Toro Procore 648 09200 Specifications

: Toro Toro-Procore-648-09200-Specifications-139046 toro-procore-648-09200-specifications-139046 toro pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

ProCore® 648
The most productive walk greens aerator with a 48" swath. Innovative wheels-behind design eliminates crushed
cores and hole damage.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

117

Pro­­Core® 648 Specifications*
PROCORE 648, MODEL 09200
ENGINE
FUEL CAPACITY

Kohler®, 2-cylinder, air-cooled, 23 hp (17.2 kW) gross, 19 hp (14.2 kW) net @ 3000 rpm, 41 cu-in. (674 cc) displacement. Dry, large capacity, replaceable element air
filter. External spin-on oil filter, 2-quart (1.9-liter).
7.5-gallon (28.4-liter), gasoline.

ELECTRICAL

12-volt, 15 amp regulated charging alternator/generator. BCI Group No.: U1 battery, 300 cold cranking amp @ 0°F. Micro-processor logic control.

DRIVETRAIN

3WD, Series-Parallel hydrostatic, closed loop. Variable displacement piston type pump. High-torque, low-speed wheel motor drive.

HYDRAULIC SYSTEM
CONSTRUCTION
TIRES
BRAKES
GROUND SPEED
INSTRUMENTATION
CONTROLS

Remote spin-on filter. 3.0- gallon (13.2-liter), Mobilfluid 424 (std.) or Mobil EAL biodegradable (opt.).
Traction unit: welded steel frame. Coring head: welded steel frame with cast crank and arm assembly.
20 x 10-10, 2-ply rated, smooth tread, tubeless, inflated to 12 psi, de-mountable rims.
Dynamic braking through hydrostatic transmission service brake. Hand actuated parking brake.
Transport: 			
Forward: 	
0-3.5 mph (0-6.4 km/h), variable	
Detent 1:	
Reverse: 	
0-2.0 mph (0-3.2 km/h), variable	
Detent 2:	
Aerating:	
.77-1.51 mph (1.23-2.42 km/h), variable	
Detent 3:	
		
Detent 4:	
Hourmeter, tachometer.
Hand controlled bail on handle, coring head lifts and de-clutches if control bail is released. Parking brake and transaxle shift on handle. Coring head raise/lower
switch on handle console. Side console with ignition, aeration spacing, manual ground follow and system reset. Aeration depth adjustment on coring head. Throttle
and choke on engine.

INTERLOCKS

Clutch latch, traction neutral, coring head raise/lower.

DIMENSIONS

	
Length	
Width	
	 104.5" (265.4 cm)	
50.12" (127.3 cm)	
			
			

CERTIFICATION
WARRANTY

Aerating:
1.5" (3.8 cm) spacing (2 x 1.5" pattern)
2.0" (5.1 cm) spacing (2 x 2.0" pattern)
2.5" (6.4 cm) spacing (2 x 2.5" pattern)
3.0" (7.6 cm) spacing (2 x 3.0" pattern)

Height	
Head Raised 45" (114.3 cm)	
Head Lowered 36.5" (92.7 cm)
Top of Handle 41.0" (104.1 cm)

Wheelbase	
44.5" (113 cm)	

Track Width	
38.3" (97.3 cm)	

Weight (dry)	
1,590 lbs. (722 kg)	

Ground Clearance
4.75" (12.1 cm)

ANSI B71.4-1999. CE & EU machinery directives.
Two-year or 500 hour limited warranty. Refer to the Operator’s Manual for further details.

TINE HEADS

TINES

Model	
Description	
09739	
Needle Tine	
09736	
Mini-Tine (2 rows of 5)	
09737	
Mini-Tine (1 row of 6)	
09794	
3 Tine 3/4"	
09796	
4 Tine 3/4"	
09797	
3 Tine 7/8"	
09711	QuickChangeTM 3-Tine	
09719	QuickChangeTM 4-Tine	

Lateral Spacing	
1.6" (2.8 cm)	
1.6" (2.8 cm)	
1.3" (3.3 cm)	
2.6" (6.8 cm)	
2" (5.1 cm)	
2.6" (6.8 cm)	
2.6" (6.8 cm)	
2" (5.1 cm)	

Mount Diameter
N/A
3/8"
3/8"
3/4"
3/4"
7/8"
3/4" or 7/8"
3/4" or 7/8"

ACCESSORIES
Model	Description
09220	
Windrower Kit
Tire Scrapers
09225	
Rear Roller Kit
09234	
99-6166-01	
Weight Kit
114-0590-01	QuickChangeTM Tool

TINES
	
	

Over 100 Titan Tines in multiple varieties available from Toro
See the Toro Titan Tines Catalog or visit www.toro.com/titantines

*Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

118

The ProCore 648 is manufactured
in Tomah, WI ISO 9002 Certified Plant.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2015:03:10 09:39:38-05:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2015:03:10 09:39:52-05:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:03:10 09:39:52-05:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Format                          : application/pdf
Document ID                     : uuid:460b9a11-f863-d24b-8a90-b6be916967c7
Instance ID                     : uuid:c3103da7-53e1-5245-aaa2-dd71087ecb21
Producer                        : Adobe PDF Library 11.0
Page Count                      : 2

EXIF Metadata provided by EXIF.tools