Sleep Number 4000B SNBB1 User Manual

Select Comfort Corp SNBB1 Sleep Number App Quick Start

a href="https://usermanual.wiki/Sleep-Number" itemprop="url"> Sleep Number >

User Manual

Before You Begin Sleep Number App Quick Start If you haven’t already, you will need to get the unique Identifier (UDID) for your iPhone or iPod Touch, and then download and install the Select Number App. The instructions for downloading and installing the application should have already been given to you System Requirements - iPhone or iPod Touch  - Software Version 4.0 or later is required   - Sleep Number App installed   - WiFi turned on - WiFi router - Sleep Number bed with Corolla Pump - Bridge Controller  Overview Your Sleep Number App system comes with a Bridge Controller that allows your iPhone or iPod Touch to communicate with the Sleep Number bed pump via your home WiFi network. The following setup diagram illustrates how the various system components should be set up.           SELECT COMFORT Corporation *Caution Statement: Per FCC 15.21: Changes or modifications to this product not expressly approved by Select Comfort Corporation could void the user's authority to operate the equipment.. This device complies with: A) Part 15 : Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received Including interference that may cause undesirable operation Caution:   To prevent electric shock, Do not remove cover. No user serviceable parts inside. Refer to servicing to qualified personnel.
  Sleep Number App Quick Start Step 1: Unpack and check contents - Bridge Controller (x1) - Power Supply (x1) - Ethernet Cable (x1)   Step 2: Connecting to your home network The Bridge needs to connect to your home WiFi router using an Ethernet cable.  A 3-foot cable has been provided for you, however longer cables can be used to give you more flexibility in positioning the Bridge. a) Make sure that the power supply is not plugged into the Bridge yet. b) Plug the Ethernet cable into an available Ethernet port on your wireless router. c) Plug the other end of the Ethernet cable into the Ethernet port on the back of the Bridge. d) Plug the power supply into the power jack on the Bridge and then plug the power cord into the wall.  This will power on the Bridge. e) The blue Sleep Number icon on the Bridge will glow blue and blink, and the green and amber lights on the Ethernet port will begin to flash. f) When the blue Sleep Number icon stops flashing and stays lit, the Bridge has been successfully connected to your home network.
Download:
Mirror Download [FCC.gov]
Document ID1428688
Application IDqiAMtU5LwHeqZLh9W5nbSw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.62kB (95294 bits)
Date Submitted2011-03-09 00:00:00
Date Available2011-03-09 00:00:00
Creation Date2011-03-03 13:51:14
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2011-03-03 13:51:27
Document TitleSleep Number App Quick Start
Document CreatorAcrobat PDFMaker 9.0 for Word
FCC ID Filing: LPM4000B

Navigation menu