Telit Mobile Terminals S p A SAT550 TELITAL SAT 550 DUAL MODE PORTABLE MOBILE EARTH ST User Manual DMUT USER GUIDE

Download:
Mirror Download [FCC.gov]
Document ID	60937
Application ID	w/qFaXxpL44rqjpr9Nuh0A==
Document Description	DMUT USER GUIDE
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.35kB (129318 bits)
Date Submitted	1999-09-28 00:00:00
Date Available	2000-04-05 00:00:00
Creation Date	1999-09-16 08:33:17
Producing Software	Acrobat Distiller 3.01 per Windows
Document Lastmod	1999-09-16 08:34:04
Document Title	1vv0300361 TECHNICAL MANUAL Telital GS/GSM DUAL MODE USER TERMINAL
Document Creator	Interleaf, Inc.
Document Author:	Daniele LucÃ

Telital S.p.A.
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
USER GUIDE
Telital DMUT User Guide
Page 1 of 1
Rev. 0
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
Rev. 0
9.1 General
This guide provides all the necessary information for the correct use of the
GS–GSM DMUT.
Figure 1 show the DMUT with a brief description of keys function.
GS/GSM Status Led
Menu
Power
End
Send
GS/GSM mode selection
Phone Book
Clear
SMS
Scroll
Scroll
Figure 1
   
Soft Keys
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
Rev. 0
9.1.1 Display and indications
The display show all status and menu of GS–GSM DMUT during the operations.
Icons and bitmaps tells to the user all situations and operating modes, telephone
numbers, messages, battery charge status, time and other useful informations
(see fig. 2).
GRAPHIC AREA
Figure 2
9.1.1.1 Icons
This icon indicates a programmed alarm.
This icon blinking, indicates an alarm time–out
This icon indicates an Hands–free device (car kit) connected.
This icon indicates the received signal intensity both in GS and GSM
mode. The number of active bar indicates the signal intensity.
This icon displayed in the graphic area indicates an active
conversation.
This icon indicates the SMS function activation and voice mailbox
messages presence.
This icon indicates the battery charge status.
Clock
   
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
Rev. 0
9.1.1.2 Status indications
The status of the dual mode telephone will be given by a led on the front panel and
icons on LCD display graphic area.
LED status ON = GS operating mode;
LED status OFF = GSM operating mode;
Icon on Display for the ”GS Maintenance Required” indication;
Icon on Display for the ”GS Lock” indication.
9.1.2 Battery charger
The DMUT have a rechargeable Lithium ion battery pack and a battery charger.
shows this status and
When the battery charge level becomes low, the icon
empty is blinking, is necessary to connect the battery charger
when the icon
to the DMUT.
The graphic symbol
charge operation.
is shown when the telephone is operating during a battery
The bitmap
DMUT turned off.
. is shown during a battery charge operation with the
9.1.3 Car kit
The car kit option allows to connect the DMUT to the vehicle with battery charge
and hands free functionality.
9.1.4 Operation
9.1.4.1 Minimal functionality
The following operations allows to turn on the DMUT, place a call and then turn
off the DMUT.
Insert your plug–in SIM card into the slot
(POWER) for 1 second to switch on the unit
Press
If PIN is enabled:
PIN>
SOS
If inserted PIN is correct the unit starts network auto search.
In G* mode the following will be displayed:
Searching GW
...
In GSM mode the following will be displayed:
Net Search
** GS/GSM DMUT **
at the end of the search the following will be displayed:
Page 3 of 12
Telital S.p.A.
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Rev. 0
Net Provider
** GS/GSM DMUT **
where the first line indicates the antenna icon (flashing during network auto
search) followed by radio signal intensity (up to 4 bars) and the second line the
name of the network operator, or the gateway ID and then the service provider
name in G* mode.
If inserted PIN is wrong the following will be displayed:
PIN>
Remain X retries
where X on the second line indicates the number of possibilities left to retry correct
PIN entering.
If the wrong PIN is entered for three times the following will be displayed:
PUK>
Remain X retries
Key in * 05 *, the 8 PUK digits provided by the network operator, press
* (new PIN) * (new PIN) and then #.
Warning: If you cannot remember your PUK code or you enter a wrong one for
10 times, you have no other possibility but that of contacting the network operator
who issued your SIM card.
If you inserted the correct PUK appeares a success graphic symbol that indicates
that PUK is valid and then the operative mask.
Now you can place and receive calls.
To switch off the unit: press and release
(POWER).
The following ”Good Bye” graphic screen will be displayed:
Good Bye!
To place a call: dial the number and press
(SEND).
Mistakes in digiting have to be corrected by pressing shortly " 
 " key.
If you keep " 
 " key pressed for longer time, all digits will be cancelled.
Emergency calls can be placed also if the SIM card is not inserted.
(SEND) or any other key if programmed in the menu.
To receive a call: Press
When using the handset: pick up the handset.
To end a call: Press
To adjust listening level: Press
(END).
and
Page 4 of 12
long during conversation.
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
Rev. 0
Mute function: Keep pressed
conversation.
Keypad lock: Keep # pressed for 2 seconds: selected function will be displayed
by lock symbol. Keep press the same key for 2 seconds and press the key "5" to
unlock keypad.
(POWER) for more than 1 second during
Net Provider
9.1.5 Phone book
9.1.5.1 Storing a number
Key in the number to be stored. By pressing "C" the last digit will be cancelled; if
you press "C " for longer time all digits will be cancelled.
Press
The following screen will be displayed:
Enter name
Key in the name: keep the alphanumeric key pressed until the desired letter
appears on the display.
Key " 1 " contains the space and special characters, whereas key " * " switches
between capital and small letters.
Press
(SEND) to store your selection in the first free memory location and
press
(SEND) to confirm.
Press
(END) to exit from phone book without save any number.
9.1.5.2 Recalling a number from phone book
Press XX and #, where XX is the desired memory location number,
or:
Press
and with
or
scroll through all the allocated memories in
alphabetical order or by telephone number order or by memory location order.
The search criteria is defined by pressing the "M" key corresponding to
">>"symbol on display.
The following screen will be displayed during a phone book operations:
Name
Number
mem
Page 5 of 12
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
Rev. 0
By pressing ”C” the last character will be cancelled, and if you keep ”C” pressed
for longer time all characters will be cancelled.
When the desired location appears on the display, press
call.
(SEND) to place the
When recalling a memory location not available on the SIM card the following will
be displayed:
No record
New record?
ADN Memories: Available memory locations in SIM card. Available quantity
depends on the SIM card you have chosen.
FDN Memories: Also contained in the SIM card with same features as ADN
memories. Activation of FDN memories must be performed from the menu and
by entering the PIN2 code which is not always supplied by the network operator.
9.1.6 Function menu
Press "M" key followed by the number key corresponding with the desired menu
number or,
Press "M" key to going to the menu.
Press
Confirm the access on the desired menu by pressing
To exit from menu without save the settings press
To exit from menu and save the settings press
and
or press the "M" key to browse the menus.
(SEND) key.
(END) key.
(SEND) key.
If a ”Proactive” SIM is inserted into a DMUT, a menu item 0 will be displayed.
By selecting this item, access will be given to the SIM Toolkit services supplied by
the network operator.
After 3 minutes of inactivity on the menu operations, the operative condition will
be automatically restored.
The following diagrams show the function menu structure.
Page 6 of 12
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
MENU
SIM Toolkit menu
Own number
Missed calls
Call divert
Clock
On
Off
Parameters
Divert always
Choose forward
All teleservice
Speech
Fax
Data async
DivMissedCalls
Choose forward
If busy
If not reachable
If no reply
All missed calls
Fast divert
Rev. 0
Cancel
Set
All
Cancel
Div missed calls
Choose forward
Cancel
Unconditional Divert
If busy
If not reachable
If no reply
All missed calls
Choose forward
All teleservice
Speech
Fax
Data async
Enter Day

Enter time
Enter Date


Alarm
Enter time
Choose days
Sunday

Monday

Tuesday


Wednesday
Thursday
Friday
Saturday
Everyday
Never
Page 7 of 12
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
Rev. 0
MENU
Settings
Audio
Ringing
Tone
Volume
Warning tones
Service Beep
Display
Vibro-Call
Keypad-Volume
(1 
 4 ) Standard 1 
 4
(5 
 8) Melody 1 
 4
9) User defined
DTMF
Brightness
Bright. length
Off
Low
Medium
High
Incremental
On
Off
Off
Low
High
On
Off
On
OnlyNoServ
Off
On
Off
Off
Short
Long
PersonalMessag
Fixed
Contrast
Rotating
Language
Auto answer
Any key answer
Call waiting
Keyboard lock
English
Italiano
Deutsch
Francais
On
Off
Espanol
Norsk


On
Off
Magyar
On
Polsk
Off
10
cestina
On
11
Portugues
Off
12
Automatic
Page 8 of 12
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
Rev. 0
MENU
Security
Pin control
Change PIN 1
Change PIN 2
PIN request
Phone security
Enter
Security code...
Call barring
GSM networks
Type
On
Off
SIM list
On
Change code
Autoblock
Off
Change code
Restore default
Incoming
Cancel
Fixed dialling
Disabled
Clear SIM list
Outgoing
Outgoing calls
International
Only to home
Choose forward
Choose forward
Choose forward
Incoming calls
Call if abroad
Incoming calls
Call if abroad
Outgoing calls
International
Only to home
Change code
Enabled
On
Off
Search network
Auto selection
Network list
Home network
On
Off
Preferred nets 1 
 16
Page 9 of 12
Available nets 1 
 16
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
Rev. 0
MENU
Call control
Minute beep
Call duration
Charge rate
Trans. own no.
CUG
Information
NITZ
IMEI
Software
SIM info
Total life
On
Off
Last call
Incoming home
Incoming roam
Outgoing home
Outgoing roam
Total time
Clear timers
Last call
All calls cost
Cost control
Reset
Units account
For all calls
Transmit
Don't transmit
CUG Index
Suppr. CUG
Suppr. OA
Enabled
Disabled
Page 10 of 12
ON
OFF
ON
OFF
Restrict. control
Transmit
Don't transmi
Net Default
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
Rev. 0
9.1.6.1 SMS menu
Pressing the
is available the SMS (Short Message Service) menu.
This menu allows to send and receive short text messages (SMS), to receive messages from the network operator and other supported services.
The following diagram show the SMS menu structure.
SMS
MENU
Call mailbox
Messages
Choose forward
Write new
Received
Written
Parameters
Mailbox number
SMS center n.
SMS center
User defined
Phone param.
Autodelete
On
Off
Reply path
Status report
Information
Message:
nndd/mm/yy hh:mm
From:
message:
Select param.
Activate
Deactivate
Name
SMS-Center no.
Validity
Destination
Protocol Id
Set default
On
Off
Active only if DMUT is operating in GSM mode.
Broadcast
Message
Activation
On
Off
Auto display
Languages
List
English
Italiano
Deutsch
Francais
District
Espanol
Flashes
Norsk
Weather


Index
Magyar
5 - 10 Empty
Page 11 of 12
Polsk
10
cestina
11
Portugues
12
Automatic
TECHNICAL MANUAL
GS/GSM
DUAL MODE USER TERMINAL
Telital S.p.A.
Rev. 0
9.1.6.2 Globalstar Menu
key is available the Globalstar menu.
Pressing the
This menu partially active only in idle mode, allows to manually select the way of
operating at power on of the DMUT.
The following diagram show the MS menu structure.
MODE
SELECTION
MENU
Mode
GS only
GSM only
GS preferred
GSM preferred
Error display
Active only if DMUT is operating in IDLE mode.
Active only if DMUT is operating in GS mode.
Positioning
GS service
Local Time
Test
Position
Last Pos.
Search network
Auto selection
On
Off
On
Off
Network list
Start test call
End test call
Markov stats
Satellite Info
Page 12 of 12
MARKOV 9600
MARKOV 4800
LOOPBACK 9600
LOOPBACK 4800
Enable
Disable

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 1999:09:16 08:34:04-07:00
Create Date                     : 1999:09:16 08:33:17-07:00
Title                           : 1vv0300361 TECHNICAL MANUAL Telital GS/GSM DUAL MODE USER TERMINAL
Author                          : Daniele Lucà
Creator                         : Interleaf, Inc.
Producer                        : Acrobat Distiller 3.01 per Windows
Page Count                      : 13

EXIF Metadata provided by EXIF.tools