TrekStor CFPN5SW02464 Trekstor Primebook C13B User Manual
TrekStor GmbH Trekstor Primebook C13B
TrekStor >
Contents
- 1. User Manual
- 2. User_Manual
- 3. User manual
User Manual
User_Manual
1
14” Notebook PC
WINBOOK
CW140
Quick Start Guide
2
I.System Layout
Touch Pad
Front Camera
Keyboard
Charge/Power light
3
Top Cover
Power Button
USB Port
SD Card Reader
Bottom Cover
Speaker
Charge Port
USB Type-C Port
Headphone Port
Char
g
e Indicato
r
USB Type-C Port
SSD Cover
4
Specifications
Processor Intel Core i5-8250U
Intel® UHD Graphics 620
Memory 8GB DDR4
SSD
1st port support PCIE/SATA
2nd port SATA only
256GB SSD Preinstalled
Wireless Intel 8265 onboard 802.11 ac/a/b/g/n+BT4.2
Touchscreen 14" 1920*1080 IPS
10-point multi-touch
Webcam 1.0MP
Battery 7.6V/45WH
Input/Output
1 x USB2.0 port
1 x Type-C (Full Function)
1 x Type-C (Data Only)
1 x Charge
1 x Micro-SD card slot
Speaker & Mic Built-in Speaker x 2
Internal MIC x 2
AC-Adapter DC,19V/2.37A
5
Dimension (mm) 13.03in x 9.02in x .68in
Weight 4.12 lb
Applicant: International Products Sourcing Group
Product: 14’’ Notebook PC
Model: CW140
FCC ID: 2AOBMWBCW140
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. Any Changes or modifications not expressly
approved by party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device has been tested against the FCC body SAR limit (1.6 W/kg). To comply with
FCC RF exposure requirements, use the accessories should not contain metallic components
in it's assembly. The use of accessories that do not satisfy these requirements may not comply
with FCC RF exposure requirements and should be avoided.
Note:indoor use only for 5150-5250MHz.
FCC RF warning statement: the device has been evaluated to meet general RF exposure
requirement , The device can be used in portable exposure condition without restriction.
To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0 cm
separation distance between the user's body and the back of the handset.