Sonus Telecom IBM3920 2.4 GHz DSS Digital Cordless Telephone User Manual users manual 1

Download:
Mirror Download [FCC.gov]
Document ID	156593
Application ID	VGh9vLidVxGx01XMebSjwA==
Document Description	users manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	222.55kB (2781885 bits)
Date Submitted	2001-06-26 00:00:00
Date Available	2001-06-26 00:00:00
Creation Date	2001-06-05 09:10:48
Producing Software	Acrobat 4.05 Scan Plug-in for Windows
Document Lastmod	2001-06-21 09:57:31
Document Title	users manual 1
Document Creator	Acrobat 4.05 Scan Plug-in for Windows

2.0 POWER UP AND INITIALIZATION
lBM3920 Base-
Do we want the handset to beep continuously for a page find?
IBM 3920 Handset:
Plug in the battery on the IBM 3920 Handset. The handset unit will power up and
return to the display standby mode with some default values (Jan 01 Monday
Username 12:00AM) for Calendar, Day, Time and Username as shown below if
the handset has been registered to the base
Jan 01
Username
Monday
12:00AM
jar'ne is eta rig. If.there9:Wereranyf Q , Q
previously in memory they will be restored at power—up and the display may show
the New Call Screen rather than the Date/Time screen:
Jan 01 MondaY
Username 12:00AM _
12 New Calls
MEM CID
Jan 01 MondaY
Username12:00AM
Message Walting
MEM CID
' SONUS TELECOM, INC.
FCC ID : OU3IBM3920
JOB # : 244AKI—1
EXHIBIT #; /9
IBM 3920 Functional Operation Specification Page 8 of 56
TT Systems LLC Proprietary and Confidential Information Febmary 27, 2001
Jan 01 Monday
Username 12:00AM
Extension In Use
PC CID
2.0 Registering the handset to Base
To registerthe handset to the base unit, just put the handset back into the cradle
And the handset will randomly select one of the 65000 security codes and
registered to the base.
How is the handset registered to the base?
3.0 PROGRAM MODE -
There are many user settings that can be programmed into each handset Some
are important and others are less important and are provided for the user so they
can customize their phone as desired.
Programming Notes:
There are many user settings on the phone that can be changed as desired.
1. Program Mode is entered from the standby mode (Time/Date Displayed) by
press and hold the MENU key for over 1 second.
2. During programming if no key is entered within 15 seconds the program mode
will be exited and the Time/Date (Standby mode) screen will be displayed.
3. During programming if a change was made and the CONFIRM IOK key was not
pressed, the change will not be accepted.
4. After the programming confirmation (OK), the [61/[17] keys can be used to go to
another programmable user setting (within 15 seconds)
5. Press the [01/[15] key to select setting you want to change. The order of the
user settings when pressing the UP arrow key [ o ] will be as follows.
Handset Programming Options:
1. Username programming (8 characters max)
;#4for each line)
.Time and Date (Default— Jan 01 Monday, Username 12:00AM)
Caller ID Area Code Programming (Home and Seven Local Area Codes)
Languages (English Spanish French) (Default — English)
Key Beep (On/off) (default on)
FLASH Time Programming(100ms, 270ms. 400ms. 580ms Godms, 620ms
esoth‘s, moms)
9. Pause Time Programming (1 second to 9 seconds)
10.Tone/Pulse Mode Programming
11.Line In Use (LIU) Check Enable/Disable Programming
12. Handset reset programming (Factory Default Settings)
3.1 Handset Username Programming
Each handset can have a unique username.
1. To program the username. press and hold [Menu] key .
2. The “ Username” option is highlighted
>Username
Rl NGER LEVEL
Rl NG TONE
0k Exit
3.Press [0k] key to select the current choice and displays the following sub—level
message. The default is [Username].
Enter UsErname
Exit
If no keys pressed within 15 seconds, the unit will exit the current choice and
Return to standby display mode.
4. Press 0-9, #, and * to enter the name Alpha numerical entry is done using
several key presses on the same key to toggle between the different characters
located on the keys, eg. A, B, C, 2, A, B, C, 2 and so on. After a timeout the cursor
will move right and the display will go to step 6.
Enter UserName
A_
OK <--- Exit
5. Press 0-9, #, and ' to enter the name. Alpha numerical entry is done using
several key presses on the same key to toggle between the different characters
located on the keys, eg. A, B, C, 2, A, B, C, 2 and so on After a timeout the cursor
will move right and the display will go to step 7. When the maximum number of
characters ( 8 ) have been entered, the cursor will disappearr
Press [< — — —] key to move the cursor back one Iocation.Use the table to program
each character:
K e y 1st 2"4 3rd 4th 5th 5‘" 7th 8th 9th 10m
1 Space 1
2 A B c 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N o s
7 P Q R s 7
8 T u v s
9 w x Y z 9
0 o - , : ‘ “ 7 i
* * / ( ) & @
3t
1t
6. The following LCD will be displayed
Enter UserName
AB~
Ok <-»- Exit
7. Press [0k] key to store the Extension Username and go back to previous menu
selection.
8. Press [Exit] key to exit programming mode and return to previous screen.
3.2 Line Ring OnIOff Programming
Default configuration is the CO line will ring at low level.
1 To program the CO Line Ringer On/Off, press and hold [Menu] key, then press
[up]/[down] key until the [Ringer LEVEL] option is highlighted. The LCD will
display as follow.
>RINGER LEVEL
RING TONE
Time And DAte
Ok ExiT
2. Press [OK] key to select the current choice and displays the following sub-level
message
RING-ER LEVEL
Off
Save ExiT
fififi [UM/[down] key to change from OFF, Low, and High.
4.Press [Save] to save the selected options.
5. Press [Exit] to go back to previous menu.
3.3 Ringer Tone Programming
4 different ringer tones (sounds) may be selected. (1—4 tones). Default is ringer
tone1. Once the tone is selected, this ring tone will be heard on the ringing lines.
m ogram‘ the RingerTones, press and hold [Menu] key , then press
[Up]/[Down] until the [Ring Tone] option is highlighted. The LCD will display as
follow.
>RING TONE
Time And Date
Local Area Code
0k Exit
2. Press [OK] key to select the current choice and displays the following sub—level
message,
3. The display will show the current ringer tone status for the selected line, from
selection 1 to 4 different tones.
Ring Tone #1
Save Exit
4.Press [UP]I[DOWN] key to adjust the TONE from 1 to 4 and repeat the cycle
again. As the tones are switched the phone will ring the tone displayed.
5.Press [Save] to save the selected options.
6.Press [Exit] to go back to previous menu.
3.4 Time and Date
The standby (Time/Date) display shows the Month, Date, Day, and Time. For
users without Caller ID this needs to be fully programmable. For users with Caller
lD, the incoming Caller ID will update the Time and Date, but the Day (Monday,
Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday) needs to be
programmed. Default is Jan 01 Monday, Username 12:00AM
1. To program the time and date, press and hold [Menu] key , then press
[Up]/[Down] until the [Time and Date] option is highlighted. The LCD will display as
follow.
>Ti me And
AREA CODES
LanguAge
OK
Date
Exi
2. Press [OK] key to select the current choice and disp
message. If no keys pressed within 15 seconds, the un
and return to standby display mode.
Jan 01 Monday
JAN
Save Exit
ays the following sub»level
it will exit the current choice
3. The Character "Jan" in line 3 is flashing and the user can press [up]/[down] to
select the month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec)
The characterfor each month displayed will be flashing. If no keys pressed within
15 seconds, the unit will exit the current choice and return to standby display mode
without saving the new settings.
4. Press [Save] key to program the date, Press [Back
selection.
key to go back to month
Feb 01
01
Save
Back
Exi
Monday
he digit "01" in line 3 will be flashing.
fillfdown] to show from 01 through 31 or-enter 2~digits dateii
agfikéy to programme day
Feb
Save
07
Monday
MONDAY
Back Exit
The day of week "Wednesday" in line 3 will be flashing.
8. Press [up]/[down] to select the DAY OF WEEK. (Tuesday, Wednesday,
Thursday, Friday, Saturday, Sunday. Monday)
9. Press [Save] key to program the Hour.
The digit "12" will be flashing in line 3.
11. Press [up]/[down] to select the Hour.
12. Press [Save] key to program the Minutes The digit "00" will be flashing.
Save
05:00AM
00
Back Exit
144 Press [up]/[down] to select the minutes The allowable minutes are from 00
through 59.
151 Press [save] to program AMIPM
{AM use the [um/[down]. Possible options‘are AM ‘
Press [Save] to save the current setting and go back to standby mode
" Pressing [Save] will enter the next displayed field. So if no [change is ‘
ed for the Month Field for example, pressing [Save] key when the month
flashing will move the flashing cursor to the next field which' Is the Date field and so
on:
16.Press [Exit] key to exit menu programming mode and return to previous main
menu.
3.5 Area Code Programming (One Home area code and 7 local area codes)
Home and Local Area Codes need to be programmed for Caller lD Dialback to
work correctly, The Local Area Codes are provided for areas with 10-digit dialing
where multiple area codes are used to service the calling area. One Home Area
Code can be programmed and up to 7 local area codes can be programmed if
needed.
To Program the Home Area Code:
14To program the Home Area Code, press and hold [Menu] key , then press
[Up]/[Down
as follow.
>Area Codes
Language
Key Beeps
Ok Exit
2. Press [0
message.
k] key to select the current choice and disp
until the [Local Area Code] option is highlighted, The LCD will display
ays the following sub-level
Home Area Code
3. Enter First digit of the 3 digits home area code using the dial keys
[12/3/4/5/6/7/8/9/0].
HOme Area Code
6 _ _
< - - - E x i t
4.Enter the second digit of the 3 digits home area code using the dial keys
[1/2/3/4/5/6/7/8/9/0].
Home Area Code
6 1 _
< - - — E x i t
5. Enter the third digit of the 3 digits home area code using the dial keys
[1/2/3/4/5/6/7/8/9/0].
Home Area Code
6 1 9
Sa v e < - - - E r a s e
6..Press [Save] to save the new settings and return to previous menu.
7. Press [< —-—] in order to go back and edit the home area code.
SPress [Erase] key if need to erase the current home area code.
9.The next LCD screen will be shown.
Home Area Code
Delete 7
Yes No
10.Press [Yes] key to confirm and the Home Area Code is erased to show the next entry.
11. Press [No] key to exit without changing the current setting.
12. Repeat the above steps to setup the rest of the local area codes and press
[Exit] key to exit to the previous mode.
To Program the 7 other Local Area Codes:
1.To program the Local Area Code, press and hold [Menu] key , then press [OK] to
select [Handset settings], press [Up]/[Down] until the [Area Codes] option is
highlighted. The LCD will display as follow
>Area Codes
Language
0k Exit
2.Press [0k] key to select the current choice and displays the following sub-level
message,
Home Area Code
Exit
3. Press [Up]/[Down] key to show the next local area code
Area Code #1
Exit
4. Enter First digit of the 3 digits local area code # 1 using the dial keys
[12/3/4/5/6/7/8/9/0].
Area Code #1
6--
<—-- Exit
5.Enter the second digit of the 3 digits local area code #1 using the dial keys
1 using the dial keys
[1/2/3/4/5/6/7/8/9/0].
A r e a C o d e # 1
6 1 A
< - - - E x i t
6. Enter the third digit of the 3 digits local area code #
[1/2/3/4/5/6/7/8/9/0],
A r e a C o d e # 1
6 1 9
Sa v e < - - - E r a s e
7..Press [Save] to save the new settings and return to previous menu.
8. Press [< --»] in order to go back and edit the local area code #1.
9.Press [Erase] key it need to erase the current local area code #1.
10.The next LCD screen will be shown.
Area Code
Delete ?
Yes
#1
No
1 1 Press [Yes] key to confirm the local Area Code #1 is erased to show the next entry.
12. Press [No] key to exit without changing the current setting.
13. Repeat the above steps to setup the rest of the local area codes and press
[Exit] key to exit to the previous mode.
3.6 Multi-Language Programming (English, Spanish or French)
1. To change the multi—Ianguage settings, press and hold [Menu] key , then press
[Up]/[Down] until the [Language] option is highlighted. The LCD will display as
follow. The default is English.
>Language
Key Beeps
Flash Ti
Ok
me
Exi
2. Press [0k] key to select the current choice and disp
message.
>English
Espanol
Francais
0k
Exi
ays the following sub-level
3.Press [c]/[t] to Highlight Spanish or French.
4.Press [OK] to confirm the language and go back to the previous menu.
5.Press [Exit] to return to the standby screen.
3.7 Key Beeps Enable and Disable
1. Press and hold [Menu] key , then press [OK] to select [Handset settings], press
[Up]/[Down] until the [Key Beeps] option is highlighted. The LCD will display as
follow. The default is enable.
>Key Beeps
Flash Time
Pause Time
0k
2. Press [0k] key to select the choice.
Key Beeps
Enable
Ok Exit
3.Press [o’]/[‘c] key to toggle from “enable" to “disable" and vice versa.
4. Press [OK] to confirm the line privacy enable/disable mode and go back to main
menu.
3.8 FLASH Time Programming
The Flash time duration can be programmed from 100ms up to 700ms if needed to
adjust to different phone company operating systems. Default Flash time is 0.6
second.
To program the Flash time duration, press and hold [Menu] key , then press
[Up]/[Down] until the [Flash Time] option is highlighted. The LCD will display as
follow.
>F|ash Time
Pause Time
Tone/Pulse Mode
0k Exit
2. Press [0k] key to select the current choice and displays the following sub-level
message.
Flash Time
600 MS
sAVE <--- Exit
iv
ms pyidown] to change the flash time from 100ms to 700ms.
4.Press [0K] key to save the flash time and go back to previous menu.
5.Press [Exit] to go back to main menu without changing the selection.
3.9 Pause Time Programming
The Pause time duration can be programmed from 15 up to 10 sec. The default
pause time is 4 seconds.
1. To program the Pause time duration, press and ho d [Menu] key , then press
[Up]/[Down] until the [Pause Time] option is highlighted.
>Pause TIme
Tone/PuLse Mode
Line In Use Chk
Ok Exit
2. Press [0k] key to select the current choice and displays the following sub-level
message
P a u s e T I m e
0 4 S e c 0 N d s
SAVE <--- Exit
3.Press [cl/[1] to change the pause time from 15 to 10 seconds.
4.Press [OK] key to save the pause time and go back to previous menu.
5.Press [Exit] to go back to previous menu without changing the selection
3.10 Tone/Pulse Mode Programming
The dialing mode can be programmed to be Tone or Pulse dialing. The default
dialing models DTMF Tone mode.
1. To program the Tone/Pulse mode, press and hold [Menu] key , then press
[Up]/[Down] until the [Tone/Pulse Mode] option is highlighted.
>ToneIPuLse Mode
Line In Use Chk
Factory Default
Ok Exit
2. Press [OK] key to select the current choice and displays the following sub—level
message.
>ToNe Mode
PuLse Mode
0k Exit
3. Press [up]l[down] key to change the dialing mode (Tone or Pulse).
4. Press [OK] to confirm the dialing mode and go back to previous menu.
3.11 Handset Reset Programming
This programming mode is used to reset all user-programmed settings to the
factory default values on the handset
1. Press and hold [Menu] key , then press [Up]/[Down] until the [Factory Default]
option is highlighted. The LCD will display as follow.
>FaCtory Default
Ok Exit
2, Press [0k] key to select the current choice and displays the following sub—level
message, ‘
FaCtory Default
MaSter Reset?
YES NO
3.Press [NO] key to exit without saving or reset any va ues.
4. Press [XES] to confirm master reset mode with all programmed values reset to
the factory default values and go back to main menu.
>LiNe in Use Chk
FaCtory Default
0k Exit
2.>“Press [0k] key to select the current choice and displays the following subzl‘evel
message
LINE IN use CHK
on
SAVE Exit
3. Press [up]I[down] key to change the dialing mode (ON or OFF).
4. Press [OK] to confirm the dialing mode and go back to previous menui
Note: Line in use, if on will check if the line is in use before allowing the user.to
connect to the telephone line. if the line is in use the user will get the message
“LINE lN USE” . to connect to the line push the [TALK] key with in 3 seconds:
LINE IN USE
|NTERRUPT?
YES NO
, is pressed the unit will go off hook. If [NO] or 3 seconds the I
”idle state.
Setting User Setting Default Value
Speed Speed Dial MemorUO (emp_ly)
1 Username Username
2 Clock/Calendar JAN 01 MONDAY 12:00AM
3 CO Ring OnlOff The line will ring with low ring
4 Ring Tone Ring Tone 1
5 Area Code(s) Home and 7 local area codes are set to “empty"
6 Language English
7 Key Beep Enable
8 Flash Time 600 ms (0.15 lo 2 s)
9 PauseTime 4s (isto105)
10 Tone/Pulse Tone Dialing Mode
11 Line In Use Deleclion Enabled
Volume Handset Receive Volume Level 3 (out of 8 levels)
Level
Volume Headset Receive Volume Level 3 (out of 8 levels)
Level
4. CALLER ID OPERATION
4.1 Receiving Caller ID Calls from One Line
The user will need to subscribe to the Caller ID service from their local telephone
company The IBM 3920 System will support Caller ID Type 1 on-hook Single and
Multiple Message Formats, and will also support Visual Message Waiting
Indication (VMWI) with Type 2 call waiting.
1.When a Caller ID call is received, the LCD will show the name and number ofthe
incoming call, and the date and time the call is received. Some telephone
companies send both the name and the number of the caller. Others may provide
just the number of the calling party,
For example: No Home Area Code Match
619-279-1234
TOMMY SMITH
AII displays‘will switch for memory and Cid will be right justified
279-1234
TOMMY SMITH
Home Area Code Match (was programmed to 619)
PrioRIty Call
619-555~3967
LYNETT JONES
" Priority Call"
New Call
619-555-3967
LYNETT JONES
"New CaII”
Repeat Call
279-1234
TOMMY SMITH
" Repeat Call”
Blocked Call
“Blocked Call”
No Calle
ID
Avai Ie
a b
“ Out of Area"
Notes:
1. Local Area Code doesn’t effect the displayed number. It’s only used during Caller ID Dial Back.
The other display messages are:
— "Blocked Call" for Blocked Calls
- “No Caller ID Available” for Outside Calls
— “No Name” if the Name is not received
- "No Numbei” if the Number is not received
After a Caller ID Call is received the display will change to the New Call idle screen.
Jan 01 Wednesday
Username 12:00AM
12 New Calls
MEM CID
OI'
Jan 01 Wednesday
Username 12:00AM
Message Waiting
MEM CID
2. After a new call is received, the CID New Call screen is displayed when:
The Caller hangs up and ringing stops.
An extension telephone answers the call
You answer the call and hang up.
You perform anothertelephone function
3. When new call is received or ifthere are any new calls in memory, the New Call
LED will be flashing to indicate the New Call status. After all new call are reviewed
the New Call LED will turn Off.
4. The New Call LED will be flashing at 0.13 on and 13 off whereas if there is only
VMWI available, the flash rate is 1 second on and 1 second off. If both new call and
VMWI are present, VMWI takes precedent over the new call flash rate
4.15 Name matching with Caller ID
If a caller ID call is received and the number matched a number in the phone book
the name stored in the phone book will be displayed as the Caller lD name.
Note: Careful attention needs to be paid because numbers are stored and dialed
differently according to how the area codes are setup.
Example with home area code set as 858
CID‘ received: TT SYSTEMS
8585551234
Phonebook stored as: ALAN ADAMSON
“ 555-1212
The display: ALAN ADAMSON
555-1212
Example #2 with home area code set as 858
CID received: SMITH BARNEY CO
' ‘ 7771231234
ahmebookaomdas BECKYJONES
’ 17771231234
BECKY JONES
777-123-1234
4.2 Caller ID Review Mode - New Call Review
Up to 99 Caller ID Calls can be stored in the handset. If more than 99 calls are
received, the oldest calls are deleted to maintain a total of 99 calls.
1.This list can be reviewed in the on-hook or off—hook mode. So if the user is
engaged in a phone conversation they can still review Caller ID calls and possibly
look for a phone number to give to the person that they are speaking to.
a. New Call Review Option 1 — When the new call LED is flashing
Jan 01
Username
12 New
MEM
12:
Cal
Is
CID
Wednesday
OOAM
b, press the [CID] key , the LCD wiII displayed as
follow:
12
20
New
Total
Calls
Cal
Is
EXI
Q When there are no more new calls the display will show N0 NEW CALLS and
the LED will turn off. If the [CID] key is pressed when there are no new calls the
display will show NO NEW CALLS for 3 seconds,
New
Calls
eview, the[up]l[down] keys can be used
directly to if?
calls The down arrow key will review calls Newest to Oldest (new calls first)
and the up arrow key will review calls Oldest to Newest. If all the new calls are
reviewed in this review mode the New Call LED wi
I turn Off. The first press of
the [CID] key will show the Call Summary Screen. The Call Summary screen Is
also dis layed between the first and last calls in the call list.
12 New Calls
20 Total Calls
EXIT
3. Afterthe Call Summary Screen is displayed the review keys can be used to
review the Caller ID calls in memory as stated above. To see the New Calls first
press the [Down] arrow key.
02:24PM 12/15
858—715-1608
JACKSON GEORGE
Call Opts Exit
“Normal Caller ID record”
858—715-1608
JACKSON GEORGE
Call Opts Exit
02:24PM 12/15 N
“New Caller ID record"
02:24PM12/15 P
858—715-1608
JACKSON GEORGE
Call Opts Exit
“Caller ID with Priority"
02:28PM12/15 R
279-1234
TOMMY SMITH
Call Opts Exit
“ Repeat Call"
02:28PM 12/15
Blocked Call
---- Opts Exit
“Blocked Call"
02:28PM 12/15
No Caller ID
Available
---- Opts Exit
" Out of Area"
4.In the CID review mode if no key is pressed, in 15 seconds the unit will return to
the standby mode, and the display will shows the current clock/calendar:
Jan 01 Wednesday
1 2 : 0 0 A M
N E W C A L L S
MEM CI
Username
12
4.3 Deleting Single Caller ID Records
1. To delete a Caller ID call, press [CID] and then [up]/[down] to scroll the CID
data base between calls to find the particular record to be deleted.
Jan 01 Wednesday
Username 12:00AM
12 New Calls
MEM CID
02:24PM 12/15
858-715—1608
JACKSON
Call Op
GEORGE
ts Exit
“Normal Caller ID record”
2. Press the [Opts] key and the LCD will show next sub menu options.
>I§PRASE CALL?
éaye In PhoneBk
Erase All Calls
Ok Exit
3. Press the [Up]/[Down] key to select“ Erase Call’i
>ERASE CALL?
Save In PhoneBk
Erase All Calls
0k Exit
5. Press [OK] key and the Caller ID call will be deleted and the next call in the list
will be displayed If the last call is deleted the clock/calendar standby screen will be
displayed. The LCD displays:
CaIIeR ID
EraseD
4.4 Delete All Caller ID Records
All Caller ID records (old and new) can be deleted from the call list.
1. In the Caller ID review mode, press the [Opts] key and the LCD will show next
sub menu options.
>Save In PhoneBk
Erase Ali Calls
0k Exit
2. Press the [UM/[Down] key to select“ Erase All Call”.
>Erase All Calls
0k Exit
3. Press the [OK] key and the LCD display will show "Erase All Caller ID?" and
"Are you sure?”
Erase All
CalleR ID
Are You SUre?
Yes No
4,Press [Yes key again to confirm and delete all the Caller lD calls in memory.
5. The following message will be shown for 3 seconds.
All CAlleR ID
EraseD
6. The current clock/calendar standby screen will be displayed
Jan 01 Wednesday
Username 12:00AM
MEM CID
Note: To cancel the Erase All function, Press [No] key.
4.5 Caller ID Dialback
One (1) HOME and Seven (7) Local area codes can be programmed in the user
settings. In many cases only the home Area Code will be needed. However in
areas with 10-digit dialing, one or more local area codes may be needed to dial the
received number back correctly.
Home Area Code Match - Received 10 digit numbers matching the Home area
code should display as 7-digit numbers with the area code “stripped” for correct
dialback. During dialback only the 7—digit number will be dialed. 555-1212
Local Area Code Match - Received 10 digit numbers matching the Local area
codes should display as 10-digit numbers. During dialback the “1” should NOT be
added to the number. This is called 10—digit dialing. 714—555-1212
Home Area & Local Area Code No Match — Received (10 digit) numbers that don’t
match any of the Home or Local Area Codes should be displayed as 10 digit
numbers and dialed back as 11 digit number by adding the “1” prefix to the number.
1714-555-1212
Edit Feature: In addition to Home and Local Area Codes, there is another way to
modify the number to be dialed. When the number is displayed and the [Call] key is
pressed, the display will show the number on the top LCD line and "Dial Number?”
on the bottom LCD line, At this time the [Edit] key can be pressed to change the
number from 7 to 10 to 11 digits as shown in the example below.
1. Press [CID] key and use [up]l[down] keys to review the Caller ID calls in memory
as stated above.
02:24PM 12/15
858~715~1608
JACKSON GEORGE
Call Opts Exit
2. Press [Call] key once.
“Normal Caller [0 record”
Call this nbr?
858-715—1608
JACKSON GEORGE
Call Edit Exit
3.Press [Call] key again to dial the number or press [Exit] to cancel dial back mode.
4. Press [Edit] key to toggle between 7, 10, 11 digits and press [call] again to dial
the displayed number.
5. Press [Exit] to cancel dial back mode and exit to standby mode.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:06:21 09:57:31-04:00
Create Date                     : 2001:06:05 09:10:48-07:00
Creator                         : Acrobat 4.05 Scan Plug-in for Windows
Producer                        : Acrobat 4.05 Scan Plug-in for Windows
Page Count                      : 27
Has XFA                         : No

EXIF Metadata provided by EXIF.tools