Swiftpoint 501 USB Dongle User Manual Statement
Swiftpoint Limited USB Dongle Statement
Contents
- 1. User Manual (Statement).pdf
- 2. User Manual.pdf
User Manual (Statement).pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2539963 |
| Application ID | lWRlLRl0li88zAFJ7Y2lDQ== |
| Document Description | User Manual (Statement).pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 13.68kB (171002 bits) |
| Date Submitted | 2015-02-24 00:00:00 |
| Date Available | 2015-02-24 00:00:00 |
| Creation Date | 2014-11-07 14:29:20 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2014-12-18 09:58:33 |
| Document Title | User Manual (Statement).pdf |
| Document Creator | Adobe InDesign CC 2014 (Windows) |
Systems Requirements Hardware: Bluetooth 4 or USB Operating Systems: Windows® 7 or higher / Mac OS® 10.4 or higher / iOS 7 or higher / Android 4.4 or higher Ergonomic Information Repetitive use of computers and computer peripherals such as mice and keyboards over prolonged periods may result in physical discomfort and/ or injury to muscles, tendons and nerves. Such outcomes may also be due to an incorrect body posture, an unergonomic work set-up, or poor work habits. If you experience any pain, swelling, stiffness, numbness or other discomfort of these in your hands, wrists, arms, neck, shoulders, back or other parts of your body while using a computer, you should immediately contact a qualified medical professional. Warranty Swiftpoint warrants this product to be free from defects in material and workmanship for a period of two (2) years from the date of purchase. In the event that this product is found to be defective in material and workmanship, Swiftpoint shall, at its sole election, either (1) repair or replace the product, or (2) refund the purchase price, provided that the product is returned to Swiftpoint with a copy of the sales receipt or invoice. Postage charges shall be to the cost of the purchaser, unless applicable law requires otherwise. Refer to the support page at www.swiftpoint.com for product return addresses. This warranty does not cover accidental damage, wear and tear, or use of the product in a manner other than in accordance with the instructions. UNDER NO CIRCUMSTANCES SHALL SWIFTPOINT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT OR INCIDENTAL LOSS OR DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF REVENUES, PROFITS, DATA, OR RECORDS, EVEN IF SWIFTPOINT HAS BEEN MADE AWARE OF THIS POSSIBILITY. This warranty does not affect your statutory rights. Regulatory Information Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-ing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digi-tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the fol-lowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party re-sponsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other an-tenna or transmitter. Radiation Exposure Statement: The product complies with the FCC portable RF exposure limit set forth for an uncon-trolled environment and is safe for intended operation as described in this manual. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux condi-tions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Compliance statement version v2014.1 © 2014 Swiftpoint Limited. All rights reserved. Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an un-controlled environment and are safe for intended operation as described in this manual. Déclaration d’exposition aux radiations: Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. Europe – EU Declaration of Conformity This device complies with the essential requirements and other relevant provisions of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Di-rective 1999/5/EC: • EN 60950-1/A12: 2011 Safety of Information Technology Equipment • EN 62311: 2008 / Article 3(1)(a) and Article 2 2006/95/EC) Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz) (IEC 62311:2007 (Modified)) • EN 300 328 V1.8.1 (2012-06) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band andusing wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive • EN 301 489-1 V1.9.2: 2008 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMag-netic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements • EN 301 489-17 V2.2.1: 2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMag-netic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high per-formance RLAN equipment The technical documentation as required by the Conformity assessment procedure is kept at the following address: 270 St Asaph Street Level 1, Unit 1, Beatbox Christchurch 8011, New Zealand Internet: www.swiftpoint.com Product Disposal Please dispose of this product and packaging in a responsible manner and in ac-cordance with any applicable local or national disposal regulations, including those governing the recovery and re-cycling of waste electrical and electronic equipment (WEEE). 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率 或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改 善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Patent Information Patents pending in the United States and other countries. Features and specifications of the product and this user guide are subject to change without notice. Microsoft and Windows 8 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac OS is either a registered trademark or trademark of Apple Corporation in the United States and/or other countries. All trademarks and registered trademarks are the property of their respective owners.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2014:11:07 14:29:20+13:00 Metadata Date : 2014:12:18 09:58:33+08:00 Modify Date : 2014:12:18 09:58:33+08:00 Creator Tool : Adobe InDesign CC 2014 (Windows) Instance ID : uuid:f034a67e-e0c2-47af-ac23-58128ea9e001 Original Document ID : xmp.did:73a2fdef-1da4-f746-8a73-0842d8e099db Document ID : xmp.id:c31ce6d3-6713-5841-92a1-35a62f510a02 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:bec3534e-9d23-0846-86e6-31030d88c53c Derived From Document ID : xmp.did:66dea3e1-2d9a-184e-9685-57ac3b667ac8 Derived From Original Document ID: xmp.did:73a2fdef-1da4-f746-8a73-0842d8e099db Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Windows) History Changed : / History When : 2014:11:07 14:29:20+13:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2014 (Windows)EXIF Metadata provided by EXIF.tools