Stamina 55 5556B Owner S Manual STANDARD MANUAL_XP_07 23 2003_PNG

Stamina Products, Inc Fitness Equipment 55-5556 55-5556B

2014-07-06

: Stamina Stamina-55-5556B-Owner-S-Manual stamina-55-5556b-owner-s-manual stamina pdf

Open the PDF directly: View PDF PDF.
Page Count: 19

2040 N. Alliance, Springfield, MO 65803
Customer Service
1 (800) 375-7520
www.staminaproducts.com
This Product is Produced Exclusively by
Owner's
Manual
CAUTION:
Weight on this product should not exceed 300 lbs.
2010, 07 2010 Stamina Products, Inc.
Model#: 55-5556B
Patent Nos. D382,319
and 7,179,207.
Other patent(s) apply
& are pending
MADE IN CHINA
Product May Vary Slightly
From Pictured.
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not followed.
Keep others and pets away
from equipment when in use.
Always make sure all bolts and
nuts are securely tightened
prior to each use. Follow all
safety instructions in this
manual.
When calling for parts or
service, please specify the
following number.
WARNING
TABLE OF CONTENTS
2
Page Page
Before starting any exercise or conditioning program you should consult with your personal
physician to see if you require a complete physical exam. This is especially important if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW
THESE INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY.
SAFETY INSTRUCTIONS
WARNING:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
We recommend that two people be available for assembly of this product.
Read all warnings posted on the AeroPilates Pro XP556.
Read this Owner's Manual and follow it carefully before using the AeroPilates Pro XP556. Make
sure that it is properly assembled and tightened before use.
When exercising on this product, do not exercise at an intensity that causes the product itself to
move. This could result in damage to your joints and the product.
Keep children away from the AeroPilates Pro XP556. Do not allow children to use or play on the
AeroPilates Pro XP556. Keep children and pets away from the AeroPilates Pro XP556 when
it is in use.
It is recommended that you place this exercise equipment on an equipment mat.
Set up and operate the AeroPilates Pro XP556 on a solid level surface. Do not position the
AeroPilates Pro XP556 on loose rugs or uneven surfaces.
Make sure that adequate space is available for access to and around the AeroPilates Pro XP556.
Before using, inspect AeroPilates Pro XP556 for worn or loose components, and securely tighten
or replace any worn or loose components prior to use.
Consult a physician prior to commencing an exercise program. If, at any time during exercise, you
feel faint, dizzy, or experience pain, stop and consult your physician.
Follow your physician's recommendations in developing your own personal fitness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your
limits and train within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the AeroPilates Pro XP556.
Be careful to maintain your balance while using, mounting, dismounting, or assembling the
AeroPilates Pro XP556, loss of balance may result in a fall and serious bodily injury.
The AeroPilates Pro XP556 should not be used by persons weighing over 300 pounds.
The AeroPilates Pro XP556 should be used by only one person at a time.
The AeroPilates Pro XP556 is for consumer use only. It is not for use in public or semipublic
facilities.
WARNING:
To reduce the risk of serious injury, read the following Safety Instructions before
using the AeroPilates Pro XP556.
Maintenance 12
Conditioning Guidelines 13
Warm-Up and Cool-Down 14
Warranty 15
Product Parts Drawing 16
Parts List 17
Fax/Mail Ordering Form 19
Safety Instructions 2
Before You Begin 4
Equipment Warning & Notice Labels 5
Hardware Identification Chart 6
Assembly Instructions 7
Operational Instructions 10
Storage 12
WARNING: This product contains a chemical known to the State of California to cause cancer
and birth defects or other reproductive harm.
3
THANK YOU FOR PURCHASING THE
AeroPilates Pro XP556
To help you get started, we have pre-assembled most of your
AeroPilates Pro XP556 at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts, you will be getting your body into shape
and be on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.
Friday, 8:00 A.M. - 3:00 P.M., Central Time.
CALL US FIRST
Customer Service
1(800) 375-7520
www.staminaproducts.com
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
CUSTOMER SERVICE
Fax: (417) 889-8064
MAIL
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
ONLINE
CUSTOMER SERVICE
customerservice@staminaproducts.com
www.staminaproducts.com
4
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY :
BEFORE YOU BEGIN
Rope
Front Wooden
Platform
Front Brace
Pulley Post
Rear Leg
Hand Strap
Tension Cord
Front Right Rail
Plastic Snap Hook
Carriage
Cushion
Foam Pad
Headrest
Hand Strap
Cardio
Rebounder
Rope
Warning
Label
Rear Wooden
Platform
Pulley Set
Wheels
Right Footbar Support
Thank you for choosing the AeroPilates Pro
XP556. We take great pride in producing this quality
product and hope it will provide many hours of quality
exercise to make you feel better, look better and enjoy
life to its fullest.
Yes, it's a proven fact that a regular exercise
program can improve your physical and mental
health. Too often, our busy lifestyles limit our time
and opportunity to exercise. The AeroPilates Pro
XP556 provides a convenient and simple method to
begin your assault on getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the
AeroPilates Pro XP556.
Although Stamina constructs its products with the
finest materials and uses the highest standards of
manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
the parts included with your AeroPilates Pro
XP556, please do not return the product. Contact us
FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to assist you from 7:30 A.M.
to 5:00 P.M. (Central Time) Monday through Thursday
and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
If you would like to contact us online, go to our
website at www.staminaproducts.com and access the
Customer Service section.
Be sure to have the name and model number of
the product available when you contact us.
Adjustment Knob
Allen Wrench (5mm)
Allen Wrench (6mm)
Allen Wrench (8mm)
Combination Wrench
Rear Brace
Front Leg
5
EQUIPMENT WARNING & NOTICE LABELS
This chart is provided to help identify the warning & notice labels on the AeroPilates Pro XP556. Please
take a moment to familiarize yourself with all of the warning & notice labels.
Label is larger than actual size
WARNING LABEL(75)
W1
6
Part No. and Description Qty
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the
length of the bolts and screws.
NOTICE: The length of all bolts and screws except those with flat heads is
measured from below the head to the end of the bolt or screw.
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.
mm.
in.
INCHES
MILLIMETERS
11/2021/2 31/2 41/2 51/2 61/2
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
6 8 10 12
3/16" 5/16" 1/2"3/8"1/4"
length
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
52 Bolt, Button Head (M8 x 1.25 x 20mm) 16
53 Bolt, Button Head (M8 x 1.25 x 24mm, with threadlocker) 4
54 Bolt, Button Head (M8 x 1.25 x 30mm) 4
56 Bolt, Button Head (M8 x 1.25 x 42mm) 2
57 Bolt, Socket Head (M10 x 1.5 x 35mm) 1
51 Bolt, Button Head (M8 x 1.25 x 10mm, with threadlocker) 24
67 Nylock Nut (M8 x 1.25) 2
70 Arc Washer (M8) 2
73 Washer (M8) 2
ASSEMBLY INSTRUCTIONS
7
1.
2.
REAR
FRONT
Mark "A"
NOTE: We recommend that two people be available for assembly of this product.
STEP 1
Refer to illustration 1. To connect the RAILS: Insert the CONNECTING BRACKETS(11) into the FRONT
LEFT RAIL(7) and FRONT RIGHT RAIL(8) and secure with BUTTON HEAD BOLTS(M8x1.25x10mm)(51).
Do not tighten the bolts until STEP 2.
STEP 2
Insert the CONNECTING BRACKETS(11) into the REAR LEFT RAIL(9) and REAR RIGHT RAIL(10) and
secure with BUTTON HEAD BOLTS(M8x1.25x10mm)(51). Tighten all of the bolts.
STEP 3
Refer to illustration 2. There is an "A" decal on the STOP BRACKET A(22) and a "B" decal on the STOP
BRACKET B(23). Move the CARRIAGE(25 ) toward the REAR BRACE(12). Attach the STOP BRACKET
A(22) to the FRONT RIGHT RAIL(8) with BUTTON HEAD BOLTS(M8x1.25x24mm)(53). Attach the STOP
BRACKET B(23) to the FRONT LEFT RAIL(7) with BUTTON HEAD BOLTS(M8x1.25x24mm)(53).
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please call
our toll-free number for assistance 1-800-375-7520 or e-mail us at: customerservice@staminaproducts.com
ASSEMBLY INSTRUCTIONS
8
STEP 4
Slide the FRONT LEG(2) onto the FRONT BRACE(1) as shown in the illustration and secure with BUTTON
HEAD BOLTS(M8x1.25x20mm)(52). Do not tighten bolts until STEP 5 is complete.
STEP 5
Slide the REAR LEG(13) onto the REAR BRACE(12) as shown in the illustration and secure with BUTTON
HEAD BOLTS(M8x1.25x20mm)(52). Tighten all of the bolts.
STEP 6
Attach the FRONT WOODEN PLATFORM(3) to the top of the FRONT LEG(2) with BUTTON HEAD BOLTS
(M8x1.25x30mm)(54).
Attach the REAR WOODEN PLATFORM(14) to the top of the FRONT LEG(13) with BUTTON HEAD
BOLTS(M8x1.25x30mm)(54).
STEP 7
Attach the WHEELS(6) to the FRONT LEG(2) with BUTTON HEAD BOLTS(M8x1.25x42mm)(56),
WASHERS(M8)(73), and NYLOCK NUTS(M8x1.25)(67).
ASSEMBLY INSTRUCTIONS
9
STEP 9
Insert the PULLEY POST(36) into the REAR WOODEN PLATFORM(14) and secure with SOCKET
BOLT(M10x1.5x35mm)(57). Insert the PULLEY SETS(38) through the PULLEY SPACERS(39) and the
PULLEY POST(36) and secure with ADJUSTMENT KNOBS(40) and ARC WASHERS(M8)(70).
STEP 10
Screw the two FOAM PADS(34) into the CARRIAGE(25).
STEP 11
The FOOTBAR(17) and the CARDIO REBOUNDER(46) cannot be used at the same time. For cardio
workouts, install the CARDIO REBOUNDER(46) and for Pilates workouts, install the FOOTBAR(17).
Refer to the inset drawing. To install the CARDIO REBOUNDER(46), insert the CARDIO REBOUNDER
(46) posts into the holes in the FRONT WOODEN PLATFORM(3).
3.
To install the FOOTBAR(17), insert the FOOTBAR(17) into the LEFT and RIGHT FOOTBAR SUPPORTS
(15, 16). Lock the FOOTBAR(17) in position with the PULL PINS(85) on both sides.
1.
To remove the FOOTBAR(17), remove the PULL PINS(85) on both sides. Grasp the FOOTBAR(17) on
both sides, pull up, and remove. Store the PULL PINS(85) by inserting them back into the holes on the
LEFT and RIGHT FOOTBAR SUPPORTS(15, 16).
2.
10
ROPE LENGTH ADJUSTMENT
The ROPES(41) feed through the PULLEY SETS(38) then thread through the loops on the underside of
both outer edges of the CARRIAGE(25). PLASTIC SNAP HOOKS(42) on the end of each rope are used to
adjust the ROPE(41) length. If more length is needed, attach the PLASTIC SNAP HOOKS(42) to loop D. To
shorten, bring the ROPES(41) around the last loop D and secure to loops A, B, or C with the PLASTIC
SNAP HOOKS(42). Wrap ROPES(41) through the loops and attach where needed to shorten ROPES(41)
even more.
B
D
C
A
OPERATIONAL INSTRUCTION
LOAD ADJUSTMENT
The resistance of the CARRIAGE(25) can be adjusted by securing the TENSION CORDS(29) in the slots
on the CORD HOLDER(21). You can achieve various levels of resistance by securing different numbers of
the TENSION CORDS(29) in the slots.
NOTE: Over time your TENSION CORDS(29) will relax. To increase resistance in the TENSION CORDS(29),
stretch and re-tie the tension cords in a more taut position.
11
FORWARD
POSITION
PIN
SLOT
Support
Bracket
OPERATIONAL INSTRUCTION
HEADREST ADJUSTMENT
The HEADREST(32) on the CARRIAGE(25) can be positioned
flat or at an incline by simply pivoting the support bracket
underneath the HEADREST(32).
FOOTBAR ADJUSTMENT
The FOOTBAR(17) can be positioned at three angles. Lift the
FOOTBAR(17) until the pins come out of the slots on the FRONT
BRACE(1). Move the FOOTBAR(17) to the desired position and
lock the FOOTBAR(17) in position by pushing it down so that the
pins are in the slots on the FRONT BRACE(1).
NOTE:
PULLEY ADJUSTMENT
There are three adjustment holes on each side of the PULLEY
POST(36) for attaching the PULLEY SETS(38) in different widths.
Remove the ADJUSTMENT KNOBS(40) and ARC WASHERS
(M8)(70) from the PULLEY POST(36). Attach the PULLEY
SETS(38) to the position you want and secure with the
ADJUSTMENT KNOBS(40) and ARC WASHERS(M8)(70).
NOTE:
Always make sure the pins are locked into the slots properly.
Use forward position of the FOOTBAR(17) when standing on
the AeroPilates Pro XP556 with one foot on the FRONT
WOODEN PLATFORM(3).
1.
2.
Always use the same adjustment holes for both sides.
STORAGE
Store the AeroPilates Pro XP556 in a clean, dry place.
It is recommended that two people be available to move the AeroPilates Pro XP556.
To move the AeroPilates Pro XP556: First, attach one of the TENSION CORDS(29) in the slot on
the CORD HOLDER(21) to prevent the CARRIAGE(25) from moving. Second, grasp the PULLEY
POST(36) and lift the unit from the back. Third, roll the AeroPilates Pro XP556 on the moving wheels
that are attached to the FRONT LEG(2).
1.
2.
3.
MAINTENANCE
The safety and integrity designed into the AeroPilates Pro XP556 can only be maintained when the
AeroPilates Pro XP556 is regularly examined for damage and wear. Special attention should be given to
the following:
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components should be replaced immediately or the AeroPilates Pro XP556 removed
from service until repair is made.
Verify that the WARNING LABEL(75) is present and legible. Replace the WARNING LABEL(75) if it is
missing or damaged.
Verify that the ROPES(41) are properly installed on the PULLEY SETS(38).
Check the condition of the ROPES(41) and replace if they are frayed or worn.
Check the PLASTIC SNAP HOOKS(42) on the ends of the ROPES(41). Replace the ROPES(41) if
PLASTIC SNAP HOOKS(42) are damaged or deformed.
Check the TENSION CORDS(29). If a TENSION CORD(29) is stretched and loose, re-tie the knot on
the end of the cord. Replace TENSION CORDS(29) that are frayed or worn.
Check the BUNGEE CORD(48) on the CARDIO REBOUNDER(46) for wear. Replace the CARDIO
REBOUNDER(46) if the BUNGEE CORD(48) is frayed or worn.
Check the PULLEY SETS(38) for excessive wear. Replace worn PULLEY SETS(38).
Check the HAND STRAPS(43) for damage. Replace damaged parts.
Check the FOAM SLEEVE(18) and FOAM PADS(34) and replace if damaged or worn.
Check the STOP PLATES(22, 23) for looseness or damage and replace any damaged parts.
Check the CUSHION(28) and replace if it is damaged or worn.
Check and clean the ROLLERS(26) and the rolling surfaces on the rails. Clean by wiping with a dry
cloth.
Only Stamina Products supplied components shall be used to maintain/repair the AeroPilates Pro
XP556.
Keep your AeroPilates Pro XP556 clean by wiping with an absorbent cloth after use.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
12
13
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually, too, by monitoring your heart rate while you exercise.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise so
you don’t tire too quickly.
Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or three
fingers on your wrist and take a six second heartbeat count. Multiply the
results by ten to find your heart rate. For example, if your six second heartbeat
count is 14, your heart rate is 140 beats per minute. A six second count is
used because your heart rate will drop rapidly when you stop exercising.
Adjust the intensity of your exercise until your heart rate is at the proper level.
wrist pulse
Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity and
build up to higher intensity as you become more aerobically fit.
If you feel dizzy or lightheaded you should slow down or stop exercising.
Target Heart Rate Zone Estimated by Age*
Remember to follow these essentials:
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table below.
For effective aerobic exercise, your heart rate should be maintained at a level between 60% and 90% of
your maximum heart rate. If just starting an exercise program, work out at the low end of your target heart
rate zone. As your aerobic capacity improves, gradually increase the intensity of your workout by increasing
your heart rate.
For cardiorespiratory training benefits, the American College of Sports Medicine recommends working
out within a heart rate range of 55% to 90% of maximum heart rate. To predict the maximum heart
rate, the following formula was used: 220 - Age = predicted maximum heart rate
*
20 years
25 years
30 years
35 years
40 years
45 years
50 years
55 years
60 years
65 years
70 years
Target Heart Rate Zone
(55%-90% of Maximum Heart Rate) Average Maximum
Heart Rate 100%
Age
110-180 beats per minute
107-175 beats per minute
105-171 beats per minute
102-166 beats per minute
99-162 beats per minute
97-157 beats per minute
94-153 beats per minute
91-148 beats per minute
88-144 beats per minute
85-139 beats per minute
83-135 beats per minute
200 beats per minute
195 beats per minute
190 beats per minute
185 beats per minute
180 beats per minute
175 beats per minute
170 beats per minute
165 beats per minute
160 beats per minute
155 beats per minute
150 beats per minute
14
WARM-UP and COOL-DOWN
Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm
up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise your
heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump
rope, and running in place
Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength
or aerobic training session is very important. Muscles stretch more easily at these times because of their
elevated temperature, which greatly reduces the risk of injury. Stretches should be held for 15 to 30 seconds.
Do not bounce.
Suggested Stretching Exercises
Remember always to check with your physician before starting any exercise program.
Cool-Down The purpose of cooling down is to return the body to its normal, or near normal, resting state
at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to
return to the heart. Your cool-down should include the stretches listed above and should be completed after
each strength-training session.
Lower Body Stretch
Place feet shoulder width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
DO NOT BOUNCE!
When the pull on the back of
the legs lessen, try a lower
position gradually.
Floor Stretch
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to the
left leg. Do this stretch
several times slowly.
Bent Torso Pulls
While sitting on the floor,
have legs apart one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and 5 years on the
frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT
APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE,
ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAIR,
REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED BY STAMINA
PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health clubs, spas,
gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the product's use is
in furtherance of a profit making enterprise, and all other use which is not for personal, family, or household
purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase and
a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield
Missouri, USA, 65801-1071, or email us at customerservice@staminaproducts.com, or call us at
1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to return the
product or part to us for free repair or replacement at our option. NO ACTION FOR BREACH OF THIS
LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE DATE THE
ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR BREACH OF
ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER DELIVERY OF
THE PRODUCT TO THE PURCHASER. This limited warranty is not transferable. IF ANY PART OF THE
PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY,
THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY AVAILABLE TO YOU. In
the event that the purchaser makes any claim under this limited warranty or any implied warranty, the Warrantor
reserves the right to require the product to be returned for inspection, at the purchaser's expense, to the
Warrantor's premises in Springfield, Missouri. Return of the enclosed warranty registration card is not required
for warranty coverage, but is merely a way of establishing the date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY IMPLIED
WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This warranty
gives you specific legal rights, and you may also have other legal rights which vary from state to state.
ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to
disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any
such law is found to be applicable, the foregoing disclaimers and limitations of and on implied warranties and
consequential and incidental damages with respect thereto shall be disregarded and shall be deemed not to
have been made to the extent necessary to comply with such legal restriction.
15
WARRANTY
LIMITED WARRANTY MODEL 55-5556B
PRODUCT PARTS DRAWING
16
FRONT
BACK
PARTS LIST
DIAGRAM# PART NAME QTY
17
1 Front Brace 1
2 Front Leg 1
3 Front Wooden Platform 1
4 Stand Cap 4
5 Support Cap 4
6 Wheel 2
7 Front Left Rail 1
8 Front Right Rail 1
9 Rear Left Rail 1
10 Rear Right Rail 1
11 Connecting Bracket 2
12 Rear Brace 1
13 Rear Leg 1
14 Rear Wooden Platform 1
15 Left Footbar Support 1
16 Right Footbar Support 1
17 Footbar 1
18 Foam Sleeve 1
20 Support Plate 2
21 Cord Holder 1
22 Stop Bracket A 2
23 Stop Bracket B 2
24 Bumper 4
25 Carriage 1
26 Roller 4
27 Roller Spacer 4
28 Cushion 1
29 Tension Cord 4
30 Support Bushing 4
31 Stop Bushing 4
32 Headrest 1
33 Foam Pad Tube 2
34 Foam Pad 2
35 Foam Cap 2
36 Pulley Post 1
37 Round Plug (42mm) 2
38 Pulley Set 2
39 Pulley Spacer 2
40 Adjustment Knob 2
41 Rope 2
42 Plastic Snap Hook 2
43 Hand Strap 2
44 Foot Strap 1
45 Buckle 1
46 Cardio Rebounder 1
47 Cardio Rebounder Mat 1
48 Bungee Cord 1
49 Bumper Sleeve 2
PARTS LIST
DIAGRAM# PART NAME QTY
18
50 Bolt, Button Head (M6 x 1 x 10mm) 2
51 Bolt, Button Head (M8 x 1.25 x 10mm, with threadlocker) 24
52 Bolt, Button Head (M8 x 1.25 x 20mm) 16
53 Bolt, Button Head (M8 x 1.25 x 24mm, with threadlocker) 8
54 Bolt, Button Head (M8 x 1.25 x 30mm) 4
55 Bolt, Button Head (M8 x 1.25 x 28mm) 4
56 Bolt, Button Head (M8 x 1.25 x 42mm) 2
57 Bolt, Socket Head (M10 x 1.5 x 35mm) 1
58 Bolt, Hex Head (M8 x 1.25 x 12mm, with threadlocker) 4
59 Bolt, Hex Head (M8 x 1.25 x 50mm) 8
60 Bolt, Round Head (M8 x 1.25 x 25mm) 4
61 Bolt, Flat Head (M10 x 1.5 x 42mm) 4
62 Screw, Flat Head (M5 x 0.8 x 25mm) 3
63 Screw, Round Head (M6 x 1 x 10mm) 4
64 Screw, Round Head (M4 x 18mm) 1
65 Nut (M8 x 1.25) 4
66 Nylock Nut (M5 x 0.8) 7
67 Nylock Nut (M8 x 1.25) 2
68 Nylock Nut (3/8"-16) 2
69 Acorn Nut (M5 x 0.8) 4
70 Arc Washer (M8) 2
71 Lock Washer (M8) 4
72 Washer (M5) 7
73 Washer (M8) 18
74 Washer (3/8") 2
75 Warning Label 1
76 Allen Wrench (5mm) 1
77 Allen Wrench (6mm) 1
78 Allen Wrench (8mm) 1
79 Combination Wrench 1
80 Manual 1
81 Workout Chart 1
82 Introduction to AeroPilates (DVD) 1
83 AeroPilates Level 1: Simply Cardio Workout (DVD) 1
84 AeroPilates Level 1: Pure Pilates Workout (DVD) 1
85 Pull Pin 2
IMPORTANT : Before filling out the form below make sure you have the right information.
Refer to the parts list to make sure you're ordering the right parts!
Detach and Mail or Fax the Form Below
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
IMPORTANT : We must have your phone number in order to process the order!
FAX/MAIL ORDERING FORM
Please do not return the product. For your convenience, Stamina's Customer Service Department can be
reached by email at customerservice@staminaproducts.com or toll free at 1-800-375-7520 (in the U.S.).
Should a part be missing or a defective part found, please call us from 7:30 A.M. to 5:00 P.M. Central Time,
Monday through Thursday and 8:00 A.M. to 3:00 P.M. on Friday or fill out the fax sheet ordering form below
and fax it to (417) 889-8064. Our Customer Service Department will be able to assist you with your problem
and the part will be mailed directly to your house.
Mr./Ms:
Address: Apt. #:
City: State: Zip Code:
Phone #: ( ) Work Phone #: ( )
Date Purchased:
Model #:
Purchased From:
PART # DESCRIPTION QUANTITY
1 Rear Unit Assembly 1
EXAMPLE:
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
CUSTOMER SERVICE
Fax: (417) 889-8064
MAIL
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
ONLINE
CUSTOMER SERVICE
customerservice@staminaproducts.com
www.staminaproducts.com

Navigation menu