Technicolor Connected Home USA UIW4010ECH AirTV Player User Manual statements
Technicolor Connected Home USA LLC AirTV Player statements
Contents
- 1. User manual (statements)
- 2. User Manual
User manual (statements)
AirTV Player UIW4010ECH
IMPORTANT PRODUCT INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
10. Only use attachments/accessories specied by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long
periods of time.
12. Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
FCC and IC NOTICES (continued)
RF exposure information: The AirTV Player device complies with FCC RF radiation
exposure limits set forth for general population. This device must be installed to provide
a separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada RF radiation exposure limits set forth for
general population (uncontrolled exposure). This device must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems. High-power
radars are allocated as primary users (i.e. priority users) of the bands 5250–5350 MHz
and 5650–5850 MHz. These radars could cause interference and/or damage to LE-LAN
devices.
Le présent appareil est conforme aux niveaux limites d’exigences d’exposition RF aux
personnes dénies par Industrie Canada. Cet appareil doit être installé an d’orir une
distance de séparation d’au moins 20cm avec l’utilisateur, et ne doit pas être installé à
proximité ou êtreutilisé en conjonction avec une autre antenne ou un autre émetteur.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) il ne
doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le
fonctionnement du dispositif.
Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement
pour une utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux. Les utilisateurs de radars de haute
puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) des bandes de 5
250 à 5 350 MHz et de 5 650 à 5 850 MHz. Ces radars pourraient causer du brouillage et/ou
des dommages aux dispositifs de RL-EL.
FEDERAL COMMUNICATIONS COMMISSION and
INDUSTRY CANADA NOTICES
This device complies with FCC Rules Part 15 and Industry Canada RSS-210.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
CAN ICES-3(B)/NMB-3(B).
CAUTION: The user is cautioned that changes and modications made to the
equipment without the approval of the party responsible for compliance could void
the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by following one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Normal operating conditions: The AirTV Player requires the use of a 12 VDC (+/- 5%),
1500 mA power adapter. Only use a manufacturer-supplied and approved power
adapter. The AirTV Player is designed to work in an indoor environment (0°C to
40°C). 212367
SOFTWARE LICENSES (continued)
The software of this product may contain certain open-source software modules
that are subject to Open Source Software license terms. Such Open Source
Software may change in the future versions of the software.
A list of the Open Source Software used or provided as embedded into the
current software of the product and their corresponding licenses and version
number are available on Technicolor’s website at the following address:
technicolor.com/en/hi/minisites/open-software—or at another address that
Technicolor may provide from time to time.
If and where applicable, depending on the terms of the applicable Open Source
Software licenses, the source code of the Open Source Software is available for
free on Technicolor’s website at the following address:
technicolor.com/en/hi/minisites/open-software.
For avoidance of doubt, Open Source Software is licensed only by the original
owner of the Open Source Software under the terms set forth in the designated
Open Source License.
SOFTWARE LICENSES
Subject to the terms and conditions of this Agreement and your applicable
Promotion Agreement(s), you are licensed to use the software provided in your
receiver(s), as updated by EchoStar Technologies, L.L.C., its licensors and/or its
suppliers without notice at any time and from time to time, solely in executable
code form, solely in conjunction with lawful operation of the receiver(s) that you
purchased or leased, and solely for the purposes permitted under this Agree-
ment and your applicable Promotion Agreement(s). You may not copy, modify or
transfer any software provided in your receiver(s), or any copy of such software,
in whole or in part. You may not reverse-engineer, disassemble, decompile or
translate such software, or otherwise attempt to derive its source code, except
to the extent allowed under any applicable laws. You may not rent, lease, load,
resell for prot or distribute any software provided in your receiver(s), or any
part thereof. Such software is licensed, not sold, to you for use only under
the terms and conditions of this license, and EchoStar Technologies, L.L.C., its
licensors and its suppliers reserve all rights not expressly granted to you. Except
as stated above, this license does not grant to you any intellectual property
rights in the software provided in your receiver(s). Any attempt to transfer any of
the rights, duties or obligations of this license is null and void. In the event that
you breach any term or condition of this license, this license will automatically
terminate.
TRADEMARK and COPYRIGHT NOTICES
The terms HDMI and HDMI High-Denition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in
the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and
the double-D symbol are trademarks of Dolby Laboratories.
Copyright 2016 EchoStar Technologies, L.L.C. All rights reserved. AirTV Player
and the AirTV Player logo are trademarks of EchoStar Technologies, L.L.C.
Other products and companies mentioned are the trademarks of their
respective owners and not of EchoStar Technologies, L.L.C.
Warranty, safety, regulatory, and legal information can be found at:
AirTV.net/Warranty.