Socket Mobile USB-1 Class 1 Bluetooth USB Adapter User Manual

Socket Mobile, Inc. Class 1 Bluetooth USB Adapter Users Manual Revision 3

a href="https://usermanual.wiki/Socket-Mobile" itemprop="url"> Socket Mobile >

Users Manual Revision 3

Class 1 Bluetooth USA Adapter User’s Guide April 3, 2003 Document Number: (011107-1006-BTW_btw1.2_docs_BTWDocs.doc) Version: 1.4 Socket Communications , Inc.37400 Central Court Newark,CA 94560 U.S.A
Regulatory Approvals FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). Channel The Wireless Channel sets the radio frequency used for communication. •Access Points use a fixed Channel. You can select the Channel used. This allows you to choose a Channel which provides the least interference and best performance. In the USA and Canada, 11 channel are available. If using multiple Access Points, it is better if adjacent Access Points use different Channels to reduce interference. • In "Infrastructure" mode, Wireless Stations normally scan all Channels, looking for an Access Point. If more than one Access Point can be used, the one with the strongest signal is used. (This can only happen within an ESS.) • If using "Ad-hoc" mode (no Access Point), all Wireless stations should be set to use the same Channel. However, most Wireless stations will still scan all Channels to see if there is an existing "Ad-hoc" group they can join.This device has been tested and meets the FCC RF exposure guidelines. The maximum SAR value reported is 0.27w/kgThis transmitter must not be co-located or operating in conjunction withany other antenna or transmitter.
Download:
Mirror Download [FCC.gov]
Document ID506361
Application IDdYuTOMxa7LM5eMfnKPpqKg==
Document DescriptionUsers Manual Revision 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize43.78kB (547219 bits)
Date Submitted2005-01-14 00:00:00
Date Available2004-12-30 00:00:00
Creation Date2003-04-04 06:08:01
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2005-01-12 12:00:46
Document TitleUsers Manual Revision 3
FCC ID Filing: LUBUSB-1

Navigation menu