TomTom REMOTE Remote Control User Manual
TomTom International BV Remote Control 3 7045 TT QSG EUR def indd
a href="https://usermanual.wiki/TomTom" itemprop="url">
TomTom >
Contents
- 1. User Manual
- 2. UserMan_Logbook
- 3. UserMan_Working Time
UserMan_Logbook
![Remote LINKLogbookUser GuideConnected NavigationPart. no. 6KG0.002.04](https://usermanual.wiki/TomTom/REMOTE.UserMan-Logbook/User-Guide-1248992-Page-1.png)
![Preparing your Remote LINK3ENPre-par-ing your Re-mote LINKInserting the batteries1. Hold the sides of the Remote LINK and press the latch on the back of the device to open the battery compartment.2. Insert the batteries (2 x AAA/LR3) in the Remote LINK. Make sure you insert the batteries in the correct way, as shown inside the battery compartment.3. Replace the battery cover.Establishing a paired connectionThe following instructions only apply if your Remote LINK has not been connected to a TomTom LINK 300/310. Press any key to turn on your Remote LINK and see “Understanding your Remote LINK” to check the status of the device. If the device is not paired with a LINK 300/310, then do the following.1. Make sure the LINK 300/310 is properly installed in the vehicle.2. Turn on the ignition.3. Make sure there are no other vehicles installed with a LINK 300/310 located within a distance of 30 metres.4. Press any key on your Remote LINK to switch it on. If the LEDs on all three buttons are flashing, then the device is not paired and you need to continue with the next step. 5. Press any two buttons at the same time until you hear a sound.Borna_Logbook.book Page 3 Thursday, January 21, 2010 9:53 AM](https://usermanual.wiki/TomTom/REMOTE.UserMan-Logbook/User-Guide-1248992-Page-2.png)