Socket Mobile CHS3 Cordless Hand Scanner User Manual

Socket Mobile, Inc. Cordless Hand Scanner

a href="https://usermanual.wiki/Socket-Mobile" itemprop="url"> Socket Mobile >

Contents

User Manual

User’s Guide Bluetooth® CHS 7X, 7XRx © 2009 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, SocketScan, Connect!Agent, ActivePairing, Socket Bluetooth Cordless Hand Scanner, and Business Mobility Now! are registered trademarks or trademarks of Socket Mobile, Inc. The Bluetooth word mark is a registered trademark of the Bluetooth SIG, Inc. USA, and any use by Socket Mobile, Inc. is under license. All other trademarks and trade names contained herein may be those of their respective owners. System Requirements: 1. HID with Keyboard Translation support 2. Any of the following OS platforms: -Windows Mobile/CE 5 or 6.1 -Windows 7/Vista/XP OR Any of the following devices: -Socket SoMo -Dell Axim 51v with WM/CE 5 -HTC with WM/CE 6.1 3. Bluetooth support with any of the following stacks: -Microsoft SP3 BT v2.0 -Microsoft BT v2.1 with Win 7 -Toshiba BT v2.0, v1.2, v1.1 -Broadcom BT v2.0 -BlueSoleil v2.3.00 or v5.4.11 BT v2.0 Basic Functionality *Note that no software is required for normal operation Function Procedure(s) Powering on /off Power On: Press and hold down the power button until you hear two (low-high) tones. Power Off: Press and hold down the power button until you hear two (high-low)Scanning bar codes Press and release Trigger button when scanning bar codes. The scanner will beep, flash LED, and vibrate confirming the bar code has been decoded and data transferred to the paired system. Factory Reset Reverts CHS back to factory default state. 1. Power on CHS 2. Press and hold down the Trigger button and momentarily press the Power button while still holding down the Trigger button. 3. After 15 seconds, a single beep following a series of 5 tones will play confirming reset is Pairing Reset Releases the Bluetooth pairing from the last system the scanner was paired to. This allows new pairing to another system. 1. Power on CHS 2. Press and hold down the Trigger button and press the Power button until you hear a series of 3 tones. Retrieving Scanner and Firmware information 1. Power on CHS and pair via Bluetooth with system. 2. Open Notepad or Notes application and set cursor in application. 3. Press and hold down Trigger button for 15 seconds or until information outputs in text into Notepad /Notes application. Package Contents • 1 Socket Bluetooth Cordless Hand Scanner • 1 Rechargeable Li-ion Battery installed (do not remove) • 1 Charging cable (Cradle not included) LED LED LED Behavior Meaning 1 blink per second Bluetooth radio is on, but not connected Bluetooth Status (Blue) 1 blink per 5 seconds Scanner connected to system 1 blink per scan Data successfully scanned and transmitted to host device Good Read (Green) On solid When charging and is fully charged 1 blink per second When battery is low On solid Battery in process of charging Battery Status (Red) Off Off or Good Battery status Beeps Beep Patterns Meaning 2 beeps (low-high) Power on 2 beeps (high-low) Power off 1 beep (with Blue LED) Initial connection to system 1 beep following 2 beeps (same tone) Re-connection to last paired system 3 downstream beeps Pairing Reset completed. Scanner will power off 1 beep following series of 5 beeps Factory Reset completed. Scanner will power off LED Trigger button Power button
Download:
Mirror Download [FCC.gov]
Document ID1233685
Application IDSFM41pyReF7xZO5rK1s3vA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize41.25kB (515679 bits)
Date Submitted2010-01-27 00:00:00
Date Available2010-01-27 00:00:00
Creation Date2010-01-20 08:19:07
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2010-01-20 08:19:07
Document TitleMicrosoft Word - CHS 7X 7XRx Operating InstructionsforRegulatory.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: Owner
FCC ID Filing: LUBCHS3

Navigation menu