Sophos AP15 Wireless Access Point AP15 User Manual

Sophos Ltd Wireless Access Point AP15

a href="https://usermanual.wiki/Sophos" itemprop="url"> Sophos >

Contents

user manual

Operating InstructionsSophos Access Points
Operating Instructions1Wireless Access PointsForewordWe are pleased to welcome you as a new Sophos Access Point customer.These operating instructions will help you install and configure the access point and provide technical specifications of all Sophos access point models. In addition, please also see the following documents that contain useful information on safety, regulatory compliance, and configuration options: Ì Sophos Access Points Safety Instructions and Regulatory Information Ì Sophos UTM Administration Guide: Configuring the UTM hardware and software applianceThe instructions must be read carefully prior to using the device and should be kept in a safe place. You may download all user manuals and additional documentation from the Sophos Knowledgebase at http://www.sophos.com/en-us/support/knowledgebase.aspx.IntroductionUTM Wireless Protection simplifies the operation of secure and reliable wireless networks. It combines affordable and configuration-less access points through a built-in wireless controller in the in Sophos UTM. The wireless controller itself centrally manages all wireless access points; all you need to do is plug in the device anywhere in your network. The access point will find the controller, fetch its configuration and become operable within seconds. In addition, it easily provides wireless guest Internet access during the initial setup, unless you explicitly deny automatic configuration.InstallationAP 10/15/30/50/100Preliminary stepsPlease update your UTM appliance to the latest version available. Note that you also need a valid UTM Wireless Protection subscription to operate the Sophos Access Points.Connect the access point to the internal networkDecide where you would prefer to place the access point, and put the access point in that location. For mounting instructions, see below. Now connect the access point to your internal network by plugging in the network cable to the access point’s RJ45 or LAN (PoE) Ethernet interface, respectively.
Download:
Mirror Download [FCC.gov]
Document ID2375829
Application ID6CbVg2sdeN12SUvh0LS/Xg==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize92.61kB (1157591 bits)
Date Submitted2014-09-03 00:00:00
Date Available2014-09-03 00:00:00
Creation Date2014-09-02 15:00:01
Producing SoftwareAdobe PDF Library 11.0
Document Lastmod2014-09-02 16:10:53
Document Titleuser manual
Document CreatorAdobe InDesign CC 2014 (Macintosh)
FCC ID Filing: 2ACTO-AP15

Navigation menu