Tatung PTAB915D Bench Top PC With 802.11 b/g WLAN User Manual PTAB 915D QSGuide revised

Download:
Mirror Download [FCC.gov]
Document ID	412017
Application ID	SN7k5dvizPuTW7kVE6X0TQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.04kB (150443 bits)
Date Submitted	2004-04-06 00:00:00
Date Available	2004-04-06 00:00:00
Creation Date	2004-04-02 16:24:30
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-04-02 16:24:30
Document Title	Microsoft Word - PTAB-915D QSGuide revised.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	TingLin

Quick Start Guide
Version 2: Online/Node
COVER:
Integrated Marketing Solutions
DS15- Node
Planar Logo/Tag: Display Innovation You Depend On
Quick Start Guide
1. Connect E-net cable
2. Connect power
3. Turn system on
INSIDE:
Quick Start Guide
Step 1: Connecting the System.
Connect the mounting bracket
1. A 75mm VESA KOK Mounting pattern is located on the back of the
Attach left and right adjustable mounting bracket (not
monitorsystem..
included) with four (4) screws provided.
2. If necessary, clean the front surface of the display using clean, compressed air or
by using only a clean, dry, soft cloth.
3. Mount the (product name) to the wall using your hardware. Detailed mechanical
drawings, including mounting hole patterns, may be found at
www.planar.com/support.
4. Securely tighten all mounting hardware.
2. Turning on power
1.
Connect the cord attached to the power adapter to the back-bottom of your
system. Attach the power cord to the power adapter, and then plug the cord into
an active wall outlet, located approximately 1.5 meters from the unit.
2. Attach Ethernet CAT5 cable. (Cable not provided).
3. Push “on” switch located on back of DS15- Node at top of unit.
4. Series of logos will appear on screen, as well as a “set local time” screen.
your finger, set the time.
Using
5. System is set to DHCPIP address 192.168.1.xxx. If DHCP server is on netware
IP address will be assignedThe IP address can be changed via the Administrative
Panel. The Administrative Panel is access by..
Product Specifications
Features
Processor:
ULV Mobile Intel Celeron M 800 processor (400MHz FSB, 90nm
0.13u )
Core Logic Chipset:
North Bridge: Intel GMCH-M 855GM 852GM
South Bridge: Intel ICH4-M
Cache:
512KB L2 Cache
System Memory:
- 256 MB DDR default (soldered on M/B)
BIOS ROM:
512KB flash with boot block or above
Graphics Controller:
integrated on Intel GMCH-M 855GM 852GM
Supports Dual Display Options
LCD Panel:
High brightness = 500 nits
Support XGA 1024 x 768 resolution
LVDS TTL type
Audio:
AC-97 Rev 2.2 Compliant
Integral 3 2W Speakers
Integral Full Duplex Microphone x 1
USB Touch screen:
Capacitance type
Transparency = 88%
Hardness: 7H
Wire type: FPC
Ethernet:
Built In 10/100 Ethernet Port
Wireless:
Built In Intel PRO/Wireless 2200 b/g Wireless LAN
Integral Single Band Antenna
Mass Storage:
20GB HDD with support for larger capacity
2.5”, 9.5mm height, 5V
External exposed Connectors:
USB 2.0 Type A x 1
10/100 Ethernet Port (RJ45) x 1
VGA output (D-sub15)x 1
Serial port x 1
Parallel port x 1
Planar Model
PTAB-915D
N01
PTAB-915D
N02
2 SPK
2 SPK
DC in x 1
Line out Jack x 1
Internal covered connectors:
USB2.0 non standard type x 4 for Expansion
USB2.0 Type A x 1 for touch screen
Expansion:
USB type card reader
USB type printer
USB type Microscan
Optical driver:
Slim & slot in type optical driver
User Indicators:
Power On/Off
HDD Access
AC Power Adapter:
18.5VDC @ 65W
Worldwide EMI and Safety Approvals
Operating System:
Microsoft Embedded Windows XP
Optional
Optional
Optional
Optional
Optional
Optional
V (Optional)
Usage Notice
Warning - To prevent the risk of fire or shock hazards, do not expose this product to rain
or moisture.
Warning – Please do not open or disassemble the product as this may cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s guide to
maximize the life of your unit.
Do:
•
•
•
•
•
•
•
Turn off the product before cleaning.
Use only a dry soft cloth or clean room wiper when cleaning the LCD panel
surface.
Use a soft cloth moistened with mild detergent to clean the display housing.
Use only designated power cord with the designated AC adapter.
Disconnect he power plug from AC outlet if the product is not used for a long
period of time.
Keep away from cold.
Keep away from high temperatures or fire hazards.
Don’t
• Open the computer casing. Any dismantling or adjustments may result in
electric shock.
• Touch the LCD panel surface with sharp or hard objects.
• Use abrasive cleaners, waxes or solvents for your cleaning.
•
•
Pull on the power cord or power adapter, or damage the power cord insulation.
Operate the product under the following conditions:
o Extremely hot cold or humid environment. (See operating specifications)
o Areas susceptible to excessive dust and dirt.
o Near any appliance generating a strong magnetic field.
o In direct sunlight.
o In water
Suggestion:
DS15 is for business not for personal use.
Operating Specifications:
Electrical Rating: AC 100V-240V, DC 18.5V, 3.5A,
Operating Temperature: 5 degrees C – 40 degrees C
Storage Temperature: -20 degrees C – 60 degrees C
Operating Humidity: under 25 degrees C – 50%, 40 degrees C – 85% humidity
Storage Humidity: under 25 degrees C – 50%, 60 degrees C – 85% humidity (no
condensation)
Storage Altitude: 0m – 2900m
Declaration of Conformity (Safety Standards)
Declares that the following product:
DS15- Node
Model: PTAB-915D
Conforms to the following safety standards:
Safety: CB, UL
EMC: FCC, CB
Safety
CB: IEC 60950-1999
UL: UL 60950-1
EMC:
FCC: (USA)
EMC: FCC part 15 subpart B
RF: FCC part 15 subpart C
CE (EU)
EMC: EN 55022:1998+A1:2000, Class B
EN 61000-3-2:1995+A1:1998+A2:1998
EN 61000-3-3:1995
EN 55024:1998+A1:2001
RF:
EN 301 489-17:2002
EN:300 328-2:2001
FCC Warning statement:
15.105 Federal Communications Commission (FCC) Requirements, Part 15
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
Regulatory information / Disclaimers
Installation and use of this device must be in strict accordance with the instructions
included in the user documentation provided with the product. Any changes or
modifications (including the antennas) made to this device that are not expressly
approved by the manufacturer may void the user’s authority to operate the equipment. The
manufacturer is not responsible for any radio or television interference caused by
unauthorized modification of this device, or the substitution of the connecting cables and
equipment other than manufacturer specified. It is the responsibility of the user to correct
any interference caused by such unauthorized modification, substitution or attachment.
Manufacturer and its authorized resellers or distributors will assume no liability for any
damage or violation of government regulations arising from failing to comply with these
guidelines.
Notice
This equipment is designed to be used by mounting in the exhibit area of the mall, it won’t
be used by personally.
IMPORTANT NOTE
In order to maintain compliance with the FCC RF exposure guidelines, this equipment
should be installed and operated with minimum distance 20cm between the radiator and
your body. Use only with supplied antenna. Unauthorized antenna, modification, or
attachments could damage the transmitter and may violate FCC regulations.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled environment. This device and its antenna
must not be co-located or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2004:04:02 16:24:30+08:00
Modify Date                     : 2004:04:02 16:24:30+08:00
Page Count                      : 5
Creation Date                   : 2004:04:02 08:24:30Z
Mod Date                        : 2004:04:02 08:24:30Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : TingLin
Metadata Date                   : 2004:04:02 08:24:30Z
Creator                         : TingLin
Title                           : Microsoft Word - PTAB-915D QSGuide revised.doc

EXIF Metadata provided by EXIF.tools