Stanley Black and Decker 09472-81539 Cordless inspection camera User Manual

Stanley Black & Decker Cordless inspection camera XXX manual camera DCT410 book indd

a href="https://usermanual.wiki/Stanley-Black-and-Decker" itemprop="url"> Stanley Black and Decker >

user manual

1EnglishThe term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.WORK AREA SAFETYa) Keep work area clean and well lit. Cluttered or dark areas invite accidents.b) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.PERSONAL SAFETYa) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.d) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.e) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Defi nitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.NOTICE: indicates a practice not related to personal injurywhich, if not avoided, may result in property damage.IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258). WARNING: To reduce the risk of injury, read the instruction manual.General Power Tool Safety WarningsWARNING! Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.SAVE ALL WARNINGS AND INSTRUCTIONSFOR FUTURE REFERENCE
2EnglishPOWER TOOL USE AND CAREa) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.b) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.c) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.d) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.e) Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Useof the power tool for operations different from those intended could result in a hazardous situation.BATTERY TOOL USE AND CAREa) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.c) When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.SERVICEa) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.Safety Information for Inspection CamerasWARNING: Do not disassemble or modify the inspection camera. There are no user serviceable parts inside. Serious eye injury could result.•Do not operate the inspection camera in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.•The inspection camera should only be used with specifically designated DEWALT batteries. Use of any other batteries may create a risk of fire.•Store the inspection camera out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.•Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified
Download:
Mirror Download [FCC.gov]
Document ID1334151
Application IDrdGCA+w1gLfveCUGEzUOtA==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize125.29kB (1566097 bits)
Date Submitted2010-08-27 00:00:00
Date Available2010-08-27 00:00:00
Creation Date2010-08-26 14:57:32
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2010-08-26 15:01:46
Document TitleXXX manual camera DCT410 book.indd
Document CreatorPScript5.dll Version 5.2
Document Author: admin
FCC ID Filing: YJ709472-81539

Navigation menu