SHENGLAI TECHNOLOGY LX270 Bluetooth Headphone User Manual

Guangdong Shenglai Technology Co., Ltd. Bluetooth Headphone

User Manual

User ManuslFUNCTION INTRODUCTIONPAIRING1.Power on:long press for 2 seconds, voice prompts “power on”.2.Power off:long press for 2 seconds,voice prompts”power off”.3.Sefie:double press — 1.Initial Pairing: Bluetooth headphone will enter pairing modeautomatically,voice prompts “pairing”. Turn on Bluetooth functionon device and select “HEADSET MODEL”,on PIN code needed.Voice prompts“connected” when pairing successfully.2.Re-Pairing:Long press for about 2 seconds in power offmode,headset enter pairing mode when red and blue. LEDindicator lights flash puickly.3.Bluetooth headset will pairing device which paired beforeautomatically when power on.Answer phone calls:Single pressHang up phone calls: Single pressRe-dial last phone call:Double pressPlay/pause music:Single pressVolume +/-:Single press + / — Previous/Next song:Long press + / —OPERATING GUIDELED INDICATOR1.Charging:Red light keeps on in charging mode,blue light onWhen fully charged.2.Power on:Blue light flash for 1 time.3.pairing mode: Red and blue lights flashing alternately.4.paired mode:Blue light is off.5.Standby mode:Blue light flash every 1.5 seconds.6.Play mode:Blue light flash every 1.5 seconds.7.Power off:Red light keeps on for 3seconds.NOTICEPlease charge the Bluetooth headphone when voice prompts “Battery Low”.Bluetooth HeadphoneLX270FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. User should avoid un-intended operation of usage when it is collocated with other transmitters or antenna.

Navigation menu