Twinhead T8N Tablet PC User Manual T8N appendixA EN

Twinhead International Corporation Tablet PC T8N appendixA EN

Contents

UserMan

U
Us
se
er
r
s
s
M
Ma
an
nu
ua
al
l
ii
Table Of Contents
CHAPTER 1
GETTING STARTED 1
Getting Started ................................................................................... 2
Inventory ............................................................................................. 3
Safety and Maintenance .................................................................... 4
Checklists ........................................................................................... 5
Features .............................................................................................. 6
Where to Look For Information......................................................... 6
Quick Start.......................................................................................... 7
Loading Windows .............................................................................. 8
Adjusting the Volume ........................................................................ 9
Turning off Your Computer............................................................. 10
CHAPTER 2
GETTING STARTED 12
Hardware and Software ................................................................... 12
Front View......................................................................................... 13
Right View......................................................................................... 14
Top View............................................................................................ 15
Bottom View...................................................................................... 16
Power Indicators .............................................................................. 17
Front View buttons........................................................................... 18
Function Keys .................................................................................. 19
Touch Pen......................................................................................... 19
Connecting the Floppy Disk Drive ................................................. 20
Disk Drives........................................................................................ 20
The CD-ROM, DVD-ROM, or Combo Drive..................................... 21
Connecting the Printer .................................................................... 21
The PCMCIA Card Slot..................................................................... 21
CF (Compact Flash) Card Slot ........................................................ 22
Memory.............................................................................................. 22
Communication Components......................................................... 25
CHAPTER 3
MAKING CONNECTIONS 27
Making Connections........................................................................ 28
Right Side Connectors .................................................................... 28
iii
Top Side Connectors....................................................................... 30
CHAPTER 4
SYSTEM SOFTWARE 33
System Software .............................................................................. 34
System Recovery ............................................................................. 34
CHAPTER 5
POWER MANAGEMENT AND USING SOFTWARE 37
Power Management ......................................................................... 38
When to Replace the Battery .......................................................... 40
Heat Considerations ........................................................................ 40
Using Software................................................................................. 41
APPENDIX A
STATEMENTS 43
Statements........................................................................................ 44
European Notice............................................................................... 46
Safety CAUTION............................................................................... 46
Canadian Department of Communications ................................... 47
Battery Disposal............................................................................... 48
CAUTION FOR ADAPTER................................................................ 48
BATTERY CAUTION......................................................................... 48
C
Ch
ha
ap
pt
te
er
r
1
1
I
In
nt
tr
ro
od
du
uc
ct
ti
io
on
n
Chapter 1 — Introduction
2
Getting Started
Congratulations on your purchase of a Tablet PC. The Tablet PC is a
fully functional PC with built-in LAN, and wireless Connectivity. With
your Tablet PC you will be able to organize and access important
business and personal information. In addition, you will be able to
send and receive e-mail and access the Internet.
This Manual contains all the information you need to set up and use
your Tablet PC. It describes all the features of the Tablet PC in an
easy-to-read yet thorough manner.
Introduction — Inventory
3
Inventory
This Tablet PC is designed for years of productive and pleasurable
computing. Use this section to keep details of your purchase. This
information will be required should you need to make repairs to your
Tablet PC during the warranty period. Update this section when you
add new options.
DATE OF PURCHASE:
PLACE OF PURCHASE:
DEALER'S NAME:
DEALER'S ADDRESS:
TELEPHONE:
E-MAIL ADDRESS/WWW:
CONTACT PERSON:
MODEL NUMBER:
SERIAL NUMBER:
Chapter 1 — Introduction
4
Safety and Maintenance
You can use your Tablet PC under a wide range of environmental
conditions. However, to ensure long use and continued high
performance, consider the following factors when setting up your
Tablet PC:
Follow all warnings and instructions noted in this documentation
and in the Windows Help program.
The first time you use your Tablet PC, we recommend that you
carefully read the Making Connections section of this manual
and initialize the battery to ensure optimum battery performance.
Unplug the Tablet PC from the power outlet before cleaning. Use
a damp cloth for cleaning. Do not use aerosols, solvents, or
strong detergents.
Slots and openings in the system cabinet are for ventilation
purposes. Do not block or cover these openings or the system
could overheat. Do not use or store the Tablet PC near a source
of heat or dust.
On the base or rear panel of this Tablet PC, there is a label with
information on the power requirements of this system. These
requirements must be followed. If you are unsure of your local
power supply, consult your dealer or local Power Company.
Do not step on or place anything on the power cord.
If you use the Tablet PC with an extension cord, ensure that the
total ampere ratings of all the devices sharing the extension do
not exceed the rating of the extension cord or the rating of the
wall outlet.
Never push foreign objects into the Tablet PC through any of the
slots or openings. Dangerous voltages are present, which could
cause electric shock or fire, or damage sensitive components.
Introduction — Checklists
5
Checklists
After opening the package, carefully inspect the contents. If any of the
items is missing or appear damaged, contact your dealer. The
shipping carton should contain the following:
STANDARD
A Tablet PC with a hard disk drive
A standard battery
An AC adapter with power cord
User's Manual
Driver CD
OPTIONS
The following items are normally optional, but some vendors may
include them in the standard package. Some items may not be
available in some countries, or some vendors may choose not to carry
all the items.
512MB/1GB SODIMM memory card
Rugged carrying bag
Hand strip
Normal capacity battery
Second battery
WLAN module
Bluetooth module
Caution: When purchasing any of the accessories
listed above, purchase only those accessories that
are approved for use with your Tablet PC. The above
accessories are proprietary items. Your system
vendor can obtain these approved accessories. If
you use items that are not approved for use with
this Tablet PC, you may cause your Tablet PC to
malfunction, or to emit or receive electro-magnetic
radiation in excess of local regulations. For non-
proprietary accessories such as PC cards or
printers, ensure that the accessory functions
properly in your Tablet PC before making the
Chapter 1 — Introduction
6
purchase. Your system vendor may be able to
recommend reliable brands and models.
Features
Software Included
Widows® XP Tablet PC Edition which includes:
Microsoft® Internet Explorer
Microsoft® Outlook Express
Microsoft® Windows Media Player
High performance Processors
Ultra Low Voltage Mobile Intel Dothan 1.1GMhz CPU or above FSB
400Mhz CPU
High Capacity Hard Disk Drive
The Tablet PC has a high capacity hard disk drive, to store your favorite
programs and large multimedia files.
Built-in Wireless LAN, Modem and LAN Capability
A built-in 802.11a/b/g, 56k modem and 10/100/1000 Mbps Ethernet port
allows you to access the Internet or a local area network (LAN).
Where to Look For Information
About Your Tablet PC
This User’s Manual describes the key elements of your Tablet PC.
New users can find a simple step-by-step orientation in the Quick
Start section of this chapter.
About Windows
Windows Online Help, found on the Start menu, offers extensive Windows
assistance. Welcome to Windows offers an online orientation for new
Windows users. Find it in:
Start/Programs/Accessories/System Tools.
Introduction — Quick Start
7
Quick Start
Turning on the Tablet PC for the First Time
1. Connect the AC adapter power cord to the AC adapter.
2. Connect the AC adapter to the DC power port on the bottom side of
your Tablet PC.
3. Connect the AC adapter power cord to an AC outlet.
4. Press the power button to turn on the power.
Note: The battery is not fully charged. Allow
your battery to fully charge before using it
(i.e., before disconnecting AC power).
Calibrating the battery before use is also
highly recommended. Refer to Chapter of Power
Management, for further information.
Chapter 1 — Introduction
8
Loading Windows
The following section is for installing the Windows operating system
only. If you are installing a different operating system, please check
with your vendor for installation details.
Product key number
Your Tablet PC will
begin loading Windows
once you turn on the
power. Wait a few
seconds for Windows
setup to load. The
Windows setup will
prompt you for the
product key number,
shown to the right:
Note: The product key is on a sticker
attached to the bottom of the Tablet PC.
1. Type your name, and, if applicable, the name of your company.
2. Read the End User's License Agreement. Click Next to accept it.
3. Enter the product key number. You can find this on the
Certificate of Authenticity on a sticker attached to the Tablet PC.
Click Finish.
4. The Start Wizard will prompt you to set the date, and your local
time.
After the Start Wizard updates your system settings, the Welcome to
Windows screen will appear. You may disable this feature by clearing
the check box labeled show this screen each time Windows starts.
Some software comes preloaded with Windows. New users can
familiarize themselves with this software by selecting Programs from
the start menu, then clicking on programs to run them.
Introduction — Adjusting the Volume
9
Adjusting the Volume
You can adjust the volume with hot key:
Fn + Arrow Up: volume up
Fn + Arrow Down: volume down
Alternatively, you can adjust
the volume with the Windows
volume control applet located
on the taskbar.
Adjusting the Brightness
Use the following hot key combinations to adjust the LCD panel
brightness:
Fn + Arrow Left: decreases the brightness
Fn + Arrow Right: increases the brightness
Chapter 1 — Introduction
10
Turning off Your Tablet PC
Turning off the Tablet PC Tablet PC properly is important to
maintaining your Tablet PC.
1. On the Start menu, click
Shut Down. 2. Click the radio button next to
Shut Down in the Shut Down
Windows screen, and then click
OK.
If you are going to be away from the Tablet PC for a short period,
there are ways of conserving power without shutting down the system.
Warning: Shutting off the Tablet PC improperly
may result in data loss.
C
Ch
ha
ap
pt
te
er
r
2
2
G
Ge
et
tt
ti
in
ng
g
S
St
ta
ar
rt
te
ed
d
Chapter 2 — Getting Started
12
Hardware and Software
This chapter introduces the different components and controls of your
Tablet PC, including the hardware components, the software, and the audio
and video systems.
Getting Started
Before you begin using your Tablet PC, read this chapter to familiarize
yourself with the main components installed in the system.
Getting Started — Front View
13
Front View
1. Speakers
2. Security button
3. Function button
4. Quick Launch Button
5. Backspace button
6. Numeric / Multi-fun. button
7. Tab button
8. Enter button
9. Up/Down (Volume Control)
button
10. Left/Right (Brightness
Control) button
11. Internal microphone
12. Wireless LAN LED
13. HDD Access LED
14. Battery charge status LED
15. Power source indicator
16. LCD panel
17. Power button
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
16
Chapter 2 — Getting Started
14
Right View
1. CF card slot
2. Microphone-in jack
3. Audio-out jack
4. USB port
5. RJ-11 jack
6. DC-adaptor port
7. Multi IO connector
8. RS232 serial port
1
2
4
3
5
6
7
8
Getting Started — Top View
15
Top View
1. RJ-45 jack
2. PC card slot
3. Mini USB port
4. Pen tether hole
1 2 3 4
Chapter 2 — Getting Started
16
Bottom View
1. Back hand strap foot screw
2. Reset button
3. RF On/Off button
4. Touch pen holder
1
2
3
4
Getting Started — Power Indicators
17
Power Indicators
The power indicators show which power source the system is using. They
also show battery status and low battery power alerts. The power indicators
remain active and viewable even when the LCD panel is closed.
Icon Light Description
Blue Wireless LAN/Bluetooth
is in use
Green Tablet PC is reading
from, or writing to the
built-in hard disk.
Green Battery fully charged
Orange Battery charging
Flashing
Red
Battery power critically
low
Blue Power is on and the
battery is in use
Flashing
Blue
Power is in suspend
mode
Chapter 2 — Getting Started
18
Front View Buttons
The seven hot keys are unique features of your Tablet PC. The function
as follows:
Icon Function
Power Button
The Power button turns system on and goes into
standby automatically. If the unit has been sitting
unused for a while. Press momentarily to turn on
the system or to exit from standby. Press and hold
for at least 3-4 seconds to turn off the system.
These settings can be changed.
Security Button
Similar function as pressing Ctrl+Alt+Delete on a
standard keyboard.
Function Button
Access to secondary operation of some buttons
on the front bezel (shown in the illustration
above),user set up.
Backspace Button
Same function as on a standard keyboard
Quick-Launch Button
Can be assigned to launch specific windows base
program as a quick-launcher
Enter Button
Same function as on a standard keyboard.
Tab Button
Same function as on a standard keyboard.
UP/Down Button
Same function as on a standard keyboard.
Left/Right Button
Same function as on a standard keyboard.
Getting Started — Function Keys
19
Numeric Key
Same function as on a standard keyboard.
Function Keys
Hold the Fn key while pressing the function key.
Function key Description
Fn + Down Volume down
Fn + Up Volume up
Fn + Left Brightness Decrease
Fn + Right Brightness Increase
Fn + 0 Switch Touch Screen / Digitizer input mode
Fn + 7 Screen Rotate From Portrait (Screen Rotate
90 degree) to Landscape(Default) Mode or
vice versa
Fn + 9 Escape same as standard Keyboard
Fn + 4 Trigger keypad LED backlight
Touch pen
Chapter 2 — Getting Started
20
The button located directly on the touch pen is the same in function as
right buttons on the mouse. Clicking button makes selections to
perform a variety of other functions depending on the software. To
select an object, first move the pointer over the object you want.
Connecting the Floppy Disk Drive
Your Tablet PC comes with
a USB port 1.44 MB floppy
disk drive (FDD is
optional). The FDD is “hot
pluggable,” so you do not
have to power down the
Tablet PC to connect it.
Disk Drives
Your Tablet PC comes with several components for reading and writing
(recording) information.
Floppy Disk Drive
The floppy disk drive provides a convenient way of storing and transferring
small files. The disk drive uses standard 3.5-inch, 1.44 MB disks. To use
the disk drive, insert a disk (label side up) into the drive slot and slide it all
the way in. To eject the disk from the drive, press the eject button. When
the Tablet PC is reading from or writing to a disk, the disk indicator light will
flash. Do not try to eject the disk when this light is active or you may lose
data.
Hard Disk Drive
The hard disk provides high-capacity storage and fast access. Windows
and most programs are stored here. Your Tablet PC identifies the hard disk
drive as drive C.
Floppy Disk Drive
USB connecto
r
Getting Started — The CD-ROM, DVD-ROM, or Combo Drive
21
The CD-ROM, DVD-ROM, or Combo Drive
Your Tablet PC comes with the CD-ROM, DVD-ROM, or Combo drive (It is
optional). The CD-ROM drive is a read-only drive. It cannot be used to write
data to a recordable CD. The CD-ROM drive can read data from CDs,
including audio or video CDs. The CD-RW can perform these same
functions, as well as record information to writeable CD's. The DVD drive
can read both DVDs and CDs. Your Tablet PC identifies the drive with the
letter following the hard drive letter. If your hard drive is D, then the CD-
ROM drive will be E.
Connecting the Printer
To connect a printer to your Tablet PC via the USB port, use the supplied
USB to printer adapter cable.
Note: Before use, you must install the driver for
the adapter cable.
The PC Card Slot
Your Tablet PC includes card slot which supports PCMCIA Type II, 32-bit
CardBus,
Note: Please read the instructions included with
individual PC cards. Some cards may be inserted
with power on, while others require that the
Tablet PC be turned off.
Chapter 2 — Getting Started
22
CF (Compact Flash) Card Slot
The CF card slot can be used as an interface between your Tablet PC and
a variety of devices, Insert a CF card in the CF Card Slot as shown below
unitl it snaps into place. Press the eject button to release the card.
Memory
Adding memory allows the Tablet PC to operate faster, handle more tasks
simultaneously, and work more smoothly with large files. Users who
increase memory demands - by adding additional programs, for example -
may notice a slowdown in operating speed, and wish to increase memory.
The Tablet PC includes a memory card slot for adding additional memory.
Note: Use only 1-inch DDR II SODIMM modules.
Calculate memory size by adding the size of the memory module to the
existing built-in memory. For example: 512 MB (module) + 256 MB (built-in
memory) = 768 MB Total
Getting Started — Memory
23
Replacing a Memory Card
Warning: Memory modules can be easily damaged by
static electricity. Leave the module inside its
static-proof bag until it is ready for installation.
Removing a Memory Card
1. Turn off the Tablet PC and disconnect the AC adapter. Turn the
Tablet PC upside down and lay it on a flat surface.
2. Carefully remove the two RAM compartment cover screws and
remove the RAM compartment cover.
3. Carefully remove the Bluetooth module screws ,unplug
buuetooh harness then remove bluetooth module .
4. Gently pull tabbed latched in the direction of the arrows (1). The
card will pop up slightly.
5. Pull upwards on the card and then slide the card out (2).
Chapter 2 — Getting Started
24
Inserting a Memory Card
1. Hold the memory card by its edges with the edge-connector
side towards the slot.
2. Hold the card at a shallow angle (about 25 degrees) and insert
the edge connector into the connector slot (3). The “gold teeth”
of the edge connector should no longer be visible when the
card is fully inserted.
3. Press the card downwards so that it is flat inside the
compartment (4). You may hear an audible click as the latches
of the connector lock the card in place.
4. Replace bluetooth module, attach harness and secure it with
screws.
5. Replace the RAM compartment cover and secure it with the two
screws.
Your Tablet PC will automatically detect the change in RAM capacity when
it restarts.
Getting Started — Communication Components
25
Communication Components
This system includes built-in Fax/Modem.
Fax/Modem
A phone jack on the top side of the Tablet PC allows you to connect to the
Internet to send and receive data. When used with fax software, it can be
used as a fax. When using this function, first plug the phone cord into the
jack.
Anti-electromagnetic wave clip
To eliminate electromagnetic waves, it is strongly recommended that you
thread the USB cable or phone cord through the clip provided as shown
below when using USB peripherals, audio-out jack or connecting to a
phone line.
Attention:
When using the data communications function, please do
not plug the phone cord into the ISDN or PBX jack to
avoid an electrical surge that will cause the MDC
module to burn.
C
Ch
ha
ap
pt
te
er
r
3
3
M
Ma
ak
ki
in
ng
g
C
Co
on
nn
ne
ec
ct
ti
io
on
ns
s
Chapter 3 — Making Connections
28
Making Connections
Your Tablet PC is equipped with a full array of ports and connectors,
including standard input/output (I/O) ports for quickly and easily adding
peripheral devices such as printers, keyboards, and mice. Refer to
documentation included with individual devices for details on
connecting these devices to your Tablet PC.
Right Side Connectors
1. CF Card Slot
Accepts devices that are designed to use CF card interface. Insert a
CF card in the CF Card Slot as shown above until it snaps into place.
Press the eject button to release the card.
2. Microphone-in Jack
Connect a microphone this jack to record audio.
3. Audio-out Jack
Connect a stereo headset or external speakers to this jack to listen to
multimedia.
4. USB (Universal Serial Bus) Ports
The Universal Serial Bus (USB) is the latest standard for attaching
monitors, input devices, scanners, and other devices to a PC. USB
devices can be chained together on a single cable.
3
2
1
4
5
6
8
7
Making Connections
29
5. Fax/Modem RJ-11 Jack
The fax/modem can transmit data using the 56 Kbps V.90 protocol,
and send and receive faxes at 14.4 Kbps. In some countries, local
regulations may not permit the use of the fax/modem designed for this
system. In this case, you may use a PCMCIA modem.
6. DC-in Jack
Connect the DC power cable from the AC adapter to this jack.
7. Stand D-Sub RS232 Port
8. Multi IO connector
The Connector is reserved for specific purpose which is used to
connect to customer’s device.
Top Side Connectors
1. LAN RJ-45 Jack
With the built-in Ethernet LAN combo, you can make LAN connections
without installing PC cards. Connection speed is 10/100/1000 Mbps.
When using the LAN function, wrap your LAN cable around the EMI
ferrite suppression box to inhibit electromagnetic interference.
1
2 3
Chapter 3 — Making Connections
30
Warning: Plug your modem into an analog telephone
jack only. Most homes use analog lines. Do
not use digital lines, such as the PBX and
ISDN systems found in many offices. Digital
lines may damage your modem.
2. PC Card Slot (PCMCIA)
Insert a PC Card (PCMCIA) card in the PC Card Slot as shown above
until it snaps into place. Press the eject button to release the card.
3. Mini USB port
The Universal Serial Bus (USB) is the latest standard for attaching
monitors, input devices, scanners, and other devices to a PC. USB
devices can be chained together on a single cable. This mini-USB port
can only play as host role.
C
Ch
ha
ap
pt
te
er
r
4
4
S
Sy
ys
st
te
em
m
S
So
of
ft
tw
wa
ar
re
e
Chapter 4 — System Software
34
System Software
Software List
Operating System
Your hard drive already contains all the software you need to operate
the Tablet PC.
Audio and Video Drivers
These utility programs and drivers are included for the PC Card drive,
the sound system, and the graphics sub-system.
System Recovery
Before you start
Your system includes Phoenix Recovery System in original hard disk.
Follow the steps in the appropriate section below to recover the
operating system and the system software.
The factory has pre-partitioned your system's hard disk, so you
may directly install the system software; however, if you change
a new hard disk, you must first partition it.
If you reinstall your operating system, all of the data
originally on the hard disk will be overwritten. Before
reinstalling the operating system, carefully backup any
important data.
Caution: When you re-install operating system by
Recovery CD for Windows, we STRONGLY recommend
connecting the AC adapter do NOT use battery
alone to avoid warning message.
System Software — System Recovery
35
Recovering Windows and Original Software
(Instant Recover – Option depends on customer’s
configuration)
If your Windows operating system is lost or damaged, use the Instant
Recovery System Software.
Instant Recovery Software
No need to locate a recovery CD to restore your software settings, it is
already pre-installed on your notebook hard drive. Simply follow the
steps below and restore your notebook to the original factory settings.
How to Access Your Instant Recovery Software
1. Turn your computer on and press Fn +4 when booting logo appears.
2. Click Protect/Recover on left hand menu.
3. Click Phoenix FirstWare Recover Pro.
4. System restarts and will take 15 seconds until the next step is
displayed.
5. From Phoenix FirstWare Recover Pro Quick Start, click Pick
Backup Point.
6. From Recover Pro, Factory Restore Point is the default selection.
Click Restore.
7. From the Recover Pro prompt, click Yes.
8. FirstWare Recover Pro will load.
9. Click Recover Entire Drive.
10. Prompt appears, click Yes.
11. Recovery begins.
C
Ch
ha
ap
pt
te
er
r
5
5
P
Po
ow
we
er
r
M
Ma
an
na
ag
ge
em
me
en
nt
t
a
an
nd
d
U
Us
si
in
ng
g
S
So
of
ft
tw
wa
ar
re
e
Chapter 5 — Power Management
38
Power Management
Checking the Battery Level
You can check the remaining battery power in the Windows® battery status
indicator located at the lower right-hand corner of the task tray. The Battery
Status icon only appears in the task tray while the unit is running on the
battery power but not while the unit is running off an external power source
through the AC adaptor.
Battery Power Indicator
Enter
Monitoring Battery Power
There are two ways to
monitor how much power the
battery has left.
1. Click Start / Settings /
Control Panel / Power
Options then click
Power Meter.
2. Moving the cursor to the
battery icon on the
taskbar is the simplest
way to check on battery
power status.
If you do not see the battery icon, enable it in Start / Settings /
Control Panel / Power Options. Choose the Advanced tab and click
“Always show icon on the taskbar.”
Low Battery Alarms
How your Tablet PC responds to a low battery condition is set under
Start / Settings / Control Panel / Power Options / Alarms.
Power Management — Power Management
39
Two different power alarms can be enabled or disabled: the Low
Battery Alarm, and the Critical Battery Alarm.
Warning: When battery power is low, the battery
indicator will flash red, and the alarm will
display a warning on your screen. Take immediate
action, such as saving files or connecting to the
AC adapter, or data may be lost.
Battery Charging
When you use the AC adapter to connect your Tablet PC to a power
outlet, the internal battery will automatically begin to recharge. While
the battery is charging, the Battery Charge icon on the Indicator panel
will be active after 6~12 seconds. When the battery is fully charged,
the Battery Charge icon will turn off.
If your Tablet PC is turned off, a fully discharged battery will take
about 3 hours to recharge. If your Tablet PC is turned on and is not in
suspend mode, it twill take about 8~12 hours to recharge the battery.
Refer to the following table:
Charging
System On 8~12 hours
System Off (suspend to RAM) 6 hours
Note: A fully charged Li-Ion battery can run the
Tablet PC for approximately 6.0 hours.
Chapter 5 — Power Management
40
Over time, the battery's capacity gradually decreases. We recommend
that you replace your battery when you notice that it begins to store
significantly less charge.
Changing the Battery
Change the main battery pack as
follows:
1. Turn off the Tablet PC.
2. To replace the Battery remove the
screw and the Battery Bay Cover
shown right
3. Make sure the replacement battery is properly orientated. Then
insert the battery into the battery compartment. Check that the
latch locks back into position.
Heat Considerations
The Tablet PC processor has been specially designed to consume
little power, and generates very little heat. However, working in a hot
environment, or working for long periods may raise the temperature. If
the temperature continues to rise, processor activity will be reduced.
You may notice a slight loss of performance when this happens.
Power Management — Using Software
41
Using Software
Digitizer Calibration
The touch screen is a thin membrane on the top of the LCD display that
responds to mechanical pressure on the screen’s surface. The cursor on
the screen is controlled using the stylus. If you notice the stylus tip touch-
point not matching up with the cursor, you can recalibrate the touch screen.
Calibrating the Digitizer
1. Click the Windows® Start button > Control Panel > Switch to Classic
View > Tablet and Pen Settings. Under the Setting tab, click Calibrate
and follow the on-screen instructions shown below.
Chapter 5 — Power Management
42
2. Click the stylus in the middle of the crosshairs. The wheel moves to
another location on-screen.
3. Repeat the exercise as above several times until the screen returns to
the Calibration Applet
4. Click OK, The recalibration tales place immediately upon exciting the
application. No need to restart the Tablet PC.
Calibrating the Touch Screen
1. Click the Windows® Start button > Control Panel > Switch to Classic
View > TouchSet Utility Settings. Under the calibration tab, click
Calibrate and follow the on-screen instructions shown below.
2. Click the stylus in the middle of the crosshairs. The wheel moves to
another location on-screen.
3. Repeat the exercise as above several times until the screen returns to
the Calibration Applet
4. Click OK, The recalibration tales place immediately upon exciting the
application. No need to restart the Tablet PC.
Screen Rotation
To rotate the screen the screen form Portrait to Landscape mode or vice
versa, press the Fn+7 buttons on the front of the Tablet PC. Please refer
chapter 2 in this user’s manual.
A
Ap
pp
pe
en
nd
di
ix
x
A
A
S
St
ta
at
te
em
me
en
nt
ts
s
Appendix AStatements
44
Statements
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.
Shielded interconnect cables and shielded AC power cable must be
employed with this equipment to insure compliance with the pertinent
RF emission limits governing this device. Changes or modifications not
expressly approved by the system's manufacturer could void the
user's authority to operate the equipment.
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is
subject to the following conditions:
This device may not cause harmful interference
This device must accept any interference received, including
interference that may cause undesired operation.
According to FCC 15.407(e), the device is intended to operate in the
frequency band of 5.15GHz to 5.25GHz under all conditions of normal
operation. Normal operation of this device is restricted to indoor used
environment only
Appendix AStatements
45
About The Modem
This equipment complies with Part 68 of FCC rules. On the bottom of
this equipment is a label that contains, among other information, the
FCC registration number and ringer equivalence number (REN) for
this equipment. If requested, this information must be provided to the
telephone company.
The modem jack of this equipment complies with Sub-part F of Part 68
of FCC rules.
The REN is used to determine the quantity of devices that may be
connected to the telephone line. Excessive RENs on the telephone
line may result in the devices not ringing in response to an incoming
call. In most, but not all areas, the sum of the RENs should not exceed
five (5.0). To be certain of the number of devices that may be
connected to the line, as determined by the total RENs contact the
telephone company to determine the maximum REN for the calling
areas.
If the terminal equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. However, if advance notice
isn't practical, the telephone company will notify the customer as soon
as possible. Also, you will be advised of your right to file a compliant
with the FCC if you believe it necessary.
The telephone company may mark changes in its facilities, equipment,
operations, or procedures that could affect the operation of the
equipment. If this happens, the telephone company will provide
advance notice in order for you to make the necessary modifications in
order to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact the
manufacturer for repair and (or) warranty information. If the trouble is
causing harm to the telephone network, the telephone company may
request you remove the equipment from the network until the problem
is resolved.
The equipment cannot be used on public coin service provided by the
telephone company. Connection to Party Line Service is subject to
state tariffs. (Contact the state public utility commission, public service
commission or corporation commission for information.)
Appendix AStatements
46
The Telephone Consumer Protection Act of 1991 marks it unlawful for
any person to use a computer or other electronic device, including fax
machines, to send any message unless such message clearly
contains in a margin at the top or bottom of each transmitted page or
on the first page of the transmission, the date and time it is sent and
an identification of the business or other entity, or other individual
sending the message and the telephone number of the sending
machine or such business, other entity, or individual. (The telephone
number provided may not be a 900 number or any other number for
which charges exceed local or long-distance transmission charges.)
To program this information, refer to the manual of the communication
software.
European Notice
For the following equipment: Tablet PC
Is herewith confirmed to comply with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member
States relating to Electromagnetic Compatibility (89/336/EEC), Low
voltage Directive (73/23/EEC) and the Amendment Directive
(93/68/EEC), the procedures given in European Council Directive
99/5/EC and 89/3360EEC.
The equipment was passed. The test was performed according to the
following European standards:
EN 300 328 V.1.6.1 (2004-11)
EN 301 489-1 V.1.4.1 (2005-09) / EN 301 489-17 V.1.6.1 (2002)
EN 50371: 2002
EN 60950: 2001
Safety CAUTION
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunication line cord.
Appendix AStatements
47
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock and
injury to persons, including the following:
Do not use this product near water, for example, near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the power cord and batteries indicated in this manual. Do not
dispose of batteries in a fire. They may explode. Check with local
codes for possible special disposal instructions.
Canadian Department of Communications
This class B digital apparatus meets all requirements of the Canadian
Interference-causing Equipment Regulations.
About the Modem
The Industry Canada label identifies certified equipment. This
certification means that the equipment meets certain
telecommunications network protective, operational and safety
requirements. The department does not guarantee the equipment will
operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company.
The equipment must also be installed using an acceptable method of
connection. In some cases, the company's inside writing associated
with a single line individual service may be extended by means of a
certified connector assembly (telephone extension cord). The
customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any repairs
Appendix AStatements
48
or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections
themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
"The Load Number (LN) assigned to each terminal device denotes the
percentage of the total load to be connected to a telephone loop which
is used by the device. To prevent overloading, the termination on a
loop may consist of any combination of devise subject only to the
requirement that the total of the Load Numbers of all the devices does
not exceed 100."
Battery Disposal
THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDE
BATTERY. IT MUST BE DISPOSED OF PROPERLY. CONTACT LOCAL
ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND
DISPOSAL PLANS IN YOUR AREA.
CAUTION FOR ADAPTER
THIS TABLET PC IS FOR USE WITH MODEL NO. 0335A2065 ,
0335C2065.
BATTERY CAUTION
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY
THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE
MANUFACTURER'S INSTRUCTIONS.
Regulatory information / Disclaimers
Installation and use of this Wireless LAN device must be in strict
accordance with the instructions included in the user documentation
provided with the product. Any changes or modifications (including the
antennas) made to this device that are not expressly approved by the
manufacturer may void the user’s authority to operate the equipment.
Appendix AStatements
49
The manufacturer is not responsible for any radio or television
interference caused by unauthorized modification of this device, or the
substitution of the connecting cables and equipment other than
manufacturer specified. It is the responsibility of the user to correct any
interference caused by such unauthorized modification, substitution or
attachment. Manufacturer and its authorized resellers or distributors
will assume no liability for any damage or violation of government
regulations arising from failing to comply with these guidelines.
IMPORTANT NOTE (CO-LOCATION)
FCC RF Radiation Exposure Statement: This equipment complies with
FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
SAR Exposure
This device has been tested for compliance with FCC RF Exposure
(SAR) limits in typical flat configurations.
WLAN
“To prevent radio interference to the licensed service, this device is
intended to be operated indoors and away from windows to provide
maximum shielding. Equipment (or its transmit antenna) that is
installed outdoors is subject to licensing.”
For LPD
“Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device.”
W/detachable antenna
“To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically
Appendix AStatements
50
radiated power (EIRP) is not more than that required for successful
communication.”
This Class B digital apparatus complies with Canada RSS-210.
Cet appareil numérique de la classe B est conforme à la norme CNR-
210 du Canada
The abbreviation, IC, before the registration number signifies that
registration was performed based on a Declaration of Conformity
indicating that Industry Canada technical specifications were met. It
does not imply that Industry Canada approved the equipment. (DoC)
The term “IC:” before the certification/registration number only signifies
that the Industry Canada technical specifications were met.

Navigation menu