TCL Communication B083 CDMA/EVDO/GSM/UMTS/LTE Mobile phone User Manual TempConfidential Mickey6T VZW 5049S PSI US EN 20170606 final

Download:
Mirror Download [FCC.gov]
Document ID	3421480
Application ID	dnnj7wro4S1OGF1b5JLyiQ==
Document Description	TempConfidential_Mickey6T VZW_5049S PSI_US_EN_20170606_final
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.53kB (531667 bits)
Date Submitted	2017-06-11 00:00:00
Date Available	2017-12-09 00:00:00
Creation Date	2017-06-06 09:31:15
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-06-06 09:31:21
Document Title	TempConfidential_Mickey6T VZW_5049S PSI_US_EN_20170606_final
Document Creator	Adobe InDesign CS6 (Windows)

Safety, Precautions, and Troubleshooting
www.sar-tick.com
This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found
on Radio waves section.
When carrying the product or using it while worn on your body, either use an approved accessory such as
a holster or otherwise maintain a distance of 15 mm from the body to ensure compliance with RF exposure
requirements. Note that the product may be transmitting even if you are not making a phone call.
PROTECT YOUR HEARING
To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when
holding your phone near your ear while the loudspeaker is in use.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 1
English - CQF1JD0AZAAA
6/6/2017 9:31:19 AM
Safety and use�������������������������������������������������������������������������������������������������
We recommend that you read this chapter carefully before using your phone. The manufacturer disclaims any liability for damage, which may result as a
consequence of improper use or use contrary to the instructions contained herein.
• TRAFFIC SAFETY:
Given that studies show that using a phone while driving a vehicle constitutes a real risk, even when the hands-free kit is used (car kit, headset...), drivers
are requested to refrain from using their phone when the vehicle is not parked. Check the laws and regulations on the use of wireless phones and their
accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas.
• CONDITIONS OF USE:
You are advised to switch off the phone from time to time to optimize its performance.
Remember to abide by local authority rules of mobile phone use on aircrafts.
If your phone is a unibody device, where the back cover and battery are not removable, dissembling the phone will void your warranty. Disassembling
the phone can cause bodily injury if the battery is punctured.
Always handle your phone with care and keep it in a clean and dust-free place.
Do not allow your phone to be exposed to adverse weather or environmental conditions, such as moisture, humidity, rain, infiltration of liquids, dust, sea
air, etc. The manufacturer’s recommended operating temperature range is -20°C (-4°F) to +60°C (140°F).
At over 55°C (131°F), the legibility of the phone’s display may be impaired, though this is temporary and not serious.
Do not open, dismantle, or attempt to repair your phone yourself.
Do not drop, throw, or bend your phone.
Use only batteries, battery chargers, and accessories which are recommended by TCL Communication Ltd. and its affiliates and are compatible with your
phone model. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries.
Your phone should not be disposed of in a municipal waste.
Please check local regulations for disposal of electronic products.
Remember to make backup copies or keep a written record of all important information stored on your phone.
Some people may suffer epileptic seizures or blackouts when exposed to flashing lights, or when playing video games. These seizures or blackouts may
occur even if a person never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such
occurrences, please consult your doctor before playing video games on your phone or enabling a flashing-lights feature on your phone.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 1
6/6/2017 9:31:19 AM
Parents should monitor their children’s use of video games or other features that incorporate flashing lights on the phones. All persons should discontinue
use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, orientation, or movements.
• PRIVACY:
Please note that you must respect the laws and regulations in force in your jurisdiction or other jurisdiction(s) where you will use your phone regarding
taking photographs and recording sounds with your phone. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/
or to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion
of privacy. It is the user's sole responsibility to ensure that prior authorization has been obtained, if necessary, in order to record private or confidential
conversations or take a photograph of another person; the manufacturer, the seller or vendor of your phone (including the carrier) disclaim any liability
which may result from improper use of the phone.
• BATTERY:
For non-unibody device, where the battery is removable:
- Do not attempt to open the battery due to the risk of toxic fumes and burns;
- Do not puncture, disassemble, or cause a short circuit in a battery;
- Do not burn or dispose of a used battery in the garbage or store it at temperatures above 60°C (140°F).
- Batteries must be disposed of in accordance with locally applicable environmental regulations.
- Only use the battery for the purpose for which it was designed. Never use damaged batteries or those not recommended by TCL Communication
Ltd. and/or its affiliates.
For unibody device, where the battery is not removable:
- Do not attempt to eject, replace, or open battery;
- Do not puncture the back cover of your phone;
- Do not burn or dispose of your phone in the garbage or store it at temperatures above 60°C (140°F).
Phone and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations.
This symbol on your phone, the battery, and the accessories means that these products must be taken to collection points at the end of their
life:
- Municipal waste disposal centers with specific bins for these items of equipment;
- Collection bins at points of sale.
They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 2
6/6/2017 9:31:20 AM
In European Union countries:
These collection points are accessible free of charge.
All products with this sign must be brought to these collection points.
In non-European Union jurisdictions:
Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection
facilities; instead they are to be taken to collection points for them to be recycled.
In the United States you may learn more about CTIA’s Recycling Program at http://www.gowirelessgogreen.org/
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
• CHARGERS:
Home A.C./Travel chargers will operate within the temperature range of: -10°C (14°F) to 50°C (122°F).
The chargers designed for your phone meet the standard for safety of information technology equipment and office equipment use. Due to different
applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this
purpose only.
Characteristics of power supply (depending on the country):
Travel charger: Input: 100-240 V, 50/60 Hz, 200 mA
Output: 5V, 1A
Battery:
Lithium 3000 mAh
Radio waves�����������������������������������������������������������������������������������������������������
THIS PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio-frequency (RF)
energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. These
guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 3
6/6/2017 9:31:20 AM
The exposure standard for phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by public authorities
such as the Federal Communications Commission of the US Government (FCC), is 1.6 W/kg averaged over 1 gram of body tissue. Tests for SAR are
conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands.
This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with
the measurement methods and procedures specified in IEEE1528.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid
after searching on FCC ID: 2ACCJB083 for 5049S.
Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum
value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general,
the closer you are to a wireless base station antenna, the lower the power output of the phone. Before a phone model is available for sale to the public,
compliance with national regulations and standards must be shown.
The highest SAR value for 5049S when tested is 0.55 W/Kg for use at the ear and 1.35 W/Kg for use close to the body.
While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for RF
exposure.
For body-worn operation, the phone meets FCC RF exposure guidelines provided that it is used with a non-metallic accessory with the handset at least
15 mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site: http://www.ctia.org/
The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of
phones. If individuals are concerned, they might choose to limit their own or their children’s RF exposure by limiting the length of calls, or using “handsfree” devices to keep phones away from the head and body. Additional WHO information about electromagnetic fields and public health are available
on the following website: http://www.who.int/peh-emf.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna;
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 4
6/6/2017 9:31:20 AM
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For the receiver devices associated with the operation of a licensed radio service (e.g. FM broadcast), they bear the following statement:
Operation is subject to the following two conditions:
- This device may not cause harmful interference;
- This device must accept any interference received, including interference that may cause undesired operation.
Your phone is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it.
As mobile devices offer a range of functions, they can be used in positions other than against your ear. In such circumstances the device will be compliant
with the guidelines when used with a headset or usb data cable.
If you are using another accessory ensure that whatever product is used is free of any metal and that it positions the phone at least 15 mm away from
the body.
Please note by using the device some of your personal data may be shared with the main device. It is under your own responsibility to
protect your own personal data, not to share with it with any unauthorized devices or third party devices connected to yours. For products
with Wi-Fi features, only connect to trusted Wi-Fi networks. Also when using your product as a hotspot (where available), use network
security. These precautions will help prevent unauthorized access to your device. Your product can store personal information in various
locations including a SIM card, memory card, and built-in memory. Be sure to remove or clear all personal information before you recycle,
return, or give away your product. Choose your apps and updates carefully, and install from trusted sources only. Some apps can impact your
product’s performance and/or have access to private information including account details, call data, location details and network resources.
Note that any data shared with TCL Communication Ltd. is stored in accordance with applicable data protection legislation. For these purposes TCL
Communication Ltd. implements and maintains appropriate technical and organizational measures to protect all personal data, for example against
unauthorized or unlawful processing and accidental loss or destruction of or damage to such personal data whereby the measures shall provide a level
of security that is appropriate having regard to
- The technical possibilities available;
- The costs for implementing the measures;
- The risks involved with the processing of the personal data, and;
- The sensitivity of the personal data processed.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 5
6/6/2017 9:31:20 AM
You can access, review and edit your personal information at any time by logging into your user account, visiting your user profile or by contacting us
directly. Should you require us to edit or delete your personal data, we may ask you to provide us with evidence of your identity before we can act on
your request.
Licenses�������������������������������������������������������������������������������������������������������������
microSD Logo is a trademark.
 he Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TCL Communication Ltd. and
its affiliates is under licence. Other trademarks and trade names are those of their respective owners.
Alcatel 5049S Bluetooth Declaration ID D034867
The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance.
Google, the Google logo, Android, the Android logo, Google SearchTM, Google MapsTM, GmailTM, YouTube, Google Play Store, Google
LatitudeTM, and HangoutsTM are trademarks of Google Inc.
The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons
3.0 Attribution License (the text will show when you touch Google legal in Settings > About phone > Legal information)(1).
You have purchased a product which uses the open source (http://opensource.org/) programs mtd, msdosfs, netfilter/iptables and initrd in object code
and other open source programs licensed under the GNU General Public Licence and Apache Licence.
We will provide you with a complete copy of the corresponding source codes upon request within a period of three years from the distribution of the
product by TCL Communication Ltd.
You may download the source codes from http://sourceforge.net/projects/alcatel/files/. The provision of the source code is free of charge from the
internet.
(1)
May not be available in all countries.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 6
6/6/2017 9:31:21 AM
US Information Concerning the Federal Communications Commission (“FCC”) Requirements for Hearing
Aid Compatibility with Wireless Devices
When wireless devices are used near hearing devices (such as hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise.
Some hearing devices are more immune than others to this interference, and wireless devices also vary in the amount of interference that they generate.
The wireless telephone industry has developed ratings to assist hearing device users in finding wireless devices that may be compatible with their
hearing devices. Not all wireless devices have been rated. Wireless devices that are rated will have the rating displayed on the box together with other
relevant approval markings.
The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device is vulnerable to
interference, you may not be able to use a rated wireless device successfully. Consulting with your hearing health professional and testing the wireless
device with your hearing device is the best way to evaluate it for your personal needs.
This smartphone has been tested and rated for use with hearing aids for some of the wireless technologies that the smartphone uses. However, other
wireless technologies may be used in this smartphone that have not been tested for use with hearing aids. It is important to try the different features of
your smartphone thoroughly and in different locations to determine if you hear any interfering noise when using this smartphone with your hearing aid
or cochlear implant. Consult your wireless service provider about its return and exchange policies, and for information about hearing aid compatibility.
Hearing aid compatibility rating for this smartphone: M4/T4
How the ratings work
M-Ratings: Wireless devices rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than wireless devices
that are not labeled. M4 is the better or higher of the two ratings.
T-Ratings: Wireless devices rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or
“Telephone Switch”) than unrated wireless devices. T4 is the better or higher of the two ratings. (Note that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may
help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from wireless
devices.
For more information about the actions that the FCC has taken with regard to hearing aid compatibility with wireless devices and other steps that the
FCC has taken to ensure that individuals with disabilities have access to telecommunications services, visit www.fcc.gov/cgb/dro.
FCC ID for 5049S: 2ACCJB083
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 7
6/6/2017 9:31:21 AM
General information���������������������������������������������������������������������������������������
• Website: www.alcatelonetouch.com
• Facebook: facebook.com/alcatel
• Twitter: twitter.com/alcatel
• Instagram: instagram.com/alcatelmobile
• Hotline: In the United States, call 855-368-0829 for technical support.
• Manufacturer: TCL Communication Ltd.
• Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong.
• Electronic labeling path: Touch Settings > Regulatory & Safety or press *#07#, you can find more information about labeling(1).
On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by email to ask any questions you may have.
Your phone (5049S) is a transceiver that operates on GSM in quad-band (850/900/1800/1900), CDMA in dual-band (BC0/1), UMTS in quad-band (B1/
B2/4/5), EVDO in dual-band (BC0/1), or LTE in seven-band (B2/4/5/7/12/13/17).
Protection against theft(2)
Your phone is identified by an IMEI (phone serial number) shown on the packaging label and in the phone’s memory. We recommend that you note the
number the first time you use your phone by entering * # 0 6 # and keep it in a safe place. It may be requested by the police or your carrier if your phone
is stolen. This number allows your phone to be blocked preventing a third person from using it, even with a different SIM card.
(1)
(2)
It depends on countries.
Contact your network carrier to check service availability.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 8
6/6/2017 9:31:21 AM
Disclaimer
There may be certain differences between the user manual description and the phone’s operation, depending on the software release of your phone
or specific carrier services.
TCL Communication Ltd. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall
be borne by the carrier exclusively.
Warranty
For Warranty information and support, please visit http://www.alcatelonetouch.us/product-support. You can also call Alcatel [US] Customer Support at
1-855-368-0829 to request a hard copy of the warranty.
Electronic Recycling (Within USA Only):
For more information on Electronic Recycling, please:
• Visit Alcatel Electronic Recycling Program website at http://www.alcatelonetouch.us/electronic-recycling-program, or
• Call Alcatel US Customer Support at 1-855-368-0829.
Battery Recycling (USA & Canada):
Alcatel partners with Call2Recycle® to offer a safe and convenient battery recycling program.
For more information on our Battery Recycling Program, please visit the USA and Canada website at www.alcatelonetouch.us/battery-recycling and
www.alcatelonetouch.ca/battery-recycling
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 9
6/6/2017 9:31:21 AM
Troubleshooting�����������������������������
Before contacting the service center, you are advised to follow the
instructions below:
• To have optimal operation, fully charge the battery.
• To improve the phone’s performance, remove unnecessary files or
apps on your phone.
• To update your system software, use the Updates command in
your phone’s settings.
• To set your phone to factory default, use the Backup and reset in the
phone’s settings, All your phone data will be lost permanently. It is
strongly advised to fully back up your phone before resetting.
My phone can't be switched on
• When the phone can't be switched on, charge for at least 10 minutes
to ensure the minimum battery power needed. Then switch it on again.
My phone has not responded for several minutes
• If your phone doesn’t respond, turn off your phone by pressing and
holding the Power key until it turns off and then restart it again.
• If your phone has a removable battery, remove the battery and re-insert
it, then restart the phone.
My phone turns off by itself
• When your phone turns off by itself, make sure that the Power key is
not accidentally pressed.
• Check the battery charge level.
• Check your phone’s settings for turning off the phone at a certain time.
• If it still doesn't work, Factory reset the phone via the Backup and
reset in the phone’s Settings. Make sure you have backed up your data.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 10
10
My phone can't charge properly
• Make sure that you are using the proper charger that comes with
the phone.
• If your phone has a removable battery, make sure that your battery is
inserted properly and the battery terminal makes a good contact with
the phone. It must be inserted before plugging in the charger.
• Make sure that your battery is not completely discharged; if the battery
power has been discharged for a long time, it may take around 10
minutes to display the battery charging indicator on the screen.
• Make sure that charging is carried out under normal conditions (0°C
(32°F) to 55°C (131°F)).
• When abroad, check that the voltage input is compatible.
• Check that the charging port is secured or it’s not damaged.
My phone can't connect to a network or "No service" is displayed
• Try connecting to the network by moving to another physical location.
• Verify the network coverage with your carrier in your current area.
• Check with your carrier that your SIM card is valid.
• Make sure your phone’s setting is not in airplane mode.
• If you are away from your carrier’s network, you may need to enable
roaming in the phone’s settings to connect to other network. Roaming
charges may apply.
My phone can't connect to the internet
• Make sure that Cellular Data internet service is available in your wireless
• service plan.
• Check your phone's settings. Make sure Cellular Data is enabled or
Wi-Fi connected.
• Make sure that you are in a place with network coverage for cellular
data or Wi-Fi internet connection.
6/6/2017 9:31:21 AM
I can't find my contacts
• Make sure that your SIM card is not broken.
• Make sure that your SIM card is inserted properly.
• Import all contacts stored in SIM card to phone.
The sound quality of the calls is poor
• Adjust the volume during a call by pressing the Volume up/down key.
• Check the network strength. Move to a location with stronger signal
strength.
• Make sure that the receiver, connector or speaker on your phone
is clean.
I can't use the features described in the manual
• Check with your carrier to make sure that your subscription includes
this service.
• Make sure that this feature doesn't require any additional accessory.
When I select a number from my contacts, the number can't be dialed
• Make sure that you have correctly recorded the number in your file.
• Make sure that you have selected the country code when calling an
international number.
I can't add a contact
• Make sure that your SIM card contact list are not full; delete some files
or save the files to the phone.
My callers can't leave messages on my voicemail
• Contact your network carrier to check service availability.
• Set up your voicemail with your carrier, so that your caller can leave
a message.
• Try connecting at a later time or another location.
Invalid SIM card
• Make sure that the SIM card has been correctly inserted (see "Inserting
or removing the SIM card").
• Make sure that the chip on your SIM card is not damaged.
• Make sure that the service of your SIM card matches the network
you’re on.
My phone can't make outgoing calls
• Make sure that you have dialed a valid number and have touched the
call icon on your phone.
• For international calls, check the country and area codes.
• Make sure that your phone is connected to a network, and the network
is not overloaded or unavailable.
• Check your subscription status with your carrier.
• Make sure that you have not barred outgoing calls.
• Make sure that your phone is not in airplane mode.
My phone can't receive incoming calls
• Make sure that your phone is switched on and connected to a network.
• Check for overloaded or unavailable network.
• Check your subscription status with your carrier.
• Make sure that you have not forwarded incoming calls.
• Make sure that you have not barred certain calls.
• Make sure that your phone is not in airplane mode.
The caller’s name/number doesn't appear when a call is received
• Check that you have subscribed Caller ID service with your carrier.
• Your caller may have concealed his name or number.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 11
11
6/6/2017 9:31:21 AM
I can't access my voicemail
• Make sure that your carrier’s voicemail number is correctly entered in
"Voicemail number".
• Try later if the network is busy.
I can't send and receive MMS
• Check your phone storage as it might be full.
• Contact your network carrier to check service availability and MMS
parameters.
• Verify the server center number or your MMS profile with your carrier.
• The server center may be swamped. Try again later.
• Start a new Messaging string. You messaging string may have reached
its limit.
SIM card PIN locked
• Contact your network carrier to obtain the PUK (Personal Unblocking
Key) code.
I can't connect my phone to my computer
• Install Smart Suite.
• Check that your USB driver is installed properly.
• Open the Notification panel to check if the Smart Suite Agent has
been activated.
• Check that you have marked the USB debugging checkbox.
• Check that your computer meets the requirements for Smart Suite
installation.
• Make sure that you’re using the right cable from the box.
I can't download new files
• Make sure that there is sufficient phone storage space for your
download.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 12
• Select the microSD card as the location to store downloaded files.
• Check your subscription status with your carrier.
The phone can't be detected by others via Bluetooth
• Make sure that Bluetooth is turned on and your phone is visible to
other users.
• Make sure that the two phones are within Bluetooth’s detection range.
The battery drains too fast
• Make sure that you follow the complete charge time (minimum 210
minutes).
• After a partial charge, the battery level indicator may not be exact.
• Wait for at least 10 minutes after removing the charger to obtain an
exact indication.
• Adjust the brightness of screen as appropriate.
• Extend the email auto-check interval for as long as possible.
• Update news and weather information on manual demand, or increase
their auto-check interval.
• Exit background-running applications if they are not being used for
extended periods of time.
• Deactivate Bluetooth, Wi-Fi, or GPS when not in use.
The phone becomes warm following prolonged calls, game playing,
internet surfing or running other complex applications
• This heating is a normal consequence of the CPU handling excessive
data. Ending the above actions will make your phone return to normal
temperature.
12
6/6/2017 9:31:21 AM
After Factory data reset is performed, I can't use my phone without
entering Google account credentials
• After reset is performed, you must enter the original Google account
credentials that were used on this phone.
• If you don’t remember your Google account credentials, complete
Google account recovery procedures.
• If you still cannot access your phone, apply to the authorized repair
center, but remember that it will not be regarded as warranty case.
The phone doesn't ring when a call or message arrives
• Make sure that Do Not Disturb mode (go to Settings > Sound > Do not
disturb) is not activated.
• Press the Volume key to adjust volume.
I forget some passwords/codes/keys on phone
• Perform Factory data reset.
• If you still cannot access your phone, apply to the authorized repair
center, but remember that it will not be regarded as warranty case.
Mickey6T VZW_5049S PSI_US_EN_20170605_final.indd 13
Alcatel is a trademark of Alcatel-Lucent
and is used under license by
TCL Communication Ltd.
© Copyright 2017 TCL Communication Ltd.
All rights reserved.
TCL Communication Ltd. reserves
the right to alter material
or technical specification
without prior notice.
All "Signature" ringtones embedded in this phone have
been composed, arranged, and mixed by NU TROPIC (Amar
Kabouche).
Printed in China
13
6/6/2017 9:31:21 AM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Instance ID                     : uuid:3e2ccd74-7b41-43c1-bd7c-9b79e33454eb
Original Document ID            : adobe:docid:indd:da49dc6b-61ad-11e0-8bcb-e7281d93a126
Document ID                     : xmp.id:F5D69EC2574AE711AB67C6B1A9E3616E
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:F4D69EC2574AE711AB67C6B1A9E3616E
Derived From Document ID        : xmp.did:1295A82FD924E7119BEBF6E82787B6A1
Derived From Original Document ID: adobe:docid:indd:da49dc6b-61ad-11e0-8bcb-e7281d93a126
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:06:06 09:31:15+08:00
Create Date                     : 2017:06:06 09:31:15+08:00
Modify Date                     : 2017:06:06 09:31:21+08:00
Metadata Date                   : 2017:06:06 09:31:21+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 14
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools