ShenZhen Aoni Electronic Industry A8B047 Bluetooth Headphone User Manual Users manual
ShenZhen Aoni Electronic Industry Co., Ltd. Bluetooth Headphone Users manual
Users manual
User’s Manual Model No: B047 Important safety instruction If used in the correct method, this design and production of this product can ensure your personal safety completely. However, any inappropriate use may lead to potential risk and danger of electric shock or fire hazard. Please read all the safety instructions before installing and using the product. In particular, attention shall be given to the following information: 1. It needs to be stored or used in the ambient temperature. 2. It shall not be placed in water or wet locations. 3. It can’t be disposed randomly for it may cause environmental pollution. 4. Without approval, It shall not be disassembled or repaired. 5. The built-in lithium battery can’t be disposed in the fire or other places to prevent causing fire hazards. 6. It shall be cleaned with dry cloth. 7. Whenever there is damage, it needs to be repaired by professional personnel. Charging the battery Fully charge the battery for about 3 hours before using the battery for the first time. 1. Plug the smaller end of USB charging cable into the Micro-USB interface of the connector. 2. Next, plug the other end of USB charging cable into other power charging devices or a computer with the power on. Status LED indicator Charging When power is low, then there will be a voice prompt “dududu”, while the RED LED flashes twice per 5second at music-playing mode (flashes once per 5s at other mode)—this alarm will occur in every 3minutes, and it will lasts about 3-5 times until the headphone power off automatically. The red light solid on. Fully charged The red indicator will go out . Low battery Package content 1. Wireless headphone 2. Micro USB charging cable 3. 3.5mm audio cable 4. user maunal Earphone indicator Product feature Pairing name Li-battery capability Talking time Playing time Charging time Charger mode Straight-line distance Operation instructions Operation instructions function Key operation power on Taotronics TT-BH040 750 mAh 30hours 25 hours 3 hours Micro USB 5V/1A ≥10m description At Power off state, press power button for 3s, there is voice prompt “power on". Loose the Long press button, it will go into pairing state power button automatically if it’s first device pairing; if the for 3s Bluetooth devices information existed before, it will go into standby state directly (headset re-pairs automatically in 3 minutes). it will LED status Blue LED light on for 2s, then it flash in an alternating pattern (200mS) power off if 10minutes no connection at standby state. Power off Long Press power button for 3s Pairing Press power button for 5s connection N/A status Disconnect( automaticall N/A y) Play Pause Volume up Volume down Next Track Previous Track Answer call On call Reject call Red LED light At Power on state, press power button for 3s, on 2s and then there is voice prompt “power off" go off At Power off state, long press power button for Red and blue 5s, and it will go into pairing state while there LED flash is a voice prompt "Paring". At the same time alternately the headphone will be detected by other device. Blue LED flash There have voice prompt “your phone is once every 5s connect ”when Bluetooth pairing successfully Blue LED If the phone disconnects automatically, there flashes in an is a voice prompt” your phone is disconnect” 200ms interval Blue LED Short press Short press power button can replay the Flashes twice power button music while the headphone is in pause status every 5sec Blue LED Flesh Short press Short press power button can pause the once every power button music while the headphone is in play status 5sec Short press Volume+ can increase the volume Blue LED Flesh Short press level while on music playing mode or talk twice every Volume+(15 mode, there will hear "beep" while the volume 5sec Level ) is to Max Short press Volume- can decrease the volume short press Blue LED Flesh level while on music playing mode or talk Volume-"(15 twice every mode, there will hear "Beep" at min volume Level ) 5sec while the volume is to Min Blue LED Flesh Long Press Long press Volume+ to go to next song twice every Volume+ 5sec Blue LED Flesh Long Press Long press Volume- to go to next song twice every Volume5sec RED LED flash Short press power button can answer a call fast in an Short press while there is a call incoming; again a short alternating power button press of power key can end a call pattern (200mS) Blue LED light N/A N/A will be always on Long press Press and hold power button for Blue LED Flesh power button approximately 2s can reject a call while once every for 2s Voice transfer Call hold Remove call hold End call Multipoint A2DP Connection Redial last number Charging Line in low battery Long press power button for 2s Press power button there is a call incoming 5sec Long press power button for 2s can transfer the voice between the headphone and phone after answering the call Long press power button can keep the current call while answering a call Blue LED light on Blue LED light on Blue LED Flesh Short press Short press the power button can return to twice every power button first call while in call hold status 5sec Blue LED Flesh Short press Short Press the power button can end a call twice every power button while the call in progress 5sec headphone can connect to phones((iPhone6s、SamsungS6) two RED LED flash in an Double click Double click power button can do redial last fast alternating power button number pattern (200mS) When in charging, the red LED will be always on; once the energy is full,it will go off When the Audio cable is plug in, the headphone will play music in line-in mode(the headphone will power off automatically) When power is low, then there will be a voice prompt “dududu”, while the RED LED flashes twice per 5second at music-playing mode (flashes once per 5s at other mode)—this alarm will occur in every 3minutes, and it will lasts about 3-5 times until the headphone power off automatically. Pairing the headphones with a computer 1.Before pairing the headphone with your computer, please make sure your computer or laptop can support bluetooth function. If not, you must purchase a bluetooth adapter (preferably version 2.1 or above). 2. Insert the bluetooth adapter to the computer, and make sure the bluetooth function of the computer is already activated. 3. Press the power button about 5s when the headphone is at power off status. It will go into paring mode when the blue and red LED light flash alternately, while you can also hear a prompt 4. Open the bluetooth software and choose to search the bluetooth device, and after few seconds, the names of bluetooth device will list out. 6. Click the pairing name “Taotronics TT-BH040”to pair, when there is a prompt “beep”, this means your headphone is paired successfully . FCC NOTICE changes or modifications not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter ference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communic ations. However, there is no guarantee that interference will not occur in a particular installation. If this equipme nt does cause harmful interference to radio or television reception, which can be determined by turning the equi pment off and on, the user is encouraged to try to correct the interference by one or more of the following mea sures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Reorient or relocate the receiving antenna. 3) Reorient or relocate the receiving antenna. 4) Consult the dealer or an experienced radio/TV technician for help important announcement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 7 Language : zh-CN Tagged PDF : Yes Author : zhengl Creator : Microsoft® Office Word 2007 Create Date : 2018:04:02 03:29:24 Modify Date : 2018:04:02 03:29:24 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools