TransCore 05985 Location Monitoring Services Transmitter User Manual

TransCore Location Monitoring Services Transmitter

a href="https://usermanual.wiki/TransCore" itemprop="url"> TransCore >

User Manual

Trusted Transportation SolutionsPocketPass™Installation Instructions16-0046-001 Rev D 10/16PocketPass is designed for mounting to a vehicle's interior windshield surface using 3M™ Dual Lock™ strips. This mounting method provides for easy mounting and removal when portability is needed.General Instructions and GuidelinesProper Handling Prior to InstallationIMPORTANT: Prior to installation by the end user, PocketPass should be stored in the shielded bags and/or packaging provided by TransCore. Failure to properly store tags will result in shortened battery life. Metallized WindshieldSome vehicle windshields contain a metallic treatment that could prevent an interior windshield-mounted device from working correctly. If you have a vehicle with a metalized windshield, contact your local customer service center for more information. If your vehicle’s metalized windshield has a metal-free zone, it is typically located near the rear view mirror.Windshield BandSome windshields have a solid or dotted black frit band around the edges of the windshield. The frit band protects the windshield mounting materials from the sun and ultra-violet rays. The PocketPass may be placed behind this band if necessary without aecting tag performance.Figure 1 – Windshield frit band
Page 2Installation InstructionsPocketPass ActivationActivating the PocketPass1. Remove PocketPass from the shielded bag2. Locate the battery door and find the battery protection tab (Figure 2).3. Keep the battery door closed while you pull and remove the battery protection tab.4. Immediately after you remove the battery protection tab, a brief audio/visual sequence will occur as the PocketPass powers up. Refer to the Ready to Go section in Table 1 for a description of the audio/visual signals. 5. If the Ready to Go sequence does not occur, remove and reinstall the batteries as described in the PocketPass Battery Replacement section of these instructions. PocketPass Installation and Removal Required Supplies• PocketPass• Commercial glass cleaner and paper towelsInstallation Locations for PocketPassPocketPass should be mounted on the interior windshield, with the longest side parallel to the bottom of the windshield. Other tags should be kept at least 3 inches away from the PocketPass. The area on the dashboard beneath the PocketPass must be kept clear of paperwork and metallic items. 1. If the vehicle has a one-piece windshield, the PocketPass should be mounted as close to the bottom center of the windshield as possible; at least 3 inches away from the windshield frame or dashboard, and above the windshield wipers (Figure 3). Figure 2 – Remove Battery Protection Tab
Download:
Mirror Download [FCC.gov]
Document ID3387500
Application IDLUZ70SfcKfye5h78/86ubQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize202.41kB (2530066 bits)
Date Submitted2017-05-11 00:00:00
Date Available2017-11-07 00:00:00
Creation Date2016-10-19 09:12:33
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2016-10-19 09:12:37
Document TitleUser Manual
Document CreatorAdobe InDesign CC 2015 (Windows)
FCC ID Filing: FIH05985

Navigation menu