Sorenson Communications ADWAS-1986 Bluetooth System User Manual

Sorenson Communications, Inc. Bluetooth System Setup Guide Sorenson Pulse

a href="https://usermanual.wiki/Sorenson-Communications" itemprop="url"> Sorenson Communications >

User Manual

Sorenson Pulse Setup GuideVersion 1.0April 19, 2018Part No: 770-00002Sorenson Confidential — Do Not Distribute Without PermissionModel: ADWAS-1986Table of Contents • Take Inventory ............................................................................. 2• Connect the Equipment ............................................................. 3• Safety Instructions ...................................................................... 5• Regulatory Compliance ............................................................. 6
Take Inventory2Sorenson PulseSorenson Confidential — Do Not Distribute Without PermissionTake InventoryStep 1. Check For These Things FirstYou will need to have the following things ready and available near the location where you intend to set up your Sorenson Pulse device:Sorenson ntouch VP2 Videophone or other ntouch Endpoint Device The Sorenson Pulse flasher is designed for use with the Sorenson ntouch VP2 videophone or other ntouch endpoint device that supports wireless connections. A wireless connection between the Pulse and the ntouch endpoint allows the Pulse to flash a visual signal whenever an incoming call is received by the ntouch endpoint. Electrical OutletYou’ll need a standard 120v AC electrical outlet located near your Pulse device. A power transformer is supplied with your videophone. Step 2. Unpack the Shipping BoxLook for the following components packed in the shipping box:Pulse DeviceThe Pulse device is a white circular plastic unit with a power port on its back side. Two slider switches are used to set the intensity of the two flasher systems in the device. A radio “pairing” button is located above the two slider switches. DC Power Supply The DC Power Supply (transformer) is a black rectangular device with an integral power cord that you will attach to the power port on the back side of the Pulse device. Do not use any other transformer with the Pulse device.Step 3. Examine the Backside of the Pulse DeviceExamine the back side of the Pulse device to identify its power port, flash intensity control switches, radio pairing button and wall-mount slot:Backside view Flash intensity switchesRadio pairing buttonPower portWall-mount slot
Download:
Mirror Download [FCC.gov]
Document ID3822860
Application IDJPtZnbIUCndRiuBy/zN5Fg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeYes
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize0.3kB (3774 bits)
Date Submitted2018-04-19 00:00:00
Date Available2018-04-19 00:00:00
Creation Date2015-06-03 11:02:08
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2018-04-19 11:33:18
Document TitleSetup_Guide_Sorenson-Pulse
Document CreatorFrameMaker 2015.0.5
Document Author: THawkes
FCC ID Filing: XHU-ADWAS-1986

Navigation menu