Shure orporated MXCNFC1 NFC Module User Manual Installation Guide NFC LMA

Shure Incorporated NFC Module Installation Guide NFC LMA

Contents

Installation Guide

Installation Guide
134-30393
Compliance and Regulatory Statements
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
The end product must be labeled, in a visible area, with the following:
Contains FCC ID: 616A-MXCNFC1
Modification Warning
The equipment is intended to be used in professional audio applications. Changes or modifications
not expressly approved by Shure Incorporated could void your authority to operate this equipment. To
ensure compliance and performance, this MXC Delegate Unit must be used with fully shielded
Ethernet cables.
RF Exposure Statement
This transmitter complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.
Canada DOC Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la
classe B est conforme à la norme NMB-003 du Canada.
Industry Canada (IC) Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation of this device
is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The end product must be labeled, in a visible area, with the following:
Contains IC: 616A-MXCNFC1
Approved Antenna information
Only the integrated antenna on module is allowed and cannot be user replaceable.
General
The 134-30393 module has been certified as a Limited Single Modular. Additional evaluation is
required for use in all host devices. The following describes the installation procedures for the various
hosts in which the module has been evaluated.
Installation Instructions for Shure MXC Delegate Units
The 134-30393 is not intended for OEM integrators or end users. It can only be installed in the
MXC Delegate Units at the grantee manufacturing facility.

Navigation menu