Sony Group HCDBX50BTI Compact Disc Receiver with Bluetooth User Manual

Sony Corporation Compact Disc Receiver with Bluetooth 3 293 642 11 1 indb

a href="https://usermanual.wiki/Sony-Group" itemprop="url"> Sony Group >

Manual

© 2008 Sony CorporationCMT-BX50BTiMicro HiFiComponentSystemCMT-BX50BTi.GB.3-293-642-11(1)Operating InstructionsOwner’s RecordThe model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.Model No. ______________  Serial No. ______________3-293-642-11(1)
CMT-BX50BTi.GB.3-293-640-11(1)2GBCMT-  WARNING To reduce the risk of  re or electric shock, do not expose this apparatus to rain or moisture. CAUTION  e use of optical instruments with this product will increase eye hazard. Notice for the customers in the U.S.A  e following CAUTION marking is located on the rear exterior.  is symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of su  cient magnitude to constitute a risk of electric shock to persons.  is symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note to CATV system installer:  is reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, speci es that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations. NOTE:  is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.   ese limits are designed to provide reasonable protection against harmful interference in a residential installation.   is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o  and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.  CAUTYou  armodi this moperat is eqoperatantenn is eqradiatiunconFCC rGuidel is eqenergymaxim(MPE) is eqbe inst20cm apersonhands, NoticOperatwo cocause imust ainterfeoperat is eqexposuequipmIC rad is eqenergymaxim(MPE) is eqbe inst20cm apersonhands,
Download:
Mirror Download [FCC.gov]
Document ID877172
Application IDv6AQx79DQSHs3ATo61q/bA==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize62kB (775011 bits)
Date Submitted2007-12-07 00:00:00
Date Available2008-04-22 00:00:00
Creation Date2007-11-15 15:32:45
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2007-11-28 17:41:09
Document Title3-293-642-11(1).indb
Document CreatorAdobe InDesign CS2 (4.0.4)
Document Author: imx
FCC ID Filing: AK8HCDBX50BTI

Navigation menu