Sunitec Enterprise BS004 Bluetooth Stereo Headset User Manual UM BS890 sunitec EN 130925

Download:
Mirror Download [FCC.gov]
Document ID	2088609
Application ID	PTTEE2J+cPDYBQ+4fPmnyg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.78kB (447303 bits)
Date Submitted	2013-09-30 00:00:00
Date Available	2013-09-30 00:00:00
Creation Date	2013-09-26 09:44:43
Producing Software	Corel PDF Engine Version 15.0.0.486
Document Lastmod	2013-09-26 09:44:43
Document Title	UM-BS890-sunitec-EN-130925
Document Creator	CorelDRAW X5
Document Author:	Administrator

4. Charging
1). First time, please charge the device for no less than 2 hours to make
sure the headset is fully charged and the battery reach it's full capacity.
2). Afterwards, each charge cycle may take 2 hours around.
3). LED will indicated red in charging and off when charging is complete.
4). If you have not use the item for a few months, LED might not turn red
when first charging. It might take few minutes before the LED turn red.
5). Low voltage of battery: When the voltage of the battery goes down to
3.3V, the red LED will flash every 10 seconds; when the voltage goes
down to 3.0V, the headset will power off automatically.
Notice: Suggest to use only the charger provided, do not use chargers
from any other devices as it might damage the device.
BS890
5. Turn On/Off
Bluetooth Stereo Headset
Comfortable Wearing for sports/outdoor use
Turn on: From off, press and hold the “MFB” for 3 seconds until blue LED
light 2 seconds.
Turn off: From On, press and hold the “MFB” for 3 seconds until red LED
light 2 seconds.
6. Pairing Bluetooth Headset to Mobile Phone
Pairing is the process of connecting your headset with your mobile
phone. Before using the headset with your mobile phone, you must pair
both devices. If you wish to use your headset with a different mobile
phone, you must reinstate the pairing process with your intended
Bluetooth mobile phone.
a). Ensure the headset is off.
b). Switch to pairing mode by holding into the “MFB” button for 6 seconds
until LED blinks Blue and Red alternately.
c). Turn on the mobile phone and place it within 1 meter to the headset.
d). Activate the Bluetooth function on your mobile phone and search for
accessible Bluetooth device by referring to your mobile phone user
guide for details.
e). Select “ BT Stereo” from the list.
f ). Enter the pre-programmed code “0000” and press “OK” to pair the
headset and the phone. When pairing is completed, the blue and red
LED stop flashing, the headset is under the standby mode with the blue
LED flashes in every 10 seconds.
g). Press “ Return” to go back to your mobile phone's main menu. Please
place the mobile phone and the headset within 10 meters sensing
distance. You should now be able to make and receive calls using
User Manual
1. About Bluetooth Technology
Bluetooth wireless technology is set to revolutionize the personal
connectivity. By providing freedom from wired connections-enabling
links and connectivity between mobile computers, mobile phones,
portable handheld devices and other Bluetooth enables devices within
10 meters. Utilizing global sound & digital data 2.4G ISM transmission,
it makes global communication in the way you've never dreamed of !
2. Product Description
Bluetooth Stereo Headset is a lightweight sport headphone with in ear
drivers, it features with fashionable sport design, and decent stereo
sound. Bluetoth Stereo Headset is the ideal choice for active pursuits
such as jogging and exercising.
3. Appearance and Function
your headset.
Note: If the pairing cannot be completed within 2 minutes after the
pairing mode is activated, the headset will power off automatically.
Please repeat steps above to pair the headset and mobile phone again.
Once paired and connected, the headset will be automatically connected
to your phone whenever you turn the headset on again.
7. Connection/Link between Headset and Mobile Phone
After paired is completed, headset is always under standby mode. Before
you place or answer a call, if the headset icon is not shown on phone
screen, please follow the steps below to activate the Bluetooth
connection/link through your mobile phone or headset until the
headset icon is on the screen.
1). On phone: Select the “BT Headset“ from the paired list on your phone
screen.
2). On headset: Turn on the headset again and the headset will connect
last paired device automatically.
8. Pairing and connection via NFC
NFC
(8)
(1)
(7)
(2)
(4)
(3)
(5)
(6)
(1). Multi-Function Button(MFB)
(2). Volume up (V+)
(3). Volume down(V-)
(4). Speaker
In order to have best sound
reception, recommend to
place the phone on the right
side per diagram presented
(5). Microphone
(6). Charging socket
(7). LED Indicator
(8). NFC Position
In standby mode, put the mobile phone closed to headset NFC position,
the headset will into pairing mode automatically and prompt
“are connect?” from mobile phone, then press “ OK” on phone
screen to connected with headset.
Headset closed to mobile phone again, will be disconnected automatically.
Closed again, will be connected automatically.
Note: Please make sure your mobile phone supporting NFC function.
Functionality varies depending on the mobile phone models. Please refer
to your mobile phone user guide for details.
9. Disconnection between Headset and Mobile Phone
When you need to connect your headset with another Bluetooth-enabled
mobile phone, please follow the steps below to disconnect the headset
with the pre-paired mobile phone.
1) Power off the Headset.
2) Select “ Disconnecting” on the Bluetooth device list of your mobile
phone to remove the connection.
Note: When losing the connection/link, the headset will be automatically
power off in 10 minutes.
10. Using the Headset
1). Answering calls:
When receiving a phone call, press the “MFB "button to answer a call.
2). Ending calls:
Press the “MFB "button to end a call.
3). Reject calls:
When receiving a phone call, press and hold “ MFB” button for 2 seconds
to reject the call.
4). Voice Dial:
If your mobile phone is voice dialing enabled, under standby mode,
press the “V+” and “V-“ buttons once and say the voice tag after you
hear a beep.
Note: Please make sure to record voice tag into the mobile phone before
using voice dial function. Functionality varies depending on the mobile
phone models. Please refer to your mobile phone user guide for details.
5). Last number Re-Dialing:
Under standby mode, short press the “MFB” button twice for last
number redial.
6). Adjusting the volume:
During a call , press the “V+” or “V-“ button repeatedly until you reach
the desired volume level.
7). Mute & Un-Mute (During a conversation):
Mute the microphone: press and hold “V-” button for 4 seconds.
Un-Mute: press and hold “V-“ button for 4 seconds again.
8). Transferring calls:
a. Headset to Mobile phone: During a call, press and hold the “MFB”
button for 3 seconds, the call is routed to your mobile phone.
b. Mobile phone to Headset: Press and hold the “MFB” button to route
the call to headset.
9). Reject the second call:
During a call, short press “V+” button once to reject the second
incoming call.
10). Hold the call:
During a call, short press the “MFB“ button twice to hold the phone call.
Short press the “MFB” button twice again to resume conversation.
11). Answer the second call:
a. During conversation in progress, short press the “MFB” button once
to pick up the second call and ending the first call.
b. During conversation in progress, short press the “MFB” button twice
to pick up the second call and first call on hold.
12). Switch between 2 phone calls:
During two calls in progress, short press the “MFB” button twice to
swap calls.
11. Music Streaming
Your Bluetooth Stereo Headset is capable of high fidelity stereo playback
on A2DP enabled mobile phones/Audio devices. Please refer to your
mobile phone/Audio device user guide for more information.
1). Start Audio Playback:
Press “MFB” button once to play music.
To Pause, simple press “MFB” button once again.
2). Previous/Next Track:
Previous Track: Long press the volume“V -” button for 2 seconds;
Next Track: Long press the volume“V +”button for2 seconds.
3). Adjusting the Volume:
During music playing, press the “V+” or “V-“ button repeatedly until
you reach the desired volume level.
4). Answering a call when playing music:
Press the “MFB” button and the call will be connected. Audio playback is
put on mute when there are incoming calls from the active connection.
The audio playback resumes as soon as the call is terminated.
(Dependent on your device supporting this feature).
12. Restore the factory default settings
To restore your headset to its factory default setting, press and hold “V+”
or “V-“ button for 8 seconds until both Blue & Red LED flash alternately,
then press “MFB” button for 3 seconds to power off the headset to
completed the setting.
13. Care and Maintenance
1). Consider turning your headset off before placing it in your pocket or
bag. If the “MFB” is accidentally depressed, your mobile handset may
place an unintended call.
2). Do not expose the headset to liquid, moisture or humidity, as it is not
waterproof.
3). Do not use abrasive cleaning solvents to clean the headset.
4). Do not place the headset in high temperature, as it will result in an
explosion.
5). Do not expose the headset to contact with sharp objects as this will
cause scratching and damage.
6). Do not stick anything inside the headset as this may damage internal
components.
7). Do not attempt to disassemble the headset, as it does not contain
serviceable components.
14. Safety Information
1). Check local laws regarding use of a mobile handset and headset while
driving. If you use the headset while driving, ensure your attention and
focus remains on your responsibility of driving safety.
2). Never allow children to play with the headset. Small parts may be a
choking hazard.
3). Observe all signs that require an electrical device or RF radio product
to be switched off in the designated areas. These could include
hospitals, blasting areas, and potentially explosive atmospheres.
4). Turn off your headset prior to boarding an aircraft. Do not use your
headset in an aircraft.
5). Never mount or store your headset over any air bag deployment area
serious injury may result when an air bag deploys.
6). Do not open or mutilate the built-in battery.
15. LED Indication
Power off mode
Power on
Power off
Standby Mode
Standby Mode (Disconnect
Bluetooth device)
Standby in low voltage
Talking in low voltage
Talking in progress
Pairing in progress
Mute
Charging in progress
Charging completed
Restore the default settings
LED off
Blue LED lights 2 seconds
Red LED lights 2 seconds
Blue LED flashes 1 times every 10 seconds
Blue LED flashes twice every 10 seconds
Red LED flashes every 10 seconds
Red LED flashes twice every 15 seconds
Blue LED flashes twice every 15 seconds
Red & Blue LED flash alternately
Blue LED flashes twice every 15 seconds
Red LED steady on
LED off
Red & Blue LED flash alternately
16. Product Specifications
- Bluetooth compatible specifications: V2.1+EDR
- Operating frequency band: 2.402GHz~2.480GHz
- Output power: Class 2 Power output, up to 10 meters
- Support profiles: HSP and HFP1.5 and A2DP and AVRCP profiles
- Support multipoint paired device: up to 8 bluetooth phone can be paired
- NFC: Near Field Communication
- Power input voltage: DC 5V
- Battery: 3.7V/100mAh(Rechargeable lithium polymer)
- Charging time: 2 hours
- Talk time: up to 5 hours
- Play music time: up to 5 hours
- Standby time: up to 150 hours

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2013:09:26 09:44:43+08:00
Modify Date                     : 2013:09:26 09:44:43+08:00
Producer                        : Corel PDF Engine Version 15.0.0.486
Author                          : Administrator
Creator                         : CorelDRAW X5
Title                           : UM-BS890-sunitec-EN-130925

EXIF Metadata provided by EXIF.tools