Topcon TIWIBLE TiWi-BLE User Manual

Topcon Corporation TiWi-BLE Topcon Rev2

a href="https://usermanual.wiki/Topcon" itemprop="url"> Topcon >

Users Manual Rev 2

   Integrated Transceiver Modules for WLAN 802.11 b/g/n   FEATURES IEEE 802.11b,g,n,d,e,i compliant   Typical WLAN Transmit Power: o  20.0dBm, 11 Mbps,CCK (b) o  14.5dBm, 54 Mbps,OFDM (g) o  12.5dBm, 65 Mbps,OFDM (n)   Typical WLAN Sensitivity: o  -89dBm, 8% PER, 11 Mbps o  -76dBm, 10% PER, 54 Mbps o  -73dBm, 10% PER, 65 Mbps   Miniature footprint: 18 mm x 13 mm   Low height profile: 1.9 mm   U.FL connector for external antenna   Terminal for PCB/Chip antenna feeds   Integrated band-pass filter   Compact design based on Texas Instruments WL1271L Transceiver   Seamless integration with TI OMAP™ application processors   SDIO Host data path interfaces   Bluetooth Advanced Audio Interfaces   Low power operation mode   RoHS compliant APPLICATIONS  Security   HVAC Control, Smart Energy   Sensor Networks   Medical   DESCRIPTION The TiWi-BLE module is a high performance 2.4 GHz IEEE 802.11 b/g/n radio in a cost effective, pre-certified footprint. The module realizes the necessary PHY/MAC layers to support WLAN applications in conjunction with a host processor over a SDIO interface.
  ELECTRICAL SPECIFICATIONS The majority of these characteristics are based on controlling and conditioning the tests using the TiWi-BLE control software application.  Other control conditions may require these values to be re-characterized by the customer. Absolute Maximum Ratings Parameter  Min  Max  Unit Power supply voltage (VBAT)(4)(5) -0.5  +5.5 V Digital supply voltage (VIO) -0.5  2.1  V Voltage on any GPIO  -0.5  VIO + 0.5  V Voltage on any Analog Pins(3)  -0.5  2.1  V RF input power, antenna port    +10  dBm Operating temperature(6)  -40  +85  ºC Storage temperature  -55  +125  ºC  1.  Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device and are not covered by the warranty.  These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied.  Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2.  All parameters are measured as follows unless stated otherwise: VDD_IN=1.8V, VDDIO_1.8V=1.8V, VDD_LDO_CLASS1P5=3.6V 3.  Analog pins: XTALP, XTALM, RFIOBT, DRPWRXBM, DRPWRXBP, DRPWTXB, and also FMRFINP, FMRFINM, FMRFINM, FMAUDLIN, FMAUDRIN, FMAUDLOUT, FMAUDROUT 4.  The following signals are from the VBAT group, PMS_VBAT and VDD_LDO_CLASS1P5 (if BT class 1.5 direct VBAT is used). 5.  Maximum allowed depends on accumulated time at that voltage; 4.8V for 7 years lifetime, 5.5V for 6 hours cumulative. 6.  The device can be reliably operated for 5,000 active-WLAN cumulative hours at TA of 85oC. Table 1 Absolute Maximum Ratings  Recommended Operating Conditions Parameter  Min  Typ  Max  Unit VBAT  3.0  3.6  4.8  V VIO  1.62  1.8  1.92  V VIH   0.65 x VIO  -  VIO  V VIL  0  -  0.35 x VIO  V VOH @ 4, 8 mA  VIO - 0.45  -  VIO  V VOL  @ 4, 8 mA  0  -  0.45  V Ambient temperature range  -40  25  85  ºC Table 2 Recommended Operating Conditions
Download:
Mirror Download [FCC.gov]
Document ID2835586
Application IDY0c+QtObXLnVwOG8erWOIQ==
Document DescriptionUsers Manual Rev 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize31.06kB (388240 bits)
Date Submitted2015-12-09 00:00:00
Date Available2015-12-09 00:00:00
Creation Date2015-12-08 09:51:44
Producing SoftwareAcrobat Distiller 10.0.0 (Windows)
Document Lastmod2015-12-08 09:51:44
Document TitleMicrosoft Word - Topcon User Manual Rev2
Document CreatorPScript5.dll Version 5.2.2
Document Author: ahauck
FCC ID Filing: H5P-TIWIBLE

Navigation menu