Trango Systems M2400S 2.4 GHz Wireless Broadband System User Manual

Trango Systems Inc 2.4 GHz Wireless Broadband System M2400S ProInstallGuide DRAFT

a href="https://usermanual.wiki/Trango-Systems" itemprop="url"> Trango Systems >

Contents

installation guide

        !"#$%& 
Preface Trango Broadband Wireless — Professional Installation Guide Rev A Page ii Preface This manual covers configuration and installation of the optional external antennas for use with the M2400S Access Point M2400S-AP and Subscriber Unit M2400S-SU. Since this device requires manual power limit settings for use with the higher gain antennas, it is classified by the FCC as a professional install device. To be in compliance with FCC requirements, the radio must be installed with one of several approved antennas listed in this document. The M2400S-SU subscriber unit (SU) works in conjunction with the M2400S-AP access point. Please see the M2400S User Manual for general information on overall system implementation, configuration, and management of the access point. The M2400S User Manual also covers many important aspects of subscriber unit configuration and management. FCC Information This device complies with Part 15 of FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in any particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of more of the following measures: 1) Reorient the antenna; 2) Increase the separation between the affected equipment and the unit; 3) Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to; 4) Consult the dealer and/or experienced radio/TV technician for help. FCC ID: NCYM2400S Canada: TBD IMPORTANT NOTE: Intentional or unintentional changes or modifications must not be made unless under the express consent of the party responsible for compliance. Any such modifications could void the user’s authority to operate the equipment and will void the manufacturer’s warranty. To comply with FCC RF exposure requirements, the following antenna installation and device operating configurations must be satisfied. The antenna for this unit must be fixed and mounted on outdoor permanent structures with a separation distance of at least two meters from all persons. Furthermore, it must not be co-located or operating in conjunction with any other antenna or transmitter. Warranty Information Radios from Trango Broadband Wireless are warranted from one year from date of purchase. Please see www.trangobroadband.com for complete description of warranty coverage and limitations. Firmware Notifications To receive email notifications regarding firmware upgrades and product announcements, register at http://www.trangobroadband.com/mailinglist/mailingListAdd.aspx
Download:
Mirror Download [FCC.gov]
Document ID451229
Application IDBEPivJjJ8P21acX8ZvF/BQ==
Document Descriptioninstallation guide
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize11.73kB (146599 bits)
Date Submitted2004-07-19 00:00:00
Date Available2004-07-19 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareGNU Ghostscript 7.06
Document Lastmod0000-00-00 00:00:00
Document TitleMicrosoft Word - M2400S_ProInstallGuide_DRAFT.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Drew
FCC ID Filing: NCYM2400S

Navigation menu