TL WA850RE(USA) V2 QIG

Tl-Wa850Re(Us) V2 Qig TL-WA850RE(US)_V2_QIG TL-WA850RE(US)_V2_QIG doc down res static.tp-link.com 3:

Tl-Wa850Re(Usa) V2 Qig TL-WA850RE(USA)_V2_QIG TL-WA850RE(USA)_V2_QIG doc down res static.tp-link.com 3:

Tl-Wa850Re(Us) V2 Qig TL-WA850RE(US)_V2_QIG TL-WA850RE(US)_V2_QIG doc down_res static.tp-link.com 3:

2016-08-01

: Tp-Link Tl-Wa850Re(Usa) V2 Qig TL-WA850RE(USA)_V2_QIG doc down_res

Open the PDF directly: View PDF PDF.
Page Count: 2

RE
Wireless
Power
Ethernet
7106506183 REV2.2.0
Wireless
On/Off: The extender’s wireless
function is on or off.
Power
On/Off: The extender is on or off.
Ethernet
On/Off: The Ethernet port is
connected or not connected.
Indicates the Wi-Fi connection
between the extender and the
router. More lit LEDs indicate a
better signal strength.
(Signal Strength)
RE
On/Off: The extender is
connected or not connected to
the router.
Blinking: WPS connection is in
process.
Quick
Installation
Guide
Using WPS (Wi-Fi Protected Setup)
Option ONE
LED Explanations
TL-WA850RE
Applicable Model:
Wait until the LEDs are lit. Make sure the
extender is in a location with 3 or more
LEDs lit. If not, relocate it closer to the
router to achieve better signal quality.
Plug in the extender about halfway between
your router and the Wi-Fi dead zone. The
location you choose must be within the
range of your host network.
Relocate
1
2
3LEDs lit on
1
2
3
4
5
Slow/Unstable
Good
Best
Host Network
Host Router
Clients
Extended Network
The extender adds _EXT to the end of the host network’s SSID and shares
the same Wi-Fi password.
Enjoy! MyHome MyHome_EXT
Option TWO: Your router doesn’t support WPS or you are not sure.
WPS Option ONE: Your router supports Wi-Fi Protected Setup (WPS). The WPS button of a router might look like one of these: .
Plug the extender into an eletrical outlet
near your router.
The RE LED should
turn solid on.
If not, please use Option
TWO. RE
1. Some ISP gateways disable the WPS function by default, if the WPS method fails, please use Option TWO.
2. For more information about using WPS on your router, please refer to the router manufacturer's user guide.
Press the WPS button on your router.
Power on Connect
1Press the button on your extender
within 2 minutes.
2
Wait until the
Wireless LED turns
solid on.
Wireless
Power
Tether app provides a simple, intuitive way to access and manage your extender with your iOS or
Android devices.
Block unwelcome devices
Turn on/off LEDs
on the phone
Modify current settingsSetup the extender
TP-LINK Tether App
Tether
1. Download the Tether app from the Apple App Store or Google Play Store.
2. Ensure your device is wirelessly connected to the extender or to the host router.
3. Launch the app and start managing your extended network.
How to
begin?
The extender can be used as a wireless adapter to connect any Ethernet-only device such
as a Blu-ray player, game console, DVR, or smart TV to your Wi-Fi network.
First, connect the extender to your router using Option ONE or Option TWO, then connect
your Ethernet-only device to the extender via an Ethernet cable.
Entertainment Adapter
Ethernet Connection
Router
Smart TV Game Console Desktop
Note: AP mode of the extender is not supported by the Tether.
Scan to download
Using a Web Browser
Option TWO
Plug the extender into an eletrical outlet
near your router.
Power on Connect to the extender
1. Unplug the Ethernet cable from your computer (if any).
2. Click the Wi-Fi icon on the taskbar and connect to the
extender’s network TP-LINK_WA850RE.
1. Unplug the Ethernet cable from your Mac (if any).
2. Click the Wi-Fi icon in the top right corner of the
screen and connect to the extender’s network
TP-LINK_WA850RE.
For Windows Users For Mac OS X Users
Wi-Fi: On
Turn Wi-Fi Off
MyHome
Join Other Network...
Create Network...
Open Network Preferences...
TP-LINK_WA850RE
Relocate Enjoy!
Unless you have customized the extended network name during the configuration, the extender
adds _EXT to the end of the host network’s SSID and shares the same Wi-Fi password.
Flip this piece of paper, and refer to
Step 3 of Option ONE.
A1: You may have entered an incorrect Wi-Fi password of your host network during the
configuration. Log into the extender’s web management page to check the password
and try again.
A2: The extender may be out-of-range. Please move it closer to the router.
A3: Reset the extender and go through the configuration again.
Q3. Why doesn’t the RE LED light up after I completed Option TWO?
A1: Make sure your computer is connected to the extended network.
A2: Make sure your computer is set to obtain an IP address and DNS server address
automatically.
A3: Use the IP address to access the extender. The default IP is 192.168.0.254. If the extender
has connected to the router, you should go to your router’s DHCP client list to obtain the
extender’s current IP address.
A4: Reset the extender and connect to its wireless network. Enter http://tplinkrepeater.net or
192.168.0.254 in the web browser and press Enter.
Q1. Why can't I access the login page after entering http://tplinkrepeater.net in the
browser?
A: With the extender powered on, use a pin to press the RESET button until all the LEDs
turn on momentarily. Then release the button.
Q2. How do I reset the extender?
A: If your have enabled those features of your host router, you may need to disable them
first, and then follow Option ONE or Option TWO to complete the configuration.
For details, please visit www.tp-link.com and refer to the FAQ section in the extender’s
User Guide.
Q4. I enabled a wireless MAC filter, wireless access control, or access control list
(ACL) on my router, what should I do before configuring and using the extender?
Create an account for secure management purpose,
and then click Confirm.
Verify your wireless settings and click Save.
And then check the RE LED.
Either copy the host SSID or customize it for
the 2.4GHz extended network, and click Next.
Select your router’s 2.4GHz Network and enter its
wireless password (NOT the account password
you just created for management). Then click Next.
Host 2.4GHz password:
Please select 2.4GHz host network.
2.4GHz Host Network
Wireless Settings
Summary
Other...Exit Rescan
Next
ID
1
3
SSID
MyHome
TP-LINK_1
MAC Address
00:0A:EB:13:09:19
C0:4A:00:D1:0F:22
Signal Security
12345678
Create a new username and password.
New Username:
New Password:
Confirm Password:
Low Middle High
Confirm
Username
Launch a web browser and type http://tplinkrepeater.net in the
address bar. Enter admin (all lowercase) for both Username and
Password, and then click Login.
If the login
window does not
pop up, please refer
to the FAQ > Q1.
http://tplinkrepeater.net
admin
Login
admin
MyHome_EXT
Extended 2.4GHz SSID:
Hide SSID broadcast
Note: The extended 2.4GHz password is the same as your Host password.
2.4GHz Host Network
Wireless Settings
Summary
Back Next
Copy Host SSID
Configure
RE
The RE LED should
turn on and stay solid.
If not, please refer to
FAQ > Q3.
1 2
4 53
©2016 TP-LINK
Wait until the
Wireless LED turns
solid on.
Wireless
Power
Connections are available
Wireless Network Connection
Connect automatically Connect
TP-LINK_WA850RE
MyHome

Navigation menu