Truly Instrument TET351 Infrared Ear & Forehead Thermometer User Manual

Truly Instrument Ltd. Infrared Ear & Forehead Thermometer Users Manual

Contents

2ABG7-TET351_User manual Rev0

Infrared Ear & Forehead Thermometer Thank you for purchasing infrared ear thermometer. Please read through this manual before using the product.● For babies below 12 months: Pull ear smoothly backward. ● For children above 12 months old and adults: Pull ear smoothly upward. How to pull the ear Product Description1. Probe2. LCD display3. Power/memory button4. temperature mode button : ear or forehead5.Measurement button6. Battery coverNormal body temperature range according to World Health Organization(WHO)earOralAxillaryRectal35.8 - 38 oC oC36.6 - 38 oC oC34.7 - 37.3 oC oC35.5 - 37.5 oC oCProduct Application For measurement of body temperature through eardrum and forehead.1.Do not drop or shock the unit.2.Do not immerse the unit into water.3.Keep the unit out of reach by children.4.If the unit does not function,contact the dealer.5.Consult doctor if the result of measurement is out of normal body temperature range.6.Do not disassemble the unit. Open the battery cover only when replacing battery.7.Dispose used battery according to local recycling regulation.8.The product function maybe reset when it is subjected to electrostatic discharge disturbance test. Just follow the instruction described in this manual to set the function again for normal operation. Cautions1.One second measure time.2.LCD display for easy measurement reading.3.Backlight display.4.Memory for 30 readings.5.Auto power off.Special FeaturesMeasurement Principle Measuring the temperature of the eardrum and forehead with infrared.Cautions 2Special Features 2Measurement Principle 2Product Application 3Product Description 3Ear Measurement 3Connect iOS device via Bluetooth 5Correct Measurement Method 6When the Measurement Result is Abnormal 6Memory Function 7Unit (oC/oF) Switch 7Replacing the Batteries 7Cleaning and Care 8FCC Statement 8Product Specifications 10Display Message 10Contents-1-eardrum Ear canaloC36.8Lower measured temperatureeardrumEar canaleardrumEar canal2.For accurate result, clean the probe with cotton bud before measuring. 1.Ensure the probe is facing eardrum in straight line. Otherwise, the measured temperature will be lower than the actual body temperature. Correct Measurement MethodWhen the Measurement Result is Abnormal1.Possible causes for high temperature:● After exercise, meal, or crying.● Prolong is staying in high temperature environment.● Thermometer is taken out from low temperature environment. Keep the thermometer in room temperature for at least 30 minutes before using.2.Possible causes for low temperature:● The probe is dirty.● Just exposed in cold temperature environment before taking measurement.● Forehead: The probe is not facing forehead instraight.● The thermometer is pulled out from the ear before measurement complete.● The probe is not fitted snugly into the ear canal.● The probe is not facing the ear drum or is not placed in a corretive position in the canal. See “Correct Measurement Method”.● Excess ear wax build-up.3.Temperatures measured from left and right ears are different: There could be slight difference in temperatures when taking from both ears. Therefore, always take the temperature from the same ear.This thermometer is powered by 2 AAA batteries. When the power islow, the low battery signal isdisplayed. To replace batteries:1.Press and push the battery cover to open it.2.Remove the old batteries and replace with new ones. Make sure the batteries are in right polarity direction.3.Close the battery cover. Note:To protect the environment, dispose of empty batteries at your retail store of at appropriate collection sites according to national or local regulations. Memory functionThis thermometer stores the last 30 temperature readings.● When power on, press power/memory button to recall first reading.● Repeat pressing power/memory button to recall the next reading.● Delete memory: Press both power/memory and measurement buttons and hold for 3 seconds. The signal “Clr” displayed and the memory will be deleted.Cleaning and care1.Use a soft, dry cloth to clean the exterior of the thermometer.2.Keep the thermometer away from direct sunlight, dust and contamination environment.3.Store the thermometer in normal room temperature, or within 10-40oC. Display message Situation Solution Allow the thermometer remain in room temperature(10-40 C) for 30 minutes. Ambient temperature is out of operating range (10-40 o o C)Sensor error Contact the dealer.Contact the dealer.Temperature measured is higher than normal humantemperature range(above 42.2 ) oC oCCheck the measured object and take a new measure.Temperature measured is lower than normal human temperature range (below 34 ) Check the measured object and take a new measure.Low battery Replace batteries.Memory error Display MessageMeasurement method 34-42.2 oCAccuracy +/-0.2oCo+/-0.3 C (ambient temp.1 secondLCD displayStores last 30 readings Auto power off 1 minute after not being used 2 x AAA batteries Operating temperature -20~+55 oCDimensions 152 x 52 x 36 mm66g (notincluding batteries) Infrared measurementMeasurement rangeMeasuring time DisplayMemory Batteries oC10-40Storage temperature WeightoC (ambient temp.16-35 ) o C, 35-40 o C)10-16Product SpecificationsReplacing the Batteries-6- -7 -8- -10- -11--9--2- -3- -4-This appliance conforms to the following standards:EN60601-1: Medical electrical equipment Part 1: General requirements for safetyEN12470-5: Clinical thermometers Part 5: Performance of infrared ear thermometers (with maximum device)93/42/EEC : Medical Device DirectiveASTM E 1965-98: Standard Specification for Infrared Thermometers for Intermittent Determination of Patient TemperatureMODEL: TET-351User ManualRev.00 Forehead: While taking the temperature, the screen indicates and audible bips sound. As soon as the probe is placed on the area of the temple, release the button, wait for the validation sound beep before removing the thermometer.4.Interval Between Measurements If you need to take another measurement, allow an interval of 8 seconds until the signal “oC (oF)” flashes. If you press the Measurement button within 8 seconds, the beep signal will be sounded.5.Turn off the thermometer ● Push Power/memory button until the “OFF” signal is displayed. ● The thermometer will turn off automatically without use for 1 minute.2.Infrared: Start measuring Pull ear smoothly to flatten ear canal and place the probe facing eardrum in straight line. Press measurement button until you hear the beep signal.note: Press the button to select the forehead mode.3.Measurement result When the measurement is complete, the temperature will be displayed with backlight. not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user’s authority to operate this equipment. FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipmentgenerates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will -5-Connect iOS device via Bluetooth 1. InstallationPrior to first use, Download and install application to your iOS device. (Bluetooth 4.0 capabilities, e.g. iPhone 4S, iPhone 5, NewiPadand iPadMini).2. Open application, and then press the Blood Pressure icon on Measure screen. 3. Press the “Enter” button. 4. Press the “Thermometer” button. 6. This thermometer stores the last temperature readings:5. When the measurement is complete, the temperature will display on Thermometer monitor & save on iOS application screen. oCEar Measurement1.Press Power/Memory button Ready signal beep + All display + last measurement result + Ready display The " " symbol is blinking.Unit (oC/oF) SwitchWhen the product is in off state, press and hold "power/memory" button for 10 seconds until the display shows "oC" or "oF" altenately. Release the button when the display is showing your desired unit.123465

Navigation menu