Sony 1130402 Licensed Portable User Manual Exhibit 8

Download:
Mirror Download [FCC.gov]
Document ID	260176
Application ID	t2oy2ncRgHMGoDGn68kWTw==
Document Description	Exhibit 8 User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	177.46kB (2218249 bits)
Date Submitted	2002-07-31 00:00:00
Date Available	2002-07-29 00:00:00
Creation Date	2002-06-14 10:09:16
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2002-06-19 09:44:39
Document Title	Exhibit 8 User Manual

T600TOC.fm Page 1 Wednesday, June 19, 2002 9:42 AM
Contents
Getting started ............................................. 3
Making and receiving calls ......................... 6
Key functions ............................................. 10
Using the menus......................................... 11
Entering letters .......................................... 15
Your personal phone book ....................... 18
Using the call list ....................................... 23
Your voice mail service ............................. 24
Personalising your phone......................... 25
Text and chat messages ........................... 32
Profiles........................................................ 38
Diverting incoming calls ........................... 39
Security for your phone and
subscription ............................................... 40
More than one call ..................................... 44
Setting network preferences .................... 47
Call time and call cost ............................... 48
Using the WAP browser............................. 50
Calendar...................................................... 53
Code memo................................................. 56
Two voice lines ........................................... 57
Calling card calls........................................ 58
Extras .......................................................... 59
Online services........................................... 61
Sony Ericsson Mobile Internet.................. 61
Troubleshooting ......................................... 62
Display icons .............................................. 64
Quick keys .................................................. 66
Technical data............................................. 67
Safe and Efficient Use ............................... 68
Limited Warranty ........................................ 72
Regulatory Information.............................. 75
Index............................................................. 77
T600.book Page 2 Friday, June 14, 2002 10:07 AM
Sony Ericsson T600
First edition (May 2002)
This manual is published by Sony Ericsson Mobile
Communications AB, without any warranty.
Improvements and changes to this manual
necessitated by typographical errors, inaccuracies
of current information, or improvements to
programs and/or equipment, may be made by Sony
Ericsson Mobile Communications AB at any time
and without notice. Such changes will, however, be
incorporated into new editions of this manual.
All rights reserved.
©Sony Ericsson Mobile Communications AB,
2002
Publication number: EN/LZT 108 5866 R1A
Please note:
Some of the services in this manual are not
supported by all networks. This also applies to the
GSM International Emergency Number 112.
Please contact your network operator or service
provider if you are in doubt whether you can use a
particular service or not.
Please read the Guidelines for safe and efficient
use and the Limited warranty chapters before you
use your mobile phone.
T9™ Text Input is a registered trademark of Tegic
Communications.
T9™ Text Input is licensed under one or more of
the following: U.S. Pat. Nos. 5,818,437, 5,953,541,
5,187,480, 5,945,928, and 6,011,554; Canadian
Pat. No. 1,331,057, United Kingdom Pat. No.
2238414B; Hong Kong Standard Pat. No.
HK0940329; Republic of Singapore Pat. No.
51383; Euro. Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and
additional patents are pending world-wide.
Part1.fm Page 3 Friday, June 14, 2002 10:11 AM
Getting started
Front
Back
Strap hole
Internal antenna
Volume
key
Battery cover
Earpiece
Display
Option key
On/off key
Arrow keys
Keypad
Charging
connector
Handsfree
connector
Microphone
Getting started
T600.book Page 4 Friday, June 14, 2002 10:07 AM
About this User’s guide
Some services and functions described in this
User’s guide are service provider- and subscriptiondependent. Because of this, all menus may not be
available in your phone and the shortcut numbers
to menus and functions may vary between phones.
This symbol indicates that a service or
function is network- or service provider
dependent.
Please refer to the information provided
by your service provider for more information about
your subscription.
We recommend that you read the chapter “Using
the menus” on page 11 for information about how to
move through the menus.
The SIM card
When you register as a subscriber with a network
operator, you get a SIM (Subscriber Identity Module)
card. The SIM card contains a computer chip that
keeps track of your phone number, the services
included in your subscription, and your Phone book
information, among other things.
Getting started
SIM cards come in two sizes. One is the size of a
credit card and the other is smaller. Your phone uses
the smaller card. Many credit card-sized SIM cards
have a perforated smaller card that you can take out
easily.
Assembly
Before you can use your phone you need to:
• insert the SIM card.
Note: Always insert the SIM card into the phone
before attaching the battery.
• attach and charge the battery.
Note: Always turn off the phone and detach the
charger before you insert or remove a SIM card.
T600.book Page 5 Friday, June 14, 2002 10:07 AM
SIM card and battery information
It may take up to 30 minutes before an icon
appears in the display when charging.
1. Slide the SIM card into the slot, under the silvery
holder, with the golden connectors facing down and
the cut corner to the left. (To remove the SIM card,
just slide it out the same way.)
2. Place the battery on the back into the back of the
phone, with the golden connectors facing down,
and push down until it clicks into place.
3. Slide the battery cover upwards from the bottom
of the phone into place as shown in the picture.
4. Connect the charger to the phone at the flash symbol.
The flash symbol on the charger plug must face
upwards.
5. It may take up to 30 minutes before the battery
charging icon appears in the display.
6. Wait approximately 4 hours or until the icon
indicates that the battery is fully charged.
7. Remove the charger by tilting the plug upwards.
Note: To remove the battery cover, press the top
centre of the cover and slide downwards.
Getting started
T600.book Page 6 Friday, June 14, 2002 10:07 AM
Making and receiving calls
Turning your phone on
1. Press and hold NO until you hear a tone.
2. Enter your PIN (Personal Identity Number), if you
have one for your SIM card. Your PIN is provided
by your network operator.
If you make a mistake while entering your PIN,
delete the wrong number by pressing
3. Press YES.
On/off
If you enter your PIN incorrectly 3 times in a row
then the SIM card is blocked. See “The SIM card
lock” on page 42.
Network search
After you have turned on the phone (and entered your
PIN), the phone searches for a network. When a
network is found, the phone beeps three times. This
is called “standby mode”. You can now make and
receive calls.
Turning your phone off
• In standby mode, press and hold NO until you hear
a tone.
Making a call
1. Enter the area code and phone number.
If you make a mistake while entering the number,
delete the wrong number by pressing
2. Press YES.
Press NO to end the call.
Note: The Ongoing call menu is displayed when
is pressed during a call.
Making and receiving calls
T600.book Page 7 Friday, June 14, 2002 10:07 AM
Changing the earpiece volume
During a call you can change the earpiece volume by
sliding the volume key on the side of the phone.
• Slide the key upwards to increase the volume.
• Slide the key downwards to decrease the volume.
• until the call is answered.
• until you press a key or receive a call.
Turning off the microphone
During a call you can turn off the microphone.
• Press and hold
• Press
to resume the conversation.
Making international calls
1. Press and hold the
key until a + sign appears.
The + replaces the international prefix number of the
country from which you are calling.
2. Enter the country code, area code (without the
leading zero) and phone number. Press YES.
Re-dialling a previously called number
The Call list contains numbers that you have dialled,
answered or missed.
To re-dial a previously called number
1. Press YES from standby mode to enter the Call list.
2. Press
or
to scroll through the list.
3. When the number you want to call is highlighted,
press YES to make the call.
Automatic re-dialling
If a connection failed, and the display shows Retry?,
you can re-dial the number by pressing YES. Your
phone automatically re-dials (up to 10 times):
Note: Automatic re-dialling is not available for
data calls.
Making emergency calls
1. Enter 112 (the international emergency number).
2. Press YES.
Your Sony Ericsson phone supports the international
emergency numbers, 112, 911 and 08. This means
that it can normally be used to initiate an emergency
call in any country, with or without a SIM card
inserted, if a GSM network is within range.
Making and receiving calls
T600.book Page 8 Friday, June 14, 2002 10:07 AM
Note: Some service providers may require that a
SIM card is inserted, and in some cases that the PIN
has been entered as well.
Emergency numbers
Some countries may not promote the
international emergency number, 112. Your
operator may therefore have stored additional
local emergency numbers on the SIM card.
To use another emergency number
1. Press
to go to the Phone book menu.
2. Press YES to select the menu.
3. Press
until Special numbers is highlighted, then
press YES.
4. Press
until SOS numbers is highlighted, then
press YES.
5. Press
or
to go to the number you want,
then press YES to make the call.
Receiving calls
When you receive a call, the phone rings and the
display shows Answer?
Tip: Press
signal.
when the phone rings to mute
Making and receiving calls
If your subscription includes the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is shown in
the display. If you have saved the caller’s name
and number in the phone book, the caller’s name is
displayed. If the network does not send the number,
the display shows Withheld.
Answering a call
• Press YES to answer a call.
Rejecting a call
• Press NO , or
• slide the volume key on the side of the phone either
upwards or downwards twice.
The caller hears a busy tone if this is supported by
the caller’s network. If “Divert calls when busy” is on,
the call is diverted to the number you have specified.
See “Diverting incoming calls” on page 41.
The notepad
You can use the phone to make a note of a phone
number during a call. Use the number keys to enter
the number. When you end the call, the number
remains in the display.
T600.book Page 9 Friday, June 14, 2002 10:07 AM
When you enter the number, the person at the
other end can hear the tones. You can turn the tones
off (can only be done during a call).
To turn the tone signals off during a call
1. Press
2. Scroll to Turn off tones and press YES.
Showing and hiding your phone
number
You can choose to show or hide your
number for a particular call, if this service is
supported by your subscription.
Sending touch tone signals
To use telephone banking or to control an answering
machine, you need to use codes. These codes are sent
as touch tone signals (also known as DTMF - Dual
Tone Multiple Frequency tones). If you press
and
during a call, these numbers
and characters are sent as tone signals. You can save
codes in your phone book and during a call, go to the
phone book by pressing
, find the entry in the
phone book and press
, and Send as DTMF.
See also “Touch tone services” on page 22.
To hide or show your phone number
1. Enter the phone number you wish to call.
2. Press
3. Scroll to Hide My Number or Show My Number and
press YES to make the call.
Making and receiving calls
T600.book Page 10 Friday, June 14, 2002 10:07 AM
Key functions
The table below shows some examples of the key
functions. See also “Quick keys” on page 68.
Key
Use
YES
To make calls and answer calls.
To select a menu or setting.
NO
To turn the phone on or off, press and
hold the key.
To end a call.
To reject a call.
To go back one level in the menus,
to leave a setting unchanged.
To go back to standby mode, press
and hold NO.
and
To move (scroll) through menus, lists
and text.
(Clear) To delete numbers and letters from the
display.
To delete an item from a list.
To turn off the microphone during a
call, press and hold the key.
10
Key functions
Key
Use
, To enter the digits 0-9.
Press and hold 0 to enter the
international prefix +.
To enter letters.
To move through menus using
shortcuts.
To enter *.
To shift between upper- and
lower-case letters.
(Hash) To enter #.
Volume key
To increase or decrease the volume of
the earpiece during a call.
To reject an incoming call, slide either
upwards or downwards twice.
To scroll through menus, lists and text.
To enter the Status menu.
Option key
The option key,
gives you the most common
options for the function you are using. You can also
select Exit to standby and the Help function for menus.
T600.book Page 11 Friday, June 14, 2002 10:07 AM
Using the menus
There are seven main menus. Each menu has several
sub-menus, where you find the different functions.
Moving through the menus
There are two ways of moving through the menus:
• Scrolling with the
and
• Using shortcuts
Press... to...
scroll left or up through the menus.
scroll right or down through the menus.
YES
select a menu, sub-menu or a setting.
NO
go back one level in the menus, leave a
setting unchanged.
press and hold NO to go back to standby.
enter optional menus
Using shortcuts
A quicker way to move through the menus is to use
shortcuts. Enter the menus by pressing
or
and then simply enter the number of the menu to
which you want to go.
How to interpret the instructions
In this example we are going to set the key sound to
the tone option.
To set the key sound
1. Scroll to Settings, YES , Sounds & alerts, YES , Key
sound, YES.
2. Select Tone and press YES.
Interpret the instructions as follows:
1. From standby, press
or
to scroll to the
Settings menu.
2. Press YES to select the Settings menu. The name of
the menu that you have chosen is shown at the top of
the display (Settings).
3. Press YES to select the Sounds & alerts sub-menu.
4. Press
or
to scroll to the Key sound
sub-menu and press YES to select it.
5. Press
or
to scroll to the Tone option and
press YES to select it. You have now set the key sound
to tones.
6. Press and hold NO to go back to standby.
Shortcuts
This is how to interpret the instructions above by
using shortcuts:
Using the menus
11
T600.book Page 12 Friday, June 14, 2002 10:07 AM
To set the key sound
1. Press
or
to enter the main menu.
2. Press
to select the Settings menu.
3. Press
to select the Sounds & alerts sub-menu.
4. Press
to select the Key sound sub-menu.
5. Press
or
to scroll to Tone.
6. Press YES to select the tone option.
7. To go back to standby, press and hold NO.
Tip: To check a setting without changing it: scroll to
the setting and leave it unchanged by pressing NO.
Display text
• Text at the top indicates the menu you have chosen.
• A text that is highlighted shows your position in the
menu. If you press YES , you enter this menu or select
this option.
• Grey text indicates a function that is temporarily
unavailable, for example due to your subscription or
due to a certain setting which has not been turned on.
• A filled button indicates that this option is selected.
• A tick indicates that this item is selected.
12
Using the menus
Help texts
Your phone has pop-up help texts that explain the
sub-menus.
To turn the help texts on or off
1. Scroll to Settings, YES , Display, YES, Menu help.
2. Select On or Off and press YES.
Menu language
Most SIM cards automatically set the display
language to the language of the country where you
bought your SIM card, Automatic. If this is not the
case, the pre-set language is English.
To change the display language
1. Scroll to Settings, YES , Language, YES, Menus, YES.
2. Select a language and press YES .
Note: You can always choose Automatic by pressing
8888
in standby, and English by pressing
0000
in standby.
T600.book Page 13 Friday, June 14, 2002 10:07 AM
My shortcuts
You can place your favourite functions in the menu
My shortcuts to quickly and easily reach the functions
you use most.
To add a function to My shortcuts
1. Scroll to My shortcuts, YES, Edit shortcuts, YES.
2. Select a function from the list by pressing
3. Press YES to confirm.
To change the position of the shortcut item.
1. Select a function from My shortcuts list.
2. Press
and scroll to Move up or Move down.
Press YES.
3. Repeat steps 1 & 2 until the item is in the desired
position.
Using the menus
13
T600.book Page 14 Friday, June 14, 2002 10:07 AM
Menu overview
Network
12:18
Phone book
Messages
Call info
Settings
Extras
WAP services
My shortcuts
Find
Add number
Business cards
Groups
Calling cards
Options
Memory status
Special numbers
Send new
Inbox
Chat
Unsent
Sent items
Call voice mail
Templates
Options
Missed calls
Call list
Call costs
Call timers
Options
Sounds & alerts
Profiles
Call options
Networks
Display
Language
Time and date
Locks
Handsfree
Master reset
Calendar
Time
Pictures
Code memo
Calculator
Games
Mobile Internet
Bookmarks
Enter address
Resume
Select profile
Clear cache
WAP settings
Certificates
Mobile Internet
Turn on keylock
Send new
New chat
Pictures
My numbers
Edit shortcuts
Please note that this overview shows
all the possible menu alternatives in
your phone. Many of the alternatives
are network and subscription
dependent.
14
Using the menus
Ongoing call
Turn off tones*
Hold call*
Switch calls*
Release active*
Retrieve call*
Join calls*
Transfer call*
Parties in conf*
Mute mic*
Store number?*
Release all*
Extract part*
Release part*
The Ongoing call menu is activated
by pressing
during a call.
* Only available during a call.
T600.book Page 15 Friday, June 14, 2002 10:07 AM
Entering letters
You can enter letters when you add names to the
phone book, write text messages (SMS) or enter
WAP addresses.
Your phone also has a function called T9™ Text
Input (predictive text input) for long texts such as
text messages, if the input language you select
supports this. T9™ Text Input is a quicker way to
write texts. See “Writing using T9™ Text Input”
on page 17.
Input modes
You can select the input mode that you want to use
when writing.
To select input modes
1. Scroll to Settings, YES, Language, YES, Input, YES .
2. Scroll to the alphabets (input modes) that you want to
use for entering letters and press
. Repeat step 2
if you want to use another input mode.
3. Press YES to leave the menu.
When writing you can switch to another input mode
by pressing
and then select Input. See “The list
of options” on page 16.
T9™ Text Input
T9™ Text Input is on by default. If you wish, you can
turn off the T9™ Text Input.
To turn the T9™ Text Input on or off
1. Scroll to Settings, YES , Language, YES , T9 options,
YES, T9 in use, YES.
2. Select On or Off.
See the table of the Latin alphabet below for key
functions when writing without T9™ Text Input.
Press…
to get…
Space 1
ABCÅÄÆàÇ2Γ
DEFèÉ3∆Φ
GHIì4
JKL5Λ
MNOÑÖØò6
PQRSß7ΠΣς
TUVÜù8
Entering letters
15
T600.book Page 16 Friday, June 14, 2002 10:07 AM
Press…
to get…
WXYZ9
0+ΘΞΨΩ
.‚!?:;"()+-*/#
to delete a letter or number
to shift between capital, initial upper-case,
lower-case, case letters and numbers
•
•
•
press and hold to enter numbers
press and hold to Add symbol menu
move cursor back
move cursor forward
Volume + go up one line
Volume -
go down one line
Example:
• To enter an ‘A’, press
once.
• To enter a ‘B’, quickly press
twice.
• To enter lower-case letters, press
three times
and then enter the letter, for example an ‘a’.
16
Entering letters
•
The list of options
If you press
when writing text messages, you
enter a list of options:
Ins. picture - for SMS only
This option allows you to insert a picture.
Insert melody - for SMS only
This option allows you to insert a melody.
Edit word - for T9™ Text Input only.
If you want to delete the complete word, press and
hold
. If you do not want to delete the complete
word, but edit it letter by letter, move the cursor by
using
or
and then delete letters by pressing
. Enter letters by pressing the appropriate key the
number of times needed until you get the letter you
want. When you are finished, press YES.
Add symbol
Symbols such as ! and ? are shown.
Move between the symbols by using the keys
= move up
• Volume + or
•
or
= move left
•
or
= move right
= move down
• Volume - or
Press YES to select a symbol.
T600.book Page 17 Friday, June 14, 2002 10:07 AM
• Input
If you want to change the input mode for the text you
are writing, scroll to an input mode and press YES.
• Candidates (0) - for T9™ Text Input only
A list of alternative words is shown. Scroll to a word
and press YES.
• Dictionary - for T9™ Text Input only
If you want to change the language for the text you
are writing, scroll to a language and press YES .
• Reply request - for SMS only
You can turn on the reply request option. When you
send a message, you are asked whether you want the
recipient to reply or not.
• Message type - for SMS only
You can select how you want your text message to
be interpreted by the receiver.
• Status request
Check if a message has been delivered.
• Send - for SMS only
This option will send the message.
• Help - for T9™ Text Input only
Explains T9™ Text Input
• Exit to standby
Exit to standby.
Writing using T9™ Text Input
The T9™ Text Input method uses a built-in dictionary
to recognise the most commonly used word for a
sequence of key presses. This way, you can press
each key only once, even if the letter you want is not
the first letter on the key.
Note: Keys
have the same function
as when writing without T9™ Text Input.
To enter letters using T9™ Text Input
1. Scroll to Messages, YES , Send new, YES .
2. Press
The word “Jane” appears.
If the word shown is the one you want:
•press
to accept and add a space.
If the word shown is not the one you want:
•press
to view alternative words. Accept a
word and add a space by pressing
If you do not find the word you want by pressing
•press
to view the options menu. Select Edit
word. Edit the word and press YES. The word is
added to the dictionary.
3. Continue writing your message. See also “Text and
chat messages” on page 33.
Entering letters
17
T600.book Page 18 Friday, June 14, 2002 10:07 AM
Tip: Press
to enter a full stop. To enter other
punctuation marks, press and hold
checks the next candidate for the suggested word.
Accept by pressing
. Press and hold
to
select T9™ Text Input on/off.
Your personal phone book
Your phone has a phone book in which you can save
numbers and accompanying names (an entry).
To save a number together with a name
1. Scroll to Phone book, YES, Add number, YES .
2. Select Add new? or any of the numbers from the
list by pressing YES.
3. Enter the phone number that you want to save and
press YES .
4. Enter a name that you want to associate with the
phone number and press YES.
5. Press YES again to save the entry in the suggested
position.
To call a number saved in the phone book
1. Press and hold
until the Find menu appears.
2. Enter the name (or the first few letters of the name)
associated with the number that you want to call and
press YES .
If the name displayed is not the one you want, press
or
until you find the correct name and
number.
3. Press YES to make the call.
18
Your personal phone book
T600.book Page 19 Friday, June 14, 2002 10:07 AM
Shortcuts to phone book entries
You can call the phone numbers that you have saved
in positions 1–9 by entering the position number in
standby, and then pressing YES.
When in standby, you can find an entry by pressing
and holding one of the keys
–
to find an
entry beginning with the first letter on that key, or the
closest following. For example, press and hold
to get to the first entry beginning with the letter “G”
(or the closest following). Press
again to get to
the first entry beginning with “H” and so on. When you
find the entry you want, press YES to make the call.
Ask to save
If Ask to save is on, you are asked if you want to save
any called or answered number that is not already
saved in your phone book.
To turn the Ask to save function on or off
1. Scroll to Phone Book, YES , Options, YES, Ask to save,
YES .
2. Select On or Off and press YES .
Note: Your subscription must support the Calling
Line Identification Service, if you want to save
answered numbers.
Keeping the phone book up to date
You can change and delete names and numbers from
the phone book.
To edit an entry
1. Scroll to Phone book, YES, Find, YES .
2. Enter the name (or the first few letters) for the entry
that you wish to edit and press YES.
3. Press
4. Select Edit and press YES .
5. When you have finished editing, press YES to save
your changes.
To delete an entry from the phone book
1. Scroll to Phone book, YES, Find, YES .
2. Enter the name (or the first few letters) for the entry
that you wish to edit and press YES.
3. When the entry you want to delete is highlighted,
press
4. Press YES to confirm.
Your personal phone book
19
T600.book Page 20 Friday, June 14, 2002 10:07 AM
Sort order
Your phone book entries can be sorted according to
their position number or the name.
To choose a sort order
1. Scroll to Phone book, YES , Options, YES, Sort order,
YES .
2. Select a sort order and press YES .
Phone book memories
Your phone book entries are saved in the memory
on your SIM card.
You can also save your entries in the phone memory.
The phone memory holds 250 positions in which
your entries are saved when all SIM positions are
occupied.
You can check how many memory positions you
have in your memories and how many of them you
have used.
To check the status of the memories
• Scroll to Phone book, YES , Memory status, YES .
20
Your personal phone book
Choosing where to save an entry
When you save an entry and are asked to enter
the position number, you can do the following:
• To save the number in the first empty position
suggested, press YES .
• To save the number in another position, press
to delete the position number, enter a new position
number and press YES .
• To save the number in the phone memory, you first
need to know how many positions you have got on
your SIM card. You can check this in the Memory
status menu. If, for example, you have 250 positions
on your SIM card, you can enter position number
251 to save a number in the first position of the
phone memory.
Tip: Press
to move a selected contact to
another position, or to select “Card memory” or
“Phone memory”.
Overwrite protection
If you try to save a phone number in a position which
already contains a phone number, the message
Overwrite? appears together with the name saved in
that position. You now have two options:
T600.book Page 21 Friday, June 14, 2002 10:07 AM
• Press YES to replace the number with the new one.
• Press NO if you do not want to replace the old
number. Enter a new position and press YES .
You can delete entries saved in the phone memory.
To delete all entries from the phone memory
1. Scroll to Phone book, YES , Options, YES, Delete all,
YES .
2. Press YES again.
3. Enter the phone lock code (0000 or another one that
you have chosen yourself, see “The phone lock”
on page 43), and press YES.
Note: The entries on your SIM card are not deleted.
Groups
You can create a group of phone book entries. You
can then send a text message to all members of that
group at the same time. See “Text and chat messages”
on page 33.
To create a new group
1. Scroll to Phone book, YES, Groups, YES , Add new?,
YES.
2. Enter a name for the group and press YES.
3. Scroll to Add new? and press YES.
4. Select an entry in your phone book and press YES .
5. To add the next member, repeat steps 3 and 4.
6. Press NO to leave the menu.
To add a member to an existing group.
1. Select a group and press YES.
2. Select Add new? and press YES.
3. Select an entry in your phone book and press YES .
Business cards
You can add your own business card as an entry in
the phone book. You can then exchange business
cards via SMS.
To send your own business card
1. Scroll to Phone book, YES, Business cards, YES .
2. Select Send my own and press YES.
3. Enter the recipient’s phone number and press YES.
Press
to recall a number from the phone book.
4. Press YES to send.
Your personal phone book
21
T600.book Page 22 Friday, June 14, 2002 10:07 AM
To edit your own business card
1. Scroll to Phone book, YES , Business cards, YES, Edit
my card, YES.
2. Edit your own phone number, press YES, edit your
name and press YES again.
To save a received business card
1. When you have received a business card the display
shows Save received business card?.
2. Press YES to accept the number, name and position
and it will be stored in the phone book.
Tip: You can edit the number, name and position
in the phone book of the business card.
Touch tone services
In your phone book, you can save a phone number
together with tone signals and codes. When you call
this entry, the phone number and all the tone signal
codes are then dialled automatically.
Note: Saving personal codes in the phone book
involves a risk if your phone is stolen. It is safer to
save personal codes in the Code memo. See “Code
memo” on page 57.
22
Your personal phone book
To save a phone number together with tone
signals and codes
1. Scroll to Phone book, YES, Add number, YES .
2. After entering the phone number, press and hold
until the pause character P appears in the display.
Enter the code, then if needed, enter another pause,
another code and so on.
3. Enter the name that you want to associate with the
phone number and code and press YES .
4. Press YES to save.
Copying from one SIM card to another
You can copy your phone book entries on one SIM
card to another, via the phone’s memory.
If your phone memory contains phone book entries
that you wish to keep, you first need to copy these
entries from the phone memory to a SIM card,
otherwise they will be deleted.
Note: You can only copy 250 items at a time. Check
your phone memory and your SIM card memory
before you start copying, to make sure that you do
not delete entries you want to keep.
T600.book Page 23 Friday, June 14, 2002 10:07 AM
To copy from a SIM card to the phone memory
1. Insert a SIM card.
2. Scroll to Phone book, YES , Options, YES, Copy, YES,
Copy from card, YES.
3. Enter from which position number on the SIM card
you want to start copying and press YES.
4. Press YES again to start copying.
Wait until the display shows Phone book entries
copied:.
To copy from the phone memory to a SIM card
1. Insert a SIM card.
2. Scroll to Phone book, YES , Options, YES, Copy, YES,
Copy to card, YES.
3. Enter the position number of your SIM card where
you want to start saving your entries and press YES .
4. Press YES again to start copying.
Wait until the display shows Phone book entries
copied:.
Using the call list
The Call list saves the last 30 incoming, outgoing
and missed calls.
The calls are saved in chronological order, except
for the last dialled number, which is always displayed
in the first position. If you check a call within 24 hours,
the time of the call is displayed. Otherwise, the time
is replaced by the date.
If the incoming call is a restricted number, the
display shows Unknown.
To call a number from the call list
1. Press YES when the phone is in standby mode.
2. Select the number you want to call and press YES.
• press
and select Edit bef. call to edit the
number before calling.
Tip: You can also select the Call list from the Call
info menu.
To clear the call list, scroll to Call info, YES, Options,
Clear call list, YES.
YES,
Using the call list
23
T600.book Page 24 Friday, June 14, 2002 10:07 AM
To turn the call list on or off
1. Scroll to Call info, YES, Options, YES, Set call list, YES.
2. Select On or Off and press YES .
If you turn off the list, it is cleared.
Missed calls
If you have missed a call, the message Missed calls:1
appears in standby mode. (The number indicates the
number of missed calls.)
To check your missed calls
1. Press YES to display the missed calls.
2. Select a number and press YES to call the number.
Press NO if you do not want to check your missed
calls now.
Your voice mail service
The answering service of your service
provider allows callers to leave a voice
message when you cannot answer your
calls. You are informed about the voice
message via a text message or by a specific voice
mail indication.
Using your voice mail service
You can save the number to your voice mail service.
To save your voice mail number
1. Scroll to Messages, YES , Options, YES, Voice mail
no., YES .
2. Enter your voice mail number and press YES .
To call your voice mail service
• Press and hold
from standby.
Receiving a voice mail
When you receive a voice mail, your phone beeps
and the message New voice mail appears in the
display. Press YES to listen to the voice mail.
If you want to listen to it later, press NO .
24
Your voice mail service
T600.book Page 25 Friday, June 14, 2002 10:07 AM
Personalising your phone
You can adjust the phone settings to suit your own
requirements.
Ring signals
You can specify the ring signal volume, choose
among different ring signals or compose your own.
Ring signal volume
The ring signal volume can be set to six levels. You
can also turn the ring signal off (0).
To set the ring signal volume
1. Scroll to Settings, YES, Sounds & alerts, YES, Ring
volume, YES.
2. Press
or
to decrease or increase the volume.
3. Press YES to save the setting.
Tip: Use the volume key on the side of the phone to
change the volume silently.
To turn the ring signal on or off
1. From standby, press and hold
2. Press YES.
All signals except the alarm and timer signals are
turned off.
To cancel, repeat step1 and press YES .
Increasing ring
You can choose a ring signal that rises in steps from
the lowest volume to the highest.
• Scroll to Settings, YES , Sounds & alerts, YES ,
Increasing ring, YES. Select On and press YES.
Ring signal type
You can choose a ring signal from a list of different
sounds and melodies.
To choose a ring signal
1. Scroll to Settings, YES , Sounds & alerts, YES , Ring
signals, YES, Calls, YES.
2. Select a ring signal and press YES.
Tip: Use the volume key on the side of the phone
to scroll silently.
Personalising your phone
25
T600.book Page 26 Friday, June 14, 2002 10:07 AM
Specific ring signals for personal calls
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a
personal ring signal to up to ten callers, or to a group
of callers.
If the last seven digits of a caller’s number
correspond to a number you have specified, then that
caller’s ring signal is used.
You can include question marks in a phone number.
For example, 012345??? means that calls from phone
numbers between 012345000 and 012345999 will
have the same personal ring signal. Press and hold
to insert a question mark.
To set a specific ring signal for a caller
1. Scroll to Settings, YES, Sounds & alerts, YES, Ring
signals, YES, Personal rings, YES , Add new?, YES.
2. Enter the caller’s number and press YES.
Press
to recall a number from the phone book.
3. Select a ring signal and press YES .
26
Personalising your phone
To set a specific ring signal for a defined group
of callers
1. Scroll to Settings, YES , Sounds & alerts, YES, Ring
signals, YES, Personal rings, YES, Add new?, YES.
2. Press
to recall a defined group from the phone
book.
3. Select a ring signal and press YES.
Composing your own ring signal
The melody editor enables you to compose your own
ring signals.
To edit or compose a ring signal
1. Scroll to Settings, YES , Sounds & alerts, YES, My
melodies, YES.
2. Select one of the melodies and press YES.
3. Select Edit and press YES .
4. Use the keypad to enter a note.
• To add a new note move the
cursor using
to the dotted
frame and press the keypad.
• When a note is entered you can
change the note in the
following ways:
•press
to change up
one note.
•press
to change down one note.
T600.book Page 27 Friday, June 14, 2002 10:07 AM
•press
•press
•press
•press
•press
•press
•press
•press
note.
•press
•press
to increase the octave.
to decrease the octave.
to change to a longer note.
to change to a shorter note.
to change to a flat or sharp note.
to turn the vibration on or off.
to change the duration specifier.
to add a new note above the current
to increase or decrease the volume.
to delete the selected note.
• Scroll using
or
from one note to the next.
The highlighted line on the display shows which note
is selected.
5. Press YES to listen to the melody.
6. Press YES again to save the melody or NO to continue
editing the melody.
Tip: You can play a melody from the
menu.
To create a repeat block of notes
1. Select the starting note of the repeat and press
2. Select the ending note of the repeat and press
3. Press
to change the repeat count 1-9 times, or
to continually repeat.
Tip: You can add repeat blocks from the
menu.
To set the volume, beat and style for a melody
1. Scroll to Settings, YES , Sounds & alerts, YES , My
melodies, YES.
2. Select a melody and press YES .
3. Select a setting and press YES .
• Set volume, to decrease or increase the volume.
• Set beat, to decrease or increase the beats per minute.
• Set style, to select a style.
4. Enter your setting and press YES to save the setting.
Note: The volume of the melody is dependent upon
the main volume settings.
To edit the melody name and composer
1. Select the melody to edit from the Settings/Sounds &
alerts/My melodies menu and press YES .
2. Scroll and select Melody info and press YES.
• Press YES once to edit the melody name.
• Press YES twice to edit the composer name.
3. Enter a new name and press YES.
Tip: Press
when in the Melody info menu to
edit the melody name and composer name.
Personalising your phone
27
T600.book Page 28 Friday, June 14, 2002 10:07 AM
Vibrating alert
You can choose to be notified of an incoming call by
the buzzing of the Vibrating alert. You can set the
phone’s Vibrating alert to one of the following:
• On (all the time)
• On if silent (on when the ringing volume is turned
off or when you have set the phone to silent)
• Off (all the time)
Note: When your phone is attached to a charger,
the Vibrating alert is turned off automatically.
To set the Vibrating alert
1. Scroll to Settings, YES, Sounds & alerts, YES,
Vibrating alert, YES.
2. Select the setting you want, and then press YES.
Message signal
You can set the message signal.
• Scroll to Settings, YES, Sounds & alerts, YES,
Message alert, YES and select the signal you want.
You can also set a personal message signal for a
defined group in your phone book.
28
Personalising your phone
• Scroll to Settings,YES , Sounds & alerts, YES , Message
alert, YES, Personal rings, YES and select the signal
you want.
• Press
to select a defined group from the
phone book.
Pictures
Your phone contains pictures which can be edited
and saved as new pictures in My pictures. The
pictures can be inserted in a text message, see “To
insert a picture in a text message” on page 33.
You can delete pictures from My pictures and My
favourites, but you cannot delete the original pictures
that were in the phone when you bought it.
To edit and save a picture in your phone
1. Scroll to Extras, YES , Pictures, YES.
2. Select a picture group and press YES.
3. Press
and
to scroll through the pictures.
Select a picture and press YES to view the editing
tools. You can now start to edit the picture.
4. Press
to view the Options menu.
5. Select Save and press YES . The picture is saved in
My pictures.
T600.book Page 29 Friday, June 14, 2002 10:07 AM
How to use the keys when editing a picture.
Key
Key
Use
Use
Switch between black and white pen colour.
Move the cursor up and left.
Brings up the Options menu.
Move the cursor up.
Move the cursor up and right.
Move the cursor left.
Lift up, or put down the pen.
Press and hold to switch between zoom and
full size view.
Move the cursor right.
Move the cursor down and left.
Move the cursor down.
Move the cursor down and right.
Switch line thickness.
YES
Save the picture.
NO
Quit the picture editor.
Clear the picture.
Move the cursor 1, 5 or 10 spaces.
To save a picture in My favourites
1. Scroll to Extras, YES , Pictures, YES.
2. Select a picture group and press YES.
3. Select a picture and press
4. Select My favourites and press YES.
To delete a picture from My favourites
1. Select a picture from My favourites and press
2. Press YES to delete the picture.
To install a background picture
1. Scroll to Extras, YES , Pictures, YES.
2. Select a picture group and press YES.
3. Select a picture and press
4. Select Inst. picture and press YES.
You can turn the background picture on or off.
• Select Background from the Settings/Display menu
and select On or Off.
Personalising your phone
29
T600.book Page 30 Friday, June 14, 2002 10:07 AM
Key sound
You can set the key sound to clicks, tones or silent.
• Select Key sound from the Settings/Sounds & alerts
menu and then select the key sound you want.
Minute minder
If you turn on the minute minder, you hear a beep once
every minute during a call.
• Select Minute minder from the Call info/Call timers
menu and then select On or Off.
Display light
The display light can be set to automatic, off or on.
In automatic mode, the display light is turned off
25 seconds after you press the last key.
• Select Light from the Settings/Display menu, and
then select the alternative you want.
The keypad lock
The keypad lock feature helps you to avoid accidental
dialling. The keypad remains locked until you:
• answer an incoming call
• unlock the keypad
• receive an SMS.
30
Personalising your phone
Note: You can call the international emergency
number 112 even if the keypad is locked.
To lock the keypad manually
1. Press
in standby.
2. Select Turn on keylock and press YES.
To unlock the keypad
1. Press
2. Select Turn off keylock? and press YES.
Automatic keylock means that if no keys are pressed
after 25 seconds, the keypad will be locked.
To turn the automatic keylock on or off
1. Scroll to Settings, YES, Locks, YES, Auto keylock, YES .
2. Select On or Off and press YES.
Time and date
The time is always displayed in standby mode.
To set the time
1. Scroll to Settings, YES , Time and date, YES , Set time,
YES.
2. Enter the time and press YES .
T600.book Page 31 Friday, June 14, 2002 10:07 AM
To choose a 12-hour or a 24 hour clock, scroll to
Settings, YES, Time and date, YES, Time settings, YES
and then select the time format you want. If you select
the 12-hour clock, you can alternate between am and
pm by pressing
To select answering mode
1. Scroll to Settings, YES , Handsfree, YES, Answering
mode, YES .
2. Select an answering mode and press YES .
Date
When the phone is in standby mode, you can slide
the volume key to see today’s date.
Greeting text
When you turn your phone on or off, a greeting
appears in the display. If you want to interrupt the
greeting, you can press the NO key.
To set the date
1. Scroll to Settings, YES, Time and date, YES, Set date,
YES .
2. Enter the date (two digits), month and year and then
press YES.
To select a greeting
1. Scroll to Settings, YES , Display, YES, User greeting,
YES.
2. Select a greeting and press YES.
You can also turn off the greeting by selecting Off.
To select another date format, scroll to Settings, YES ,
Time and date, YES , Date format, YES , and then select
the date format you want.
Answering mode
When using a portable handsfree, you can choose to
answer a call by pressing any key (except NO ) or set
the phone to answer the call automatically.
Phone number display
To check your own phone number, scroll to Settings,
YES, Display, YES , My numbers, YES. If your number
is not stored on your SIM card, you can enter it
yourself.
Personalising your phone
31
T600.book Page 32 Friday, June 14, 2002 10:07 AM
Master reset
You can reset the phone settings to the way they were
when you bought your phone.
To reset the phone
1. Scroll to Settings, YES, Master reset, YES.
2. Enter the phone lock code (0000 or the new code if
you have changed it) and press YES .
Text and chat messages
You can use the Short Message Service
(SMS) to send and receive text messages.
If the number to your service centre is not
stored on your SIM card, you must specify
the number yourself. This also applies to chat
messages. See “Mobile chat” on page 35.
Note: The number to your service centre is provided
by your service provider.
To check the number to your service centre
1. Scroll to Messages, YES , Options, YES, Service
centres, YES.
If no number is found, select Add new? and press YES.
2. Enter the number, including the international + sign
and country code, and press YES .
Sending a text message
You can send a text message and insert pictures and
melodies in it. When you send messages containing
pictures and melodies, you use the Long Messages
function. See “Long messages” on page 37.
32
Text and chat messages
T600.book Page 33 Friday, June 14, 2002 10:07 AM
To send a text message
1. Scroll to Messages, YES, Send new, YES.
2. Enter your message and press YES.
See “Entering letters” on page 15.
3. Enter the recipient’s phone number or recall it from
the phone book by pressing
4. Press YES to send the message.
Tip: You can also press
from the phone book.
to recall a number
If you want to send the message later, press NO when
you are asked to enter the phone number. The message
is saved in the Unsent list.
To insert a picture in a text message
1. Scroll to Messages, YES, Send new, YES.
2. While entering your message, press
3. Select Ins. picture and press YES.
4. Select one of the picture groups and press YES.
5. Select the picture you want to insert and press YES.
To insert a melody in a text message
1. Scroll to Messages, YES , Send new, YES .
2. While entering your message, press
3. Select Insert melody and press YES.
4. Select the melody you want to insert and press YES .
Sending a text message to a group
You can send text messages to a group that you have
specified and saved in your phone book, see “Groups”
on page 21.
To send a text message to a group
1. Follow steps 1 & 2 of “To send a text message”.
2. Press
, select Groups and press YES .
3. Select a group and press YES.
Note: You will be charged for each group member.
Receiving a message
When you receive a message, the phone beeps, and
the message New message Read now? appears in
the display.
Text and chat messages
33
T600.book Page 34 Friday, June 14, 2002 10:07 AM
To read the message
1. Press YES.
Press NO if you want to read the message later. The
message is saved in your Inbox in the Message menu.
2. Press
or
to scroll through the message.
An arrow in the bottom right corner of the display
indicates that there is more text in the message.
3. When you have read the message, press YES. A menu
with different options appears. Select
• Reply to reply to a message.
• Forward to forward a message.
• Delete to delete the message.
• Save to save the message.
• Call to call the sender of the message.
• Chat to chat with the sender of the message.
• Numbers to call or save a phone number found in the
message.
• Read next to read the next message.
Tip: If you select a message in the Inbox and press
, you can see the list of options.
If the sender of the message wants you to reply, the
message “Reply request Reply?” appears in the display.
Press YES again to reply. If you do not want to reply,
press NO.
34
Text and chat messages
To save a picture found in a message
1. When the picture is highlighted, press
2. Select Save picture and press YES.
The picture is saved in My pictures in the Pictures
menu.
To save a melody found in a message
1. When the melody icon is highlighted, press
2. Select Save melody and press YES .
3. Scroll to the position where you want to save the
melody within My melodies and press YES.
Note: To set the saved melody as a ring signal,
see“To choose a ring signal” on page 25.
Saving incoming messages
Incoming messages are saved in the phone memory.
The phone memory can hold up to 20 messages.
When the phone memory is full, the oldest read
message is deleted when a new message is received.
If the phone memory becomes full of unread
messages, new messages are automatically saved on
the SIM card. Messages that are saved on the SIM
card remain there until you delete them.
T600.book Page 35 Friday, June 14, 2002 10:07 AM
To save a message on the SIM card
1. When you have read the message, press YES .
2. Select Save and press YES.
Mobile chat
You can use the chat function to send and receive
chat messages. The chat function works in the same
way as a chat on the Internet.
To start a chat session
1. Scroll to Messages, YES, Chat, YES , Start new, YES.
2. Enter the recipient’s phone number or recall it from
the phone book by pressing
3. Write your chat message and press YES .
If you receive a new message while another chat
session is ongoing, the new message is saved in the
Inbox in the Messages menu.
To suspend and resume a chat session
You can suspend an ongoing chat session by pressing
NO twice and
appears in the display. While a
session is suspended you can use any of the other
functions in your phone. When a session is
suspended you can scroll to Messages, YES, Chat YES.
In the chat menu you can choose to:
•Start a new session with another person
•Resume the suspended session
•Save the session
•End the suspended session
Tip: You can also press
when in the chat
session to see a list of options.
When you receive a new chat message from the
person you were chatting with, the chat session is
automatically reactivated if in standby. If you are
using another function of the phone then your phone
beeps.
To end a chat session
1. During a chat session, press NO.
2. End session? appears in the display. To end the
session, press YES.
You can choose to enter a nickname which will
appear in the recipient’s display each time you send
a chat message.
Text and chat messages
35
T600.book Page 36 Friday, June 14, 2002 10:07 AM
To enter a chat nickname
1. Scroll to Messages, YES, Chat, YES , Options, YES.
2. Select Nickname and press YES .
3. Enter your nickname, with a maximum of 6
characters, and press YES .
You can choose to hide your own message from your
phones display when you are in a chat session.
To show or hide your own chat message
1. Scroll to Messages, YES, Chat, YES , Options, YES.
2. Select Hide my lines and press YES .
3. Select On or Off and press YES .
Customising your text messages
You can set a default value for the message options
below, or you can turn on the Set on send option
which means that you choose the setting you want
each time you send a message.
Message type
You can send different types of messages. Your
service provider may offer the facility of converting
a text message into a format (fax, etc.) that suits the
equipment that is going to receive the message.
36
Text and chat messages
Validity period
If your message cannot be delivered, for example if
the recipient has turned off the phone, your service
centre can save the message to send it later.
Reply request
If you want the recipient of your message to reply,
you can turn on the Reply request option.
Status request
If you want to see the status of the message you have
sent, you can turn on the Status request option.
To set a default message option
1. Scroll to Messages, YES , Options, YES.
2. Select an option, YES .
3. Select Set default, YES.
4. Select an option, YES .
To turn Set on send on or off
1. Scroll to Messages, YES , Options, YES.
2. Select an option, YES .
3. Select Set on send, YES.
4. Select On or Off and press YES.
T600.book Page 37 Friday, June 14, 2002 10:07 AM
Long messages
A short text message can consist of up to 160
characters. You can send a longer message, but it is
automatically divided into several shorter messages
(up to three messages) and depending on your service
provider, you can be charged for each message.
To turn long messages on or off
1. Scroll to Messages, YES, Options, YES, Long
messages, YES .
2. Select On or Off and press YES .
Note: If the recipient’s phone does not support long
messages, the messages are received one at a time.
Templates
If you have one or more standard messages that you
use often, you can save these as templates in your
phone. You can save 10 templates consisting of up
to 160 characters each.
To create a template
1. Scroll to Messages, YES, Templates, YES, Add new?,
YES .
2. Enter the message and press YES .
3. To send the template now, press YES when Send
message now? appears and proceed as described in
“To send a text message” on page 33.
Press NO if you do not want to send the template now.
To use a template
1. Scroll to Messages, YES , Templates, YES.
2. Select the template and press YES. You may edit the
message before sending it.
3. When you have completed the message, press YES .
4. Enter the recipient’s phone number.
5. Press YES to send the template.
Tip: If you select a template in Templates and press
, you can see a list of options.
Area information
Area Information is a type of text message
that is sent to all subscribers in a certain
network area, for example, a local traffic
report. The message automatically appears in the
display. You cannot save area messages. When you
have read the message and press YES or NO , it is
deleted.
Please consult your operator for more information
about the area information codes.
Text and chat messages
37
T600.book Page 38 Friday, June 14, 2002 10:07 AM
To turn Area information on or off
1. Scroll to Messages, YES, Options, YES, Area info, YES,
Reception.
2. Select On or Off and press YES .
To insert an Area information code
1. Scroll to Messages, YES, Options, YES, Area info, YES,
Edit list, YES, Add new?, YES .
2. Enter the new code and press YES.
Cell information
The “Cell information channel” is used by
some network operators for sending
messages to their subscribers within a
certain network area.
• To turn on the channel, select Cell information from
the Messages/Options menu and then select On.
Profiles
A profile is a group of settings which are set to suit a
certain environment. For example, when you go to a
meeting, you can choose the Meeting profile and a
number of settings are set – the ring signal is turned
off etc.
The profiles
Your phone has a number of pre-set profiles that you
can add accessories to, rename or change. You
cannot change the name of or add any accessories to
the Normal profile.
Message alerts, ring signals and key sound are
profile dependant, which means that they are different
in each profile, and can be edited in the Profiles menu.
To choose a profile manually
• Scroll to Settings, YES , Profiles, YES and select a
profile.
To change a profile setting
1. Scroll to Settings, YES, Profiles, YES, Edit current, YES .
2. Select a setting and press YES .
3. Change the profile settings and press YES.
38
Profiles
T600.book Page 39 Friday, June 14, 2002 10:07 AM
Diverting incoming calls
To change the name of a profile
• Scroll to Settings, YES, Profiles, YES, Edit current,
YES , Profile name, YES and enter a new name.
You can reset all profile settings to the way they were
set when you bought your phone.
• Select Reset profiles from the Settings/Profiles menu.
Automatic activation
The Port h-free profile, is automatically activated
when you use the portable handsfree accessory.
When you disconnect your phone from the accessory,
the profile is changed back to the one which was
active before, if the current profile was activated
automatically.
When you buy your phone, the automatic
activation is set on the Portable handsfree profile.
To turn automatic activation on or off
1. Scroll to Settings, YES , Profiles, YES, Auto activation,
YES .
2. Select On or Off and press YES .
•
•
•
•
If you cannot answer an incoming voice or data call,
you can divert it to another number.
For voice calls, (not data) you can choose between
the following divert alternatives:
All voice calls – divert all voice calls.
When busy – divert calls if you are already on the
phone.
Not reachable – divert calls if your phone is turned
off or if you are unreachable.
No reply – divert calls that you do not answer within
a specified time limit (operator service).
To turn on a call divert
1. Scroll to Settings, YES , Call options, YES, Divert
calls, YES.
2. Select a divert option and press YES.
3. Select Activate and press YES.
4. Enter the phone number to which you want your calls
to be diverted and press YES , or retrieve it from the
phone book by pressing
Note: A profile with no associated accessories, such
as Meeting or Normal, must be chosen manually.
Diverting incoming calls
39
T600.book Page 40 Friday, June 14, 2002 10:07 AM
Note: When the Restricted Calls function is on, some
Divert Calls options cannot be activated. See
“Restrict calls” on page 42.
To turn off a call divert
1. Scroll to Settings, YES, Call options, YES , Divert
calls, YES.
2. Scroll to a divert option and press YES.
3. Select Cancel and press YES.
• Select Get status to check if a divert option is on or off.
You can check the status of all divert options.
• Select Check all from the Settings/Call options/
Divert calls menu.
Security for your phone and
subscription
The SIM card lock
The SIM card lock protects your
subscription, but not your phone itself, from
unauthorised use. If you change SIM cards,
the phone still works with the new SIM
card.
Most SIM cards are locked at the time of purchase.
If the SIM card lock is on, you have to enter a “PIN”
(Personal Identity Number) every time you turn on
your phone.
If you enter your PIN incorrectly three times in a
row, the SIM card is blocked. This is indicated by the
message PIN blocked. To unblock it you need to
enter your “PUK” (Personal Unblocking Key). Your
PIN and PUK are supplied by your service provider.
To unblock your SIM card
1. PIN blocked appears in the display.
2. Enter your PUK and press YES.
3. Enter a new four- to eight-digit PIN and press YES .
4. Re-enter the new PIN to confirm and press YES.
40
Security for your phone and subscription
T600.book Page 41 Friday, June 14, 2002 10:07 AM
To change your PIN
1. Scroll to Settings, YES, Locks, YES, Card lock, YES ,
Change PIN, YES.
2. Enter your old (current) PIN and press YES.
3. Enter your new PIN and press YES .
4. Re-enter the new PIN to confirm and press YES.
Note: If the message “Codes do not match” appears,
you entered the new PIN incorrectly. If the message
“Wrong PIN” appears, followed by “Old PIN:”, you
entered your old PIN incorrectly.
To change your PIN 2
1. Scroll to Settings, YES, Locks, YES, Card lock, YES ,
Change PIN2, YES .
2. Proceed as described in “To change your PIN”.
To turn the SIM card lock on or off
1. Scroll to Settings, YES, Locks, YES, Card lock, YES ,
Protection, YES.
2. Select On or Off, and press YES.
3. Enter your PIN and press YES.
The phone lock
The phone lock protects the phone against unauthorised
use if it is stolen and the SIM card is exchanged. It is
not on when you buy the phone. You can change the
phone lock code (0000) to any four- to eight-digit
personal code. The phone lock can be set to on,
automatic or off.
Phone lock on
If the phone lock is on, the message Phone locked
Phone lock code: appears each time you turn on the
phone. You have to enter your code followed by YES
to use your phone.
Automatic
If the phone lock is set to automatic, you do not need
to enter your phone lock code until a different SIM
card is inserted in the phone.
Changing the phone lock code
1. Scroll to Settings, YES , Locks, YES , Phone lock, YES,
Change code, YES.
2. Follow the steps described in “To change your PIN”
on page 41.
Security for your phone and subscription
41
T600.book Page 42 Friday, June 14, 2002 10:07 AM
Note: It is important that you remember your new
code. If you should forget it, you have to hand in your
phone to your local Sony Ericsson retailer.
To set the phone lock
1. Scroll to Settings, YES, Locks, YES, Phone lock, YES,
Protection, YES.
2. Select an alternative and press YES.
3. Enter the phone lock code and press YES .
Restrict calls
The Restrict Calls service allows you to
restrict certain types of calls being made and
received.
You need a password, which comes with your
subscription, to activate or cancel a call restriction.
The following calls can be restricted:
• all outgoing calls, All outgoing
• all outgoing international calls, Outgoing intl
• all outgoing international calls except to your home
country, Outg intl roam
• all incoming calls, All incoming
• all incoming calls when you are abroad (when
roaming), Inc when roam
42
Security for your phone and subscription
To turn a call restriction on or off
1. Scroll to Settings, YES , Call options, YES, Restrict
calls, YES.
2. Select an option and press YES .
3. Select Activate or Cancel and press YES .
4. Enter your password and press YES .
• To check the status of a call restriction, select the call
restriction and then Get status.
• To turn off all call restrictions, select Cancel all.
• To change the password, select Change passwd.
Note: If you divert incoming calls, you cannot
activate some Restrict calls options. Likewise, if you
restrict calls, you cannot activate some Divert calls
options.
Fixed dialling
The Fixed Dialling function allows calls to
be made only to certain numbers saved on
the SIM card. If an attempt is made to call
other numbers, the message Number not permitted
appears in the display. Fixed dialling requires a SIM
card that allows fixed numbers to be saved. The fixed
numbers are protected by your PIN2.
T600.book Page 43 Friday, June 14, 2002 10:07 AM
• Partial numbers can be saved. For example, saving
0123456 allows calls to be made to all numbers
starting with 0123456.
• Numbers that include question marks can be saved.
For example, saving 01234567?0, allows calls to be
made to numbers from 0123456700 to 0123456790.
To enter a question mark, press and hold
Note: Calls to the international emergency number
112 can still be made, even when Fixed dialling is on.
To turn Fixed dialling on or off
1. Scroll to Phone Book, YES, Options, YES , Fixed
dialling, YES.
2. Enter your PIN2 and press YES.
3. Select On or Off and press YES .
To save a fixed number
• Select Add new? from the Phonebook/Special
numbers/Fixed numbers menu, then enter the
number.
Closed user groups
The Closed user group function is a way of
lowering call costs. On some networks it is
cheaper to make calls within a call group.
You can have a maximum of 10 groups.
To add a group
1. Scroll to Settings, YES , Call options, YES, Closed
groups, YES, Edit list, YES.
2. Scroll to Add new? and press YES.
3. Enter the name of the user group and press YES .
4. Enter the index number and press YES.
You get the index number from your operator.
To activate a group
1. Scroll to Settings, YES , Call options, YES, Closed
groups, YES, Edit list, YES.
2. Select a group and press YES.
3. Select Activate and press YES.
Calls can only be made within the selected group.
To call outside Closed user groups
1. Scroll to Settings, YES , Call options, YES, Closed
groups, YES, Open calls, YES.
2. Select On and press YES.
Accept calls
With the Accept calls service, you can choose to
receive calls only from certain numbers. Other calls
are rejected by a busy tone. You have to save the
numbers that you want to receive in an Accepted
callers list. The numbers must first be saved in your
phone book. The rejected calls are saved in the Call list.
Security for your phone and subscription
43
T600.book Page 44 Friday, June 14, 2002 10:07 AM
To add numbers to the Accepted callers list
1. Scroll to Settings, YES, Call options, YES , Accept
calls, YES, Accepted list, YES.
2. Scroll to Add new?, YES.
This takes you to the phone book.
3. Select an entry and press YES.
To set the accept calls option
1. Scroll to Settings, YES, Call options, YES , Accept
calls, YES, Accept options, YES .
2. Select an option and press YES.
More than one call
Your phone can handle more than one call
simultaneously. You can, for example, put an
ongoing call on hold while you make or answer a
second call, and then switch between the two calls.
You can set up a conference call to have a joint
conversation with up to four people.
You can also reach the different options described
below by pressing
The Call waiting service
If the Call waiting service is on, you hear a beep if
you receive a second call during an ongoing call.
To turn the call waiting service on or off
1. Scroll to Settings, YES , Call options, YES, Call
waiting, YES.
2. Select Activate or Cancel and press YES .
Select Get status to check if call waiting is on or off.
Note: If you are engaged in data call, incoming calls
are rejected.
44
More than one call
T600.book Page 45 Friday, June 14, 2002 10:07 AM
Making a second call
1. Put the ongoing call on hold by pressing YES .
2. Enter the number you wish to call and press YES
Note: You can only put one call on hold.
Receiving a second call
If the Call waiting service is on, you hear a beep in
the earpiece if you receive a second call.
• Press YES to answer the second call and put the
ongoing call on hold (Answer).
• Select Busy to reject the second call and continue the
ongoing call.
• Select Release&answer to answer the second call
and to end the ongoing call.
One ongoing call and one call on hold
When you have one active call and one call on hold,
you can do one of the following:
• Press YES to switch between the two calls.
• Press
, then select Join calls to join the two calls
into a conference call.
1. Press
, then select Transfer call to connect the
two calls. You are disconnected from both calls. This
service is operator dependent.
• Press NO to end the ongoing call and, then press YES
to retrieve the held call.
• Press
, then select Release all, to end both calls.
Receiving a third call
You cannot answer a third call without ending one of
the first two calls.
• Select Release&answer to end the current call and
answer the waiting call. The call on hold remains on
hold.
• Select Busy to reject the waiting call.
Conference calls
You can include up to four participants in a
conference call. To create a conference call,
you must have one active call and one call
on hold.
To join the two calls into a conference call
1. Press
2. Select Join calls, YES.
More than one call
45
T600.book Page 46 Friday, June 14, 2002 10:07 AM
To add a new participant
1. Press YES to put the conference group on hold.
2. Call the next person you wish to include in the
conference group.
3. Press
4. Select Join calls, YES .
Repeat steps 1 to 3 to include more participants.
To check the participants
1. Press
2. Select Parties in conf, YES.
To rejoin the participant
1. Press
2. Scroll to Join calls, YES .
46
More than one call
You can put a conference on hold and make a new
call. You can switch between the calls in the same
way as when switching between two normal calls.
To end the conference call
• Press NO .
You can have a private conversation with one
participant and put the other participants on hold.
To extract a participant
1. Press
2. Scroll to Parties in conf, YES .
3. Select a participant and press
4. Scroll to Extract part. Press YES .
To release a participant
1. Press
2. Scroll to Parties in conf, YES.
3. Select a participant and press
4. Scroll to Release part, YES .
T600.book Page 47 Friday, June 14, 2002 10:07 AM
Setting network preferences
When you turn on the phone, it automatically
searches for the last accessed network. If
this is not within range, you may use another
network, provided your network operator
has an agreement that allows you to do so. This is
called roaming.
To select a network
1. Scroll to Settings, YES, Networks, YES , Select
network, YES .
2. Select a network and press YES.
To start an automatic network search
• Scroll to Settings, YES, Networks, YES , New search,
YES .
List of preferred networks
You can edit the list that defines in which order your
phone will select a network during automatic
network selection. The list is set by your operator
and stored on the SIM card.
To review the list of networks
1. Scroll to Settings, YES, Networks, YES, Preferred nets,
YES.
2. To see a network’s full name, select the network and
press
3. Scroll to Full name and press YES.
To add a network to the list
1. Scroll to Settings, YES, Networks, YES, Preferred nets,
YES, Add new?, YES.
2. Select the network you want and press YES.
3. If the network you want does not appear in the list,
scroll to Other and press YES .
4. Enter the three-digit country number and the two-digit
network number and press YES .
5. Enter a position number and press YES.
To rearrange the list
1. Scroll to Settings, YES, Networks, YES, Preferred nets,
YES.
2. Select the network you want to move and press
3. Select New priority and press YES.
4. Enter the new position number and press YES .
Setting network preferences
47
T600.book Page 48 Friday, June 14, 2002 10:07 AM
Search modes
• Automatic search mode means that your phone first
searches for the last accessed network. If this is not
available, it automatically searches for another
available network within range.
• Manual search mode means that your phone first
searches for the last accessed network, but if this is
not available, the question Select net? appears. You
then need to choose a network as described in “To
select a network” on page 47.
To select automatic or manual search mode
• Select Automatic or Manual from the Settings/
Networks/Search mode menu and press YES.
Call time and call cost
During a call, the duration of the call is shown in the
display. If you subscribe to cost information, the call
cost (or the number of call units) is displayed instead.
Call time
You can check the duration of your Last call,
Outgoing time, and the Total time.
To check the call time
1. Scroll to Call info, YES, Call timers, YES .
2. Select a call time and press YES.
• Select Reset timers if you want to reset the call time
counter.
Call cost
You can check the cost of your Last call and
the Total cost of your calls.
To check the call cost
1. Scroll to Call info, YES, Call costs, YES.
2. Select a call cost and press YES.
• Select Clear total cost to reset the counter.
48
Call time and call cost
T600.book Page 49 Friday, June 14, 2002 10:07 AM
Note: If you subscribe to cost information, you must
enter your PIN2 to clear the cost or time counter.
Setting the call cost
You can use the “tariff” function to specify the price
per call unit. If you do not specify a price per call
unit, the number of call units is displayed instead.
To set a specific credit limit
1. Scroll to Call info, YES , Call costs, YES, Set credit,
YES.
2. Enter your PIN2 and press YES .
3. Select Change credit and press YES.
• Enter an amount and press YES .
To set an unlimited credit, select Unlimited.
To enter the price per call unit
1. Scroll to Call info, YES, Call costs, YES , Set tariff,
YES .
2. Enter your PIN2 and press YES.
3. Select Change tariff and press YES .
4. Enter the code for the currency you want, (for
example GBP for Pounds Sterling), and press YES.
5. Enter the price per call unit and press YES.
To enter a decimal point, press
Credit limit for calls
If supported by your network and your subscription,
you can enter a total amount of money that can be
used for making calls. When the amount reaches
zero, no more calls can be made. Please note that
the credit limit is only an estimated value.
Call time and call cost
49
T600.book Page 50 Friday, June 14, 2002 10:07 AM
Using the WAP browser
Your phone has a WAP (Wireless Application
Protocol) browser which is designed to bring a
modified Internet to your mobile phone, a mobile
Internet. A wide range of services are available,
for example, news, entertainment, timetables,
reservations, banking, e-mail.
Preparing your phone for WAP
Before you can start using the WAP browser, you
have to enter settings for a WAP profile. You can
have different WAP profiles depending on how you
connect to the Mobile Internet. You could, for example,
have one WAP profile for mobile e-commerce and
another one for general WAP browsing.
Note: The settings may already be entered when you
buy the phone, or you can receive the settings from
your network operator or your service provider. You
can also receive settings from
http:// wap.sonyericsson.com
50
Using the WAP browser
To enter the WAP settings manually
1. Scroll to WAP services, YES, WAP settings, YES .
2. Select a WAP profile and press YES.
3. Scroll to Gateway, YES, User id, YES.
4. Enter the User id to your gateway and press YES .
5. Select Password and press YES .
6. Enter the password to your gateway and press YES.
7. Select Data mode and press YES.
8. Select the data mode conn.less / conn.oriented and
press YES .
9. Select Data address and press YES.
10. Enter the IP address to your gateway and press YES.
11. Press NO to go back one level in the menus.
12. Scroll to GSM data, YES , Phone number, YES.
13. Enter the phone number you use with your GSM data
connection and press YES .
14. Scroll to Dial type and press YES .
15. Select Analogue or ISDN connection and press YES.
You have now entered the settings you need to start
browsing the Internet. You may also need to enter the
following information.
16. Scroll to User id and press YES .
17. Enter the User id for your GSM data connection and
press YES .
T600.book Page 51 Friday, June 14, 2002 10:07 AM
18. Scroll to Password and press YES.
19. Enter the Password for your GSM data connection
and press YES.
To start browsing
1. First select the WAP profile you want to use. Scroll
to WAP services, YES . Select profile, YES .
2. Then do one of the following:
•Open your homepage (Sony Ericsson Mobile
Internet is default).
•Enter the address of a WAP site. Select Enter
address and press YES. Enter the WAP address.
•Go to one of your bookmarks.
Tip: If the WAP address starts with http://, you do
not need to enter this prefix. You only need to enter
the prefix if it starts with something else, for
example, ftp://.
To change homepage
1. Scroll to WAP services, YES, WAP settings, YES.
2. Select the WAP profile you want and press YES.
3. Select Edit homepage and press YES.
4. Enter a name for this homepage and press YES.
5. Enter the address to the WAP page you want to set as
your homepage and press YES.
•
•
•
•
•
•
•
Options while you are browsing
You can reach different options while browsing, by
pressing
. Its content may vary depending on
which WAP site you are visiting.
Go to menu. Go back to the WAP services menu in
order to access other phone menus. When you want
to start browsing again, scroll to WAP services, YES,
Resume, YES .
Reload page. Get the latest version of the WAP page
you are browsing.
Enter address. Enter the WAP address of a page you
want to visit.
Add bookmark. Add the page you are currently
browsing to your list of bookmarks. When you save a
bookmark, it is associated with the WAP profile that
you are currently using.
Send as link. Send a text message with a link to the
current WAP page to another page.
New homepage. Set the current WAP page as your
homepage.
Exit WAP. End your browsing.
Using the WAP browser
51
T600.book Page 52 Friday, June 14, 2002 10:07 AM
To open a bookmark while browsing
1. When you are browsing, press
until the
Options menu appears.
2. Scroll to Go to menu, YES, Bookmarks, YES .
3. Select the bookmark you want and press YES.
4. Select Go to and press YES.
Images
You can choose whether you want to see images or
not when you are browsing. If you turn off the Show
images function, the images appear as icons in the
display.
If an image contains a link, you can access the link
by highlighting the image, then press YES .
To turn the show images function on or off
1. Scroll to WAP services, YES , WAP settings, YES.
2. Select a WAP profile and press YES .
3. Scroll to Show images and press YES.
4. Select On or Off and press YES .
To change the data speed
1. Scroll to WAP services, YES , WAP settings,
YES .
2. Select a WAP profile and press YES .
52
Using the WAP browser
3. Scroll to GSM data, YES , Speed, YES .
4. Select a speed and press YES .
Download timeout
You can specify the time that should pass before the
download attempt of a WAP page is stopped.
To set the download timeout
1. Scroll to WAP services, YES, WAP settings, YES ,
2. Select a WAP profile and press YES.
3. Select Response timer and press YES .
4. Enter how many seconds you want the download to
continue before it stops, and press YES .
To switch WAP profiles
1. Scroll to WAP services, YES, Select profile, YES.
2. Select a WAP profile and press YES.
This WAP profile is active until you switch again.
To change the name of a WAP profile
1. Scroll to WAP services, YES, WAP settings, YES .
2. Select a WAP profile and press YES.
3. Select Rename and press YES.
4. Enter a new name and press YES.
T600.book Page 53 Friday, June 14, 2002 10:07 AM
Clearing cache
You can clear the cache memory which contains
previously visited WAP pages. You may, for
example, want to clear the information on your
transactions.
To clear the cache memory
1. Scroll to WAP services, YES, Clear cache, YES.
2. Empty cache? appears. Press YES.
Security
To establish secure connections when using certain
WAP services, you need to have certificates saved
in your phone.
To check the certificates in your phone
• Scroll to WAP services, YES , Certificates, YES.
You can see a list of the available certificates.
To set a secure connection to a profile
1. Scroll to WAP services, YES , WAP settings, YES .
2. Select a profile.
3. Select Security, YES.
4. Select On, YES.
Calendar
The calendar makes it possible for you to keep track
of important meetings that you need to attend, phone
calls that you need to make or tasks you need to do.
In the calendar you can save:
• Meetings, including date and time, priority, duration,
subject, location, recurrence and a reminder.
• Phone calls, including date and time, priority,
duration, what phone number to call, subject and a
reminder.
• Reminders, including date and time, priority,
recurrence and subject.
• Tasks, including subject, priority and due date.
To add an event in the calendar
1. Scroll to Extras, YES , Calendar, YES.
2. In Month view, use
or
to select the week
of the event you wish to add.
3. Press YES to enter Week view.
4. Use
or
to select a day and press YES .
5. Select Add new event? Press YES.
6. Select an event and press YES.
Calendar
53
T600.book Page 54 Friday, June 14, 2002 10:07 AM
7. Enter settings for the event and proceed at each stage
by pressing YES .
8. The event is saved, when the display shows New
entry added.
Tip: You can also press
event.
in Week view to add an
Note: If due date is left as the current date then the
item will be shown in the calendar until you remove it
or mark it as done. Overdue items have an asterisk in
front of them.
To delete an event in the calendar
1. In the Calendar, scroll to the day of the event.
2. Use
or
to select the event.
3. Press
to delete. Press YES to confirm.
Tip: When the event is selected in the day view, you
can also delete the event from the
menu.
To edit an event in the calendar
1. In the Calendar, scroll to the day of the event.
2. Use
or
to select the event.
3. Press
4. Select Edit and press YES.
54
Calendar
5. Enter the correct date, time etc. and press YES after
each one. If you do not want to change a part of the
entry, press YES and it remains the same.
6. The changed event is saved, when the display shows
Saved.
To call a phone number saved in a phone
call event
1. In the Calendar, scroll to the day in which the phone
call event is saved.
2. Select the phone call event and press
3. Select Call and press YES .
Viewing your calendar
To view your Calendar content, scroll to Extras, YES,
Calendar, YES and then select one of the following:
• Month View. Move from one week to the next by
using the
or
keys. Press YES to enter a
certain week. Press YES again to enter a certain day.
Days which include an event are marked in bold.
• Week View. Events are shown as blocks on an hourly
scale. If a day has todo items assigned to it then the
day name is marked in bold. You can enter a certain
day by pressing YES when a day is highlighted.
• Day View. All the events for a certain day.
T600.book Page 55 Friday, June 14, 2002 10:07 AM
Tip: You can also press
a certain day.
in Month view to select
Viewing the storage status
You can see how many percent of the storage entries
that are free or used, and the interval between your
first and last appointment.
To receive a calendar entry
When you receive a calendar entry, the phone beeps,
the indicator light rapidly flashes green and the message
Calendar entry received Save? appears. If you press
YES the event or task will be saved in your calendar,
and if you press NO the event or task will be
discarded.
1. Scroll to Extras, YES, Calendar, YES.
2. Press
3. Scroll to Status and press YES .
Exchanging calendar entries
You can send and receive calendar events using a text
message.
To send a calendar event
1. Select the event you wish to send from the calendar.
2. Press
3. Select Send and press YES .
4. Enter the recipient’s phone number or recall it from
the phone book by pressing
5. Press YES to send.
Calendar
55
T600.book Page 56 Friday, June 14, 2002 10:07 AM
Code memo
Instead of having to remember all the different
security codes for credit cards and so on, you can
save them encrypted in Code memo in your phone.
Then all you need to remember is the password to
open Code memo.
Using the check word function
To confirm that you have entered the correct password
in Code memo you must enter a Checkword. When
you enter your password the checkword is shown for
a short time. If the password is correct, the correct
codes are shown. If you enter the incorrect password,
the checkword and the codes that are shown are also
incorrect.
Using code memo
To open the code memo for the first time
1. Scroll to Extras, YES, Code memo, YES. A message
appears
2. Press YES and enter a 4 digit password to start the
code memo and press YES.
3. Confirm the new password by entering it again.
Enter a checkword and press YES.
The checkword can consist of both letters and digits.
56
Code memo
To add a new code
1. Scroll to Extras, YES , Code memo, YES .
2. Enter your password to open the code memo.
3. Select Add new code?, YES.
4. Enter a name associated with the code, for example
the name of the credit card company, and press YES.
5. Enter the code and press YES.
To delete a single code
1. Open the code memo as described above.
2. Select the code you want to delete and press
3. Delete? appears. Press YES.
To change a code
1. Open the code memo as described above.
2. Select the code you want to change and press
3. Select Edit.
4. Enter the name and press YES , enter the code and
press YES .
Tip: When a code is selected you can press
edit or delete it.
to
T600.book Page 57 Friday, June 14, 2002 10:07 AM
To change the code memo password
1. Open the code memo as described above.
2. Scroll to Options and press YES.
3. Scroll to Chg password and press YES .
4. Enter your new password and press YES.
5. Repeat the new password and press YES.
6. Enter a checkword and press YES.
Forgot your password?
If you forget your password, just enter any password
to access the Code memo function. The checkword
and codes that are then shown are incorrect. You
must now reset the Code memo.
To reset code memo
1. Scroll to Options, YES, Reset, YES.
2. Reset code memo? appears. Press YES.
The Code memo is reset and all entries are cleared.
The next time you enter the Code memo, you must
start at “To open the code memo for the first time”
on page 56.
Two voice lines
Your phone may have to voice lines with
different phone numbers. This may be
useful if, for example, you want to keep
business calls and private calls on different
lines.
• To select a line, scroll to Call info/Switch to line 1/2.
All outgoing calls are made on this line until you
change it. Incoming calls can still be received on
either line.
You can change the names of the lines, and have
different settings for each line, for example, different
ring signals.
• To change the name of a line, scroll to Settings/
Display/Edit line tags.
Two voice lines
57
T600.book Page 58 Friday, June 14, 2002 10:07 AM
Calling card calls
The Calling card service lets you redirect
the charges to either a credit card account or
to a calling card account, instead of your
normal account. To be able to make calling
card calls, you need to turn on the service.
You can save two separate calling card numbers in
your phone. The numbers are protected by the phone
lock code. See “The phone lock” on page 41.
Note: You cannot use the Calling card service for
data calls.
To turn on the calling card service
1. Scroll to Phone book, YES , Options, YES, Set calling
cards, YES.
2. Enter your phone lock code and press YES.
3. Select On and press YES .
To save a card number
1. Scroll to Phone book, YES , Calling cards, YES.
2. Enter your phone lock code and press YES.
3. Select Add new? and press YES.
58
Calling card calls
4. Enter the access number of the calling card server
and press YES .
5. Enter a name and press YES .
6. Enter the verification code of the calling card server
and press YES .
7. Select which you want to send first – the number you
want to call or the verification – and press YES.
To select a card
1. Scroll to Phone book, YES, Calling cards, YES.
2. Enter your phone lock code and press YES .
3. Select the card you want and press YES.
Making a calling card call
1. Enter the phone number of the person you want to call.
2. Press and hold YES.
The access number of the calling card server is
called. During the connecting phase, you are asked
to send the phone number you want to call and the
verification code, in the order chosen earlier.
3. Press YES when the display shows Send or wait a
few seconds and the number and code are sent
automatically.
T600.book Page 59 Friday, June 14, 2002 10:07 AM
Extras
Alarm clock
The phone has an alarm clock which rings at the time
set, even if the phone is turned off. You can also set
a recurrent alarm to ring at a specific time on several
days, for example, to ring every Monday at a set time
To set the alarm
1. Scroll to Extras, YES, Time, YES, Alarm clock, YES.
2. Enter the time and press YES.
To turn the alarm signal off
• Press any key to turn the alarm off when it rings.
If you do not want the alarm to be repeated, press YES .
To turn the alarm function off
1. Scroll to Extras, YES, Time, YES, Alarm clock, YES.
2. Select Cancel and press YES.
To change the alarm signal
1. Scroll to Settings, YES, Sounds & alerts, YES, Alarm
signal, YES.
2. Select a signal and press YES .
To set the recurrent alarm
1. Scroll to Extras, YES , Time, YES , Recurrent alarm,
YES.
2. Enter the time and press YES .
3. Select the day or days you want and press YES .
Tip: By pressing
when in the recurrence rule
menu, you can make multiple selections and also
clear all selections.
To cancel a recurrent alarm
1. Scroll to Extras, YES , Time, YES , Recurrent alarm,
YES.
2. Select Cancel and press YES.
Calculator
The phone has a built-in calculator which can add,
subtract, divide and multiply. Scroll to Extras, YES,
Calculator, YES.
• Press
to get +, -, x, /.
• Press
to erase.
• Press
to enter a decimal point, %, or brackets.
Extras
59
T600.book Page 60 Friday, June 14, 2002 10:07 AM
•
•
•
•
Stopwatch
Scroll to Extras, YES, Time, YES , Stopwatch, YES.
To start, stop or re-start the stopwatch, press YES.
To save up to 9 lap times, press
To check saved lap times, press
or
To reset the stopwatch, press
Note: The stopwatch is turned off if you receive a
call or text message, or if you exit the stopwatch
menu.
Timer
The phone has a built-in 24-hour timer.
To set the timer
1. Scroll to Extras, YES, Time, YES , Timer, YES .
2. Enter the time and press YES to start the timer.
3. When the alert sounds, press any key to turn it off.
To set a new time when the timer is running
1. Scroll to Extras, YES, Time, YES , Timer, YES , Set new
time, YES .
2. Enter the time and press YES. The countdown begins.
The timer is shown in standby mode. When the alert
sounds, press any key to turn it off.
60
Extras
Games
Your phone features a number of games. When in the
list of games, help texts are available for each game.
To start a game
1. Scroll to Extras, YES , Games, YES.
2. Select a game, YES.
3. Select New (or Resume if the previous game was
paused) and press YES.
•
•
•
•
To control the games
= up,
= down
= left,
= right
= pause,
= select/deselect
= quit,
= confirm
T600.book Page 61 Friday, June 14, 2002 10:07 AM
Online services
Online services are customised services
offered by a service provider, independently
of mobile phones and mobile phone
manufacturers.
New menu
A SIM card which supports the Online services
works in the same way as a normal SIM card.
When you have inserted your SIM card and turned
on your phone, your service provider can, at any
time, download data over the air to your SIM card.
After the first data download and after restarting your
phone, a new menu appears in your phone as the first
sub-menu under the Extras menu.
Sony Ericsson Mobile
Internet
The Mobile Internet is a service supplied by Sony
Ericsson to make it easier for you to communicate
and receive information quickly, wherever you are.
It gives you access to various messaging services,
on-line customer services, user manuals and other
useful information. With the Mobile Internet you can
also download communications software to ensure
you get the best out of your Sony Ericsson products.
The Sony Ericsson Mobile Internet address is:
http://wap.sonyericsson.com
To enter your new menu system
• Scroll to Extras, YES, Online services, YES .
Note: This menu only appears if your SIM card
supports this service. Some service providers may
not use the name “Online services”. Your phone
may not support all of the services offered.
Online services
61
T600.book Page 62 Friday, June 14, 2002 10:07 AM
Troubleshooting
Here are some problems that you might encounter
while using your phone. Some problems require
that you call your service provider, but most of the
problems you can easily correct yourself.
The phone cannot be switched on
Hand-held phone
• Recharge or replace the battery. See “Important
battery information” on page 5.
No indication of charging
When you start charging a battery that is empty or a
battery that has not been used for a long time, it make
take a while before the battery meter appears in the
display.
Display language
If the display shows a language that you do not
understand, you can always choose Automatic
(determined by your SIM card) by pressing
8888
in standby. You can always choose
English by pressing
0000
in standby.
62
Troubleshooting
Error messages
Insert card
There is no SIM card in the phone or you may have
inserted it incorrectly. Insert a SIM card. See “The
SIM card” on page 4.
Insert correct SIM card
The phone is set to work only with certain SIM cards.
Insert the correct SIM card.
SOS calls only
You are within range of a network, but you are not
allowed to use it. However, in an emergency, some
operators allow you to call the international
emergency number 112. See “Making emergency
calls” on page 7.
No network
There is no network within range or the received
signal is too weak. You have to move to get a signal
that is strong enough.
Wrong PIN, wrong PIN2
You have entered your PIN or PIN2 incorrectly.
• Enter the correct PIN or PIN2, and press YES.
See “The SIM card lock” on page 40.
T600.book Page 63 Friday, June 14, 2002 10:07 AM
Codes do not match
When you want to change a security code (for example
your PIN) you have to confirm the new code by
entering it again. The two codes that you have entered
do not match. See “The SIM card lock” on page 40.
PIN/PIN2 blocked
You have entered your PIN or PIN2 incorrectly three
times in a row. To unblock, see “The SIM card lock”
on page 40.
Number not permitted
The Fixed dialling function is on and the number you
have dialled is not on your fixed numbers list. See
“Fixed dialling” on page 42.
Charging, alien battery
The battery you are using is not an Sony Ericssonapproved battery and is charging slowly for safety
reasons.
PUK blocked - contact operator
You entered your personal unblocking key code (PUK)
incorrectly 10 times in a row. Contact your network
operator or service provider.
Phone locked
The phone is locked. To unlock the phone, see “The
phone lock” on page 41.
Phone lock code
Your phone comes with the phone lock code, 0000.
You can change it to any four- to eight-digit code.
See “The phone lock” on page 41.
Troubleshooting
63
T600.book Page 64 Friday, June 14, 2002 10:07 AM
Display icons
Icon
Description
Description
All audible signals are turned off, except
the alarm and timer.
Network signal indicator.
You have received a text message.
Battery status indicator.
All Line 1 incoming calls will be diverted to
a defined number. No calls or only certain
calls from numbers in a list are received.
All Line 2 incoming calls will be diverted to
a defined number. No calls or only certain
calls from numbers in a list are received.
All Line 1 and 2 incoming calls will be
diverted to a defined number. No calls or
only certain calls from numbers in a list are
received.
The ring signal is turned off.
64
Icon
You have received a voice message.
Line 1 is in use for outgoing calls.
Line 2 is in use for outgoing calls.
Indicates that the keypad is locked.
You have an ongoing call.
Indicates a missed call in the call list.
Indicates an answered call in the call list.
The alarm clock has been set and is on.
Indicates a dialled number in the call list.
The recurrent alarm has been set and
is on.
A text message or phone book entry is
saved in the phone memory.
Display icons
T600.book Page 65 Friday, June 14, 2002 10:07 AM
Icon
Description
A text message or phone book entry with
restrictions (e g ring tones, icons) is saved
in the phone memory.
A text message or phone book entry with
restrictions is saved in the SIM card
memory.
Icon
Description
Incoming chat message.
Outgoing chat message.
Melody inserted in a text message.
Only part of a message is saved in the
phone memory.
Indicates a meeting in your calendar.
The phone book entry is a group.
Indicates an event to make a phone call.
Unread text message (in inbox list).
Indicates a reminder is set in your
calendar.
Unread text message with restrictions.
Indicates a task in your calendar.
Unchecked voice message (in inbox list).
The task has been marked as done in
the calendar.
You can enter the phone book by pressing
Preferred network.
The text message is saved in the SIM card
memory.
Forbidden network.
Indicates that you have an ongoing
session.
Your home network is within range.
Display icons
65
T600.book Page 66 Friday, June 14, 2002 10:07 AM
Icon
Description
Indicates a help text.
Ciphering is currently not being provided
by the network.
A secure WAP connection has been
established.
66
Quick keys
Quick keys
To...
Do this:
enter the Call list
press YES from standby
enter My shortcuts
press
standby
enter the Find menu
press and hold
from standby
call your voice mail service
press and hold
from standby
enter the + sign to make an
international phone call
press and hold
from standby
set the phone to silent
press and hold
from standby
turn on keylock
press
from
standby and select
Turn on keylock.
turn off keylock
press
press YES
speed dial (phone book
positions 1–9)
press any of the
number keys
and YES from
standby
from
and then
T600.book Page 67 Friday, June 14, 2002 10:07 AM
To...
Do this:
find a phone book entry
press and hold any of
beginning with the first letter the keys
–
(or the closest following) on from standby
a key
find a phone book entry
enter the position
number and press
from standby
put a call on hold
press YES
switch between two calls
press YES
Technical data
General
Product name
T600
System
GSM 900/GSM 1800/
GSM 1900
SIM card
Small plug in card 3V
Dimensions
Size
92 x 41 x 19.5 mm
Weight with standard battery 60 g
Ambient temperatures
Max
+55°C
Min
–10°C
Technical data
67
T600.book Page 68 Friday, June 14, 2002 10:07 AM
Safe and Efficient Use
Note: Please read this information before
using your mobile phone.
•
•
•
•
•
•
•
•
•
68
Recommendations
Always treat your product with care and keep it in a
clean and dust-free place.
Do not expose your product to liquid or moisture or
humidity.
Do not expose your product to extreme high or low
temperatures.
Do not expose your product to open flames or lit
tobacco products.
Do not drop, throw or try to bend your product.
Do not paint your product.
Turn your product off in places where posted notices
instruct you to do so and in places where mobile
phones are prohibited including aircraft and
hospitals.
Do not place your product or install wireless
equipment in the area above your car’s air bag.
Do not attempt to disassemble your product. Only
Sony Ericsson authorised personnel should perform
service.
Safe and Efficient Use
• If your mobile phone is equipped with infrared, never
direct the infrared ray at anyone’s eye and make sure
that it does not disturb any other infrared units.
Antenna
Only use an antenna that has been specifically
designed by Sony Ericsson for your mobile phone.
Use of unauthorised or modified antennas could
damage your mobile phone and may violate
regulations, causing loss of performance and SAR
levels above the recommended limits (see below).
Efficient Use
Hold your mobile phone as you would any other
phone. Do not cover the top of the phone when in
use, as this affects call quality and may cause the
phone to operate at a higher power level than needed,
thus shortening talk and standby times.
Radio Frequency (RF) Exposure and SAR
Your mobile phone is a low-power radio transmitter
and receiver. When it is turned on, it emits low levels
of radio frequency energy (also known as radio
waves or radio frequency fields).
T600.book Page 69 Friday, June 14, 2002 10:07 AM
Governments around the world have adopted
comprehensive international safety guidelines,
developed by scientific organisations, e.g. ICNIRP
(International Commission on Non-Ionising
Radiation Protection) and IEEE (The Institute of
Electrical and Electronics Engineers Inc.), through
periodic and thorough evaluation of scientific
studies. These guidelines establish permitted levels
of radio wave exposure for the general population.
The levels include a safety margin designed to assure
the safety of all persons, regardless of age and health,
and to account for any variations in measurements.
The radio wave exposure guidelines employ a unit
of measurement known as the Specific Absorption
Rate, or SAR. Tests for SAR are conducted using
standardised methods with the phone transmitting at
its highest certified power level in all used frequency
bands. The actual SAR level of the mobile phone
while operating can be well below the value stated
below. This is because the mobile phone is designed
to use the minimum power required to reach the
network. Therefore, the closer you are to a base
station, the more likely it is that the actual SAR level
will decrease.
Variations in SAR below the radio frequency
exposure guidelines do not mean that there are
variations in safety. While there may be differences
in SAR levels among various mobile phones, all
Sony Ericsson mobile phone models are designed
to meet the relevant guidelines for radio frequency
exposure.
• SAR data information for residents in countries/regions
that have adopted the SAR limit recommended by
the International Commission on Non-Ionising
Radiation Protection (ICNIRP), which is 2 W/kg
averaged over ten (10) gram of tissue (for example
European Union, Japan, Brazil and New Zealand):
The highest SAR value for this model phone
when tested by Sony Ericsson for use at the ear is
0.8 W/kg (10g).
Driving
Please check if local laws/regulations restrict the use
of mobile phones while driving or require drivers to
use handsfree solutions. We recommend that you use
only Ericsson or Sony Ericsson handsfree solutions
intended for use with your product.
Safe and Efficient Use
69
T600.book Page 70 Friday, June 14, 2002 10:07 AM
Always give full attention to driving and pull off
the road and park before making or answering a call
if driving conditions so require.
Please note that because of possible interference
to electronic equipment, some vehicle manufacturers
forbid the use of mobile phones in their vehicles unless
a handsfree kit with an external antenna supports the
installation.
Personal Medical Devices
Mobile phones may affect the operation of cardiac
pacemakers and other implanted equipment. Please
avoid placing the mobile phone over the pacemaker,
e.g. in your breast pocket. When using the mobile
phone, place it at the ear opposite the pacemaker. If a
minimum distance of 15 cm (6 inches) is kept between
the mobile phone and the pacemaker, the risk of
interference is limited. If you have any reason to
suspect that interference is taking place, immediately
turn off your mobile phone.
Contact your cardiologist for more information.
For other medical devices, please consult the
manufacturer of the device.
70
Safe and Efficient Use
Children
DO NOT ALLOW CHILDREN TO PLAY WITH
YOUR MOBILE PHONE OR ITS ACCESSORIES.
THEY COULD HURT THEMSELVES OR OTHERS,
OR COULD ACCIDENTALLY DAMAGE THE
MOBILE PHONE OR ACCESSORY. YOUR
MOBILE PHONE OR ITS ACCESSORY MAY
CONTAIN SMALL PARTS THAT COULD
BE DETACHED AND CREATE A CHOKING
HAZARD.
Disposing of the Product
Your mobile phone should not be placed in municipal
waste. Please check local regulations for disposal of
electronic products.
Power Supply
Connect the AC power adapter only to designated
power sources as marked on the product. Make sure
the cord is positioned so that it will not be subjected
to damage or stress. To reduce risk of electric shock,
unplug the unit from any power source before
attempting to clean it. The AC power adapter must
not be used outdoors or in damp areas. Never alter
the cord or plug. If the plug will not fit into the outlet,
have a proper outlet installed by a qualified electrician.
T600.book Page 71 Friday, June 14, 2002 10:07 AM
Emergency Calls
Mobile phones operate using radio signals, which
cannot guarantee connection under all conditions.
Therefore you should never rely solely upon any
mobile phone for essential communications (e.g.
medical emergencies).
Emergency calls may not be possible on all cellular
networks or when certain network services and/or
mobile phone features are in use. Check with your
local service provider.
Battery Information
We recommend that you charge the battery for 4 hours
before you use your mobile phone for the first time.
The battery can only be charged in temperatures
between +5°C (+41°F) and +45°C (+113°F).
A new battery or one that has not been used for
a long time could have reduced capacity the first few
times it is used.
The talk and standby times depend on usage
conditions and network configurations when using
the mobile phone. If the mobile phone is used near
a base station, less power is required and talk and
standby times are prolonged.
• Warning! May explode if disposed of in fire.
• Do not expose the battery to liquid.
• Do not let the metal contacts on the battery
touch another metal object. This could
short-circuit and damage the battery.
• Use only Ericsson or Sony Ericsson
branded original batteries and chargers
intended for use with your mobile phone.
Other chargers may not charge sufficiently
or may produce excessive heat. Using other batteries
and chargers could be dangerous.
• Do not disassemble or modify the battery.
• Do not expose the battery to extreme
temperatures, never above +60°C (+140°F).
For maximum battery capacity, use the
battery in room temperature.
• Turn off your mobile phone before removing
the battery.
• Keep out of children’s reach.
• Do not allow the battery to be put into the
mouth. Battery electrolytes may be toxic if
swallowed.
• Use the battery for the intended purpose
only.
Safe and Efficient Use
71
T600.book Page 72 Friday, June 14, 2002 10:07 AM
Disposing of the Battery
The battery should never be placed in
municipal waste. Please check local
regulations for disposal of batteries or call
your local Sony Ericsson Customer Care Centre
for information.
Limited Warranty
Sony Ericsson Mobile Communications AB,
S-221 88 Lund, Sweden, (Sony Ericsson), provides
this Limited Warranty for your mobile phone and
original accessory delivered with your mobile phone
(hereinafter referred to as “Product”).
Should your Product need warranty service, please
return it to the dealer from whom it was purchased,
or contact your local Sony Ericsson Customer Care
Centre (national rates may apply) or visit
www.SonyEricsson.com to get further information.
Our Warranty
Subject to the conditions of this Limited Warranty,
Sony Ericsson warrants this Product to be free from
defects in design, material and workmanship at the
time of its original purchase by a consumer, and for
a subsequent period of one (1) year.
What We Will Do
If, during the warranty period, this Product fails to
operate under normal use and service, due to defects
in design, materials or workmanship, Sony Ericsson
authorised distributors or service partners, in the
72
Limited Warranty
T600.book Page 73 Friday, June 14, 2002 10:07 AM
country/region* where you purchased the Product,
will, at their option, either repair or replace the
Product in accordance with the terms and conditions
stipulated herein.
Sony Ericsson and its service partners reserve the
right to charge a handling fee if a returned Product
is found not to be under warranty according to the
conditions below.
Conditions
1. The warranty is valid only if the original proof of
purchase issued to the original purchaser by the dealer,
specifying the date of purchase and serial number**,
is presented with the Product to be repaired or
replaced. Sony Ericsson reserves the right to refuse
warranty service if this information has been removed
or changed after the original purchase of the Product
from the dealer.
2. If Sony Ericsson repairs or replaces the Product, the
repaired or replaced Product shall be warranted for
the remaining time of the original warranty period
or for ninety (90) days from the date of repair,
whichever is longer. Repair or replacement may
involve the use of functionally equivalent
reconditioned units. Replaced parts or components
will become the property of Sony Ericsson.
3. This warranty does not cover any failure of the
Product due to normal wear and tear, or due to
misuse, including but not limited to use in other than
the normal and customary manner, in accordance
with the Sony Ericsson instructions for use and
maintenance of the Product. Nor does this warranty
cover any failure of the Product due to accident,
modification or adjustment, acts of God or damage
resulting from liquid.
4. Since the cellular system on which the Product is to
operate is provided by a carrier independent from
Sony Ericsson, Sony Ericsson will not be responsible
for the operation, availability, coverage, services or
range of that system.
5. This warranty does not cover Product failures caused
by installations, modifications, or repair or opening
of the Product performed by a non-Sony Ericsson
authorised person.
6. The warranty does not cover Product failures which
have been caused by use of accessories or other
peripheral devices which are not listed under
“Accessories” in this user’s guide.
7. Tampering with any of the seals on the Product will
void the warranty.
Limited Warranty
73
T600.book Page 74 Friday, June 14, 2002 10:07 AM
8. THERE ARE NO EXPRESS WARRANTIES,
WHETHER WRITTEN OR ORAL, OTHER
THAN THIS PRINTED LIMITED WARRANTY.
ALL IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL
SONY ERICSSON OR ITS LICENSORS BE
LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE WHATSOEVER, INCLUDING
BUT NOT LIMITED TO LOST PROFITS
OR COMMERCIAL LOSS, TO THE FULL
EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, or
limitation of the duration of implied warranties, so
the preceding limitations or exclusions may not
apply to you.
74
Limited Warranty
The warranty provided does not affect the
consumer’s statutory rights under applicable
legislation in force, nor the consumer’s rights against
the dealer arising from their sales/purchase contract.
* European Union (EU)
If you have purchased your Product in an EU country
you can have your Product serviced, under the
conditions set out above, within the warranty period
in any EU country where an identical Product is sold
by an authorised Sony Ericsson distributor. To find
out if your Product is sold in the EU country you are
in, please call the local Sony Ericsson Customer Care
Centre. Please observe that certain services may not
be possible elsewhere than in the country of original
purchase, for example due to the fact that your
Product may have an interior or exterior which
is different from equivalent models sold in other
EU countries. It may not be possible to repair
SIM-locked Products.
** In some countries/regions additional information
is requested. If so, this is clearly shown on the valid
proof of purchase.
T600.book Page 75 Friday, June 14, 2002 10:07 AM
•
•
•
•
•
•
•
•
Accessory Information
Your product supports the following accessories:
Regulatory Information
Standard Battery BSL-14
Travel Charger CTR-10
Micro Travel Charger CMT-10
Cigarette Lighter Adapter CLA-11
Desk Stand CDS-11
Portable Handsfree with answering button HPB-10
Portable Handsfree HPE-14
Car Holder HCH-30
declare under our sole responsibility that our product
The full range of accessories may not be available in
every market.
Subject to change without prior notice.
Declaration of Conformity
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
S-221 88 Lund, Sweden
Sony Ericsson type 1130402-BV
and in combination with our accessories, to which this
declaration relates is in conformity with the appropriate
standards 3GPP TS 51.010-1, EN 301 489-7 and EN
60950, following the provisions of, Radio Equipment
and Telecommunication Terminal Equipment Directive
99/5/EC with requirements covering EMC directive
89/336/EEC, and Low voltage directive 73/23/EEC.
Lund May, 2002
Place & date of issue
Kentaro Odaka, Head of Product Business Unit GSM/UMTS
0682
We fulfil the requirements of the R&TTE Directive
(99/5/EC).
Regulatory Information
75
T600.book Page 76 Friday, June 14, 2002 10:07 AM
FCC Statement
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device may not
cause harmful interference, and (2) This device must
accept any interference received, including
interference that may cause undesired operation.
76
Regulatory Information
T600.book Page 77 Friday, June 14, 2002 10:07 AM
Index
Accept calls 43
Alarm clock 59
set time 59
turn off 59
Alarm signal 59
Answering a call 8
Answering mode 31
Answering service. See Voice mail
service
Area information 37
Ask to save 19
Assembling the phone 4
Background picture 29
Barring calls. See Restrict calls
Battery 5
Battery indicator 64
Bookmarks 51
adding a bookmark 51
Business cards 21
editing 22
receiving 22
sending 21
Calculator 59
Calendar 53
add an event 53
deleting an event 54
editing an event 54
receiving an entry 55
schedule a meeting 53
schedule a phone call 53
sending an entry 55
set a reminder 53
set a task 53
Call barring. See Restrict calls
Call cost 48
setting a credit limit 49
setting a price per call unit 49
Call divert
turning off 40
turning on 39
Call forwarding. See Call divert
Call list 23
call number 23
missed calls 24
Call restrictions. See Restrict calls
Call time 48
Call waiting service
turning off 44
turning on 44
Calling Line Identification (CLI)
service 8
Calls
answering 8
conference 45
emergency 7
ending 6
hiding your number 9
international 7
making 6
putting on hold 45, 46
receiving 8
rejecting 8
showing your number 9
switching between calls 45
Cell information 38
Charging 5
Chat 35
ending a chat session 35
nicknames 35
resuming a chat session 35
snippets 36
77
T600.book Page 78 Friday, June 14, 2002 10:07 AM
starting a chat session 35
suspending a chat session 35
Choosing a calling card 58
Clock. See Time
Closed user groups 43
Code Memo 56
Conference calls 45
adding a participant 46
extracting a participant 46
releasing a participant 46
setting up 45
Credit card calls
making a call 58
saving a number 58
Date 31
setting 31
Display
help texts 12
light 30
Divert calls
turning off 40
turning on 39
78
Earpiece volume 7
Emergency calls 7
Emergency numbers 8
Ending a call 6
Entering letters 15
Fixed dialling 42
turning on 43
Fixed numbers 43
storing 43
Forwarding calls. See Call divert
Games 60
Groups. See phone book
Handsfree 31
Help texts 12
Hiding your number 9
International calls 7
International emergency number 7
Key functions 11
quick keys 66
Key sound 30
Keypad 3
Keypad lock 30
automatic 30
manual 30
unlock 30
Letters
entering 15
input modes 15
T9 input 17
Making a call 6
Master reset 32
Melodies
compose or edit 26
insert in message 33
save from message 34
Menu language 12
T600.book Page 79 Friday, June 14, 2002 10:07 AM
Menus 11
display text 12
leave a menu 11
moving (scrolling) through 11
select a menu 11
shortcuts 11
Message signal 28
Messages. See Text messages
Microphone
muting 7
turning off 7
Minute minder 30
Missed calls 24
Moving through menus 11
Muting the microphone 7
My shortcuts 13
adding function 13
removing function 13
Network
preferred 47
search modes 48
selecting 47
Notepad 8
Online Services 61
Opening a homepage 51
Opening a WAP page 51
Personal ring signal 26
Phone
turning off 6
turning on 6
Phone book 18
ask to save 19
card memory 20
delete a phone number 19
editing a name 19
editing a phone number 19
groups 21
memory 20
overwrite protection 20
phone memory 20
save a number 18
shortcuts 19
sort order 20
Phone lock
activating/cancelling 42
auto lock 41
changing the security code 41
on 41
Pictures 28
edit 28
insert in message 33
save from message 34
PIN
changing 41
PIN2
changing 41
Plus sign (+) 7
Profiles
selecting 38
PUK 40
Quick Keys 66
Reading a message 34
Receiving a call 8
Recurrent alarm 59
Re-dialling
automatic 7
Rejecting a call 8
Request reply (SMS) 36
79
T600.book Page 80 Friday, June 14, 2002 10:07 AM
Restrict calls 42
changing password 42
changing status 42
Ring signal
choosing 25
compose own melody 26
increasing ring 25
message signal 28
personal 26
turn off 25
volume 30
Saving a number 18
Scrolling 10
Sending a message 33
Sending Touch Tone Signals 9
Service centre 32
Shortcuts 11
Showing your number 9
Silent ring signal 25
SIM card 5
unblocking 40
SIM card lock
activating/cancelling 41
SMS. See Text messages
SOS calls 7
80
SOS numbers 8
Special Alarm
turn off 59
Standby mode 6
Switching between two calls 45
Text messages 32
calling phone number in 34
deleting 34
forwarding 34
long messages 37
message types 36
reading 34
reply requested 36
replying 34
saving 34
sending 33
Time 30
format 31
setting the time 30
Tone signals
turning off 9
Turn off microphone 7
Turning phone on 6
Two voice lines 57
Vibrating alert 28
Voice mail 24
Voice mail service
calling 24
saving number 24
Volume
earpiece 7
Volume key 8, 10
WAP
bookmarks 51
entering WAP settings 50
opening a homepage 51
opening a WAP page 51
preparing the phone 50
security 53
WAP profiles 52

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:06:14 10:09:16
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2002:06:19 09:44:39+02:00
Page Count                      : 80

EXIF Metadata provided by EXIF.tools