Nss Predator Cxc100 Carpet Extractor Parts And Operator Manual

: Sweepscrub Nss-Predator-Cxc100-Carpet-Extractor-Parts-And-Operator-Manual nss-predator-cxc100-carpet-extractor-parts-and-operator-manual 1632 file product_file

Open the PDF directly: View PDF .
Page Count: 8

PREDATOR CXC100

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS

BEFORE OPERATING OR SERVICING MACHINE

DANGER!

Failure to Observe These Instructions Can Cause Personal Injury

to Machine Operator, By-standers or Possible Machine Damage.

SAVE THESE INSTRUCTIONS

•NEVER attempt to service or perform maintenance functions while machine is plugged into an electrical

outlet.

•ALWAYS unplug machine before attempting to service the motorized brush attachment.

•NEVER operate in standing water. NEVER expose to rain. ALWAYS store indoors.

•NEVER overfill recovery tank or allow water to enter vacuum standpipe. This will cause damage to the

vacuum motor and possible electrocution.

•NEVER operate machine with a cut, abraded or taped cord.

•NEVER operate machine with a broken grounding blade on the plug.

•ALWAYS replace the entire cord when the cord or plug is damaged in any manner.

•NEVER handle the machine, cord or plug with wet hands.

•NEVER drop or insert any object into any machine opening.

•ALWAYS keep face, fingers, hair or any other body part, or loose clothing away from any machine

opening or any moving part, particularly the revolving brush.

•NEVER leave the machine unattended when plugged in. Unplug the machine from the electrical outlet

when not in use.

•ALWAYS turn the machine off before unplugging it from the electrical outlet.

•NEVER operate this machine in the presence of flammable or combustible liquids or fumes.

• When any electrical motor, switch, cord or plug service is required, maintenance should only be done by

an authorized service station, an electrician or other qualified persons.

•NEVER operate this machine if it is not working properly, if it as been dropped, damaged, exposed to

weather, or dropped into water. Return the machine to a service center for examination and repair.

•NEVER operate this machine with any air opening blocked. Keep all air openings free of dust, lint, hair,

ect.

•NEVER operate this machine without solution tank filter screens or vacuum standpipe filter screen in

place or if they are clogged. Clean all filter screens after every use.

•ALWAYS store this machine indoors. Protect it from rain or snow.

•NEVER spray the top of the machine with liquids.

•DO NOT pull or carry this machine by the electrical supply cord, use the cord as a handle, close a door on

the cord, pull the cord around sharp edges or corners, or expose to heated surfaces.

•NEVER disconnect the plug by pulling on the cord. To disconnect the cord from the outlet grasp the plug,

not the cord.

•ALWAYS unplug this machine before attempting to service.

•ALWAYS use a defoamer which will prevent a buildup of foam in the recovery tank. If a defoamer is not

used, the motor can be damaged from shampoo being pulled into the vacuum motor.

INFORMATION & OPERATING INSTRUCTIONS

DO NOT OPERATE MACHINE UNTIL YOU HAVE READ THIS SECTION

IMPROPER USE OF THE PREDATOR CXC100 WILL VOID THE WARRANTY

1. Always use defoamer when foaming occurs to prevent vac motor damage.

2. To keep fitting and lines from damage during freezing conditions, use an

anti-freeze in the pump or keep equipment inside heated areas.

3. All extension cords must be at least size #12 (12/3) and no longer than 50 ft.

4. Do not let pump run dry.

5. Use neutral pH, water-based products only - NO SOLVENTS!

INSPECTION:

Carefully unpack and inspect the PREDATOR CXC100 for shipping damage. Each unit is tested

and inspected before shipment. Any damage incurred during shipping is the responsibility of

the carrier, who should be notified immediately.

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals. Powders may be used, but unless mixed very

thoroughly, they could cause build-up in the lines, pump, quick-disconnects, etc. A pH of 7-9 is

strongly recommended to avoid premature pump wear, which would void the warranty.

MAINTENANCE:

For optimum performance, flush the machine with clear water at the end of each working day.

Once a month, minimum, run a flushing compound through the machine to cut any alkaline

build-up that may have formed.

Lubricate wheels, casters and hinges as needed. The pump and vacuum motors do not require

any maintenance.

The body can be cleaned with a general all-purpose detergent and protected with a silicone

type product like Armor All®. The quick-disconnects should be lubricated with silicone, also.

Prior to each job, inspect the holding tank filter and the recovery tank float filter for hair and dirt.

The drain valve should also be inspected regularly and kept free of any debris or build-up.

SET-UP:

Fill the holding tank with clear water and add the detergent of your choice. Mix well. Plug in the

electrical cord and turn on the pump and vacuum switches. You are now ready to begin cleaning.

PUMP OPERATION:

The 100 PSI-pump is a "demand" type design. The pump runs only when you depress the lever

on your wand. When you release the lever the pump shuts off.

VACUUM OPERATION:

A switch is provided for each vacuum motor. The machine can operate on either one or two vac

motors. A patented vacuum manifold reduces the oscillations between the two vacuum motors in

series, thereby increasing the efficiency and life of the vacuum motors.

BALL FLOAT VAC SHUTOFF:

When the recovery tank is full, the float system will shut off the incoming air flow and prevent

water from entering the vacuum motors. The float may not work properly if the float filter is

clogged or if there is heavy foam in the tank.

CAUTION: To avoid vac motor damage, a

lways make sure the float filter is clean and the ball

travels freely before turning on the machine. U

se a defoamer whenever foam is present.

DOME (RECOVERY TANK)

VAC INTAKE

DRAIN VALVE

LIFT HANDLE

QUICK-DISCONNECT

LATCH (2)

3" CASTORS

8" WHEELS

HOLDING TANK LID

VENT

SWITCH PLATE

ITEM # PART # DESCRIPTION ITEM # PART # DESCRIPTION

#1 4091011 Metal “T” Handle

#1A 4091231 Drain Gate

#2 4090581 Screw, 10-32 X 5/8, S/S

#3 4091251 Latch

#4 4091161 O-Ring, Thin

#4A 4091171 O-Ring, Thick

#4B 4090701 Nut, Cast Aluminum

#5 4091661 Vacuum Tank, Black, specify model

#6 4091241 Hose Barb, 1-1/2”

#7 4091291 PVC Elbow, 1-1/2”

#8 4091391 Gasket, for Vacuum Dome

#9 4091581 Vacuum Dome

#10 4091571 Vac Shut-off, manifold Assy.

#10A 4091501 Ball & Cage

#11 4090701 Nut, Cast Aluminum

#12 4091171 O-Ring, Thick

#13 4091291 PVC Elbow, 1-1/2”

#14 4091121 Hose Clamp, size 28

#15 4091551 Hose, Rubber, 2” X 20”

#15A 4091561 Hose, Rubber, 2” X 16”

#16 4091211 Vacuum Motor, 2-stage, 120V

4092101 Vacuum Motor, 2-stage, 240V

#16A 4091431 Gasket, Vac Motor

#17 9120900 1/4-20 Hex Nut w/ Ny-Lok

#18 9120930 3/16 Flat Washer, ZP

#19 4090621 1-1/4-20 X 3-1/2” Hex Bolt

#19A 9120920 1/4” Hex Nut, Finish

#19B 9120880 1/4 Split Lock Washer

#20 4091181 Split Ring

#21 4091631 Stop Chain, 13”

#22 4091651 Manifold, Vacuum, #3 or #4

#22A 4091651 Manifold, Vacuum, #3 or #4

#23 4091411 Exhaust Flange

#24 4090601 1/4-20 X 3/4” Screw, Flathead Phillips

#25 4091401 Handle, Chrome

#26 4091031 Quick Disconnect, male, 1/4 p.t.

#27 9122470 Washer, Brass, 1” X 9/16 ID X 1/16”

#28 4091311 Louver, 3” (includes 3 screws)

#29 4091261 Latch Strike

#30 4091511 Base, CXC & CXH (specify)

#31 4091351 Castor, 3” Swivel

#31A 9120900 1/4 Hex Nut, Ny-Lok, ZP

#32 4090611 1/3-20 X 3/4” Hex Bolt, ZP

#33 4091141 Axle Bracket

#34 9120900 1/4 Hex Nut, Ny-Lok, ZP

#35 4091361 Wheel, 8 inch, non-marking

#36 4091021 Axle Cap

#37 4091271 Axle, 1/2” X 18-13/16”

#38 4091331 PVC Reducer

#39 4091641 Holding Tank

#40 4091191 Filter, Pump Inlet, 40 Mesh, S/S

#41 4091601 Lid, with hinges and Label

#42 4090101 Switch Plate, (empty) CXC100

#42A 4090511 #4 X 3/8” Screw, Panhead, S/S

#43 4091041 Switch, SPST, Covered, w/light

#43A 4091041 Switch, SPST, Covered, w/light

#43B 4091041 Switch, SPST, Covered, w/light

#44 4091381 Pump, 100 PSI, 120V

4092121 Pump, 100 PSI, 240V

4091481 Rebuild Kit for 100 PSI pump

#45 4091131 Hose Clamp, 3/8-7/8

#46 4091101 Hose Barb & Elbow, plastic

#47 4091531 Hose, Rubber, 3/8 X 13”

#48 4092041 Hose, Rubber, 3/8” X 22”

#49 4091441 Fan, Cooling, 100CFM, 120V

4092131 Fan, Cooling, 100CFM, 240V

#50 4091451 Fan Guard

#51 4090541 6-32 X 2” Screw, Panhead, S/S

#52 4090531 6-32 Hex Nut, Ny-Lok, ZP

#53 4091521 Cord Wrap, Black

#54 1391161 Washer, Plastic, 5/8OD X3/8ID X 1/16

#55 4090671 3/8 Acorn Nut, Nickel Plated

#56 4090061 Label, CXC100, NSS

#57 4091081 Elbow, Brass, Street

#58 4093011 Hose Barb, 1/4 mpt X 3/8 hose

#59 4091611 Gasket

NOT SHOWN

4090251 Power Cord, 120V

4090261 Power Cord, 240V

PREDATOR CXC100

PARTS LIST

PREDATOR CXC100

PREDATOR CXC100

4A

5

7

8

9

12

14 15

14

15A

21

14

20

18

17

16

16A

22

19

19B

19A

19

16A

22A

19B

19A

18

17

16

25

24

26 27

28

29

37

35

36

34 33

32

32

30

31

31A

23

14

41

42

42A

43A

43B

43

52

56

59

64B

1A

14

4B

2

3

51

50

49

39

40

54

55

13

10 11

10A

53

38

57

45

45

44

46

46

47

48

58

28

28

COMMON STAINS AND CLEANING TREATMENTS

TREATMENT METHODS

First: Remove excess material by blotting to absorb liquids, or by scraping with a dull edge

(butter knife) is a solid.

Second: Clean the remaining stain as directed by the chart below. Always follow the direction

on the container. Apply the cleaning material directly to the stain (avoid over wetting

the carpet or upholstery), then remove the loosened stain material with a white ab-

sorbent cloth or tissue.

Third: When the carpet is dry, gently brush the carpet pile to restore its appearance.

Note: Treat unknown stains with a volatile solvent first and follow with other agents as re-

quired. If you are uncertain of the effect of the cleaning agent on the carpet fiber or

dye, test on an inconspicuous area first.

STAIN TYPE TREATMENT MATERIAL

Asphalt Volatile solvent/detergent

Beer Liquid detergent, White vinegar

Berry stain Liquid detergent, Ammonia 3-6%, Water

Bleach Liquid detergent, Water

Blood (dried) Warm detergent, Ammonia 3-6%, Water

Blood (wet) Liquid detergent, Water

Butter Volatile solvent

Catsup or Mustard Liquid detergent

Chewing gum Volatile solvent

Chocolate Liquid detergent, Ammonia water

Coffee Detergent, White vinegar, Volatile solvent

Cola drink Liquid detergent

Creme de Menthe (green) Liquid detergent

Egg (raw) Liquid detergent

Food dye Liquid detergent, Water

Furniture dye or polish Paint/Oil/Grease remover, Detergent

Gravy Liquid detergent

Lipstick Paint/Oil/Grease remover

Mascara Paint remover, Volatile solvent, Detergent, Water

Milk Liquid detergent

Orange drink Liquid detergent, Water

Shoe polish Heated iron into clean towel, Volatile solvent

Tea Liquid detergent

Tomato Juice Liquid detergent

Urine Liquid detergent, Water

Vomit Warm detergent, Water, White vinegar

Wine Liquid detergent, Ammonia 3-6%, Water, Vinegar

PREDATOR CXC100

WIRING DIAGRAM

120V & 240V

()

6/13/01

FAN

SW

SW

BLACK

BLUE

WHITE

VAC 2

VAC 1

SW

ORANGE

ORANGE

WHITE

BLACK

GROUND

WHITE

VACUUM

VACUUM

PUMP

CORD 1

*NOTE: Switches

sit upside down in

switch plate.

NSS Enterprises, Inc.

3115 Frenchmens Road, Toledo, Ohio 43607

PHONE (419) 531-3761 • FAX (419) 531-3761

NSS® Enterprises, Inc. European Distribution Centre

Unit II, Pinfold Trading Estate 55 Nottingham Road

STAPLEFORD, NOTTINGHAM NG9 8AD ENGLAND U.K.

PHONE: (44) 0115 939 1568 FAX: (44) 0115 949 0615

PREDATOR CXC100 ORIG. 05-00 9094002 WHW REV. B 08-01