Sony SGPT1311 TABLET DEVICE User Manual

Sony Corporation TABLET DEVICE ST

a href="https://usermanual.wiki/Sony" itemprop="url"> Sony >

Users Manual 2

Tablet Device SGPT12&SGPT13 Series&SGPT13
3GBImportant product informationOwner’s RecordThe model number and serial number are located on the rear panel of your tablet device. Record the model and serial numbers in the space provided here, and keep in a secure location. Refer to the model and serial numbers when you call your Sony Service Center.Model Number:Serial Number:Regulatory Information (USA)If you have questions about this product, you can write to the Sony Customer Information Service Center at 12451 Gateway Blvd., Fort Myers, FL 33913, USA or find Sony Customer Service on the Web site at:http://esupport.sony.com/US/ for customers in USA or http://www.sony.ca/support/ for customers in Canada.Declaration of ConformityTrade Name:  SONYModel No.: SGPT1311Responsible Party: Sony Electronics Inc.Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A.Telephone No.:(For FCC-related matters only)858-942-2230This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
4The following FCC statements apply only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations, and the FCC statements are not applicable in Canada, including the Province of QUEBEC.FCC Information (USA)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.Only peripherals (input/output devices, terminals, printers, etc.) that comply with FCC Class B limits may be attached to this product. Operation with noncompliant peripherals is likely to result in interference to radio and television reception.All cables used to connect peripherals must be shielded and grounded. Operation with cables connected to peripherals that are not shielded and grounded may result in interference to radio and television reception.
Download:
Mirror Download [FCC.gov]
Document ID1744381
Application IDsKTf9uqZ2eDI1xTPyna+5g==
Document DescriptionUsers Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize9.51kB (118814 bits)
Date Submitted2012-07-16 00:00:00
Date Available2013-01-12 00:00:00
Creation Date2017-10-30 23:18:14
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-30 23:18:14
Document TitleUsers Manual 2
Document CreatorAdobe InDesign CS2 (4.0.5)
FCC ID Filing: AK8SGPT1311

Navigation menu