Toro Procore 648 09200 Specifications

: Toro Toro-Procore-648-09200-Specifications-139046 toro-procore-648-09200-specifications-139046 toro pdf

Open the PDF directly: View PDF .
Page Count: 2

117

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

ProCore® 648

The most productive walk greens aerator with a 48" swath. Innovative wheels-behind design eliminates crushed

cores and hole damage.

118

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

Pro Core® 648 Specifications*

PROCORE 648, MODEL 09200

ENGINE

Kohler®, 2-cylinder, air-cooled, 23 hp (17.2 kW) gross, 19 hp (14.2 kW) net @ 3000 rpm, 41 cu-in. (674 cc) displacement. Dry, large capacity, replaceable element air

filter. External spin-on oil filter, 2-quart (1.9-liter).

FUEL CAPACITY

7.5-gallon (28.4-liter), gasoline.

ELECTRICAL

12-volt, 15 amp regulated charging alternator/generator. BCI Group No.: U1 battery, 300 cold cranking amp @ 0°F. Micro-processor logic control.

DRIVETRAIN

3WD, Series-Parallel hydrostatic, closed loop. Variable displacement piston type pump. High-torque, low-speed wheel motor drive.

HYDRAULIC SYSTEM

Remote spin-on filter. 3.0- gallon (13.2-liter), Mobilfluid 424 (std.) or Mobil EAL biodegradable (opt.).

CONSTRUCTION

Traction unit: welded steel frame. Coring head: welded steel frame with cast crank and arm assembly.

TIRES

20 x 10-10, 2-ply rated, smooth tread, tubeless, inflated to 12 psi, de-mountable rims.

BRAKES

Dynamic braking through hydrostatic transmission service brake. Hand actuated parking brake.

GROUND SPEED

Transport: Aerating:

Forward: 0-3.5 mph (0-6.4 km/h), variable Detent 1: 1.5" (3.8 cm) spacing (2 x 1.5" pattern)

Reverse: 0-2.0 mph (0-3.2 km/h), variable Detent 2: 2.0" (5.1 cm) spacing (2 x 2.0" pattern)

Aerating: .77-1.51 mph (1.23-2.42 km/h), variable Detent 3: 2.5" (6.4 cm) spacing (2 x 2.5" pattern)

Detent 4: 3.0" (7.6 cm) spacing (2 x 3.0" pattern)

INSTRUMENTATION

Hourmeter, tachometer.

CONTROLS

Hand controlled bail on handle, coring head lifts and de-clutches if control bail is released. Parking brake and transaxle shift on handle. Coring head raise/lower

switch on handle console. Side console with ignition, aeration spacing, manual ground follow and system reset. Aeration depth adjustment on coring head. Throttle

and choke on engine.

INTERLOCKS

Clutch latch, traction neutral, coring head raise/lower.

DIMENSIONS

Length Width Height Wheelbase Track Width Weight (dry) Ground Clearance

104.5" (265.4 cm) 50.12" (127.3 cm) Head Raised 45" (114.3 cm) 44.5" (113 cm) 38.3" (97.3 cm) 1,590 lbs. (722 kg) 4.75" (12.1 cm)

Head Lowered 36.5" (92.7 cm)

Top of Handle 41.0" (104.1 cm)

CERTIFICATION

ANSI B71.4-1999. CE & EU machinery directives.

WARRANTY

Two-year or 500 hour limited warranty. Refer to the Operator’s Manual for further details.

TINE HEADS

TINES

Model Description Lateral Spacing Mount Diameter

09739 Needle Tine 1.6" (2.8 cm) N/A

09736 Mini-Tine (2 rows of 5) 1.6" (2.8 cm) 3/8"

09737 Mini-Tine (1 row of 6) 1.3" (3.3 cm) 3/8"

09794 3 Tine 3/4" 2.6" (6.8 cm) 3/4"

09796 4 Tine 3/4" 2" (5.1 cm) 3/4"

09797 3 Tine 7/8" 2.6" (6.8 cm) 7/8"

09711 QuickChangeTM 3-Tine 2.6" (6.8 cm) 3/4" or 7/8"

09719 QuickChangeTM 4-Tine 2" (5.1 cm) 3/4" or 7/8"

ACCESSORIES

Model Description

09220 Windrower Kit

09225 Tire Scrapers

09234 Rear Roller Kit

99-6166-01 Weight Kit

114-0590-01 QuickChangeTM Tool

TINES

Over 100 Titan Tines in multiple varieties available from Toro

See the Toro Titan Tines Catalog or visit www.toro.com/titantines

The ProCore 648 is manufactured

in Tomah, WI ISO 9002 Certified Plant.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.