Shure orporated P3TB Non-Broadcast Base Station Transmitter User Manual

Shure Incorporated Non-Broadcast Base Station Transmitter Exhibit D Users Manual per 2 1033 c3

a href="https://usermanual.wiki/Shure-orporated" itemprop="url"> Shure orporated >

Exhibit D Users Manual per 2 1033 c3

© 2014 Shure Incorporated27A23049 (rev. 1)Printed in ChinaSTEREO WIRELESS PERSONAL MONITORING SYSTEMUSER GUIDELe Guide de l’UtilisateurGuia del UsuarioGuida dell’UtenteBedienungsanleitungManuale d’usoРуководство пользователяGebruikershandleidingPSM   300®
2IMPORTANT SAFETY INSTRUCTIONS1.  READ these instructions. 2.  KEEP these instructions. 3.  HEED all warnings.4.  FOLLOW all instructions. 5.  DO NOT use this apparatus near water. 6.  CLEAN ONLY with dry cloth. 7.  DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturer’s instructions. 8.  DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open flame sources on the product. 9.  DO NOT defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11.  ONLY USE attachments/accessories specified by the manufacturer.12.  USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13.  UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14.  REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.  DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. 16.  The MAINS plug or an appliance coupler shall remain readily operable. 17.  The airborne noise of the Apparatus does not exceed 70dB (A). 18.  Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. 19.  To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 20.  Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.21.  Operate this product within its specified operating temperature range.WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.SAFETY PRECAUTIONSThe possible results of incorrect use are marked by one of the two symbols—"WARNING" and "CAUTION"—depending on the imminence of the danger and the severity of the damage. WARNING: Ignoring these warnings may cause severe injury or death as a result of incorrect operation.CAUTION: Ignoring these cautions may cause moderate injury or property damage as a result of incorrect operation.CAUTION•  Never disassemble or modify the device, as failures may result.•  Do not subject to extreme force and do not pull on the cable or failures may result.•  Keep the product dry and avoid exposure to extreme temperatures and humidity.WARNING•  If water or other foreign objects enter the inside of the device, fire or electric shock may result.•  Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.This device is able to produce sound volume higher than 85 dB SPL. Please check your maximum allowed continuous noise exposure level based on your national employment protection requirements. WARNINGLISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE. Over exposure to excessive sound levels can damage your ears resulting in permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs. 90 dB SPLat 8 hours95 dB SPLat 4 hours100 dB SPLat 2 hours105 dB SPLat 1 hour110 dB SPLat ½ hour115 dB SPLat 15 minutes120 dB SPLAvoid or damage may occurImportant Product InformationLICENSING INFORMATIONLicensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. Information to the userThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and the receiver.•  Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.•  Consult the dealer or an experienced radio/TV technician for help.This device complies with Industry Canada licence-exempt RSS standard(s). Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.  Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)Note: EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC performance. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Download:
Mirror Download [FCC.gov]
Document ID2328057
Application ID7jD9w9hYBAejloih4Yv7xg==
Document DescriptionExhibit D Users Manual per 2 1033 c3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize191.1kB (2388688 bits)
Date Submitted2014-07-17 00:00:00
Date Available2014-09-29 00:00:00
Creation Date2014-06-05 10:13:11
Producing SoftwareAdobe PDF Library 10.0.1
Document Lastmod2014-07-11 10:42:55
Document TitleExhibit D Users Manual per 2 1033 c3
Document CreatorAdobe InDesign CS6 (Windows)
FCC ID Filing: DD4P3TB

Navigation menu