press a or b to highlight “t-music” and press

The download channel for sounds and ringtones

appears.

Playing Back Sounds

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

The list of “My sounds” appears.

2Press a or b to highlight an item you wish to

playback and press B.

Playback of the selected sound file starts.

When you wish to stop playback, press B.

Playing Back sounds saved in

memory card

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

The list of “My sounds” appears.

2Press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Switch to memory

card” and press B.

The list of “My sounds” shows the sound file names

saved in memory card.

You can playback or stop the sound file in the

“Options” menu by pressing C [Options] in step 2.

When you access sound files saved in the

memory card, the menu item switches to “Switch

to handset.”

e_tm200_7fm.book Page 97 Tuesday, November 9, 2004 9:14 PM

12-98

Enjoying Multi Media

Sending Sounds as Attachments

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

The list of “My sounds” appears.

2Press a or b to highlight the file you wish to

send as an attachment and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Send via MMS

message” or “Send via E-mail”and press B.

For information on how to create messages, refer to

“Using the Message Service” on page 11-68.

Checking the Sound Information

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

The list of “My sounds” appears.

2Press a or b to highlight a file whose details

you wish to check and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Sound details” and

press B.

Changing the Name of Sound Files

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

The list of “My sounds” appears.

2Press a or b to highlight a file whose name

you wish to change and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Rename” and press

The text entry screen appears. For information on

how to enter text, refer to “Entering Text” on

page 8-51.

4When you have finished renaming, press B to

save.

Sounds with a red icon cannot be sent as an

attachment.

The following characters cannot be used for a file

name: /, \, :, *, ?, ", <, >, | and . (full stop).

e_tm200_7fm.book Page 98 Tuesday, November 9, 2004 9:14 PM

12-99

Enjoying Multi Media

Moving or Copying Sounds to

Memory Card

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

The list of “My sounds” appears.

2Press a or b to select a sound file you wish to

move or copy to the memory card and press C

[Options].

The “Options” menu appears.

3Press a or b to highlight “Move to memory

card” or “Copy to memory card” and press B.

Moving or Copying Sounds to My

music

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

2The list of “My sounds” appears.

3Press a or b to select a sound file you wish to

move or copy to “My music” and press C

[Options].

4The “Options” menu appears.

5Press a or b to highlight “Move to My music”

and press B.

Deleting Sounds

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

The list of “My sounds” appears.

2Press a or b to highlight an item you wish to

delete and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Delete” and press

4Press a or b to highlight “One sound” or “All

sounds” and press B.

5Press C [Yes].

If you wish to cancel, press A [No] in this step.

If you access sound files saved in a memory card,

the menu items switch to “Move to handset” and

“Copy to handset,” and you can move or copy

sounds from memory cards to the handset

memory.

Once you delete a sound file, it cannot be

restored.

e_tm200_7fm.book Page 99 Tuesday, November 9, 2004 9:14 PM

12-100

Enjoying Multi Media

Using Melody Editor

You can create original ringtones by using “Melody

editor.”

Your original ringtone is registered in “My sounds.”

To create an original ringtone

Enter the name of the melody

1At the main menu, select in the following order:

“My Media” → “Sounds” → “Melody editor.”

2Press a or b to highlight “Create new” and

press B.

3Enter the title of your original ringtone and press

You can enter up to 24 characters as the title. For

information on how to enter text, refer to “Entering

Text” on page 8-51.

Setting tempo and the type of chords

4Press a or b to highlight one of the tempos

below and press B.

The tempos: “Allegro (Fast)” 150

“Moderato (Normal)” 125

“Andante (Slow)” 107

“Adagio (Very Slow)” 94

Tempo is defined by the number of crochet beats

( ) played per minute (bpm).

5Press a or b to highlight “8 chords,” “16

chords” or “32 chords” and press B.

The “Score input” screen appears.

Input melody

6Press the digit key to specify the pitch of the

musical note or rest.

For more information, refer to “To input a melody” on

page 12-101.

7Press P or R to specify the length of the

musical note or rest.

For more information, refer to “To input a melody” on

page 12-101.

8Press d after inputting one note.

Input the next note after the cursor moves to the

right.

9Repeat steps 6 to 8 to complete the melody.

When you press B during input, the melody that

you have entered is played back.

Press C [Options] and select “Play before Cursor”

while entering notes to playback the melody

displayed on the screen up to the cursor position.

Press C [Options] and select “Select Chord” to

select another chord. Repeat steps 6 to 8 to input

notes for the new chord.

e_tm200_7fm.book Page 100 Tuesday, November 9, 2004 9:14 PM

12-101

Enjoying Multi Media

Save the ringtone

10 When you finish inputting, press C [Options].

The “Options” menu appears.

11 Press a or b to highlight “Save” and press B.

12 Press a or b to highlight “Save to My sounds”

and press B.

To input a melody

Specifying the pitch of the musical note

You can specify the pitch of a musical note and rest by

pressing the keys shown below.

Pressing the keys above once specifies a crotchet ( ) in

middle scale (no mark).

Pressing the same key repeatedly shifts the note through

the available octave range ( or added corresponding

to octave range).

Pressing a or b while a note is selected causes the

note to move a semitone higher or lower.

Pressing Q enters a Crochet rest .

You can copy, cut, and paste notes by using the

“Options” menu in the “Score input” screen.

If the capacity or memory in “My sounds” becomes

insufficient, the message “Maximum capacity: 250

Not registered.” or “Not registered. Memory full.” is

displayed. The display returns to the screen of

step 12. Try again after deleting unnecessary

items.

(Do)

(Re)

(Mi)

(Fa)

(Sol)

(La)

(Si) Rest

GHIJKLMQ

e_tm200_7fm.book Page 101 Tuesday, November 9, 2004 9:14 PM

12-102

Enjoying Multi Media

Specifying the length of notes and rests

You can specify the length of each musical note and rest

by pressing P or R repeatedly. Pressing R

changes the length of notes and rests in reverse to

pressing P.

If you wish to specify a dotted note or a triplet, press O

after selecting the target note.

Specifying a tie

To specify a tie, press N after selecting the target

notes.

An underscore (_) is displayed next to the note and the

note is tied with the next.

To enter the next note, press d and move the cursor to

the right, then repeat the operation to input the melody.

If the cursor is positioned next to a note, you can repeat

the note immediately to the left of the cursor by pressing

a or b.

Sample steps to input melody

To get used to inputting melodies, input the simple

melody shown below.

Crotchet (Crotchet rest)

Quaver (Quaver rest)

Seminquaver (Seminquaver rest)

Semibreve (Semibreve rest)

Minim (Minim rest)

You cannot make a dotted semi quaver (dotted

semi quaver rest) or a dotted semi breve

(dotted semi breve rest).

Three continuous notes are required for a

triplet.

e_tm200_7fm.book Page 102 Tuesday, November 9, 2004 9:14 PM

12-103

Enjoying Multi Media

1At the main menu, select in the following order:

“My Media” → “Sounds” → “Melody editor” →

“Create new.”

2Enter the title of your original ringtone and press

3Select the tempo and the type of chords.

The “Score input” screen appears. For information

on selecting the tempo and the type of chords, refer

to “Setting tempo and the type of chords” on

page 12-100.

4Press G to input “C.”

The “C” note sounds and the “C” crotchet appears in

the “Score input” screen.

5Press d to move the cursor.

6Press K to input “G.”

7While selecting “G” crotchet, press P to

change the length of the note.

“G” crotchet changes to “G” quaver.

8Press d to move the cursor.

9Press Q to input a crotchet rest and press P

to change the crochet rest to a quaver rest.

A quaver rest appears next to the “G” note in the

“Score input” screen.

10 Press d to move the cursor.

11 Press I to input an “E” note and press b to

move the note one semitone lower.

12 Press B to play back the melody.

To edit the existing melody

1At the main menu, select in the following order:

“My Media” → “Sounds” → “Melody editor.”

2Press a or b to highlight “Existing melodies”

and press B.

The list of “Existing melodies” appears.

3Press a or b to highlight the melody you wish

to edit and press C [Options].

The “Options” menu appears.

4Press a or b to highlight “Edit data” and press

The title entry (edit) screen appears.

After this step, follow the steps from step 6 of “To

create an original ringtone” on page 12-100.

You can also start editing the existing melody from

“My sounds” by following the next steps.

e_tm200_7fm.book Page 103 Tuesday, November 9, 2004 9:14 PM

12-104

Enjoying Multi Media

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

2Press a or b to highlight the item you wish to

edit and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Edit data” and press

Only a user created melody can be selected in this

step.

To set the tone of each chord

1In the “Score input” screen, press C [Options].

(Refer to “To create an original ringtone” on

page 12-100.)

The “Options” menu appears.

2Press a or b to highlight “Set tone” and press

The “Set tone” screen appears.

3Press c or d to change the category of tones.

You can select tones from the following 16

categories:

Pianos, Organs, Basses, Chimes, Guitars,

Strings 1, Strings 2, Reeds, Synth Leads, Brasses,

Flutes/Pipes, Synth Pads, Synth Effects,

Percussions, Ethnics, Effects

4Press a or b to highlight a tone.

The selected tone is applied to the selected chord.

Press C [Options] in this step and select “Play

current chord” to play back the melody input in the

selected tone.

Press C [Options] in this step and select “Confirm

tones” to play back the scale (1 octave from C) in the

selected tone.

5Press B to set the tone and go back to the

“Score input” screen.

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

2Press a or b to highlight the item whose tone

you wish to set and press C [Options].

The “Options” menu appears.

Only a user created melody can be selected in this

step.

3Press a or b to highlight “Set tone” and press

4Press a or b to highlight the chord whose tone

you wish to set and press B.

The “Set tone” screen appears.

You can also reach the “Set tone” screen for the

existing melodies from “My sounds” by following

the next steps.

e_tm200_7fm.book Page 104 Tuesday, November 9, 2004 9:14 PM

12-105

Enjoying Multi Media

To set the strength of each chord

1In the “Score input” screen, press C [Options].

(Refer to “To create an original ringtone” on

page 12-100.)

The “Options” menu appears.

2Press a or b to highlight “Set strength” and

press B.

The “Set strength” screen appears.

3Press a or b to highlight “Loud,” “Medium” or

“Soft” and press B.

By pressing C [Play] in this step before pressing

B, you can check the strength of the selected

chord.

1At the main menu, select in the following order:

“My Media” → “Sounds” → “My sounds.”

2Press a or b to highlight the item whose

strength you wish to set and press C [Options].

The “Options” menu appears.

Only a user created melody can be selected in this

step.

3Press a or b to highlight “Set strength” and

press B.

4Press a or b to highlight the chord whose

strength you wish to set and press B.

The “Set strength” screen appears.

You can also reach the “Set strength” screen for

existing melodies from “My sounds” by following

the next steps.

e_tm200_7fm.book Page 105 Tuesday, November 9, 2004 9:14 PM

12-106

Enjoying Multi Media

Using Games or Applications

You can use various kinds of games and applications with

the handset. To use games and applications, download

these via the Internet. Some games and applications offer

the ability to connect to a network either within a game or

through a network based application.

Downloading Games or Applications

Before downloading games or applications, you are

asked to confirm what you are about to receive. After

checking the information on the confirmation screen, the

game or application can be downloaded. User

authentication may be required on some information

screens.

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “My Media”

and press B.

3Press a or b to highlight “Games & more” and

press B.

The “Games & more” menu appears.

4Press a or b to highlight “t-games” and press

The download channel to games or applications

appears.

Starting a Game or an Application

1At the main menu, select in the following order:

“My Media” → “Games & more” → “My games &

more.”

The list of “My games & more” appears.

The games and the applications downloaded to the

handset are listed in chronological order.

2Press a or b to highlight a game or application

you wish to start.

3Press B.

The selected game or application starts.

If you run network based games or applications, you

can select a connection to the network.

To end the game or application

1While you are running the application, press F.

2Press a or b to highlight “End” and press B.

Applications may be both localised (no

connectivity) and network based (using the mobile

Internet to update information/play games). You

may be charged for using network-based

applications. Please contact your service provider

for more information.

e_tm200_7fm.book Page 106 Tuesday, November 9, 2004 9:14 PM

12-107

Enjoying Multi Media

To suspend the game or application

1While you are running the application, press F.

2Press a or b to highlight “Suspend” and press

Viewing the Game or Application

information

1At the main menu, select in the following order:

“My Media” → “Games & more” → “My games &

more.”

The list of “My games & more” appears.

2Press a or b to highlight a game or application

whose information you wish to view and press

C [Options].

The “Options” menu appears.

3Press a or b to highlight “Application details”

and press B.

The detailed information screen appears.

Deleting the Game or Application

1At the main menu, select in the following order:

“My Media” → “Games & more” → “My games &

more.”

The list of “My games & more” appears.

2Press a or b to highlight a game or application

you wish to delete and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Delete” and press

4Press C [Yes].

The selected game or application is deleted.

If you wish to cancel, press A [No] in this step.

Using Videos

The “Videos” function enables you to play back the video

clips created using the built-in digital camera. Also, more

video clips for the handset are available via the mobile

Internet service.

Downloading Video Clips

1Press B.

The main menu appears.

2Press a, b, c or d to highlight “My Media”

and press B.

You cannot delete preinstalled applications.

Once you delete a game or application, it cannot

be restored.

e_tm200_7fm.book Page 107 Tuesday, November 9, 2004 9:14 PM

12-108

Enjoying Multi Media

3Press a or b to highlight “Videos” and press

The “Videos” menu appears.

4Press a or b to highlight “t-movies” and press

Playing Back Videos

1At the main menu, select in the following order:

“My Media” → “Videos” → “My videos.”

The thumbnail index for “My videos” appears.

2Press a, b, c or d to select the image of the

video clip in the thumbnail index you wish to play

back and press B.

The selected video clip is displayed and press B.

To play back the videos saved in memory card

2After step 1, press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Switch to memory

card” and press B.

The thumbnail index appears.

Changing the name of the video

1At the main menu, select in the following order:

“My Media” → “Videos” → “My videos.”

The thumbnail index for “My videos” appears.

2Press a, b, c or d to select the image of the

video clip in the thumbnail index you wish to

change the name of and press C [Options].

The “Options” menu appears.

Press

to highlight “Rename” and press

The text entry screen appears. For information on how

to enter text, refer to “Entering Text” on page 8-51.

4After renaming, press B to save.

Sending Videos as Attachments

1At the main menu, select in the following order:

“My Media” → “Videos” → “My videos.”

The thumbnail index for “My videos” appears.

2Press a, b, c or d to select the image of the

video clip in the thumbnail index you wish to

send with a message and press C [Options].

The “Options” menu appears.

When you access the video clip files saved in the

memory card, the menu item switches to “Switch

to handset.”

The following characters cannot be used for a file

name: /, \, :, *, ?, ", <, >, | and . (full stop).

e_tm200_7fm.book Page 108 Tuesday, November 9, 2004 9:14 PM

12-109

Enjoying Multi Media

3Press a or b to highlight “Send via MMS” or

“Send via E-mail” and press B.

For more information on creating messages, refer to

“Using the Message Service” on page 11-68.

Checking Video Information

1At the main menu, select in the following order:

“My Media” → “Videos” → “My videos.”

The thumbnail index for “My videos” appears.

2Press a, b, c or d to select the image of the

video clip in the thumbnail index you wish to

check the details of and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Video details” and

press B.

Moving or Copying Videos to

Memory Card

1At the main menu, select in the following order:

“My Media” → “Videos” → “My videos.”

The thumbnail index for “My videos” appears.

2Press a, b, c or d to select a video clip file

you wish to move or copy to the memory card

and press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Move to memory

card” or “Copy to memory card” and press B.

Deleting Videos

1At the main menu, select in the following order:

“My Media” → “Videos” → “My videos.”

The thumbnail index for “My videos” appears.

2Press a, b, c or d to select the thumbnail

image of the video clip you wish to delete and

press C [Options].

The “Options” menu appears.

3Press a or b to highlight “Delete” and press

4Press a or b to highlight “One video clip” or

“All video clips.”

5Press C [Yes].

If you wish to cancel, press A [No] in this step.

When you access video clip files saved in the

memory card, the menu items switch to “Move to

handset” and “Copy to handset,” and you can

move or copy videos from memory card to the

handset memory.

Once you delete a video file, it cannot be restored.

e_tm200_7fm.book Page 109 Tuesday, November 9, 2004 9:14 PM

Sharp NAR0058 GSM900/DCS1800/PCS1900 Tri band cellular phone User Manual Manual revised 1

Sharp Corporation GSM900/DCS1800/PCS1900 Tri band cellular phone Manual revised 1

Contents

Manual revised 1

Navigation menu

Namespaces

Views

Navigation