Tecom Co BT3062 Bluetooth Headset User Manual

Tecom Co Ltd Bluetooth Headset BT3061

a href="https://usermanual.wiki/Tecom-Co" itemprop="url"> Tecom Co >

Users Manual

Prepare BT3062 Headset Before using BT3062, you need to charge it fully. 1. Plug the AC power adaptor into the charging jack. 2. While charging, the red indicator light is on and remains lit until charging is complete. 3. Charge the unit for approximately 2.5 hours or until the red indicator light goes off. Low Battery Warning Indicators : The headset needs to be recharged when you hear the warning tone through the headset’s speaker at 40 second intervals, or when you see the red indicator light flash. Pairing to a Bluetooth phone With a Bluetooth phone or other device, you must “pair” the headset with the device before you use your headset for the first time. 1. Ensure that the BT3062 headset is off. 2. Press and hold down the ON/OFF button for approximately 6 seconds until the green indicator light and red indicator light flash alternately. 3. Release the ON/OFF button. The BT3062 is now in pairing mode and waiting to communicate with another Bluetooth pairing device for one minute. 4. Follow the operating instructions for your Bluetooth phone to start the pairing process. 5. Your phone’s display should indicate to you that it found the “BT HEADSET” headset and ask if you want to pair it. You should confirm this. 6. The phone’s display should then prompt you for a passkey or PIN. Enter “1111”. 7. After the pairing process has been successful, the BT3062 headset will enter standby mode and the green indicator light will flash every 3 seconds. Turning your headset ON and OFF To turn your BT3062 headset ON : 1. Press and hold the ON/OFF button for at least 3 seconds until the green indicator light emits a very short burst of flashes and the speaker emits the high-pitch beeps. 2. Without delay, release the button. The green indicator light will flash every 3 seconds while the BT3062 headset is turned on. The headset is now in “standby” mode and ready for use. To turn your BT3062 headset OFF : 1. Press and hold the ON/OFF button for at least 3 seconds until the red indicator light emits a very short burst of flashes and the speaker emits the low-pitch beeps. 2. Without delay, release the button. The BT3062 headset is now turned off. There will be no indicator light activity in this mode.
Download:
Mirror Download [FCC.gov]
Document ID485913
Application ID0yJtg0uE0NGxXDYlwqjG2A==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize27.74kB (346735 bits)
Date Submitted2004-11-05 00:00:00
Date Available2004-11-05 00:00:00
Creation Date2004-10-30 20:32:07
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2004-11-04 17:38:34
Document TitleBT3061 User Manual
Document CreatorAcrobat PDFMaker 6.0 for Word
Document Author: KOCH
FCC ID Filing: D6XBT3062

Navigation menu