SparkLAN Communications WPEA127NI 802.11a/b/g/n 3T3R Mini PCIe Module User Manual WPEA 127NI v1 1

Download:
Mirror Download [FCC.gov]
Document ID	1691576
Application ID	EUxAvVD0YyIfbeU2XBThaw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.75kB (321901 bits)
Date Submitted	2012-05-07 00:00:00
Date Available	2012-05-07 00:00:00
Creation Date	2012-04-24 17:16:54
Producing Software	GPL Ghostscript 8.70
Document Lastmod	2012-05-03 13:24:51
Document Title	WPEA-127NI_v1.1
Document Creator	PDFCreator Version 1.0.2
Document Author:	jane

WPEA-127NI
■ Reference Design: XB114
■ Chipset: Atheros AR9390-AL1B
■ Interface: Mini PCI Express
■ Industrial-Grade Temperature:
-40 ~ 80°C
■ Wireless connection up to
450Mbps
■ RF 3T3R
■ Output Power up to 18dBm
■ Enhanced wireless security:
64/128-bits WEP, WPA, WPA2
■ Windows XP/ Vista, Win 7,
Linux, Android by request
Application
■ Networking Equipment
■ Industrial Computers
■ Automation
■ Medical Device
■ POS (Point-of-Sale) System
■ Self-Service KIOSK
■ Gaming Machine
--------------------------------------------------------------------------------------------
Feature
802.11a/b/g/n
Industrial-Grade Mini Card
Reference Design: XB114, Atheros AR9390-AL1B
Industrial-Grade Temperature -40 ~ 80°C
Reliable High-Speed Industrial Embedded Application
SparkLAN WPEA-127NI is a high-speed 802.11n 3T3R Mini PCI module based on
Atheros XB114 Reference Design (AR9390-AL1B chipset), which delivers up to
450Mbps data rate. It supports the high transmission data rate and reliable
performance of 3 x 3 radios which are ideal for streaming multimedia
applications. It provides 3 stream MIMO configurations, which is easy to
implement to integrate into AP, Client Bridge and embedded system.
Industrial-Grade Temperature Range
WPEA-127NI is able to function under sever weather condition (-40 ~ 80°C), which is
ideal for manufacturers to integrate with their devices that are designed for
wide-temperature range.
Mechanical Dimension (mm)
www.sparklan.com / sales@sparklan.com / +886-2-2659-1880
WPEA-127NI
■ WPEA-127N
802.11a/b/g/n Mini Card
Ordering Info
■ WPEA-127NI
802.11a/b/g/n IndustrialGrade Mini Card
--------------------------------------------------------------------------------------------
Related Product
Specifications
Standard
802.11a/b/g/n
Chipset
Mac/BB/RF
Atheros AR9390-AL1B
Host Interface
Mini PCI Express
Radio
Antenna
Operating Frequency
Modulation
3 x U.FL connectors, 3T3R
11b/g/n ISM Band: 2.400~2.472GHz
11a ISM Band:5.180GHz ~ 5.825GHz
802.11a: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
802.11b: DSSS (DBPSK, DQPSK, CCK)
802.11g: OFDM (BPSK,QPSK,16-QAM,64-QAM)
802.11n: OFDM (BPSK,QPSK,16-QAM,64-QAM)
Output Power
92.0mW for 2412~2462MHz
120.8mW for 5745~5825 MHz
27.6mW for 5180~5240 MHz
51.8mW for 5260~5320 MHz
50.4mW for 5500~5700 MHz
Receive Sensitivity
802.11a: -76dBm ± 2dBm@54Mbps
802.11b: -90dBm ± 2dBm@11Mbps
802.11g: -76dBm ± 2dBm@54Mbps
802.11gn HT20: -74dBm ± 2dBm@ MCS7
802.11gn HT40: -70dBm ± 2dBm@ MCS7
802.11n HT20: -69dBm ± 2dBm@ MCS7
802.11n HT40: -68dBm ± 2dBm@ MCS7
Power consumption
Continue TX
970mA
Continue RX
300mA
Operating Voltage
DC 3.3V ± 5%
Environmental
Temperature Range
Humidity
(Non-Condensing)
-40 ~ 80°C (Operating) -50~95°C (Storing)
5 ~ 90% (Operating) 5% ~ 95% (Storage)
Physical Specification
Dimensions
50.8mm x 29.84mm x 3.3mm
Weight
≤ 7g
Software
Driver
Windows XP/ Vista, Win 7, Linux, Android by request
Security
64/128-bits WEP, WPA, WPA2
www.sparklan.com / sales@sparklan.com / +886-2-2659-1880
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
installation.
However, there is no guarantee that interference will not occur in a particular
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements required
with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer considered
valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20
cm may be maintained between the antenna and users. The final end product must be labeled in a visible
area with the following: “Contains FCC ID: RYK-WPEA127NI”. The grantee's FCC ID can be used only when
all FCC compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts
de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire
de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.
This device is intended only for OEM integrators under the following conditions: (For module device
use)
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements required
with this module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour
utilisation de dispositif module)
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les
utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas
nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour
toutes exigences de conformité supplémentaires requis pour ce module installé.
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location
with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not
be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating
the end product (including the transmitter) and obtaining a separate Canada authorization.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations
d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est
plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances,
l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une
autorisation distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20
cm may be maintained between the antenna and users. The final end product must be labeled in a visible
area with the following: “Contains IC:6158A-WPEA127NI”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être
installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le
produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC:
6158A-WPEA127NI".
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon
d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce
module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements
comme indiqué dans ce manuel.
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Avertissement:
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation
à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant
les mêmes canaux;
(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5
850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
This device has been designed to operate with an antenna having a maximum gain of 5 dBi. Antenna having
a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50
ohms.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter (IC: 6158A-WPEA127NI / Model: WPEA-127NI) has been approved by Industry
Canada to operate with the antenna types listed below with the maximum permissible gain and required
antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de 5 dBi. Une antenne à
gain plus élevé est strictement interdite par les règlements d'Industrie Canada. L'impédance d'antenne
requise est de 50 ohms.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectriqueà l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire àl'établissement d'une communication satisfaisante.
Le présent émetteur radio (IC: 6158A-WPEA127NI / Modèle: WPEA-127NI) a été approuvé par Industrie
Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible
maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,
ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur.
Approved antenna(s) list
Type
Gain
Dipole
For 2.4G: 3 dBi ;
For 5G: 5 dBi

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : 3.1-701
Producer                        : GPL Ghostscript 8.70
Keywords                        : 
Modify Date                     : 2012:05:03 13:24:51+08:00
Create Date                     : 2012:04:24 17:16:54+08:00
Creator Tool                    : PDFCreator Version 1.0.2
Metadata Date                   : 2012:05:03 13:24:51+08:00
Document ID                     : e664b40e-9049-11e1-0000-ef50e3502373
Instance ID                     : uuid:a9a52189-d3f0-4b63-bc00-efbb30e231e7
Format                          : application/pdf
Title                           : WPEA-127NI_v1.1
Creator                         : jane
Description                     : ()
Page Count                      : 9
Subject                         : 
Author                          : jane

EXIF Metadata provided by EXIF.tools