Tadano RCSFR1 Remote Control Receiver for Crane User Manual USERS MANUAL 1

Download:
Mirror Download [FCC.gov]
Document ID	514004
Application ID	P3r2payoCJbq5JdmhU8n7g==
Document Description	USERS MANUAL 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.71kB (458825 bits)
Date Submitted	2005-02-10 00:00:00
Date Available	2005-02-08 00:00:00
Creation Date	2004-12-16 15:11:06
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2005-01-17 15:23:30
Document Title	USERS MANUAL 1

O307-39(U)-1E
2004
PRINTED IN JAPAN
0412 E
Radio-control System (RCS-FT1)
CAUTION: Read this manual before operating.
this manual
future reference.
for Save
Boom
TruckforSeries
M037910E
Safety Caution
Warning
Incorrect operation and inspection/maintenance of the crane is very dangerous,
causing bodily accidents such as death or serious injury. Before using the crane, carefully
read the operation and maintenance manual of the crane and this manual so that you fully
understand them. Never operate and inspect/maintain the crane until you fully understand
the manuals.
FCC NOTICE
This device complies with Part 15 of the FCC Rules.Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
(1) Do not remove the certificate label.
The purpose of the certificate label on the
radio-control system is to certify that the
device conforms to the Radio Law. Using a
system without the certificate label is illegal.
Do not remove the certificate label.
Transmitter
IC :＊＊＊＊＊-RCSFT1
FCC ID:＊＊＊-RCS-FT1
…………………………
…………………………
…………………………
…………………………
…………………………
………………
Communication unit
IC :＊＊＊＊＊-RCSFR1
FCC ID:＊＊＊-RCS-FR1
…………………………
…………………………
…………………………
…………………………
…………………………
………………
株式会社タダノ
RCS-FR1
製造番号
0200ES2
:＊＊＊＊＊-RCSFR1
IC
FCC ID:＊＊＊-RCS-FR1
…………………………
…………………………
…………………………
…………………………
…………………………
………………
M22649E
(2)
Dismantling/modification
is
prohibited.
Do not dismantle or modify the radio-control
system. Dismantling or modifying the
radio-control
system
is
illegal
and
punishable.
Request a repair at the nearest TADANO
distributor or dealer if the radio-control
system has a problem.
M22318
Safety Caution
A-1
Safety Caution
M037910E
(3) Always keep the transmitter clean.
When the transmitter gets dusty or dirty, wipe
the dust or dirt away with a dry soft cloth.
The attached dust or dirt may give
unfavorable impact on operations of the
motion selection switches or speed control
lever, causing operation failures or
malfunctions of the crane.
M22650E
(4) Handle the transmitter with care.
Do not throw or drop the transmitter, as a
strong shock may cause damage or failure.
When you carry the transmitter with you, do
not drop it. Hang the transmitter onto a
portable hook or use an extended strap to
hang the transmitter from your neck.
M22310
Strap
Portable hook
M22319E
(5) Store the transmitter in a safe place.
Store the radio-control transmitter in a safe
place after replacing it back into the
transmitter-storing bag. Do not leave or store
it in a place exposed to sunlight or rain or a
place with a high temperature or high
humidity.
M22321
Safety Caution
A-2
Safety Caution
M037910E
(6) Remove the batteries of the
radio-control transmitter when not in use
for a long time.
Remove the batteries of the transmitter when
the transmitter is not used for a long time, as
the batteries may leak if not removed.
Battery cover
Dry battery
M22313E
(7) High pressure cleaning is prohibited.
Electric devices, such as control unit and
communication unit, may develop trouble if
water enters inside them. Please do not
clean the electric devices with high pressure.
株式会社タダノ
RCS-FR1
製造番号
0200ES2
IC :＊＊＊＊＊-RCSFR1
FCC ID:＊＊＊-RCS-FR1
…………………………
…………………………
…………………………
…………………………
…………………………
………………
M22655
(8) Pay attention to surrounding
conditions.
It is dangerous if your attention is paid only
to lifted cargos.
Also pay full attention to the conditions of the
main unit of the crane.
Especially, be careful with a vehicle turnover.
M22651
(9) Keep the lifted cargo weight lower
than the rated lifting capacity for empty
chassis.
Be careful with overloading to prevent
accidents.
Safety Caution
A-3
Safety Caution
M037910E
(10) Be careful with radio wave conditions.
Since the radio-control system uses radio
waves, it cannot avoid influences of
electromagnetic interference, radio interference
and exogenous noise. Such influences may
hinder the radio wave transmission, stopping
the crane operation.
Stopping of the crane during the operation may
cause dangers. It is especially dangerous
during a swing operation of the crane. Pay
attention to the following when operating the
radio-control system.
・ It is dangerous to operate the crane under
conditions
with
low
radio
wave
transmission, especially during a swing
operation of the crane since the crane
intermittently moves. Before starting the
operation, confirm that there is no problem
in the crane operation under no load
condition.
・ Too large a distance between the
transmitter and communication unit may
not only hinder the radio wave transmission
but also increase influences of noise.
Normally, operate within the operating
radius of the crane.
・ Obstacles such as wire nettings and metal
doors between the transmitter and
communication unit may hinder the radio
wave transmission.
(Wire netting)
M22652E
・ Use manual control operation under
unfavorable radio transmission conditions.
・ Noise from a vehicle’s air-conditioner used
during the operation may cause an
intermittent crane operation. Refrain from
using an air-conditioner when its noise
influences the radio-control operation.
・ Noise from an approaching motorcycle to
the operation site may cause an
intermittent crane operation. Confirm that
there is no motorcycle approaching during
the operation.
Safety Caution
A-4
M22653
Safety Caution

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:0a8f3849-2460-4193-b48e-e91758e91c1c
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2005:01:17 15:23:30+09:00
Create Date                     : 2004:12:16 15:11:06Z
Metadata Date                   : 2005:01:17 15:23:30+09:00
Document ID                     : uuid:5c2f7f2f-75df-472e-874e-033fbe50004f
Format                          : application/pdf

EXIF Metadata provided by EXIF.tools